HELLO EVERYONE AT XDA, TODAY I WILL BE SHOWING YOU HOW TO RESET FLASH COUNTER AND DEVICE STATUS ON THE SAMSUNG GALAXY NOTE 10.1
I DON'T TAKE ANY CREDIT FOR THE APPS I WILL BE USING BUT YOU CAN PRESS THE THANKS BUTTON FOR ME FOR MAKING THIS GUIDE
REQUIREMENTS:
SAMSUNG GALAXY NOTE 10.1 ROOTED [ OF COURSE ]
TRIANGLE AWAY APP [ DOWNLOAD BELOW ]
PROCEED AS FOLLOWS:
DOWNLOAD TRIANGLE AWAY APP AND INSTALL
GIVE ROOT PERMISSIONS AND DOWNLOAD THE REQUIRED FILES ACCORDING TO YOUR MODEL
THEN AFTER DOWNLOADING IS COMPLETE, TAP RESET FLASH COUNTER AND STATUS [ YOU WILL BE TAKEN TO A DIFFERENT BOOT MENU ]
HERE YOU SEE YOUR CURRENT STATUS, PRESS VOLUME UP BUTTON TO RESET FLASH COUNTER AND STATUS AND IT WILL REBOOT
IMMEDIATELY AFTER REBOOT, POWER OFF THE DEVICE. NOW WE GO INTO DOWNLOAD MODE
PRESS POWER BUTTON AND VOLUME DOWN BUTTON TOGETHER, YOU WILL SEE A MENU, PRESS VOLUME UP BUTTON AND CHECK WHAT THE STATUS IS [ IN MY CASE IT IS ]
ODIN MODE
PRODUCT NAME:GT-N8000
CUSTOM BINARY DOWNLOAD:No
CURRENT BINARY:Samsung Official
SYSTEM STATUS: official
YOUR STATUS MUST BE EXACTLY THE SAME EXCEPT FOR THE PRODUCT NAME
IF IT THE SAME AS ABOVE,NOW FLASH STOCK RECOVERY VIA ODIN BUT UNCHECK THE AUTO REBOOT.THEN WHEN FLASINGH COMPLETE, PRESS AND HOLD VOLUME UP AND POWER BUTTON TO REBOOT INTO RECOVERY MODE.ONCE IN RECOVERY REBOOT FROM THERE.
NOTE:
YOU MUST HAVE STOCK ROM, STOCK RECOVERY AND STOCK KERNEL
TESTED ON GT-N8000
TROUBLESHOOTING:
THE DEVICE STATUS DOES NOT CHANGE TO OFFICIAL : FLASH STOCK RECOVERY AND TRY AGAIN
IF STILL THE DEVICE STATUS IS CUSTOM OR MODIFIED, CAREFULLY REPEAT THE STEPS ABOVE ( 1 TO 6 ) AND CHECK IF IT STILL CUSTOM, FLASH STOCK RECOVERY ONLY AND CHECK STATUS : IF IT IS OFFICIAL IN DOWNLOAD MODE AND SETTINGS THEN NO NEED TO DO A FACTORY RESET
IMPORTANT POINTS:
THE DEVICE CAN CHANGE BACK TO CUSTOM IF YOU CHECK IN SETTING, JUST DO A RESTART OR POWER OFF AND START, IT WILL BE OFFICIAL
SOME APPS THAT ASK FOR ROOT PERMISSION ON START, CAN ALSO TRIGGER THE STATUS TO CHANGE : YOU CAN DISABLE IT OR UNINSTALL IT
I HAVE TESTED THE ABOVE METHOD BY MYSELF AND IT WORKS ALSO I HAVE ATTACHED SCREENSHOTS TO PROVE THAT I HAVE ROOT AND ALL THE STATUSES OFFICIAL
FIRST TESTED ON ICE CREAM SANDWICH WITH ROOT WORKED, THEN UPDATED VIA OTA TO JELLY BEAN AND IT WORKS
WITH THIS METHOD YOU WILL NOT LOSE ROOT ACCESS AND CAN BE TESTED ON ANY SAMSUNG PHONES FOR SIMILAR CASE
Jaspreet.master7 said:
THIS GUIDE IS DESIGNED BY A NOOB(THATS ME) BUT ITS FOR EVERYONE ALSO ITS MY FIRST POST
HELLO EVERYONE AT XDA. I have been searching the web for solutions on how to reset flash counter to zero and the device status to normal OR official. BUT FOUND NOTHING STRAIGHT FORWARD
NOTE: I DON'T TAKE CREDIT FOR THE APPS THAT WILL BE USED, I WILL BE JUST MAKE A GUIDE FOR THE SAMSUNG GALAXY NOTE 10.1
WHAT YOU NEED IS:
TRIANGLE AWAY APP ( v2.26 ) by chainfire ----- I KNOW THIS VERSION IS OLD BUT IT WORKS , TRUST ME I ALSO TRIED WITH THE LATEST TRIANGLE AWAY VERSION BUT DIDN'T WORK KEPT RESETTING THE FLASH COUNTER TO 1-----
I BIT OF KNOWLEDGE AND PATIENCE
STEPS
1..FIRST INSTALL TRIANGLE AWAY APP { 2.26 }
2..OPEN TRIANGLE AWAY APP AND DOWNLOAD ACCORDING TO YOUR MODEL
3..TAP RESET FLASH COUNTER ---- YOU WILL BE TAKEN TO A DIFFERENT BOOT MENU----
