Related
Hi, dropped it in the toilet today.
Been drying it off for 7 hours in front of a heated fan. Tried to turn it on, the HTC screen comes up but it's really faint so I took the battery out straight away.
What are the chances of it working again?
ethos84 said:
Hi, dropped it in the toilet today.
Been drying it off for 7 hours in front of a heated fan. Tried to turn it on, the HTC screen comes up but it's really faint so I took the battery out straight away.
What are the chances of it working again?
Click to expand...
Click to collapse
So you took the battery out after the 7 hours? - Not good in such cases the first thing to do is always to take out the battery - However I had a similiar problem a while ago - but with a nokia phone - local electronics store took it to repair it for free but **** happens I sim unlocked it and they told me I had to pay 200 bucks for the repair - I googled a bit and found that you should take the whole device apart and try everything seperated then put every single part into ethanol (I think it was ethanol not shure :S) over night and in the morning let it dry - repeat up to 5 times - if no hardware was fried everything should work again - my phone worked again
No, I took the battery out after like 20 seconds.
I then took it apart and wiped it off and put it in front of a heated fan for about 7 hours!!!!
I dropped my 8125 in a cup of Vodka and Sprite and took the battery out right away. Let it dry out for 12 hours, turned it on and got a white screen. Took the battery out again and decided to order an 8525 to replace it thinking it was dead. Hours later, I tried to start the 8125 again and it magically started working. Guess it was a long hangover but just shows that given enough time, it might come back.
WELL... left it in the airing cupboard overnight.
It now turns on fine, the screen is working but I can still see a little bit of water but other than that it all works fine.
Going to leave it in front of the heater again today to hopefully clear the last of it up.
CHUFFED!
To my home fish tank
My old sony eriksson drop into my fish tank.!!!
Initially it don't work.
I put phone and battery apart inside a big cup and covered it with rice and voila..., after two days it was like new.
It was an old trick form my mother.
Hope it help
Hints and tips available.
The best way to recover a water damaged device is to get yourself a good denture brush and some denatured alcohol. Take the device apart down to its base components. The board, LCD board components for your soft keys ect. The biggest problem that I've experienced is that it sometimes fries out the flash for the camera which will stay on. Now with your denatured alcohol and your brush just gentle scrub the board components and the connections this will absorb the moisture upon evaporation. Also its always good to have a nice heat gun thats also a good way to reflow contact points on the board say you have connection issues with your mini USB port. I've been doing electronics repair on PDA and cell phone devices for sometime. So anyone who has questions feel free to ask. I hate hearing about people who dump 200 dollars for a repair that you can fix by spending 5 dollars.
I would like to start a thread but since my membership is at the junior status I dont see it being read. But I will post it anyway.
C Brown said:
...I would like to start a thread but since my membership is at the junior status I dont see it being read. But I will post it anyway.
Click to expand...
Click to collapse
Sorry, I don't follow your logic. Post up what you know, based on your experience. I assure you it will be gratefully received.
Do a separate thread though, so it can be turned into a sticky by the mods.
Thanks
WB
Give it more time. I say 2-3 days to completely dry then try.
C Brown said:
The best way to recover a water damaged device is to get yourself a good denture brush and some denatured alcohol. Take the device apart down to its base components. The board, LCD board components for your soft keys ect. The biggest problem that I've experienced is that it sometimes fries out the flash for the camera which will stay on. Now with your denatured alcohol and your brush just gentle scrub the board components and the connections this will absorb the moisture upon evaporation. Also its always good to have a nice heat gun thats also a good way to reflow contact points on the board say you have connection issues with your mini USB port. I've been doing electronics repair on PDA and cell phone devices for sometime. So anyone who has questions feel free to ask. I hate hearing about people who dump 200 dollars for a repair that you can fix by spending 5 dollars.
I would like to start a thread but since my membership is at the junior status I dont see it being read. But I will post it anyway.
Click to expand...
Click to collapse
+1, the best way to clean your water damaged device and have hope of it working again.
It may take a while to work properly again; my 8525 went into water not once but twice! The first time I thought it was dead--lights on but only white screen. Had instantly removed battery and opened it up as much as I good and took some canned air to it. Kept checking it over the next week without success so went and bought another.
Anyway, about 3 weeks after the dunking I put the battery back in and on a whim turned it on and surprise!, works fine. This became my back up phone that I later took to Africa with me where I proceeded to drop it in a toilet. Since the air temp was 130 degrees it didn't take long to dry out and it's still kicking!!! Important point is to immediately remove the battery, take the device apart as much as you can, dry completely over a few days then attempt to turn on.
