Hi, I bought my Galaxy S4 9505 about a month ago, everything was great, I later decided to flash a custom ROM.
Something went wrong and i soft bricked my device, I was able to flash the stock ROM later and fix it.
however, I recently found out the after flashing the stock ROM, samsung KIES no longer recognizes my device.
I have installed the device's drivers, and KIES have identified it before I flashed it.
In addition, whenever I try to use samsung HUB, the app crashes immideatly giving an error message: "Mandatory Parameter Not Found (1101)"
Searching for the error, only one result came up where someone flashed his ROM using mobile odin, and it got fixed by reflashing with odin for windows.
Unfortunatly, this is not the case, I originally flashed it with windows odin, and even tried to flash it again, but still the same result.
If anyone can help me that would be great.
Thank you
itaymm said:
Hi, I bought my Galaxy S4 9505 about a month ago, everything was great, I later decided to flash a custom ROM.
Something went wrong and i soft bricked my device, I was able to flash the stock ROM later and fix it.
however, I recently found out the after flashing the stock ROM, samsung KIES no longer recognizes my device.
I have installed the device's drivers, and KIES have identified it before I flashed it.
In addition, whenever I try to use samsung HUB, the app crashes immideatly giving an error message: "Mandatory Parameter Not Found (1101)"
Searching for the error, only one result came up where someone flashed his ROM using mobile odin, and it got fixed by reflashing with odin for windows.
Unfortunatly, this is not the case, I originally flashed it with windows odin, and even tried to flash it again, but still the same result.
If anyone can help me that would be great.
Thank you
Click to expand...
Click to collapse
Did you do a data factory reset after flashing the stock rom in settings/accounts/backup and restore/reset.
eclickn
gee2012 said:
Did you do a data factory reset after flashing the stock rom in settings/accounts/backaup and restore/reset.
Click to expand...
Click to collapse
Yes
Hasn't helped
any more ideas?
itaymm said:
Yes
Hasn't helped
any more ideas?
Click to expand...
Click to collapse
You may have the wrong CSC file installed? Look if you have the correct one in dialpad *#1234#.
gee2012 said:
You may have the wrong CSC file installed? Look if you have the correct one in dialpad *#1234#.
Click to expand...
Click to collapse
I'm preety sure it's the right one.
I wrote it down before i flashed and it's the same one now:
I9505XXUAMDI
itaymm said:
I'm preety sure it's the right one.
I wrote it down before i flashed and it's the same one now:
I9505XXUAMDI
Click to expand...
Click to collapse
In what country do you live and which rom did you install? Strange, i would advice to reflash the rom and perform a data factory reset afterwards. Have no further ideas atm. Good luck
gee2012 said:
In what country do you live and which rom did you install? Strange, i would advice to reflash the rom and perform a data factory reset afterwards. Have no further ideas atm. Good luck
Click to expand...
Click to collapse
I live in Israel and bought the phone in israel.
I looked in samfirmware (dot) com
and it seems like there isn't really an Israel firmware, it also says the one I have is of Ireland's
I can guarentee that I9505XXUAMDI was the firmware installed before and after the flashing
itaymm said:
I live in Israel and bought the phone in israel.
I looked in samfirmware (dot) com
and it seems like there isn't really an Israel firmware, it also says the one I have is of Ireland's
I can guarentee that I9505XXUAMDI was the firmware installed before and after the flashing
Click to expand...
Click to collapse
Aah i see, you probably don`t have the correct software from the country/region where the phone originated from. You have to find the country where the phone was initialy sold. Look here and typein your imei number http://sndeep.info/en.
gee2012 said:
Aah i see, you probably don`t have the correct software from the country/region where the phone originated from. You have to find the country where the phone was initialy sold.
Click to expand...
Click to collapse
Are you sure this is the problem?
How can i find out the original software?
itaymm said:
Are you sure this is the problem?
How can i find out the original software?
Click to expand...
Click to collapse
Contact the reseller where you bought it.
gee2012 said:
Contact the reseller where you bought it.
Click to expand...
