black screen - Galaxy S 4 Q&A, Help & Troubleshooting

I have the device for just over a week .. I am a huge and annoying defect, black screen all the time, or on the contrary to stand by black opens by itself without touching anything ... tried wipe reset, it does the same, I also disabled all motion, and the sensor call ... nothing changes ... there way to test the proximity sensor to see if it is defective or if it is some app that interfere? or I reset it again without installing anything and I feel like this? inzomma any solution before taking it a month without star service and seen that if nn err .. the time to take it back to the store is out of date (a week right?) ... not I would not even the forklift, S3 sold just yesterday ... thanks to all...
sorry my english...

skricciolo1981 said:
I have the device for just over a week .. I am a huge and annoying defect, black screen all the time, or on the contrary to stand by black opens by itself without touching anything ... tried wipe reset, it does the same, I also disabled all motion, and the sensor call ... nothing changes ... there way to test the proximity sensor to see if it is defective or if it is some app that interfere? or I reset it again without installing anything and I feel like this? inzomma any solution before taking it a month without star service and seen that if nn err .. the time to take it back to the store is out of date (a week right?) ... not I would not even the forklift, S3 sold just yesterday ... thanks to all...
sorry my english...
Click to expand...
Click to collapse
1. Do a data factory reset
2. Reflash the stock rom with Odin 3.04 followed by a data factory reset
3. If any of the above don`t work take it to the shop for repair or exchange.

gee2012 said:
1. Do a data factory reset
2. Reflash the stock rom with Odin 3.04 followed by a data factory reset
3. If any of the above don`t work take it to the shop for repair or exchange.
Click to expand...
Click to collapse
factory reset I've done, I'll try with flash...:crying: thanks mate :good:

skricciolo1981 said:
factory reset I've done, I'll try with flash...:crying: thanks mate :good:
Click to expand...
Click to collapse
Good luck mate, hope it works :fingers-crossed:

gee2012 said:
1. Do a data factory reset
2. Reflash the stock rom with Odin 3.04 followed by a data factory reset
3. If any of the above don`t work take it to the shop for repair or exchange.
Click to expand...
Click to collapse
gee2012 said:
Good luck mate, hope it works :fingers-crossed:
Click to expand...
Click to collapse
thank you, I need luck,thank bruv:good:

I9505XXUBMGA_I9505ITVBMH1_ITV.zip
is it ok?

odin the installation fails ... I'm a bit desperate to point .. I'm trying to re-download the fw, but I do not think that's the problem because it seems that odin face the md5 of the file and it is ok . ((((

no one knows why?

Related

black screen after kies flash

i've just tried upgrading to the new froyo build through kies, but on completion my phone will not turn back on. All i am getting is black screen with random vibrations. I can get into download mode though. Anyone have a link to jf3 or jm1 original firmwares so i can flash back via odin then try kies again?
Go to recovery (volup+home+power) wipe data/factory reset and it will work, happened to me also.
BaalBehrit said:
Go to recovery (volup+home+power) wipe data/factory reset and it will work, happened to me also.
Click to expand...
Click to collapse
man I cant stress this enough.. THANK YOU SO MUCH !!!!!!! After this happened to me I was ready to 1) give up, 2) try to reflash with odin 3) try something even more crazy..
and you saved my but ! I did as you said and it just started up perfectly ! Now I have froyo, all my data, and dont have to reflash or anything !
I just have one question if I may please !
I had a lagfix installed and I didnt disable it before I did the flashing, so do I still have it or what ? Because I didnt loose any data but the applications that I had instaled are not showed anymore.. which bugs me because Ill have to clean up and redo everything.. but at least Ill have a clean phone )
thanks again man !
You need to dis able lag fix before updating or anything
Sent from my GT-I9000 using XDA App
erkv said:
You need to dis able lag fix before updating or anything
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
of course I know that now , the issue with my situation would be that after I got it working (did what BaalBehrit said) the phone would boot up normaly, but all apps including of course One-click Lag fix were still there but didn't show as installed apps, nor had they any icons for that matter. Therefore disabling it before second flash was virtualy imposible.
What I did was simple. I backed all my data to my computer and then just formated both SD cards - that probably took care of the lagfix, after that, I did the flash again and everything run smoothly.
but you're right I have to remember for next time

