A little background info:
ATT GS4, rooted and on stock firmware
Had TWRP 2.6.0.0 on my phone
Tried to flash Illusion 7|15 or 7|16?
---------------------------------------------------
In the past, I've tried to flash illusion, with some success. I was able to get to the homescreen, but when I flashed my data backup. The phone wouldn't boot, so I reverted to stock. A few weeks later, I decide to take another spin at the rom and get it working. I wiped the data/cache/dalvik, and flashed the rom with gapps, rebooted the phone, and nothing happens. The phone keeps vibrating, but there is nothing happening past that.
After a significant amount of research, I've found a few tools/advice. I've downloaded ODIN and the (disgustingly large) tar file, but it doesn't have any use if the phone cannot be recognized by the computer since I am unable to enter download mode or recovery mode.
I found another tool that is supposed to "resurrect" the phone provided by legija. The only unfortunate part is there are no instructions provided, and once again, my computer isn't recognizing the phone as a device, as if it wasn't plugged in to the usb port at all. The application asks for a port number, but I have no clue what relevance a port number has, or at least that a usb port has a numerical value.
Anyway, is there anything left for me to do or is this a fancy new paperweight?
Excuse me for any poor grammar, I'm a little antsy about this
Gfrt94yn said:
A little background info:
ATT GS4, rooted and on stock firmware
Had TWRP 2.6.0.0 on my phone
Tried to flash Illusion 7|15 or 7|16?
---------------------------------------------------
In the past, I've tried to flash illusion, with some success. I was able to get to the homescreen, but when I flashed my data backup. The phone wouldn't boot, so I reverted to stock. A few weeks later, I decide to take another spin at the rom and get it working. I wiped the data/cache/dalvik, and flashed the rom with gapps, rebooted the phone, and nothing happens. The phone keeps vibrating, but there is nothing happening past that.
After a significant amount of research, I've found a few tools/advice. I've downloaded ODIN and the (disgustingly large) tar file, but it doesn't have any use if the phone cannot be recognized by the computer since I am unable to enter download mode or recovery mode.
I found another tool that is supposed to "resurrect" the phone provided by legija. The only unfortunate part is there are no instructions provided, and once again, my computer isn't recognizing the phone as a device, as if it wasn't plugged in to the usb port at all. The application asks for a port number, but I have no clue what relevance a port number has, or at least that a usb port has a numerical value.
Anyway, is there anything left for me to do or is this a fancy new paperweight?
Excuse me for any poor grammar, I'm a little antsy about this
Click to expand...
Click to collapse
Do you have AT&T insurance? Maybe the phone can have an accident? I would know of no other way to fix it if Odin isn't recognizing it. ):
Gfrt94yn said:
A little background info:
ATT GS4, rooted and on stock firmware
Had TWRP 2.6.0.0 on my phone
Tried to flash Illusion 7|15 or 7|16?
---------------------------------------------------
In the past, I've tried to flash illusion, with some success. I was able to get to the homescreen, but when I flashed my data backup. The phone wouldn't boot, so I reverted to stock. A few weeks later, I decide to take another spin at the rom and get it working. I wiped the data/cache/dalvik, and flashed the rom with gapps, rebooted the phone, and nothing happens. The phone keeps vibrating, but there is nothing happening past that.
After a significant amount of research, I've found a few tools/advice. I've downloaded ODIN and the (disgustingly large) tar file, but it doesn't have any use if the phone cannot be recognized by the computer since I am unable to enter download mode or recovery mode.
I found another tool that is supposed to "resurrect" the phone provided by legija. The only unfortunate part is there are no instructions provided, and once again, my computer isn't recognizing the phone as a device, as if it wasn't plugged in to the usb port at all. The application asks for a port number, but I have no clue what relevance a port number has, or at least that a usb port has a numerical value.
Anyway, is there anything left for me to do or is this a fancy new paperweight?
Excuse me for any poor grammar, I'm a little antsy about this
Click to expand...
Click to collapse
I've seen the repeated vibrating issue before from flashing the wrong file. Download mode was still accessible. Try again by hooking up the phone to the USB slot without the battery in it. Hold Vol Down + Home while inserting the battery. See if download mode will come up. If it does, Odin may not fix it, and you may end up using KIES, and that's if it does go into Download mode.
Phone is toast, fortunately the phone is still under warranty and they couldn't even get it to turn on so they replaced it
Still lost data, but it's not the end of the world. Thanks for the help though!
Gfrt94yn said:
Phone is toast, fortunately the phone is still under warranty and they couldn't even get it to turn on so they replaced it
Still lost data, but it's not the end of the world. Thanks for the help though!