Click to collapse
Contacting the reseller about it will probably lead to voiding my warranty if I explain why I need to know, or refusing to answer if I don't explain why.
I can try to check out the firmware of some other S4 I9505 of people I know in Israel, hoping it will lead to something.
I still find it very hard to believe that even if the reseller told me where the phone was originally sold, it would turn out to be something different than Ireland.
I can guarentee that I9505XXUAMDI was the version I had before flashing, and I don't see how it could be unless it originated there.
OK, luckily, I still had a CWM recovery from before flashing the new firmware, i restored the backup, and now I know my CSC, my KIES work and samsung HUB as well.
However I now have CWM, and I wish to remove it, from what I know, only by flashing the stock firmware I will be able to remove CWM.
If I flash the firmware I thought was the correct one, I will return to the point where KIES isn't working for me again.
with this info:
PDA: I9505XXUAMDI
CSC: I9505TSIAMD8
which firmware should I flash?
Related
Hi All,
i,m Kriszty ( netherlands ) , my problem is that after a firmware update , my note 3 keeps restarting around 10 time,s a day, can i restore my old firmware, or install a new rom for resolving this problem ?, i bought it second hand, so i can,t return it to the shop
what to do ?
Baseband= N9005XXUBMJ2
Buildnr=JSS15J.N9005XXUBMJ3
kriszty said:
Hi All,
i,m Kriszty ( netherlands ) , my problem is that after a firmware update , my note 3 keeps restarting around 10 time,s a day, can i restore my old firmware, or install a new rom for resolving this problem ?, i bought it second hand, so i can,t return it to the shop
what to do ?
Baseband= N9005XXUBMJ2
Buildnr=JSS15J.N9005XXUBMJ3
Click to expand...
Click to collapse
yeah go sammobile should be able to find it there and your going to need odin to flash it
Hi,
thanks for your answer, but what do you mean with go sammobile ?
kriszty said:
Hi,
thanks for your answer, but what do you mean with go sammobile ?
Click to expand...
Click to collapse
http://www.sammobile.com/ all firmwares is on the website
ok, but i already have the newest N9005XXUBMJ3 firmware, but this gives me now a lot of problems, it tried yesterday the N9005XXUBMJ1 firmware for downgrading with ODIN3 , but that gives me only errors. so it looks i,m stock with this !
I would go into the android system recovery by holding volume up+home button+power button at the same time.
From there go to "wipe data/factory reset" and select yes.
After that select "reboot system now."
Once it's in go to settings/general/backup and reset. Choose to factory data reset.
That's assuming you are using a factory firmware and have backed up your important stuff. If that fails it could be a hardware problem which in that case, contact your local Samsung.
i already tried, but still the same.
the wierd thing is, that before the firmware update i had no trouble at all, so it has to be the new firmware !
i,m now downloading the MJ1 firmware, i will try to downgrade again ( hope it works )
if you are on N9005XXUBMJ3 you cannot backflash to N9005XXUBMJ1 because N9005XXUBMJ3 has a new bootloader with it and is not compatible with N9005XXUBMJ1
SquirtingCherry said:
if you are on N9005XXUBMJ3 you cannot backflash to N9005XXUBMJ1 because N9005XXUBMJ3 has a new bootloader with it and is not compatible with N9005XXUBMJ1
Click to expand...
Click to collapse
clear, thanks for the answer, so the solution will be waiting for a new firmware update, or will a custom rom solve my problem
kriszty said:
clear, thanks for the answer, so the solution will be waiting for a new firmware update, or will a custom rom solve my problem
Click to expand...
Click to collapse
I don't know for sure, but im on MJ3 also and have no problems at all, i have rooted with de_la_vega and installed Wanam framework and used TiBackup to remove a sh*tload of crapware samsung provided and still running strong. so maybe there went something wrong with your flash that causes the reboots, or maybe a faulty app.
Can't you just wipe back to factory settings in stock recovery? :L
nicholaschum said:
Can't you just wipe back to factory settings in stock recovery? :L
Click to expand...
Click to collapse
i can wipe back, but the firmware will be the same new one ?
kriszty said:
i can wipe back, but the firmware will be the same new one ?