Hope this helps,
Steve
Mine went into the toilet this morning. I have disassembled it according to the directions (http://inuchanbt.blog54.fc2.com/blog-entry-100.html) and put it all back together after cleaning surfaces and connectors with alcohol.
It powers up now, which is far better than it was doing just after I fished it out of the pot. USB connection works, speaker phone works, etc.
However, touch screen does not. If I hold the screen at a certain angle I can see a faint outline of where water has creeped into the screen about 1/2 of the way across. Touch screen worked decently on first power up but now it does not work at all. All buttons work okay.
I am going to disassemble again after work and inspect the screen more closely. Hopefully will save me from having to replace the machine!
speckledpig said:
I am going to disassemble again after work and inspect the screen more closely. Hopefully will save me from having to replace the machine!
Click to expand...
Click to collapse
...and if its just the screen that doesnt work, thats a cheep, easy fix!
I just reassembled after cleaning again and touchscreen works.
I am going to evaluate tonight and we'll see!
Those disassembly photos were EXTREMELY helpful; thanks MUCH to whoever originally posted them.
I managed to spill an entire beer on mine, turned it off and let it dry as above,. everything worked great but the scroll wheel started to get confused as to which way i was scrolling it, cleaned as above with alcohol and no problems. Actually I have found that the scrollwheel on my tytn gets hinky every couple of months or so and have taken to cleaning it regularly, onve youget over the inital fear of opening up your baby it's a breeze.
That reminds me of my old Siemens SX1 *chuckles* i went swimming in the sea and i forgot i had it in my pocket.. after 15min i suddenly felt it.. I dashed to the shore and pulled it out of my pocket.. And it was still running! While water was dripping out!
And to be honest, i never cleaned it afterwards. i just let it dry in its current state.. but hell that SX1 has endured some hazzards, and its still working ^^
Altho a bit oldfashioned now
Anyway this is pretty offtopic i know sorry bout that
Hmmm. The keyboard doesn't work. It worked yesterday. Neither does the screen rotate when I slide.
I guess it will have to come apart again.
The connector had popped loose, or maybe I didn't connect it at all yesterday.
Anyway, works great, and the water in the backlight is noticeably less. It is drying on its own.
Fully functional 8525!! YAY!!!!!
O dropped my Atom in a mop bucket once.
Took battery out and tried to dry but was FUBAR. Sold it on eBay for $90AUD =D used that money to get a Hermes for $400AUD
ethos84 said:
Hi, dropped it in the toilet today.
Been drying it off for 7 hours in front of a heated fan. Tried to turn it on, the HTC screen comes up but it's really faint so I took the battery out straight away.
What are the chances of it working again?
Click to expand...
Click to collapse
Did you flush before dropping the phone? If not, make sure to clean out all the "brown bits"
So I am a funny guy and because I am funny I went swimming in my hot tub fully clothed, forgetting that I usually keep my phone in my left front pocket...
I'll spare you the reasons behind this and the details but I couldn't find anything on these forums about a wet Galaxy. I suppose most of you are simply more cautious than I. Anyways, I figured I will share my story and update everyone on how things work out so perhaps if somebody else succumbs to such a tragedy they will have some info and perhaps some hope.
Nearly the instant I go in the hot tub I realized my phone was in my pocket. I don't think the water had even soaked entirely through my jeans before I jumped up and pulled it out. It was definitely wet though. I through it to my brother who caught it, in a matter of about 2 seconds the screen turned on, got all liney and scrambled and the phone shut off.
I tore the battery out, SIM, and sd and rushed it to a towel to dry it off. I shook it until I couldn't get anymore water to come out of the ports and stuck it into a bowl of rice.
Now I shall wait. I think tomorrow evening I am going to move it from the rice to behind my Xbox and leave it on overnight with the warm air from the fans blowing on it and then back into the rice until Tuesday evening when I might try it.
Does anybody have any ideas? Suggestions? Some encouraging words perhaps? Anything is appreciated.
Sounds like you did all you can do.did you seal the rice bag and vacuum out all the air
Sent from my GT-I9000M using XDA App
I only ever lost one phone to water damage. But that was because it got torrentially downpoured on for about 5 minutes.
It still mostly worked, but some keys would sometimes work and sometimes not, and the microphone died.