Click to expand...
Click to collapse
Good deal man, glad you got a new one.
I have another question for somebody knowledgeable in rooting/rom flashing:
I think this was because the s4 bootloader is locked (through an update), would this cause the phone to hard brick? I've had nasty experiences in the past with locked bootloaders!
If it is locked, is there a way to unlock it? Or does it even need to be unlocked to flash a rom?
Thanks!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Gfrt94yn said:
I have another question for somebody knowledgeable in rooting/rom flashing:
I think this was because the s4 bootloader is locked (through an update), would this cause the phone to hard brick? I've had nasty experiences in the past with locked bootloaders!
If it is locked, is there a way to unlock it? Or does it even need to be unlocked to flash a rom?
Thanks!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
The bootloader is locked yes, but Loki is there to workaround that. What is the build version on your replacement?
JDQ39.I337UCUAMDL
Is Loki on xda? I haven't found anything like that yet, although I've heard many references to that
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Update:
Maybe I should open my eyes lol, found it in about 30 seconds
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
One more update:
I ran the casual root and now have my root and recovery. A couple of questions:
Does this also unlock the bootloader?
Somebody said that twrp flashes roms as if the bootloader is unlocked, so it wouldn't matter if it was or not. Is this true?
I guess really my question is, once I run casual root, is my phone ready to flash?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Gfrt94yn said:
One more update:
I ran the casual root and now have my root and recovery. A couple of questions:
Does this also unlock the bootloader?
Somebody said that twrp flashes roms as if the bootloader is unlocked, so it wouldn't matter if it was or not. Is this true?
I guess really my question is, once I run casual root, is my phone ready to flash?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Your phone is ready to flash, just make sure the ROM you flash has been Lokied or you'd have to flash a Loki kernel/LokiDoki after flashing the ROM (but before rebooting).
Gfrt94yn said:
One more update:
I ran the casual root and now have my root and recovery. A couple of questions:
Does this also unlock the bootloader?
Somebody said that twrp flashes roms as if the bootloader is unlocked, so it wouldn't matter if it was or not. Is this true?
I guess really my question is, once I run casual root, is my phone ready to flash?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
If you are going to use TWRP, make sure the ROM has LOKI applied, and if it doesn't, flash the Loki_Doki patch last before rebooting.
If you use OUDHS recovery, it will Auto-Loki whatever you flash.
Ladies and Gentlemen, I am proud to announce that I've successfully flashed a rom without bricking my phone! *applause*
I thank(ed) you all for the help!
GS4 running slimbean and kanged key lime pie theme.
GiantBallSack said:
If you are going to use TWRP, make sure the ROM has LOKI applied, and if it doesn't, flash the Loki_Doki patch last before rebooting.
If you use OUDHS recovery, it will Auto-Loki whatever you flash.
Click to expand...
Click to collapse
What happens if one accidentally reboots before flashing Loki? Just need to reboot back into recovery and flash it?
godefroi said:
What happens if one accidentally reboots before flashing Loki? Just need to reboot back into recovery and flash it?
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Related
Hello!
I had my S4 rooted and nandroid back up. I was trying to install this link:
http://forum.xda-developers.com/showthread.php?t=2316308
I installed it and gapp installed too and rebooted. I got this message appears
"System software not authorized by AT&T has been found on your phone"
upper corner in orange says "kernel Failed"
That means I did something wrong?
I read about odin. Does Stock rom get you back to fully stock?
Thanks
Did you run loki doki? see.your on at&t..locked bootloader and i dont think that rom is autolokied. Boot back into recovery flash ld.and see if it boots.
Yes odin will put your phone back to.stock,been there done that lol.
sent from my CleanRom 1.5 i337m
force70 said:
Did you run loki doki? see.your on at&t..locked bootloader and i dont think that rom is autolokied. Boot back into recovery flash ld.and see if it boots.
Yes odin will put your phone back to.stock,been there done that lol.
sent from my CleanRom 1.5 i337m
Click to expand...
Click to collapse
Ok, I been reading some threads about recovery, I didn't relieze, i was away from s3 so long. I just restored from backup data and it boots into this stuck Samsung screen with custom unlocked logo. Bootloop?
Havent seen that particular screen but yeah sounds like your bootlooped. If.you can three finger back into recovery and have a nandroid i would full wipe then Restore your back up (even though people.say restoring wipes anyway..id wipe.if u.are using twrp do not format data!).if.your still looped you may have to try and odin back to stock.firmware can be found on sammobile.com had to do this the other night due to a bad nandroid..lots of fun lol.
sent from my CleanRom 1.5 i337m
force70 said:
Havent seen that particular screen but yeah sounds like your bootlooped. If.you can three finger back into recovery and have a nandroid i would full wipe then Restore your back up (even though people.say restoring wipes anyway..id wipe.if u.are using twrp do not format data!).if.your still looped you may have to try and odin back to stock.firmware can be found on sammobile.com had to do this the other night due to a bad nandroid..lots of fun lol.
sent from my CleanRom 1.5 i337m
Click to expand...
