after modding i returned to stock to back warranty. i flashed stock firmare with odin.. now the status is official also for binary counter. but the samsung apps doesnt works!!! how can i do?
No processing performed is the error
Related
Hello guys,
I rooted my stock s4 using Odin and CF-Autoroot. Everything went fine.
After this, i flashed the Official Status Mod and reseted the flash counter with Triangle Away 3.0.1.
My Flash counter is 0 and the Device Status was Official.
Then i installed busybox and with System Tuner Pro, removed from Startup some apps, specially Samsung ones.
Yesterday i was checking the Device Status and it is Custom now (
Tried to flash Official Status Mod again, but nothing..
Triangle Away shows counter 0, Binary official. I tried the System modified workaround, but nothing, it stays Custom.
Is there some app that cannot be desactivated to stay Official? Theres anything else i can try?
Thanks!
MoOnBoY said:
Hello guys,
I rooted my stock s4 using Odin and CF-Autoroot. Everything went fine.
After this, i flashed the Official Status Mod and reseted the flash counter with Triangle Away 3.0.1.
My Flash counter is 0 and the Device Status was Official.
Then i installed busybox and with System Tuner Pro, removed from Startup some apps, specially Samsung ones.
Yesterday i was checking the Device Status and it is Custom now (
Tried to flash Official Status Mod again, but nothing..
Triangle Away shows counter 0, Binary official. I tried the System modified workaround, but nothing, it stays Custom.
Is there some app that cannot be desactivated to stay Official? Theres anything else i can try?
Thanks!
Click to expand...
Click to collapse
Normal way u can now re flash stock firmware using odin and reset the device all will be official
2nd option flash pretty rooted firmware using odin reset the device for better performance / no error all will be official
.
Hello Guys,
Let's start with the story :
Old Bootloader, Stock Kernel , PhilZ CMW and Rom XXUDMBA with Chainfire Root.
Then i've installed through CMW the Know Free XXMI1, with Adam Kernel and Modem XXMI1 and still CMW Philz.
Suddenly my phone started to get crazy. Not able to receive calls, pohone freeze , screen blinking etc... Tried with factory and wipe but stucked on S4 logo (not even the samsung one)
Installed, through Odin, the MH8 pre-rooted, Modem MH8, Stock Kernel.
Now i've the new Bootloader, Knox Status stil 0x0, New Modem and New Rom. Everything is working but i've a question.
If i would like to have back the Philz Custom Recovery, flashing with odin, the Knox status will reach 0x1 ?
And why now my device says that my status is modified. I have stock kernel, recovery, rom (just knox free).
and if i would like to update the Rom with a stock one, with knox and all the other s***t, do i need to go necessary through Odin ? because OTA are compromised.
Last question is : Is the wifi-fix mandatory ? i don't know how to know if my wifi has problem. So far seems to work perfectly.
riccardoroma said:
Hello Guys,
Let's start with the story :
Old Bootloader, Stock Kernel , PhilZ CMW and Rom XXUDMBA with Chainfire Root.
Then i've installed through CMW the Know Free XXMI1, with Adam Kernel and Modem XXMI1 and still CMW Philz.
Suddenly my phone started to get crazy. Not able to receive calls, pohone freeze , screen blinking etc... Tried with factory and wipe but stucked on S4 logo (not even the samsung one)
Installed, through Odin, the MH8 pre-rooted, Modem MH8, Stock Kernel.
Now i've the new Bootloader, Knox Status stil 0x0, New Modem and New Rom. Everything is working but i've a question.
If i would like to have back the Philz Custom Recovery, flashing with odin, the Knox status will reach 0x1 ?
And why now my device says that my status is modified. I have stock kernel, recovery, rom (just knox free).
and if i would like to update the Rom with a stock one, with knox and all the other s***t, do i need to go necessary through Odin ? because OTA are compromised.
Last question is : Is the wifi-fix mandatory ? i don't know how to know if my wifi has problem. So far seems to work perfectly.
Click to expand...
Click to collapse
Modified because its pre-rooted...
Flashing anything through ODIN will change the void warranty from 0x0 to 0x1 unless its a stock rom (from MH8 up otherwise you will soft brick)....
You might be able to get rid of the modified status if you flash a totally stock rom but who wants to do that?
So the next question is :
If i would like to flash a new pre-rooted or custom rom i'll void my knox anyway. Because now i have stock recovery and this mean that i can flash only through Kies to a stock Rom right ?