I was an idiot though and didnt dry it out immediately. I think you might just get out of this one unscathed.
I would wait about 4 days before you put the battery back in... an air conditioner would be better since it will blow really dry air on it.. if not just stick it someplace there is lots of air flow.
I have drop a few things in the water.. once a HTC magic.. LOL it was about 10days before it would work.. but it worked great after.. just some water spots on the inside of the screen but other then that it was good.
Just make sure its really bone dry before you turn it back on. A couple days in the rice should do the trick. After that just hope you dont get corrosion. At least it was fresh water.
Sent from my GT-I9000 using XDA App
I have been through many phones (cheap dumbphones) in the past and have went swimming with a cellphone 4 times in total, . . . and also lost one in a dumpster. 2ice with one phone. I have been able to recover them successfully every single time except one.
The second time I took one of my phones in the water it was in a hot tub and I was in there for about 5 mins before I realized it. It started vibrating violently in my pocket (i guess the water connected the circuit) so I took out the battery and left it to dry for about 4 days. It worked fine after that, but about a month later the screen stopped working.
I have found that as long as it isn't in the water too long it should work fine as long as you take out the battery right away and give it enough time to dry.
Since you're dealing with an expensive phone here, I would leave it for at least 5 or 5 days to dry just to be sure. Let me know how it goes!
P.S. I just bought a Galaxy S from Bell in Canada and it is my first smartphone. I hope I can keep it out of the water, and the dumpster!
~Gregory
A good idea would be to buy a waterproof case
andrewluecke said:
A good idea would be to buy a waterproof case
Click to expand...
Click to collapse
I didn't know those existed :S
gschier said:
I didn't know those existed :S
Click to expand...
Click to collapse
Make one with a condom works great at beach for me with sand and a little water
gschier said:
I didn't know those existed :S
Click to expand...
Click to collapse
http://www.h2oaudio.com/store/water...armband-for-large-mp3-players-and-phones.html is the one for iPhone, but I'd like to find out if it fits this phone too.
Headphones: http://www.h2oaudio.com/store/waterproof-headphones.html
I've been considering buying them, because I enjoy the flexibility of being able to jog regardless of weather, without worrying if it might rain. You can also buy special double seal plastic bags, but I wouldn't trust those.
They are expensive, but probably the biggest threat to my phone is getting it wet..
If it doesn't come back to life, make sure it is ABSOLUTELY dry inside (leave it on a radiator for a week, or similar) then send it to the Service Desk people.
I had a similar issue with an iPod (got caught in a downpour on my bike), and that was the collective wisdom frm the Internet. They exhanged it for me (apparently the iPod folks don't do repairs, but just look for obvious signs of abuse, like oxidation, water, impacts).
No idea how samsug work - but as long as it's dry and the accident is quite recent, hopefully there won't be any telltale signs inside.
For the next time - DON'T switch it on until the phone is absolutely dry inside. Whipping the battery out asap to avoid shortcircuits as well.
Must say, I'm curious as to the story behind this
Sooooo... how did you say this happened again?
I don't have any more advice then the what the guys already said, but i'm sending you a lot of encouraging words. Hope it works buddy.
Otherwise, just like Paul C said, if it won't work, dry it as much as you can and send it back, maybe it'll work
Same way for a phone http://www.wikihow.com/Save-a-Laptop-from-Liquid-Damage
Well, my last phone, Samsung Omnia was actually ok with some water. It dropped in someones hottub once. It was dark there (wasnt my hottub lol) and couldnt find it. So after a minute or 5 i figured I'd call to see what would happen.
Screen turned on, and started vibrating so it was easy to find. Turned it off, took it home, opened her up, put it on the radiator and went to bed. Everything was fine the next day. Never had any problems with it after that.
try this http://dvice.com/archives/2010/08/japanese-cellph.php
Give it a few days... it will dry out and be as new.
My previous phone was a HTC Touch Diamond. I completely submerged it in water for about 5 seconds by accident and it experienced the same issues yours did. (Lines and the like).
The screen was toast (or so I thought), but the phone seemed to work via USB hook up to the computer.
So I went out and I bought a replacement phone after a couple of days. I then proceeded, late at night, to hook up my old phone to extract all information and transfer it over... while I was doing so, I was paying attention to my laptop screen, when I saw a bright light out of the corner of my eye. I looked down and my phone came completely back to life.
Moral of the story was I should have waited longer, but I did sell the newer phone for a $20 profit on kijiji.