4..NOW PRESS THE VOLUME UP BUTTON TO RESET FLASH COUNTER AND STATUS AND IT WILL REBOOT
5..AFTER REBOOT GO TO DOWNLOAD MODE BY PRESSING THE POWER BUTTON AND VOLUME DOWN BUTTON----IT SHOULD SAY---
ODIN MODE
PRODUCT NAME:GT-N8000
CUSTOM BININARY DOWNLOAD:NO
CURRENT BINARY:SAMSUNG OFFICIAL
SYSTEM STATUS: official
if it is custom try again until it shows official
IF YOU MANGE TO GET SYSTEM STATUS OFFICIAL THEN DO A FACTORY RESET FROM SETTINGS
7..NOW YOUR DONE , COMPLETE THE SETUP AND CHECK THE DEVICE STATUS ( IT WILL BE OFFICIAL, IF YOU MANGE TO GET STEP 5 CORRECT )
I HAVE TESTED AND IT WORKS , I AM ON JELLY BEAN 4.1.2 STOCK AND HAVE STOCK KERNEL AND STOCK RECOVERY
I HAVE ALSO TRIED IT BEFORE ON ICE CREAM SANDWICH AND IT WORKS
PLEASE PRESS THE THANKS BUTTON
Click to expand...
Click to collapse
I had the same experience and ended up flashing back to Factory.
So now I'm experiencing my Note 10.1 they way Samsung wanted me to ( LOL )
kkretch said:
I had the same experience and ended up flashing back to Factory.
So now I'm experiencing my Note 10.1 they way Samsung wanted me to ( LOL )
Click to expand...
Click to collapse
this will now help others who dont like seeing custom or modified status in setting and keep receiving OTA updates from samsung
triangle away
where did you get v2 26
Found it. Thanks
Jaspreet.master7 said:
THIS GUIDE IS DESIGNED BY A NOOB(THATS ME) BUT ITS FOR EVERYONE ALSO ITS MY FIRST POST
HELLO EVERYONE AT XDA. I have been searching the web for solutions on how to reset flash counter to zero and the device status to normal OR official. BUT FOUND NOTHING STRAIGHT FORWARD
THIS METHOD WILL ALLOW YOU TO RECEIVE OTA UPDATES AND YOU DON'T NEED TO FLASH FIRMWARES ON YOUR NOTE 10.1 TO GET THE STATUS NORMAL OR OFFICIAL
NOTE: I DON'T TAKE CREDIT FOR THE APPS THAT WILL BE USED, I WILL BE JUST MAKE A GUIDE FOR THE SAMSUNG GALAXY NOTE 10.1 [JELLY BEAN/ ICE CREAM SANDWICH]
WHAT TOU NEED IS:
TRIANGLE AWAY APP ( v2.26 ) by chainfire ----- I KNOW THIS VERSION IS OLD BUT IT WORKS , TRUST ME I ALSO TRIED WITH THE LATEST TRIANGLE AWAY VERSION BUT DIDN'T WORK KEPT RESETTING THE FLASH COUNTER TO 1-----
I BIT OF KNOWLEDGE AND PATIENCE
STEPS
1..FIRST INSTALL TRIANGLE AWAY APP { 2.26 }
2..OPEN TRIANGLE AWAY APP AND DOWNLOAD ACCORDING TO YOUR MODEL
3..TAP RESET FLASH COUNTER ---- YOU WILL BE TAKEN TO A DIFFERENT BOOT MENU----
4..NOW PRESS THE VOLUME UP BUTTON TO RESET FLASH COUNTER AND STATUS AND IT WILL REBOOT
5..AFTER REBOOT GO TO DOWNLOAD MODE BY PRESSING THE POWER BUTTON AND VOLUME DOWN BUTTON----IT SHOULD SAY---
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ODIN MODE
PRODUCT NAME:GT-N8000
CUSTOM BININARY DOWNLOAD:NO
CURRENT BINARY:SAMSUNG OFFICIAL
SYSTEM STATUS: official[ if it is custom instead of official try again until it shows official ]
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
6..IF YOU MANGE TO GET SYSTEM STATUS OFFICIAL THEN DO A FACTORY RESET FROM SETTINGS
7..NOW YOUR DONE , COMPLETE THE SETUP AND CHECK THE DEVICE STATUS ( IT WILL BE OFFICIAL, IF YOU MANGE TO GET STEP 5 CORRECT )
I HAVE TESTED AND IT WORKS , I AM ON JELLY BEAN 4.1.2 STOCK AND HAVE STOCK KERNEL AND STOCK RECOVERY
I HAVE ALSO TRIED IT BEFORE ON ICE CREAM SANDWICH AND IT WORKS
PLEASE PRESS THE THANKS BUTTON
Click to expand...