Click to expand...
Click to collapse
Yes, but no one here seems to have the same problem, it is probably some problem app you have, or some settings that the system did not like.
You probably could have gotten a malware causing memory overloads, forcing a reboot, you never know. Wiping to factory is Step 1 at any time your phone is at a time like this.
nicholaschum said:
Yes, but no one here seems to have the same problem, it is probably some problem app you have, or some settings that the system did not like.
You probably could have gotten a malware causing memory overloads, forcing a reboot, you never know. Wiping to factory is Step 1 at any time your phone is at a time like this.
Click to expand...
Click to collapse
true,
just did, i will let you know what will happen the next hours.:good:
Noob question ahead!
I have International Galaxy S4 i9505 and I’m currently on rooted stock rom “i9505vjuemj6″ (zto) brazil android 4.3. I can not update OTA because of “modified device issue” and also can not update via Kies it says “GT-i9505 does not support initialization”.
Can I download “I9505VJUEMKE_I9505DGTEMKE_DGT” venezuela android 4.3 and flash it using odin to fix everything above?
- If not, which latest stock ROM do you recommend to install?
- Any description for this? “GT-i9505 does not support initialization”.
For install updates for android 4.3 u only need Kies 3, no Kies. I recommend u install the updates only with Kies 3 or via OTA. Flashing other firmwares that dont marry with ur region code is create more problems :highfive:
Joku1981 said:
For install updates for android 4.3 u only need Kies 3. I recommend u install the updates only with Kies 3 or via OTA. Flashing other firmwares no for ur region code is create more problems :highfive:
Click to expand...
Click to collapse
Thank you sir, but I have the Kies 3 installed already. I also uninstalled and then re-installed the kies 3. also using OEM usb cable. and the error message persist!
any idea to fix the error?
or even can you point me the best STOCK ROM for my situation?
martikp said:
Thank you sir, but I have the Kies 3 installed already. I also uninstalled and then re-installed the kies 3. also using OEM usb cable. and the error message persist!
any idea to fix the error?
or even can you point me the best STOCK ROM for my situation?
Click to expand...
Click to collapse
Conect it to Kies 3 and make me a screenshot pls :good:
Joku1981 said:
Conect it to Kies 3 and make me a screenshot pls :good:
Click to expand...
Click to collapse
Holy s**t, kies suddenly recognize my phone and says there is an update. :laugh:
i43.tinypic.com/t65853.jpg
same problem
Mate i am having the same problem and tried everything that's been said here. I am however in New Zealand and put a Nordic 4.4.2 on via Odin, but that shouldn't matter because as soon as i put the serial no. in that should fix it and initialise
Joku1981 said:
Conect it to Kies 3 and make me a screenshot pls :good:
Click to expand...
Click to collapse
MadR4sta said:
Mate i am having the same problem and tried everything that's been said here. I am however in New Zealand and put a Nordic 4.4.2 on via Odin, but that shouldn't matter because as soon as i put the serial no. in that should fix it and initialise
Click to expand...
Click to collapse
Dial *#1234# in ur phone and make a screenshot pls :highfive:
ok
Will do and get back to you as soon as i get another firware on, have also contacted Samsung and the'ry look into it too. but cheers if you can help. i'm just mucking around with other options as well at moment. i understand some forums say you cannot roll back the firmware from 4.4.2 to 4.2. I am having the screen rotation problem with the new 4.4.2 so i'm trying to find a way to roll back the FW and one way might be to install a custom rom with old bootloader that is also knox free via CWM install zip function to replace the new 4.4.2 bootloader with an old one. This may then allow me to roll back the firmware to an older version and kill my screen rotation problems.
Joku1981 said:
Dial *#1234# in ur phone and make a screenshot pls :highfive:
Click to expand...
Click to collapse
Pretty sure once you root your phone you can no longer use OTA or Kies, as you now have custom status.
Having said that I've not used kies once since I bought my S4 on April 27th and I change firmware like crazy.
Just use Odin. 9 times out of 10 any problem you have can be fixed by reflash and factory reset.