[Q] [HELP THREAD] Airview doesn't works perfectly

hey guys I've a problem with the Airview,it doesn't works perfectly...for example when I'm on lock screen unexpectedly I see the pointer on screen that moves up and down without any reason while I have put my hands over ...or in other supported apps this problem exists.
after I do a wipe cache/dalvik cache it works fine but after a few days the problem comes back again :crying:
Does anyone have this problem? Please help...Mr @AndreiLux @wanam please help
sorry for my bad English speaking...
AvBMO said:
hey guys I've a problem with the Airview,it doesn't works perfectly...for example when I'm on lock screen unexpectedly I see the pointer on screen that moves up and down without any reason while I have put my hands over ...or in other supported apps this problem exists.
after I do a wipe cache/dalvik cache it works fine but after a few days the problem comes back again :crying:
Does anyone have this problem? Please help...Mr @AndreiLux @wanam please help
sorry for my bad English speaking...
Click to expand...
Click to collapse
U can try doing a full reset and check if that helps
I have heard many have problem after OTA update and fixes the issue on reset
123hiten said:
U can try doing a full reset and check if that helps
I have heard many have problem after OTA update and fixes the issue on reset
Click to expand...
Click to collapse
Thank You...I have do this several times but nothing has changed
AvBMO said:
Thank You...I have do this several times but nothing has changed
Click to expand...
Click to collapse
If thats the case flash a stock firmware again using Odin and reset the device after that all should be fine
Note : Do take backup of ur imprt data b4 flashing / Reseting device
123hiten said:
If thats the case flash a stock firmware again using Odin and reset the device after that all should be fine
Note : Do take backup of ur imprt data b4 flashing / Reseting device
Click to expand...
Click to collapse
yes I know this but as I said before it won't help...

[L5] Touch screen doesn't work

Hi, today I decided to make hard reset on my phone, when I did it, on entry screen my touch screen has stopped working.
ROM: CM 11
Baseband: V20d + root.
Help!
kulka5010 said:
Hi, today I decided to make hard reset on my phone, when I did it, on entry screen my touch screen has stopped working.
ROM: CM 11
Baseband: V20d + root.
Help!
Click to expand...
Click to collapse
Hey there.
I'm sorry to hear that you're experiencing this problem with your phone. Either your hardware is damaged or your software. My best guess is your software, seeing as your phone's touch screen stopped working right after you conducted a hard reset. Perhaps you can get your touch screen working again by flashing your original firmware through KDZ.
If you've got anymore problems and/or questions, feel free to ask!
TahaX said:
Hey there.
I'm sorry to hear that you're experiencing this problem with your phone. Either your hardware is damaged or your software. My best guess is your software, seeing as your phone's touch screen stopped working right after you conducted a hard reset. Perhaps you can get your touch screen working again by flashing your original firmware through KDZ.
If you've got anymore problems and/or questions, feel free to ask!
Click to expand...
Click to collapse
But I need debug mode and i cant check it!
kulka5010 said:
But I need debug mode and i cant check it!
Click to expand...
Click to collapse
That's gonna be a really big problem, I think. Can you boot into CWM and do a full factory reset along with wiping your cache and dalvik cache?
TahaX said:
That's gonna be a really big problem, I think. Can you boot into CWM and do a full factory reset along with wiping your cache and dalvik cache?
Click to expand...
Click to collapse
Still don't work ehh
kulka5010 said:
Still don't work ehh
Click to expand...
Click to collapse
Try another hard reset.
TahaX said:
Try another hard reset.
Click to expand...
Click to collapse
But what hard reset? :S
kulka5010 said:
But what hard reset? :S
Click to expand...
Click to collapse
You said you conducted a hard reset on your phone which is what initially possibly caused your touch screen to stop working. Try to perform the exact same steps and conduct a hard reset again.

