Hey everyone I was just wondering what kind of range people were getting using remote streaming I've tried streaming from a mobile hot spot around my neighborhood and it works fine. However when I go to a friends house about two miles away it won't start steam. Should I be able to stream from that far away or is that just not possible
I don't actually have the shield but I don't think it should matter the actual distance from your home computer but the quality of the network you are on. (Good latency and good network speeds)
If I'm going to take a guess I'm going to suggest it's something needing to be configured on your friends network (Maybe forwarding a certain port to your shield)
That said as someone who wants to purchase the shield and im highly interested in streaming the shield outside my house how does it run on another network using VPN? What would you guess is your average latency and how is the audio sync?
Related
The BBC are streaming all their matches on their website... Possibilities???
Doubt it would work due to bandwidth issues.
chrisredmayne said:
The BBC are streaming all their matches on their website... Possibilities???
Click to expand...
Click to collapse
Do you have a link, might work with WiFi.
It won't matter come Sunday when your team is knocked out. Never mind the BBC might broadcast Eastenders instead... :wink:
hmmm, using orb? slingbox?
i watched today brazil ANNIHILATE japan right from my wizard at work.
I was the hero there today. Seriously.
No problem watching Ghana kick the US's backside around the field with a slingbox and mobile on the wizard. Even used ESPN HD just to see if I could.
reading on the slingbox it says 256Kbps upstream speed required (for out-of-home viewing), how did it show on ur wizard?
Explain how this is possible and what I need to do please?
Orb
I use orb to stream my tv, movies and music to my 8125 while I'm at work. Luckily we have a g based wifi access point that has a decent downstream to get good quality streams set up. Even with EDGE speeds I can only sustain a 60-100kb/sec stream. This is okay for music, but is no good for streaming live TV. You have to set up a "server" which is basically a Windows XP Media Center Edition box with a compatable TV Tuner card. Orb runs a program on your PC that uploads and streams the live tv, or basically any media stored on that PC to anywhere that has internet access. Make sure you setup your firewall to allow the orb desktop client server access. Everything should be golden after that. I recently droped my broadband service and have been leeching off of a neighbor's access point and have noticed some significant deterioration in the quality of the streams I get through orb. I'd reccomend that the PC with the Orb server runing not be connected via wifi for the most unrestricted access to upload bandwidth. Just check out http://www.orb.com for info and how-to set up the PC. On the pocet pc side you just go to the link above and type in your username/pass and select what you want to stream... Works like a charm.
radici said:
reading on the slingbox it says 256Kbps upstream speed required (for out-of-home viewing), how did it show on ur wizard?
Click to expand...
Click to collapse
Slingbox works fine over wi-fi. I have my slingbox hooked up to a DSL connection with something like 800k up - I forget actually - and when I go to a local cafe with wi-fi I can watch TV just fine on my MDA, even flipping it on its side to display landscape. It can control my directv PVR just fine.
It'd be hard to follow a soccer match real well, the ball would be hard to see I think.
radici said:
reading on the slingbox it says 256Kbps upstream speed required (for out-of-home viewing), how did it show on ur wizard?
Click to expand...
Click to collapse
Slingbox works fine over wi-fi. I have my slingbox hooked up to a DSL connection with something like 800k up - I forget actually - and when I go to a local cafe with wi-fi I can watch TV just fine on my MDA, even flipping it on its side to display landscape. It can control my directv PVR just fine.
It'd be hard to follow a soccer match real well, the ball would be hard to see I think.
We may be able to use the bbc's stream after a bit of poking around If someone can post me a link on there web site to the stream I have a look, to give you a idea here's one I found after abit of poking http://www.bbc.co.uk/newsa/n5ctrl/tvseq/n24/nb/wm/video/heads_nb.asx Ive used that for the last few years, great for a quick news update.
ok not perfect.... but im still looking for the narrow band feed
Live BBC One coverage: Germany v Sweden
http://www.bbc.co.uk/newsa/n5ctrl/sport/live/bb/wm/video/ukonly/sol_now6a_bb.asx
or Radio Five Live Feed
http://www.bbc.co.uk/fivelive/live/live.asx
radici said:
reading on the slingbox it says 256Kbps upstream speed required (for out-of-home viewing), how did it show on ur wizard?
Click to expand...
Click to collapse
I get the occasional jerkiness but overall, it does very well. It's impressive enough that I paid the $30 for the remote viewer app. Note that this is using T-Mobile's EDGE network. I don't think the 256 kbps matters a whole lot when the download speed is a lot less than that. I bought the slingbox so I could watch TV from the backyard patio using a laptop but since the PPC app was a free trial download, I figured I'd give it a shot. Now I'm completely hooked. I suppose your mileage may vary given network usage, EDGE speed in your area, blah blah blah etc and so on ad nauseum, but it works great for me.
Here's the deal and I don't know that this is the right forum but I don't notice it on any other device. I have a WiFi Router located in my Living Room. My kids bedrooms are located in the back of the house and I have not had a problem with WiFi on my laptop, Windows 6.5 or 7 phones, or Atrix 4g.
The problem:
When one of my kids takes my tablets into their room the internet in the entire house has trouble connecting. It only happens when the Tablet is far away in the back rooms. I was told this may be a priority setting but I don't know what that means or why this is happening. The signal is only 1 bar or 2 from that distance and the problem affects every device connected at that time meaning my wife and I would have our laptops next to the device and my other kid can have his Atrix connected and all of our devices no matter the distance stall out and won't connect. A lot of it is from streaming videos I THINK but if my signal is shared by each device the connection shouldn't be getting sapped by one of them.
any thoughts or ideas to fix this?
tomnationwide said:
A lot of it is from streaming videos I THINK but if my signal is shared by each device the connection shouldn't be getting sapped by one of them.