Don't rush it like I did (unless there is warranty that covers this somehow)... it will come back.
So basically the story.. My girlfriend and I were bored just wandering around the house thinking of something to do. We went outside and she sat in the hammock which faces away from the hot tub. I thought it would be hilarious for her to turn around and I would just be fully clothed sitting in the hot tub with my slippers and all on.... I suppose it may be funny but before she even turned to see I was rushing to get out and throwing my phone at my brother telling him to get the battery out. Anyways, perhaps it was a bad idea xD and turned out to be not so funny for me. She laughed....
So what I did:
Took out the battery and dried the phone as much as I could with a towel and shaking the water out, I even sucked on the ports a bit in an attempt to get the way out haha.
Then I threw the phone into a container of brown rice which wasn't sealed, after about 3 hours of being in the container I decided to switch it to a sealed ziplock back which I squished all the air out of. For some reason this seemed more logical. I think I should have probably tried to blow dry the phone with a low heat setting first or perhaps used a vacuum to suck the water out. But I didn't.
After about 21 hours in the rice I took it out and blow dried it on the low heat setting (tested on my skin to make sure it wasn't too hot) and did that for about 20 minutes then put it into a home made wind tunnel which basically was done with a blow drier and a fan which forced the warm air into a small space that the phone was in. I left that for about 3 hours and then back into the rice for another night and day (maybe 18 hours or something, too lazy to count).
I haven't plugged it in yet and am just about to so I will stop typing now and test it.
SIM, SD card, Battery all in. Power button pressed.....
Screens on and looks great, sound works great and everything booted up just fine!
It seems as if everything is working fine, good signal to network, wifi works. It might even sound better than before jk haha. All the buttons are working and nothing on the touch screen seems to be off. No bubbles or problems visible underneath the screen. Camera works.
Everything works!!
So I hope this helps somebody out if it happens to them. Rice seems to do the trick. Don't rush it. I am so happy
Did you test your GPS? Sounds like a potential fix.
In all seriousness I'm glad this story had a happy ending, good job taking your time with it too.
Sent from my GT-I9000M using XDA App
IMO two days is not enough time for a phone to dry out completely. I would at least leave it a week before start using it regularly.
Interesting story with a happy ending.......so far lol
I also think 2 days might have been a bit quick but then that air tunnel idea was clever and i think that will have helped a lot.
As for sending phones back under warranty, i doubt that would work because as far as i know when water dries it leaves a stain. I might be wrong on that though - mines stayed dry so far
Good Luck
I bought this phone on Ebay and instantly fell in love with it. It was pretty much perfect for me, I loved the big screen for my big sausage fingers, I loved how responsive it is, etc. The only thing I wasn't in love with was the battery life, but I got used to it too.
Like any responsible owner I ordered a screen protector and a flip case the day I bought the phone. Unfortunately they did not arrive as quickly as the phone did (within three days).
So I was at work one day and had put the phone into my top shirt pocket. As there was a big spider on one of our cameras, I decided to grab a stick and remove it. I found a nice stick that I liked and threw it up in the air while walking towards the camera whistling. It was a nice sunny day and I was in a good mood, what a perfect morning. Or so I thought.
I threw the stick a little too ambitiously into the air and couldn't quite manage to catch it. It dropped on the ground in front of me. Still in good spirits and still whistling, I bent down to pick it up.
*Flap!*
All of the sudden my good mood was gone and I'm pretty sure a dark cloud swiftly moved in front of the sun.
My new shiny Desire HD was lying on the ground. Face down.
I stood there for what may have been twenty seconds, but felt like an eternity, not sure whether I dared picking up the phone. Finally I summoned enough courage to do so. To my disappointment I had to realise my worst fear, the digitiser on the phone was smashed into a hundred pieces.
For the remainder of the work day I was in a very foul mood and really quite angry with the guiltless spider.
When I arrived home karma had played a cruel joke on me and had delivered the screen protector and flip cover in my absence.
I soon started researching how to replace the digitiser and finally found a disassembly guide on the internet. It seemed somewhat complicated and had a very annoying voice doing the narration, but I ignored these signs of impending doom and pushed on. Some of my conviction that I could do it stemmed from knowing that I was quite nimble (with the exception of stick throwing).
I ordered a digitiser off Ebay and checked my mailbox twice daily for the next two weeks or so. Finally it had arrived.
I had the majority of the tools ready thought I would need, the rest I would improvise. I did not have a metal strip as was mentioned that I would need, but I found an old floppy disk and cut up the metal cover which gave me something that looked remarkably similar to what was in the video.