Sent from my GT-I9505 using XDA Premium HD app
you can use on any modified phone
If Kies lets you initialise the firmware with model and serial no. to the base version for your region for that phone then it will overwrite anything. However in the I9505 case it will not even let you initialise the firmware. Have called Samsung and they confirm they know this is the case but it is not something they will do anything about.
Obagleyfreer said:
Pretty sure once you root your phone you can no longer use OTA or Kies, as you now have custom status.
Having said that I've not used kies once since I bought my S4 on April 27th and I change firmware like crazy.
Just use Odin. 9 times out of 10 any problem you have can be fixed by reflash and factory reset.
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
Sorry about the delay. thanks for trying to help
OK so is this what you were asking for?
Screen rotation a real prob, but all my sensors show pass via *#0*# sensor checks. Tried nordic i9505 I9505XXUFNB9_I9505NEEFNB2_I9505XXUFNB9_HOME.tar 4.4.2, then SIngapore I9505XXUFNBE_I9505OLBFNB3_I9505XXUFNBE_HOME.tar 4.4.2 all the fken same problem. Screen rotation all fine when I flash firmware, root, then flash CWM touch - everything good. Screen rotate works until the first reboot after all of this which might even be a day or 2 later. As soon as reboot phone, screen rotation dies and it is a huge pain in the arse. Sensors continue to say pass via *#0*#. Every few days i have to re-flash firmware, re-root, then re-CWM touch, no need to factory reset just those 3 steps.:crying::crying:and is why i'm trying to figure out whatever methods i can to roll back the firmware to an earlier version but no joy....
MadR4sta said:
Will do and get back to you as soon as i get another firware on, have also contacted Samsung and the'ry look into it too. but cheers if you can help. i'm just mucking around with other options as well at moment. i understand some forums say you cannot roll back the firmware from 4.4.2 to 4.2. I am having the screen rotation problem with the new 4.4.2 so i'm trying to find a way to roll back the FW and one way might be to install a custom rom with old bootloader that is also knox free via CWM install zip function to replace the new 4.4.2 bootloader with an old one. This may then allow me to roll back the firmware to an older version and kill my screen rotation problems.
Click to expand...
Click to collapse
Sorry about the delay getting back. thanks for trying to help
OK so is this what you were asking for?
I know this is part of another thread which I have posted as, but is the reason for all my problems.
Screen rotation a real prob, but all my sensors show pass via *#0*# sensor checks. Tried nordic i9505 I9505XXUFNB9_I9505NEEFNB2_I9505XXUFNB9_HOME.tar 4.4.2, then SIngapore I9505XXUFNBE_I9505OLBFNB3_I9505XXUFNBE_HOME.tar 4.4.2 all the fken same problem. Screen rotation all fine when I flash firmware, root, then flash CWM touch - everything good. Screen rotate works until the first reboot after all of this which might even be a day or 2 later. As soon as reboot phone, screen rotation dies and it is a huge pain in the arse. Sensors continue to say pass via *#0*#. Every few days i have to re-flash firmware, re-root, then re-CWM touch, no need to factory reset just those 3 steps.
:crying::crying::crying::crying::crying:
and is why i'm trying to figure out whatever methods i can to roll back the firmware to an earlier version but no joy....
Joku1981 said:
Dial *#1234# in ur phone and make a screenshot pls :highfive:
Click to expand...
Click to collapse
MY GALAXY S4 SGH-I337 will not work with kies or smartswitch ive tried atleast fourty times and i need help ive tried odin already and it always fails because of write protection and now my s4 is in a bootloop can someone help?
Here is the video with what's happening (sorry for the potato quality): /watch?v=3wnC-GIZHWs
Does anyone have an idea about this? I've tried reinstalling the firmware with Samsung Kies, no luck. Tried the same with Odin with a firmware from sammobile, still no luck. I don't have a warranty for it and I was wondering if you guys could help me out.
Bump
download Official firmware and Flash with Odin !
Xangelic said:
download Official firmware and Flash with Odin !
Click to expand...