Click to collapse
Why is step 6 necessary if it is already back to saying official? (I'm new to dealing with samsung's flash counter so I apologize if the answer is obvious)
lazer155 said:
Why is step 6 necessary if it is already back to saying official? (I'm new to dealing with samsung's flash counter so I apologize if the answer is obvious)
Click to expand...
Click to collapse
yes it is neccesary because in download mode it may show SYSTEM STATUS : OFFICIAL but it does not show in settings > about device > status> device status
it will be still modified or custom there so factory reset needs to be done
I did the same thing but stayed rooted with the "Official" Device Status in About settings using mobile ODIN Pro.
Triangle away 1st, I used the latest, 2.88 I believe.
From a rooted device with mobile ODIN Pro installed I factory reset the Note 1st in settings, then using mobile ODIN flashed a stock rom onto the device ticking clear cache/data and clear dalvik cache.
After reset and setup, I'm still rooted with Mobile ODIN Pro & Supersu installed and have 0 counter, Official rom status in download mode on both parts and my About status in settings says official... This took about as long as it takes to flash the stock rom....
2nd picture, 3rd app from the right is SuperSU Pro...
ultramag69 said:
I did the same thing but stayed rooted with the "Official" Device Status in About settings using mobile ODIN Pro.
Triangle away 1st, I used the latest, 2.88 I believe.
From a rooted device with mobile ODIN Pro installed I factory reset the Note 1st in settings, then using mobile ODIN flashed a stock rom onto the device ticking clear cache/data and clear dalvik cache.
After reset and setup, I'm still rooted with Mobile ODIN Pro & Supersu installed and have 0 counter, Official rom status in download mode on both parts and my About status in settings says official... This took about as long as it takes to flash the stock rom....
2nd picture, 3rd app from the right is SuperSU Pro...
Click to expand...
Click to collapse
but with my method u dont need to flash stock rom [ correct me if i am wrong ]
You still need to go back to a stock rom. Any custom R0Ms won't do as they use custom recoveries. Besides, I haven't seen many Custom ROM's that Can be flashed by ODIN.
And as soon as you root your tab you increase the flash counter.
ultramag69 said:
You still need to go back to a stock rom. Any custom R0Ms won't do as they use custom recoveries. Besides, I haven't seen many Custom ROM's that Can be flashed by ODIN.
And as soon as you root your tab you increase the flash counter.
Click to expand...
Click to collapse
Thats 100% correct .
TA + Stock Rom + Factory Reset is my preferred method to clear the three custom firmware indicators .
jje
As of now I am rooted, have a custom firmware and high on android recovery. I want to stay rooted but remove all 3 of the custom status warnings. If I just follow this guide, will I stay rooted? I know I will have to remove my custom rom but I don't mind so it isn't a problem. Based on what ultramag69's post it sounds like I will be able to remain rooted using the guide in the OP.
It's unrelated to what I want to do now (since I want to keep root) but how is this different from unrooting. The steps seem the same. I'm confused about how/if you keep root with this method and how you would go about unrooting in the event of needing to send the tablet in for repairs to samsung.
ultramag69 said:
You still need to go back to a stock rom. Any custom R0Ms won't do as they use custom recoveries. Besides, I haven't seen many Custom ROM's that Can be flashed by ODIN.
And as soon as you root your tab you increase the flash counter.
Click to expand...