[Q] S4 I9505 problems

Hi,
Did a OTA upgrade to 4.4.2, and now ive got aloth of problems....
Is there a way to downgrade to 4.3, that firmware worked flawless for me.
Mgacool
mgacool said:
Hi,
Did a OTA upgrade to 4.4.2, and now ive got aloth of problems....
Is there a way to downgrade to 4.3, that firmware worked flawless for me.
Mgacool
Click to expand...
Click to collapse
Once you've upgraded to 4.4.2 there's no returning to 4.3 bud - sorry
Why what problems you encountering ?
11calcal said:
Once you've upgraded to 4.4.2 there's no returning to 4.3 bud - sorry
Why what problems you encountering ?
Click to expand...
Click to collapse
Dam :\
Phone freez up for no good reason.
It gets extreme hot when charging
programs will not start.
Takes long time to connect to wireless
cant send SMS
so this update is crap om this phone, it was my wifes phone and now she is pissed hehe
What i have tried to do, reset. uploded new version of the firmware from samfw, clear chashe, factory reset. nothing works...
I have a S4 also, and now im afraid to update my phone. I dont want to **** up mine also
Mga
mgacool said:
Dam :\
Phone freez up for no good reason.
It gets extreme hot when charging
programs will not start.
Takes long time to connect to wireless
cant send SMS
so this update is crap om this phone, it was my wifes phone and now she is pissed hehe
What i have tried to do, reset. uploded new version of the firmware from samfw, clear chashe, factory reset. nothing works...
I have a S4 also, and now im afraid to update my phone. I dont want to **** up mine also
Mga
Click to expand...
Click to collapse
that's strange... try flashing a firmware with another csc.. wipe everything and reflash it
ongbac said:
that's strange... try flashing a firmware with another csc.. wipe everything and reflash it
Click to expand...
Click to collapse
Done that to. Tried:
I9505XXUFNB8_I9505TENFNB1_I9505XXUFNB8_HOME.tar.md5
I9505XXUEML6_I9505TENEML1_I9505XXUEML6_HOME.tar.md5
Same problem with both of them :/
mgacool said:
Done that to. Tried:
I9505XXUFNB8_I9505TENFNB1_I9505XXUFNB8_HOME.tar.md5
I9505XXUEML6_I9505TENEML1_I9505XXUEML6_HOME.tar.md5
Same problem with both of them :/
Click to expand...
Click to collapse
Try this mate , boot into recovery do a factory reset/Wipe cache and then reboot and Quickly press and hold power+Voldown in order to boot into downloadmode , Flash the stock rom and once its done... the phone should reboot automatically , and then Hold and press Power+VolumeUP that should boot your phone into recovery mode... Now do a factory reset/wipe cache and reboot your phone.. .Before the initial setup, Just dont do anything to your phone for atleast 4 to 5 minutes, Let it settle and then proceed with the initial setup.
mgacool said:
Done that to. Tried:
I9505XXUFNB8_I9505TENFNB1_I9505XXUFNB8_HOME.tar.md5
I9505XXUEML6_I9505TENEML1_I9505XXUEML6_HOME.tar.md5
Same problem with both of them :/
Click to expand...
Click to collapse
Do a factory reset :highfive:
Joku1981 said:
Do a factory reset :highfive:
Click to expand...
Click to collapse
Done that to. Same problems after factory reset
Take it to Samsung service centre.
mgacool said:
Done that to. Tried:
I9505XXUFNB8_I9505TENFNB1_I9505XXUFNB8_HOME.tar.md5
I9505XXUEML6_I9505TENEML1_I9505XXUEML6_HOME.tar.md5
Same problem with both of them :/
Click to expand...
Click to collapse
hi hon
i used
BL_I9505XXUFNAD_481100_REV06_user_low_ship_MULTI_CERT.tar.md5
i did download
I9505XXUFNB9_I9505NEEFNB2_I9505XXUFNB9_HOME.tar.md5
but used the BL_I9505XXUFNAD_481100_REV06_user_low_ship_MULTI_CERT.tar.md5 instead and i had no probs with it
i was facing the same problems but when i did Wipe partition data and factory reset/Wipe cache every thing was good.
now it's fast and good

[Q] Broken Digitalizer, Need to reset Rom Flashes

Woke up this morning and my phone wasn't responding to my touches and half the screen was completely stuffed. As I continued to restart and fix it now it just flashes white and black. Of course I would claim this under warranty but I have Cyanogen Mod on there so I need to go back to stop rom and need to reset my flash counter? Is there any way I can do that without actually going on the phone? Thanks
Sifkis said:
Woke up this morning and my phone wasn't responding to my touches and half the screen was completely stuffed. As I continued to restart and fix it now it just flashes white and black. Of course I would claim this under warranty but I have Cyanogen Mod on there so I need to go back to stop rom and need to reset my flash counter? Is there any way I can do that without actually going on the phone? Thanks
Click to expand...
Click to collapse
able to return to the flash counter to zero, but there is no way to reset the Knox counter
osmanovea said:
able to return to the flash counter to zero, but there is no way to reset the Knox counter
Click to expand...
Click to collapse
Would they check that if its a problem with a digitizer?
Sifkis said:
Would they check that if its a problem with a digitizer?
Click to expand...
Click to collapse
In each service is different,in each country is different
I changed my motherboard without problems, but they could not see the counters on my phone
osmanovea said:
In each service is different,in each country is different
I changed my motherboard without problems, but they could not see the counters on my phone
Click to expand...
Click to collapse
Is there a way to remotely wipe the cache so I can revert to stock rom?
Sifkis said:
Is there a way to remotely wipe the cache so I can revert to stock rom?
Click to expand...
Click to collapse
who what to do remote
who cache
I do not understand exactly your question
Hi,
You can try using THIS

Categories

Resources