Click to expand...
Click to collapse
Completely false assumption. Any one device can totally saturate your connection... I for one would fine out WHAT the kids are streaming when they are in their room, and go from there...
youtube videos
I don't know if I should blame A500 or not, but after I got the A500 for a while, I experienced several times that my wifi router was in wrong state, I had to log into it and reset it.
Perhaps it's your router. I had a Netgear router that would freeze whenever I would connect to the internet with my phone browser but was just fine with my laptop/desktop, etc. I got a new router and everything has been working fine.
Hi,
Forgive me if this post has been repeated. In asking this question you will also see why a simple search of XDA is daunting due to the situation.
I live in a northern community in Canada - a native reserve tucked away in the woods, hours from cell reception and with a 90's version of 'high speed internet'. To put it in perspective, Netflix will stream with an average of four interruptions, with an average of two minutes per additional buffer; in this sleepy town, Sunday mornings bode excellent streams, but Monday nights are near impossible.
That said, at the school I work in we can load up on movies for easy watching at home. I have my old PC linked to my non-HDMI projector, and Plex theatre works like a charm.
My question: Excusing the lack of HDMI port, of course (I plan to invest in a couple small adapters to figure that one) - Is the ability of my Plex Server to cast to the Nexus Player hingant on an internet connection, or is it based upon connecting to the network and the capabilities of my router, its signal strength, etc? Ideally, I'd connect the Nexus to the projector and be able to stream local content from my PC without hiccups. Essentially, I want to know if I can stream locally without internet, and without hiccups.
Thanks for your help
Plex stream from local is based on your network and router. No Internet needed.
I bought a 4k TV for my bedroom, and am having difficulty getting a quality LOCAL connection from my router to my ShieldTV and am questioning if the ShieldTV's wifi module/antenna is the weak link. When I stream 4k videos, it always buffers, glitches badly, audio messes up, and when i try to game it lags pretty far behind despite moonlight saying i have low latency. So I am curious if anyone has this working without buffering or lag or glitches. If you have it working, please reply with your setup and anything you had to do, even if you dont know how to help me, below is a short explanation of my troubles.
Im in a (wifi congested) apartment complex, my apartment layout is basically:
Living room|Kitchen|Bedroom.
It's 2 walls and 23ish feet between my router and bedroom spot. There is only one cable spot (where my modem and router are) and zero jacks for Ethernet.
I originally thought my Netgear Nighthawk R8000, could push the signal well enough wirelessly, as everything is 5ghz AC and I only have 1 other device on it (also 5ghz ac), but I was only seeing 100-300mbps.
I have put the shieldTV next to my router and is works perfectly via lan, so I know it isnt a performance issue of the server (desktop) or shieldtv and only a question of getting a good signal.
So I just bought powerline adapters Trendnet TPL-421E2K, which were some of the best I could find in multiple reviews, and those perform roughly the same. If I put them right next to each other on the same wall, i get 600+mbps, but the max i got with them between rooms is 200mps, and thats with trying all the outlets and removing anything that could interfere. Guess wiring just sucks.
I am pretty much out of realistic ideas on how to make this work. The obvious, but not realistic solution is running 20ft of ethernet on my floor or taped to the ceiling.. But I am starting to wonder if the shieldTV just has crappy wifi and i'll never get this working.
Are you checking your speed with speedtest? I play 4k content on the fly and it works, unless bitrate is over 50, then it sometimes goes wrong.
Kajman said:
Are you checking your speed with speedtest? I play 4k content on the fly and it works, unless bitrate is over 50, then it sometimes goes wrong.
Click to expand...
Click to collapse
Speedtest checks your ISP speed. I am using a an app called "wifi speed test" that allows you to test your local internet speeds.
test878 said:
Im in a (wifi congested) apartment complex, my apartment layout is basically:
I originally thought my Netgear Nighthawk R8000, could push the signal well enough wirelessly, as everything is 5ghz AC and I only have 1 other device on it (also 5ghz ac), but I was only seeing 100-300mbps.
Click to expand...
Click to collapse
All of this
5GHz degrades faster than 2.4GHz due to distance / obstacles. Use 2.4GHz (not that this will help because of below)
Wifi is a shared, collision based medium. High density domestic wifi environment means highly variable latency, throughput.
4K uses a **** load of bandwidth
NVidia Shield streaming appears to me very latency and bandwidth sensitive (see above 3 points).
Sorry ethernet or bust for 4K ... I couldn't get it stable using Wifi in the same room even without wifi congestion.
My mom has just been moved into a nursing home, and they have Wifi, but they have the network firewalling her smart TV from the internet. Her phone and Ipad work fine on the network streaming Netflix, AppleTV, etc. but not the TV. I can't get chromecast working either. I have 2 shields at home, and was wondering if there is a work-around that lets the shield appear as a phone or tablet on the network. I'm would like to try it out on one of my shield pros before I drop the $$$ just to find out its not possible. Sideloading or rooting a possibility? Simplicity is paramount and it needs to work automatically since she's 78 and obviously tech savvy. Any suggestions?
It's the nursing home's firewall which you presumably have no access to. You could use cell data to circumvent it with an unlimited data plan if the signal strength is sufficient. 4G is capable of streaming HD but lower resolution may be needed depending on bandwidth. Use a cell phone as a hot spot... most tethering is capped at [email protected] so you may need to hack that as well.
Or simply use a phone or tablet to view it...
Never tried it as TV sucks today, but in the 60's it was a sight to behold. She probably misses her soaps, some things never change.