Click to collapse
let me make it clear , THIS GUIDE IS FOR STOCK ROM, STOCK RECOVERY, AND STOCK KERNEL,,,,,,,,
AND I DONT UNDERSTAND WHY DO YOU EVEN WANT TO RESET THE FLASH COUNTER WHEN U ARE USING A CUSTOM ROM ????
lazer155 said:
as of now i am rooted, have a custom firmware and high on android recovery. I want to stay rooted but remove all 3 of the custom status warnings. If i just follow this guide, will i stay rooted? I know i will have to remove my custom rom but i don't mind so it isn't a problem. Based on what ultramag69's post it sounds like i will be able to remain rooted using the guide in the op.
It's unrelated to what i want to do now (since i want to keep root) but how is this different from unrooting. The steps seem the same. I'm confused about how/if you keep root with this method and how you would go about unrooting in the event of needing to send the tablet in for repairs to samsung.
Click to expand...
Click to collapse
with this guide u will still have root access
Jaspreet.master7 said:
let me make it clear , THIS GUIDE IS FOR STOCK ROM, STOCK RECOVERY, AND STOCK KERNEL,,,,,,,,
AND I DONT UNDERSTAND WHY DO YOU EVEN WANT TO RESET THE FLASH COUNTER WHEN U ARE USING A CUSTOM ROM ????
Click to expand...
Click to collapse
Because you can't use the Allshare cast hub if you have a custom status in the bootloader section and a raised count.
This has been raised before....
You may want to alter the name of the thread to say for stock roms as this may come up again.
With the method I put forward you will loose your custom rom but you will retain a stock rooted rom with all statuses as "Official" and "0" flash counter. Afterwards you may be able to flash a custom rom but I believe the system status will go back to "Custom" as custom roms install custom recoveries and play around with system files that get scanned after initial boot...
Likewise the thread says how to reset and does not say how to reset stock rom only .
jje
ultramag69 said:
Because you can't use the Allshare cast hub if you have a custom status in the bootloader section and a raised count.
This has been raised before....
You may want to alter the name of the thread to say for stock roms as this may come up again.
With the method I put forward you will loose your custom rom but you will retain a stock rooted rom with all statuses as "Official" and "0" flash counter. Afterwards you may be able to flash a custom rom but I believe the system status will go back to "Custom" as custom roms install custom recoveries and play around with system files that get scanned after initial boot...
Click to expand...
Click to collapse
are you saying the official status in the following:
1) settings
2)odin mode .. SYSTEM STATUS
3) odin mode .. CURRENT BIN
Jaspreet.master7 said:
are you saying the official status in the following:
1) settings
2)odin mode .. SYSTEM STATUS
3) odin mode .. CURRENT BIN
Click to expand...
Click to collapse
Yes. Those are the 3 areas that change.
My Download mode screen says -
Odin mode
Product Name: GT-N8000
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
My System>about device>Status>Device Status is Official.
I am rooted with Super SU pro installed and Mobile ODIN Pro installed. I have root access to my device. I can use titanium backup/carbon backup as I am rooted.
Clock sync works without needing rootless mode and I can access and alter my system directory.
ultramag69 said:
My Download mode screen says -
Odin mode
Product Name: GT-N8000
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
My System>about device>Status>Device Status is Official.
I am rooted with Super SU pro installed and Mobile ODIN Pro installed. I have root access to my device. I can use titanium backup/carbon backup as I am rooted.
Clock sync works without needing rootless mode and I can access and alter my system directory.
Click to expand...
Click to collapse
YES then my guide does the same in all 3 places
i can show u the screen shots if needed
RESERVED
Hello Guys,
Let's start with the story :
Old Bootloader, Stock Kernel , PhilZ CMW and Rom XXUDMBA with Chainfire Root.
Then i've installed through CMW the Know Free XXMI1, with Adam Kernel and Modem XXMI1 and still CMW Philz.
Suddenly my phone started to get crazy. Not able to receive calls, pohone freeze , screen blinking etc... Tried with factory and wipe but stucked on S4 logo (not even the samsung one)
Installed, through Odin, the MH8 pre-rooted, Modem MH8, Stock Kernel.
Now i've the new Bootloader, Knox Status stil 0x0, New Modem and New Rom. Everything is working but i've a question.
If i would like to have back the Philz Custom Recovery, flashing with odin, the Knox status will reach 0x1 ?
And why now my device says that my status is modified. I have stock kernel, recovery, rom (just knox free).
and if i would like to update the Rom with a stock one, with knox and all the other s***t, do i need to go necessary through Odin ? because OTA are compromised.