Click to collapse
Thank you!:victory:
My heart dropped like fainting ghost after I see the at&t software showed up. I wiped factory reset and goes past the samsung with unlocked logo into at&t boot up like new phone. It took 5 mins to get into welcome screen. All is working.
Now, I begun to wondering why my logo says it bootloader unlocked and I download correct at&t rom is in? I use this causal download from this link:
http://forum.xda-developers.com/showthread.php?t=2297900
I am trying to understand and pick my first rom. Was thinking downloading pure google rom. Had to read again
That mod.will loki your kernel,prolly why it says unlocked. I.have the.canadian. version..unlocked already thank.god lol.
A.simple wipe can work wonders..if you can get into.recovery and have something.to.flash most times your gona be okay.
Glad your back in.business!
sent from my CleanRom 1.5 i337m
Flash another kernel made for your device, or go thru the ODIN thing, your choice. this is for anyone who have that triangle.
Yes, I read some thread and the roms need kernel, without kernel installed which was has leaded me into that warning att screen. I tried again with roms above link with ktoon kernel and made it through. I was probably be dumb. Pardon me, lots to relearn here.
I own iPhone 4s but I went back to android.
Sent from my SM-T310 using xda app-developers app
You should be able to get rid of that boot screen with the lock on it by using triangle away. http://forum.xda-developers.com/showthread.php?t=1494114
Does anyone know what that com2s and the one below it is? And anyway to delete them?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
[email protected] said:
Does anyone know what that com2s and the one below it is? And anyway to delete them?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
delete em (un-install), junk, are you getting spam and such? Did you install those? Do you have any protection on your device? Just curious.
Thank you
TheAxman said:
delete em (un-install), junk, are you getting spam and such? Did you install those? Do you have any protection on your device? Just curious.
Thank you
Click to expand...
Click to collapse
I can't find them to uninstall them just to force stop and unable them. Not getting any spam but I have used 4shared and and downloaded some stuff that didn't work and just download to my storage. No protection for my device. Any suggestions? I haven't had an android since the mytouch on T-Mobile years ago and I'm still new to this.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Hello All,
I am quite new to the world of Android, but have searched and read up for multiple days on this site before finally posting my issue.
I have a GS4 that had been running stock with the MF3 OTA update. I finally decided to root and install safestrap to mess with a few custom roms. Everything went well. I was able to create a Rom Slot and load a custom rom for testing whilst keeping my stock in original form. NO issues what so ever. I used the Wicked Rom.... Eventually I decided that I would delete Rom Slot 1 and go back to stock. I followed directions to the T, deleted the slot and selected to boot from Stock. NO GO. This is where the horror begins:
Now, the phone boots up but I see the Samsung Galaxy S4 logo and it stays there...does not go back. I no longer see the SafeStrap recovery screen when booting up. --- I cannot even get into recovery on the phone any longer: it says recovery booting in blue and stays there.
I am able to get into Download mode to re-flash - but naturally none of the stock firmware files are loadable via Odin due to an error I keep getting NAND Flash! (Fail).
I finally decided to drive to Best Buy and asked the guy to flash my phone to stock there. He put the phone in download mode and used their multiflash tool which did not detect the phone and thus he could not move forward. The laptop did detect the phone at best buy, but their software did not and thus flashing did not occur.
I am looking for any and all advice to get this phone running without having to return it to Samsung....please and thanks in advance.
My apologies if my search did not yield a positive result and there is something out there....
Well There is no way to flash with Odin while on MF3, so that effort is completely fruitless at this time. Did the guy try a different USB port, cord or even restarting the computer he was using?
Can you get into your recovery to do a factory reset?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Best buy should be able to do it. I remember reading somewhere that someone had to go to 3 different stores before they found someone smart enough to do it.. Lol
Sent from my SGH-I337 using XDA Premium HD app
I cannot get into recovery at all, it just says recovery booting and sits there....recovery booting is displayed at the top left of the screen in blue.
The guy did not try a different port or reboot. When he plugged the phone in, in download mode, the computer did recognize the phone but his Samsung software did not.
graydiggy said:
Well There is no way to flash with Odin while on MF3, so that effort is completely fruitless at this time. Did the guy try a different USB port, cord or even restarting the computer he was using?