It took a lot of effort and a lot of pausing, rewinding and replaying the youtube video but I finally got to the stage that I had removed all parts except for the LCD and the broken digitiser.
I put the metal strip into it as demonstrated in the video. The tactile response was poor and I hoped that I had cut what I needed to cut. I spent a good half hour doing this. Then, as I did not a have an oven that I could regulate perfectly, I decided that I would take two new condoms. I washed them and dried them to get rid of the lubricant and put the screen assembly first into one and then into the other. I started the kettle and made sure that my water had exactly 60 degrees. I then dropped the wrapped package into it and let it sit for 10 minutes. I took it out and tried to remove the digitiser to no avail. Back in it went at 65 degrees for 10 minutes. Still nothing.
Then I had the idea that it might be easier to take the digitiser out piece by piece. I took a very small screw driver and took out piece after piece. This must have taken me at least an hour, but I finally got the top layer of it out. When this was done, I had a little more space to play with and I decided that I would try to cut it out from the top. It was looking really quite good and the entire assembly started moving out, but on my final cut, I noticed that I had severed the LCD cable.
After this I continued to try and cut it out, but I realised that I hadn't been as close to getting it out as I had thought. I put it into the oven which was around 70 degrees, just as an experiment. I could still not get the glue to relinquish its hold of the LCD screen.
Grumpily, I took a larger screwdriver and levered the LCD screen out. It bent but didn't crack in the process. Maybe this is what I should have done in the first place? (Not that I would recommend it)
Back on Ebay I went and ordered a new LCD screen.
Today it finally arrived. I attached the new digitiser to the new LCD screen and then started the video yet again to see how to reassemble the phone. Unfortunately it was very hard to do this as the video was in the wrong order. I downloaded the video off youtube and reversed it. Interestingly the voice was much less annoying in reverse.
During the reassembly process I wanted to blow some lint off the screen that had landed on it, along with the lint I blew the box of screws off my desk. After a good ten minutes of searching I had found all but one of the screws. I figured that it had been swallowed forever by the carpet as even my rare earth magnets couldn’t find it, or the underpants gnomes had taken hold of it somehow.
If I had thought disassembling the phone was hard, I was in for a rude awakening. Reassembling it was extremely difficult. After using what felt like a good metre of sticky tape, I finally managed to get everything back together. I figured that the missing screw probably wasn’t doing anything important anyway.
The only problem that I appeared to have was that I hadn’t glued the digitiser back in place and it was constantly in danger of falling out of the phone. I decided that I would the phone into another case that I had bought while waiting for the first one. This was a silicon case and should force the digitiser to stay inside the phone.
First I wanted to test the phone however. I put in an old sim card, my memory card and started it up. My heart nearly skipped a beat when I saw “HTC” appear on the screen. Strangely it stayed there for some time. I sighed loudly and took the battery cover off.
Checking it, I couldn’t see anything that I had done wrong. So I put it all back together and turned it on again. Again the “HTC” appeared and after a while the booting logo followed. The phone simply took a while as it was a new sim card.
When android started up, I tested features and they all seemed to work except for the reception, I just couldn’t get any. I already saw me having to buy a new phone, but then realised that I was being an idiot and that I should put my current sim card into it.
After doing so, everything worked perfectly. I was very happy. Even my plan to keep the digitiser affixed to the phone with the cover worked well.
In Conclusion: It is possible to replace the digitiser (along with the LCD), but it is very difficult.
Nice story
TTIUWP
Damn that spider ;p
Sent from my Desire HD using XDA App
Wow.... That's quite an epic tale. Glad it had a happy ending... Thanks for sharing - hope I never have to come back to this post!
Sent from my Desire HD using XDA App
I hate it when I drop my phone. Once while laying hot asphalt my blackberry landed face down on it for a few minutes before I noticed.
Ahaha 'sausage fingers', great tale and glad you got it sorted ;-)
Sent from my Desire HD on the moon...
Id be in floods of tears.. you poor man haha.
You made me laugh and cry at the same time.
I've had my TF101 for three months now, and the more I use it, the more I love it. Tried a few ROM's, got some games, watched some video I'd converted to HD mp4, played some old text based adventures. Spent time bonding.
The relationship hit a bump in the road yesterday. The Transformer fell out of its protective case (I shoulda closed the zip) and landed on the corner closest to the power button. The bezel popped away from the screen a little, there's an ugly dent, and now I can't use the power button. I push, pull & tweak it, but nothing happens, it either doesn't work at all, or locks on.