Last question is : Is the wifi-fix mandatory ? i don't know how to know if my wifi has problem. So far seems to work perfectly.
riccardoroma said:
Hello Guys,
Let's start with the story :
Old Bootloader, Stock Kernel , PhilZ CMW and Rom XXUDMBA with Chainfire Root.
Then i've installed through CMW the Know Free XXMI1, with Adam Kernel and Modem XXMI1 and still CMW Philz.
Suddenly my phone started to get crazy. Not able to receive calls, pohone freeze , screen blinking etc... Tried with factory and wipe but stucked on S4 logo (not even the samsung one)
Installed, through Odin, the MH8 pre-rooted, Modem MH8, Stock Kernel.
Now i've the new Bootloader, Knox Status stil 0x0, New Modem and New Rom. Everything is working but i've a question.
If i would like to have back the Philz Custom Recovery, flashing with odin, the Knox status will reach 0x1 ?
And why now my device says that my status is modified. I have stock kernel, recovery, rom (just knox free).
and if i would like to update the Rom with a stock one, with knox and all the other s***t, do i need to go necessary through Odin ? because OTA are compromised.
Last question is : Is the wifi-fix mandatory ? i don't know how to know if my wifi has problem. So far seems to work perfectly.
Click to expand...
Click to collapse
Modified because its pre-rooted...
Flashing anything through ODIN will change the void warranty from 0x0 to 0x1 unless its a stock rom (from MH8 up otherwise you will soft brick)....
You might be able to get rid of the modified status if you flash a totally stock rom but who wants to do that?
So the next question is :
If i would like to flash a new pre-rooted or custom rom i'll void my knox anyway. Because now i have stock recovery and this mean that i can flash only through Kies to a stock Rom right ?
Flashing a custom recovery with Odin (Knox 0x1)
Flashing a stock pre-rooted rom with Odin (Knox 0x1)
Flashing a stock rom newer then mine with kies or Odin (Knox 0x0)
am i right ? so i'm stucked on this ROM in other words, unless i'll just don't care about Knox.
Hi all, my N7100 keeps resetting to Custom Binary 1 and status custom even after I root and triangle away. The custom binary resetting happens when I factory reset after triangle away.
I am using the latest TGY stock ROM from Sammobile: PDA: N7100ZSUEML1 ; CSC: N7100OZSEML1 ; MODEM: N7100ZSEML1
I was on a custom kernel before this ROM. Is this issue because maybe I still have custom kernel? If so, where can I find a stock kernel that is compatible with my current Stock ROM?
Please help.
rinuvimal said:
Hi all, my N7100 keeps resetting to Custom Binary 1 and status custom even after I root and triangle away. The custom binary resetting happens when I factory reset after triangle away.
I am using the latest TGY stock ROM from Sammobile: PDA: N7100ZSUEML1 ; CSC: N7100OZSEML1 ; MODEM: N7100ZSEML1
I was on a custom kernel before this ROM. Is this issue because maybe I still have custom kernel? If so, where can I find a stock kernel that is compatible with my current Stock ROM?
Please help.
Click to expand...
Click to collapse
For it to stay at 0 then stock recovery must also be present
rinuvimal said:
Hi all, my N7100 keeps resetting to Custom Binary 1 and status custom even after I root and triangle away. The custom binary resetting happens when I factory reset after triangle away.
I am using the latest TGY stock ROM from Sammobile: PDA: N7100ZSUEML1 ; CSC: N7100OZSEML1 ; MODEM: N7100ZSEML1
I was on a custom kernel before this ROM. Is this issue because maybe I still have custom kernel? If so, where can I find a stock kernel that is compatible with my current Stock ROM?
Please help.
Click to expand...
Click to collapse
It will work if you're stock rom rooted. and stock recovery.
warlycastro said:
It will work if you're stock rom rooted. and stock recovery.
Click to expand...
Click to collapse
I installed 4.2.2 stock rom from http://www.androidrootz.com/p/galaxy-s4-stock-firmwares.html (I have the Tmobile USA version SGH-m919)
I assume that the stock rom also flashes stock recovery.
I then rooted by using the CF-auto method, and rebooted.
installed Triangle away, and reset the counter the program reported success, and a quick reboot into download mode confirmed.
Then I booted into stock recovery and wiped data and cache
Once I rebooted, I was unable to run an OTA update. I get a message saying the system has been modified. opening Triangle away, I see that I am at counter 0 and samsung official binary. and official system.
What do I need to do in order to get an OTA update?