Can you get into your recovery to do a factory reset?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well he is an idiot for not troubleshooting his system. I have had the same exact thing happen with multiple different computers and phones. The computer detects the device correctly, but the program I needed to use would not. More often than anything a quick changing of ports or a reboot of the computer fixed it. I have had to completely wipe out the drivers a few times and reinstall them to get it to work. 9 times out of ten, it is not the phone that is the culprit, it is something else before the phone.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
FIXED
Well it seems the guy at my best buy was a TOOL! I took the phone in again today, had the battery pulled before I arrived - put it in download mode for him. Told him that Samsung tech support said he should reboot his pc. He did. Voila, reflashed to stock. Thank goodness....thank you guys for the advice.
Apply cold water directly to burned area.
Who's awesome?
ME!
Anyways, glad you are back up.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
i have the VZW G2 (VS-980) and its stuck in fastboot mode. ive tried all the different methods listed in these forums and nothing has worked. i cant get into download mode as everytime i try, download mode shows for a second then goes into fastboot mode again. PLEASE HELP!!
simon_lefisch said:
i have the VZW G2 (VS-980) and its stuck in fastboot mode. ive tried all the different methods listed in these forums and nothing has worked. i cant get into download mode as everytime i try, download mode shows for a second then goes into fastboot mode again. PLEASE HELP!!
Click to expand...
Click to collapse
How the hell did you brick it? Give us some more background on what tweaks, root methods, flashing recovery methods did you use or else its hard to diagnose the issue.
ericdabbs said:
How the hell did you brick it? Give us some more background on what tweaks, root methods, flashing recovery methods did you use or else its hard to diagnose the issue.
Click to expand...
Click to collapse
ok. i was on stock. rooted with the IO method. wanted to flash a ROM (clean rom). downloaded ROM, wipe dalvik/cache/data. after reboot, phone booted into recovery mode. tried going into download mode to revert back to stock and LG FlashTool failed. said phone was the wrong model number (D802). the ROM i Downloaded said it was for VZW G2. obviously it wasnt. so i finally ended up using fastboot to push boot image and it booted, but in about phone, it says it D802 model (i just got it to boot, where as before i was stuck in fastboot mode). now i need to return to stock, but dont know how. any ideas?
Check out this thread:
http://forum.xda-developers.com/showthread.php?t=2517649&highlight=bricked
Gnarfsan said:
Check out this thread:
http://forum.xda-developers.com/showthread.php?t=2517649&highlight=bricked
Click to expand...
Click to collapse
well, i actually was able to restore a backup i had of my stock rom and that fixed the model number prob, however now i cant get into download mode so i can do a reflash :/
simon_lefisch said:
well, i actually was able to restore a backup i had of my stock rom and that fixed the model number prob, however now i cant get into download mode so i can do a reflash :/
Click to expand...
Click to collapse
Even following the steps posted in that thread?
Gnarfsan said:
Even following the steps posted in that thread?
Click to expand...
Click to collapse
yes. not sure why its doing that. is there any way that download mode can be deleted from the phone? also, how do you get into fastboot mode?
EDIT: nevermind. i finally got it into download mode!! (thank god!!) flashing right now. damn that was a pain in the ass. i was starting to freak out that i messed up my phone. this is my first LG phone so this process is a little new to me (been on moto for the last few years) thanks for trying to help me out. this was def a learning experience.
Phew, I'm glad to hear that. Some day I will be in the same situation
Sent from my LG-D802 using XDA Premium 4 mobile app
Just a quick question. Why would you even need to go into download mode to flash a Rom? Never once have I done that. Really, just curious.
Thanks Devs. From my VZW G2.
trickster2369 said:
Just a quick question. Why would you even need to go into download mode to flash a Rom? Never once have I done that. Really, just curious.
Thanks Devs. From my VZW G2.
Click to expand...
Click to collapse
I was thinking the same thing. It's best to stay out of those modes. Get a recovery installed ASAP and do everything that you need to do from there. I recommend TWRP Recovery.
Sent from my LG-D802 using XDA Premium 4 mobile app
Maybe because when flashing stock rom download mode is needed (atleast in my old sammy phone, maybe same in moto phones)
What's wrong with restoring the backup of the stock rom that should have been made before wiping and flashing a different rom? Not sure what I'm missing here.
Sent from my Nexus 10 using XDA Premium HD app
Download mode is useful to flash the entire phone back to stock using the OEM tools. It's not just for the stock ROM. It's everything. It's useful if you get a bit carried away in TWRP and wipe partitions you really shouldn't be touching. Or if you somehow manage to bork your recovery, or at least can't get into it. It's also good if you want your phone to be completely stock to sell it or to send it in on warranty. I'm sure someone could come up with other scenarios where it's useful.