Click to collapse
Did this, took a firmware from sammobile and flashed it with Odin and this thing still happens...
do exactly the same thing, but tick UPDATE BOOTLOADER, after (if) it boots, use SamMobile's app to determine if Modem and Bootloader are updating...
PlutoDelic said:
do exactly the same thing, but tick UPDATE BOOTLOADER, after (if) it boots, use SamMobile's app to determine if Modem and Bootloader are updating...
Click to expand...
Click to collapse
Did this and managed to take a bunch of screenshots before it went restarting again.
http://imgur.com/a/JUCvA
Im not sure, seems a lot like hardware issue.
Did your phone come branded, like Tmobile and Vodefons stuff?
PlutoDelic said:
Im not sure, seems a lot like hardware issue.
Did your phone come branded, like Tmobile and Vodefons stuff?
Click to expand...
Click to collapse
Yea, it came locked in Vodafone, I unlocked it at a nearby GSM service. I'll take it there to see what the heck it's happening since I can't solve it myself. Thank you all for the support.
Try this...
Find the PIT file for branded phones (branded = carrier roms such as vodfona, etc)
Get SamFirm and download a branded 5.0.1 BOL3 rom, it'll download it in 4 tar.md5 files rather then one. Make sure it's a vodafone rom, it may be a csc issue.
Good luck...
Hi guys
I have run into little problem that I'm hoping learned members here can help me with.
I have a Note 3 SM-9005 that was running Kitkat 4.4.2 and I got it updated to 5.0 from a mobile repair guy. Everything looked smooth until I got home and noticed that now the WiFi does not work anymore. It always stays greyed out and never turns on.
I have tried turning on download booster, smartswitch, nothing helps. I have wiped cache, wipe data / factory reset but that's of no help.
Can you please help me get my WiFi working again.
Many thanks.
Cheers
Boot into download to confirm that the model # is sm-n9005. Is the phone running the latest bootloader and modem?
gr8leo87 said:
Hi guys
I have run into little problem that I'm hoping learned members here can help me with.
I have a Note 3 SM-9005 that was running Kitkat 4.4.2 and I got it updated to 5.0 from a mobile repair guy. Everything looked smooth until I got home and noticed that now the WiFi does not work anymore. It always stays greyed out and never turns on.
I have tried turning on download booster, smartswitch, nothing helps. I have wiped cache, wipe data / factory reset but that's of no help.
Can you please help me get my WiFi working again.
Many thanks.
Cheers
Click to expand...
Click to collapse
If you know how to reflash a firmware via Odin it's the way on it.
Yumiko87 said:
If you know how to reflash a firmware via Odin it's the way on it.
Click to expand...
Click to collapse
Should a reinstall be enough? Can you guide me which file should I flash in case the phone was flashed with a wrong firmware previously?
Wondering if following screenshots are of any help figuring out what's up with the firmware update mishap?
Screenshot showing latest firmware available from Phone Info app.
Try look at this at Sam mobile:
N9005DXUGBOK3
It's the usual update firmware of lollipop.
Sent from my SM-N930F using Tapatalk
audit13 said:
Boot into download to confirm that the model # is sm-n9005. Is the phone running the latest bootloader and modem?
Click to expand...
Click to collapse
I can confirm the model is indeed SM9005 however I'm unsure about the other two things. Can you please point me to where I should be looking for that information?
Thanks
Yumiko87 said:
Try look at this at Sam mobile:
N9005DXUGBOK3
It's the usual update firmware of lollipop.
Sent from my SM-N930F using Tapatalk
Click to expand...
Click to collapse
That's the UK version isn't it? Should I just grab that file and use Odin to flash right?
Would it be compatible with my phone which has a UAE version installed currently?
Ok just checked. It looks to be the Phillipines/Singapore/Malaysia/Thailand version. With some of them branded. Not sure which one I should be picking up?
The stock ROM may be slightly different for each country but you can try the latest Singapore version.
http://www.sammobile.com/firmwares/database/SM-N9005/
Yumiko87 said:
Try look at this at Sam mobile:
N9005DXUGBOK3
It's the usual update firmware of lollipop.
Sent from my SM-N930F using Tapatalk
Click to expand...