Flashing a custom recovery with Odin (Knox 0x1)
Flashing a stock pre-rooted rom with Odin (Knox 0x1)
Flashing a stock rom newer then mine with kies or Odin (Knox 0x0)
am i right ? so i'm stucked on this ROM in other words, unless i'll just don't care about Knox.
So I sold my buddy the note 3. It was rooted so I flashed a 4.42 stock firmware back on, knox is already tripped. Apparently there's an update for the device and the msg when he tries to update is software has been modified. I download root checker and it is indeed no rooted. Any ideas?
Because knox has been tripped to 0x1, that phone can never updated via ota or the samsung app. You must now download a updated stock rom, or some other fancy rom. Untill someone can fix knox back to 0x0... This is the only way to upgrade.
Experienced this running stock rom and all (recovery, boot etc). But knox is already 0x1. When i was running XTC (Philippine stock kk rom) i get the message about modified software when checking with ota. But when I use XSG(is the csc correct for Singapore?) And try to do an ota it downloaded the update without a problem.
Heres what you can do use triangle away to reset thr binary recovery to official then flash stock rom and see if you can do an ota without any problems.
Actually it was not known to me that my g901f was rooted. I just flashed it with NEE stock firmware lolipop, which eventually bricked the set.
I tried Smart Switch manual insertion of Model and S/N, but it says no database verification. So i tried again odin 3.09 to flash with various firmwares which results in zero.
Set is in white screen mode, upon pressing power+lower vol+home it enters in downloading mode. I flashed 4 files + PIT of jovilonas but to disappointment. One strange thing I experienced that during flashing it always struck at image.ext.4 and failed, but I selected the T Flash option then it completed successfully but after reboot it is same as if there was no flashing at all. Before bricked it was having KitKat 4.4.2 and upon Kies software update check it showed country KSA Product Code NHK7 (as i recall but not sure about Product Code accuracy but at last there was 7, but dead sure about KSA as Country).
Please help me with flashable firmware link and proper procedure. Grateful to you.
____________________________________
Memory 1: as i have come to realize that my G901F was not Stock Rom Flashed and then Reflash to Root that ROM. It was already a Rooted Firmware Mod. Cause simply rooted Stock ROM when executed as Factory Reset it removes Root (as some one told me during my quest to unbrick it). Now it is clear to me that before flashing with Stock ROM, i factory restored the set but there was nothing changed and the root was there. Only issue was that it asks for wifi password whenever it restarts rather than storing it once.
Memory 2: There was no KNOX counter while it was on KITKAT 4.4.2. Neither in the Device Info nor in the Downloading mode (power+vol down+home). It always shows, ODIN MODE
MODEL G901F
System Binary Samsung official
System Status Custom
So, a long time ago I towelrooted my gs5 on 4.4.2 and just left it like that (no custom rom , kernel, or bootloader). I recently upgraded to an N6 and would like to sell the old phone now. I'm trying to return to stock, but my craptop died and I'm not able to Odin a stock .tar file. I've already used 'full unroot' in SU, but I'm still showing 'Custom' status. I can't OTA and I can't find a stock rom to flash from the factory recovery, so are there any other options I'm missing?
Thanks in advance!
Just factory reset it from stock recovery
*Detection* said:
Just factory reset it from stock recovery
Click to expand...
Click to collapse
Thanks for the reply. I actually tried factory resetting through the settings menu and the stock recovery. Both leave me with a 'custom' status and unable to OTA.
I'd suggest using ODIN to flash a stock ROM from sammobile dot com, but with it being Verizon, it's likely got a locked bootloader, and I'm not sure if you can flash anything with ODIN when the bootloader is locked, worth a try though, it'll just fail with an AUTH! if it doesn't work
Instructions are under the download on their site
if u rooted and trip your knox into 0*1 your are nvr getting OTA updates for my knowledge
vinura kithmal said:
if u rooted and trip your knox into 0*1 your are nvr getting OTA updates for my knowledge
Click to expand...
Click to collapse
Wrong, I tripped KNOX ages ago and can still receive OTA updates fine if I'm on 100% stock
*Detection* said:
Wrong, I tripped KNOX ages ago and can still receive OTA updates fine if I'm on 100% stock
Click to expand...
Click to collapse
i did not get any
thts why
sorry