I've called Asus (in Sydney) and got an RMA number for it... guess I'll wait and see what happens. The warranty clearly states that it doesn't cover accidental damage or misuse.
Already having withdrawals.
PW
yeah sorry about your mishap man....sucks for sure!!!
i ve had my tf101 for about 2 and a half or 3 months as well and just about a week ago i had it pluged in and using it on my lap basically. thre fone rang and when i jumped up i fumbled the tab and it took a fall onto the stone infront of the fireplace. it hit on the tab and dock the corner by headphones jack and the corner by the docks sd card. Its dented and scratched in a few places but i got extremely lucky and even though it fell a good 4 ft and hit with some force it functions as intended still (knock, knock, knock) on wood.
surprised me really, seeing ive heard and seen so many people crack a screen from a 2 ft drop onto surfaces much softer than what mine hit.
i have an OG IPAD that i let the rest of the family abuse now, but when i had it i forgot it on the roof of my blazer one day and took off....At about 45 mph i looked in the rearview and watched as it hit the dirt road and bounced and slide about 30-40foot......OUCH!!!!....And it survived without a scratch the case was scuffed up a bit but that was it....
My Point is....basically these little things can be pretty tough really.
I got mine during the US launch, and had not dropped it ONCE since then ... until last week. Had it under my armpit in the Asus-branded rubbery case while toting a bunch of crap to my car. Forgot that it was under my arm when I opened the car door, and when I reached in the car to put my bag in, it fell from under my arm SMACK onto the driveway. I looked down in horror, tears welling in my eyes, quivering in terror (OK I exaggerate). Picked it up, and the only problem was the back had popped off a bit on one edge. Snapped it back into place, and all was right with the world. I was lucky that it fell flat, rear-side down, instead of on a corner I guess.
Squire-au said:
I've had my TF101 for three months now, and the more I use it, the more I love it. Tried a few ROM's, got some games, watched some video I'd converted to HD mp4, played some old text based adventures. Spent time bonding.
The relationship hit a bump in the road yesterday. The Transformer fell out of its protective case (I shoulda closed the zip) and landed on the corner closest to the power button. The bezel popped away from the screen a little, there's an ugly dent, and now I can't use the power button. I push, pull & tweak it, but nothing happens, it either doesn't work at all, or locks on.
I've called Asus (in Sydney) and got an RMA number for it... guess I'll wait and see what happens. The warranty clearly states that it doesn't cover accidental damage or misuse.
Already having withdrawals.
PW
Click to expand...
Click to collapse
After reading the thread title I was about to post a witty comment about not telling me what to do but then I dropped my transformer onto my wood floor. (karma, right?) and then I read the thread. Gosh that really does suck. Mine landed side-of-the-dock down first so my SD card shot out and got lost somewhere under the couch... I really hope they will fix it for you. From my experience Asus is really good with RMA stuff if you can talk with a real asus employee rather than their phone people and explain what happened. I had an amazing motherboard which shorted out after a month of use and they had stopped selling that exact model (sabertooth gx or somethng like that) so, instead, they gave me a better, more high end replacement for it. They also fixed my dock even though I lost my serial number (I had to pay for shipping but it was worth the 30 bucks). Like I said, good luck and I hope they don't charge you for the repairs
Squire-au said:
Don't drop your transformer onto concrete...
Click to expand...
Click to collapse
Sorry to hear about the problem, but this is just common sense...
****s happened!!!
I've dropped it on concrete from about 4 feet high.
Case took most of the impact but got a little dent.
Beside my cell phone the tf get handle a lot so sooner or later
it get dropped.
If the actual button isn't screwed up, you can probably insert a flat head under the bezel (easier in BACK!) and pry it up a little, and reseat the button (hold it with the button facing the ground) and pop the bezel back. Give or take the beds.
I'm really glad I don't have formica floors, or concrete...I keep mine in a backpack when on the go, just in case lol.
Sent from my Transformer Prime TF201 using Tapatalk
really sorry man.
got mine for a week now
i dont want to drop it
thats why i bought case and screen protector for it.
i love this thing way too much. i dont wanna break it
Dropped mine off the arm of the sofa onto carpet, it was docked and inside its neoprene case at the time. Result = screen cracked into 2 seperate peices
Guess its all down to luck in terms of damage done in accidents like this, mine is still useable but I thought the Gorilla glass would be much tougher.