Click to collapse
audit13 said:
The stock ROM may be slightly different for each country but you can try the latest Singapore version.
http://www.sammobile.com/firmwares/database/SM-N9005/
Click to expand...
Click to collapse
Thanks
Will it trip Knox? As I would be putting a SIN firmware on a XSI (UAE) handset?
Flashing a stock rom will not trip Knox.
Personally, unless there is warranty left on the phone, I wouldn't worry about tripping the Knox counter.
audit13 said:
Flashing a stock rom will not trip Knox.
Personally, unless there is warranty left on the phone, I wouldn't worry about tripping the Knox counter.
Click to expand...
Click to collapse
Thanks for your reply.
I have also just noticed that the WiFi hotspot (tethering) doesn't work either.
I downloaded the latest XSI (UAE) firmware and installed it using Odin. But the problem still persists.
Should I try downloading and installing a Singapore firmware?
Is there a possibility that this phone is actually a carrier branded phone and was later debranded and that's why it's having this problem?
Please help life is difficult without Wifi
Does Bluetooth work? It's possible that the phone has a defective wifi chip. I have two galaxy s4 phones that have dead wifi chips but everything else works.
You can try flashinga another country's firmware but not sure if that will help.
Do you have a backup of the efs folder?
audit13 said:
Does Bluetooth work? It's possible that the phone has a defective wifi chip. I have two galaxy s4 phones that have dead wifi chips but everything else works.
You can try flashinga another country's firmware but not sure if that will help.
Do you have a backup of the efs folder?
Click to expand...
Click to collapse
Yes the bluetooth works.
The phone's WiFi was working fine before being updated to Lollipop.
No I got it updated from a phone repair guy before I got my hands dirty and put the new firmware my self. So no efs folder backup, unfortunately.
Hmm without knowing what the repair person did to the phone or how the update was performed, it's possible something went wrong during the flash process. Does the phone show the correct imei and MAC address?
audit13 said:
Hmm without knowing what the repair person did to the phone or how the update was performed, it's possible something went wrong during the flash process. Does the phone show the correct imei and MAC address?
Click to expand...
Click to collapse
He did it in front of me and from memory I can tell that he took a firmware file and used a software (probably Odin) to flash it in download mode.
The phone does show the correct IMEI as written under the battery spot and in device info does show a WiFi mac addresd however I'm unsure how to verify if that may be the correct one.
I have browsed Google and found few other people's posts on different forums who have this exact same problem. Someone suggested that I should reflash the firmware with bootloader checked using Odin.
Do you think it may be of help?
I have just discovered that the serial number on the back of the phone under battery is different from what is reported by the device.
Does this give any hint to what may be the issue?
I have a gaalxy s3 neo (gt-i9301i) with a stock rom and rooted, i've tried to flash stock firmware with odin like 3-4 times but the problem is still here.
the problem is that i can't get service, with wind italy.
firmware I9301IXUAPG1.
I hope is the modem corrupted, can someone help me?
thank's.
Evasi0n3r said:
I have a gaalxy s3 neo (gt-i9301i) with a stock rom and rooted, i've tried to flash stock firmware with odin like 3-4 times but the problem is still here.
the problem is that i can't get service, with wind italy.
firmware I9301IXUAPG1.
I hope is the modem corrupted, can someone help me?
thank's.
Click to expand...
Click to collapse
See for Italy I found this:
https://www.sammobile.com/firmwares/galaxy-s--neo/GT-I9301I/ITV/download/I9301IXCUAPH1/94320/
Product code:ITV
PDA:I9301IXCUAPH1
CSC:I9301IITVAOL1
This is for Sony Sensors
Here is another one for Italy:
https://updato.com/firmware-archive-select-model?record=4AE87DBE1EF311E6949E0CC47A44B7B2
Obviously it is for Samsung sensors because of NI/NJ.
Donyou have Sony or Samsung?
If you have a working stock with Modem. You can make a Backup only of the modem and flash it over working camera stock (I think that must work).
spirit_of_the_ocean said:
See for Italy I found this:
https://www.sammobile.com/firmwares/galaxy-s--neo/GT-I9301I/ITV/download/I9301IXCUAPH1/94320/
Product code:ITV
PDA:I9301IXCUAPH1
CSC:I9301IITVAOL1
This is for Sony Sensors
Here is another one for Italy:
https://updato.com/firmware-archive-select-model?record=4AE87DBE1EF311E6949E0CC47A44B7B2
Obviously it is for Samsung sensors because of NI/NJ.
Donyou have Sony or Samsung?
If you have a working stock with Modem. You can make a Backup only of the modem and flash it over working camera stock (I think that must work).
Click to expand...
Click to collapse
Thank's, how i can say what sensor i have? i've tried to restore a working modem backup from another motherboard with charger broken but the result is the same
Evasi0n3r said:
Thank's, how i can say what sensor i have? i've tried to restore a working modem backup from another motherboard with charger broken but the result is the same
Click to expand...
Click to collapse
First of all relax.
I would try the updato link. Flash the firmware.
1. Check if provider service works.
If it works then
2. Check if your camera works.
If yes modem and camera works it is a good stock for you.
Maybe you can try and post the results. Don't worry. There are lots of people who want to help.
spirit_of_the_ocean said:
First of all relax.
I would try the updato link. Flash the firmware.
1. Check if provider service works.
If it works then
2. Check if your camera works.
If yes modem and camera works it is a good stock for you.
Maybe you can try and post the results. Don't worry. There are lots of people who want to help.
Click to expand...
Click to collapse
I'm relaxed, sorry if i seems hurt hahaha.
If this could help i can post Samsung info screen.
I have to try both firmware?
Evasi0n3r said:
I'm relaxed, sorry if i seems hurt hahaha.
If this could help i cani post Samsung info screen.
I have to try both firmware?
Click to expand...
Click to collapse
Try this at first:
https://updato.com/firmware-archive-select-model?record=3C31E6DACA1511E69215FA163EE8F90B
It is I9301IXUAPG1
A good Italian guy on homies wrote:
Alessandro ?, [29.03.18 21:29]
Because if it has sony sensor same to me, it needs to flash old stock and update via ota
Alessandro ?, [29.03.18 21:31]
This is the old stock for sony sensor
Alessandro ?, [29.03.18 21:32]
https://updato.com/firmware-archive-select-model?record=4AE87DBE1EF311E6949E0CC47A44B7B2
Click to expand...
Click to collapse
Hey
Evasi0n3r said:
I have a gaalxy s3 neo (gt-i9301i) with a stock rom and rooted, i've tried to flash stock firmware with odin like 3-4 times but the problem is still here.
the problem is that i can't get service, with wind italy.
firmware I9301IXUAPG1.
I hope is the modem corrupted, can someone help me?
thank's.
Click to expand...
Click to collapse
HEY, i'm an Italian Boy
I have sony sensor and I think you have the same to me,
https://updato.com/firmware-archive-select-model?record=4AE87DBE1EF311E6949E0CC47A44B7B2 use this firmware and tell me, if you need help, text me on telegram @vespino_21
I have to wipe all or i can dirty flash those firmwares?
Thank's
Evasi0n3r said:
I have to wipe all or i can dirty flash those firmwares?
Thank's
Click to expand...
Click to collapse
I would make a clean flash.
News:
I've flashed all two firmwares, but no one show me benefits, i have another s3 neo motherboard with charger defect (all chargers make the phone lag and reboot sometimes) and all firmwares work well with reception.
I've followed these steps:
1) boot intwrp and wipe all
2) boot in download
3) flash (I9301IXXUANI1_I9301IITVANJ1_I9301IXXUANI2_HOME.tar.md5)
4) reboot
5) same very bad signal
other firmware:
1) boot in stock recovery and wipe
2) boot in download mode
3) flash (I9301IXCUAPH1_I9301IITVAOL1_I9301IXXUAPG1_HOME.tar.md5)
4) reboot
5) same very bad singal
I'm starting to think that this could be an hardware problem
Edit:
checked if my imei was bad for some reason, but is clean.