Would be very interested to hear what happens with the RMA for the OP, I haven't dared contact ASUS uk for fear of the number of digits in the bill.
Had a similar incident with a happy ending
Squire-au said:
I've had my TF101 for three months now, and the more I use it, the more I love it. Tried a few ROM's, got some games, watched some video I'd converted to HD mp4, played some old text based adventures. Spent time bonding.
The relationship hit a bump in the road yesterday. The Transformer fell out of its protective case (I shoulda closed the zip) and landed on the corner closest to the power button. The bezel popped away from the screen a little, there's an ugly dent, and now I can't use the power button. I push, pull & tweak it, but nothing happens, it either doesn't work at all, or locks on.
I've called Asus (in Sydney) and got an RMA number for it... guess I'll wait and see what happens. The warranty clearly states that it doesn't cover accidental damage or misuse.
Already having withdrawals.
PW
Click to expand...
Click to collapse
I had the same incident 3 months ago. I dropped the transformer with dock in my office parking lot. It fell flat. When I pushed the power button it would not turn on. As it was an accidental drop I was sure ASUS warranty would not cover it. Still sent it to ASUS and was happy it was repaired under warranty.
Thank you so much for this warning, I was just about to try this with mine.
Low023 said:
Thank you so much for this warning, I was just about to try this with mine.
Click to expand...
Click to collapse
Stop flaming the OP ffs, he was just telling us what happens if dropped on concrete and how sturdy it is.. Jog on if you have nothing useful to say.
blickmanic said:
Stop flaming the OP ffs, he was just telling us what happens if dropped on concrete and how sturdy it is.. Jog on if you have nothing useful to say.
Click to expand...
Click to collapse
I dropped mine once in uni flew 2 meters across the room and was thankfully ok
I hve never dropped it again since or let it leave my sight so to speak
Sent from my Transformer TF101 using xda premium
Thanks for all the good wishes. I rang the service centre (Dingotech, cool name) and a very sympathetic young lady told me all I need to do to get it RMA'd. I told her what had happened, she didn't think it would be done under warranty. Ahh well. Anyways, I couriered it out to them, and they'll ring me with the quote sometime. NOT looking forward to it. So I'm forced to play with my old Advent Vega, with its cruddy viewing angles and bluetooth dropouts. I knew there was a reason I didn't sell it.
I'll keep you posted.
PW
Squire-au said:
Thanks for all the good wishes. I rang the service centre (Dingotech, cool name) and a very sympathetic young lady told me all I need to do to get it RMA'd. I told her what had happened, she didn't think it would be done under warranty. Ahh well. Anyways, I couriered it out to them, and they'll ring me with the quote sometime. NOT looking forward to it. So I'm forced to play with my old Advent Vega, with its cruddy viewing angles and bluetooth dropouts. I knew there was a reason I didn't sell it.
Click to expand...
Click to collapse
Yeah, they can hardly be expected to cover it. Your choices are either to buy insurance with accidental damage cover yourself, or just tell yourself that accidents happen, and when they happen it just means it's time for an upgrade.
I heard ASUS charges US$75 for the labor & bezel.
The same happened to my transformer. I dropped it on the corner and ruined the bezel.
However, I was able to hammer it out with a small ball peen hammer after carefully removing the bezel (which was a more difficult task than banging out the bends & dents).
It's very thin and flexible so I was just as easy to fix as it was to break.
After I put the bezel back on the only noticeable damage left were some scuffs on the metal from the fall. I just sanded them down a bit to smooth them out and it's good as new to me.
The entire process took about 15 minutes.
I once had my transformer in my bag (docked) with a steel water bottle. It was raining, and i went to jump over something, slipped, and landed on a pointy edge.
The aluminium water bottle was mangled but my transformer was fine (though i later realised that at full brightness, on a black screen there is pressure damage.)
I suppose it saved my back though.
Only dropped mine on to carpet (given, it was from four feet up), but no damage.
On the other hand, I just finished a screen/digitizer replacement for a friends iPad 2 - he had it under his kids stroller and it fell, only about two feet, on to asphalt when he went to load the stroller in to his car. The drop mangled the corner where it impacted and totalled the screen.
I hold onto mine like it's my child. I will never ever drop this... And now I'll be more careful because I probably jinxed myself.
Sent from my ADR6425LVW using xda premium
I dropped my onto concrete from about 6'. It damaged the bezel something fierce, but I have bent it back into shape. It could use some super glue to hold it into place a bit better, but I was pleasantly surprised that it is still 100% functional. My EVO 3D hasn't received nearly this type of abuse and is hardly usable.
I do agree though, don't drop it on pavement.
So,
I've dropped my NS4G countless times, and twice into water fully submerged. I freaked out every time, and when it was in water I wiped it dry and checked the battery water-indicator. Nothing, no change, no damage. This phone is a beast when it comes to physical trauma at least for me.
Anyone wanna share their stories? Or maybe horror stories of how easily it broke.
I'd say that was pure luck. My Sony Xperia Play digitizer stopped working after I applied wet screen protector (never going to use those again).
But the Galaxy S and its variants are one of the most durable phones by Samsung, it has gone downhill since. I would not recommending dropping an S3.
eksasol said:
I'd say that was pure luck. My Sony Xperia Play digitizer stopped working after I applied wet screen protector (never going to use those again).
But the Galaxy S and its variants are one of the most durable phones by Samsung, it has gone downhill since. I would not recommending dropping an S3.
Click to expand...
Click to collapse
I'll keep that in mind my dad just picked up the S3, he's lookin at Otter cases though .
My phone fall from around 1 meter into concrete, the top left corner was the first to hit the ground.. I got some marks on the plastic but that's it. Fortunately nothing major happened, although my heart stopped for a second when I saw it falling xD
Sent from my Nexus 7 using Tapatalk 2
Deep into the water a d on the floor many times. Some traces around the plastic but alive.... no way I cannot find an excuse to buy a gnex lol
Sent from my Nexus S using xda app-developers app
I've only dropped my NS4G once. Standing up in the restroom it fell out of my pocket onto the tile floor. No damage, but probably due to the TPU case I was using that day.
However, being in the consumer electronics retail workforce, I can honestly say that I've installed over 200 invisible shields on phones and tablets. Out of those, only one damaged the product. Wouldn't you know it, it was a friend's phone, but it was also about 2 years old at the time and had been dropped, therefore the edges of the screen were no longer sealed. Since she paid for the service the store replaced her phone.
Wafflcopterz said:
I'll keep that in mind my dad just picked up the S3, he's lookin at Otter cases though .
Click to expand...
Click to collapse
Don't want to scare you but you might need to watch this video. Cheers!
Posted using xda mobile app
I went swimming with my Nexus S back in July. I was is the water 10-15 minutes before I realized it was in my pocket.
Once I realized my stupidity, I went in and laid my Nexus S on a towel with the cover off and the battery out. I let it bake in the sun for about 4 hours then put it back together. It has worked great ever since.
I was actually a little disappointed. I thought this would be my excuse to get a Galaxy Nexus. Nope, can't find any excuses to get rid of my Nexus S Great phone!
Sent from my Xoom using XDA Premium HD app
I dropped mine in the toilet XD I was doing number one and was playing music. I was really into the song and didn't wanna pause it and put it in my pocket so I just held it between my shoulder and my cheek but then I dropped it lol. I quickly put my hand in the toilet to get it out, washed it THOROUGHLY and put it in a cup with rice. Everything was fine except for the speaker. 24 hrs later it fixed itself though
Survived a torrential downpour.
Day 1: it charged but didn't indicate it was charging with charger, no USB functionality.
Day 2 indicated it was charging with charger - no USB functionality After 3 days it was fully functional.
Sent from my Nexus S using xda app-developers app
had my nexus s 4g drop from... oh Id say 35 feet onto a metal nob. no- it did not survive. But I gotta say the glass is super thick, so thought the screen might have made it, but nope. $190 ebay bucks later and Im back with my NS4G
I dropped my Nexus S a couple of times from jeans pocket height unto rough garage floors. Aside from minor nicks and scratches in the bezel, phone still functions normally.
Oh yeah and I'm disappointed as well for not getting my excuse to get a GNex.
Posted using xda mobile app
Dropped twice into water
Dropped once and then took it out of water, very scared, and then pulled off the battery. Use a cold hair dryer for 30 minutes to dry it. Turned it on. Some weird functionality. No Speaker phone, no phone speaker phone.
Left the phone hopeless but tomorrow it was ok!
Nexus S is a beast!
apatal said:
Don't want to scare you but you might need to watch this video. Cheers!
Posted using xda mobile app
Click to expand...
Click to collapse
That test was too kind, see this one: http://www.youtube.com/watch?v=DuwD7pdxxyo