But yes, it is a good idea to keep a backup of your stock ROM. And as always, know what you're flashing, make sure it's for your phone and check md5s. And be mindful of what you're doing in recovery. You should be able to avoid most issues. Download mode is indeed something you shouldn't be using often but as I said above there are situations where it is useful or necessary. It's actually something I suggest you know how to use. I say it's always a good idea to know how to get back to complete stock for warranty stuff, selling, or if something just goes majorly wrong.
The Rom I was trying to flash was apparently for a different model number, yet it was under the Verizon thread. There was no md5 to cross reference. In the end I ended up finding the proper boot image/twrp files and pushed them via fastboot (since I was unable to use adb) which then allowed more to restore a backup of the original Rom. Just took me all night to finally get back to stock. Then I decided to restore to out-of-the-box stock just to make sure all files weren't corrupted our anything.
Sent from my VS980 4G using Tapatalk
Not for nothing, but I ran the LG flash tool without putting the phone in download mode and it worked fine.
Semantics said:
Not for nothing, but I ran the LG flash tool without putting the phone in download mode and it worked fine.
Click to expand...
Click to collapse
Hmm.....interesting. I may try that next time I have to flash to stock.
Sent from my VS980 4G using Tapatalk
Same Problem
simon_lefisch said:
The Rom I was trying to flash was apparently for a different model number, yet it was under the Verizon thread. There was no md5 to cross reference. In the end I ended up finding the proper boot image/twrp files and pushed them via fastboot (since I was unable to use adb) which then allowed more to restore a backup of the original Rom. Just took me all night to finally get back to stock. Then I decided to restore to out-of-the-box stock just to make sure all files weren't corrupted our anything.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
Can you fill me in on how you used fastboot to install twrp? I am in the same boat right now...
i'm stuck as well in Fastboot and can't figure it out
emmur0 said:
i'm stuck as well in Fastboot and can't figure it out
Click to expand...
Click to collapse
I sent you a pm
You can you adb side load which is the same for flashing rom, pushing, or pulling file from the phone which is the first thing to learn before flashing anything to the new device that you got and know nothing about.
Sent from my LG-LS980 using xda premium
OK, so here is the current situation. I've been searching, reading, and following different recovery procedures, but nothing seems to be working as it should, so now I'm posting here to get some guidance as to how to proceed.
I have a Verizon VS980. I had Malladus ROM 1.2.4 with furnace 0.1.0 kernel installed. I have Philz Touch recovery. I wanted to try out Sliding Lockscreen, but when I got installed and tried to reboot, my phone went into a boot loop. I booted to recovery and tried to restore a backup, but it said it couldn't find any backups... although I did have backups. This is when I started getting confused. I tried wiping cache and dalvik, no effect. I read through a bunch of threads here, tried a bunch of things that worked for other people, etc. Finally said screw it and did a factory reset through Philz. No joy. Tried several different methods to revert to stock. No joy. Oy vey.
So now the bottom line is it only gets to the LG screen with the LED doing its color changing thing, and thats it. Stops there. I CAN boot to Philz Touch recovery by power+vol. down, go through the factory hard reset menu, then it gets to Philz. Now, there has got to be a way to regain my phone from here. Like I said, I tried the 2 different methods to revert to stock... I can get all the way to the point it supposed to start flashing the stock ROM with the tot file method, but it just doesn't start flashing the ROM when its supposed to. Is there a way I can get a ROM from my computer to the phone? When I enter download mode (vol. up while plugging in USB), it says updating firmware, warns not to unplug while its updating, but its not doing anything at all, and at the bottom of the screen in a box it says something like "b100" in the top left corner of the box, and "ROOTED" in red letters at the bottom.
So, what in sam hell is going on with my phone, and how do I fix it? Is there a way to get either the stock ROM or Malladus from my computer to the phone so I can re-flash? I'm thinking thats all I need to do to get out of this.
Please... someone help a totally confused and now smartphone deprived guy? Please?
Dude, are u running the flash tool on pc while trying to flash stock rom? Just booting into download mode won't help. Or u can transfer a rom to a USB drive, connect it to ur mobile via OTG cable and then flash the rom via recovery
Sent from my LG-D802 using XDA Premium 4 mobile app
jaidev.s said:
Dude, are u running the flash tool on pc while trying to flash stock rom? Just booting into download mode won't help. Or u can transfer a rom to a USB drive, connect it to ur mobile via OTG cable and then flash the rom via recovery
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I was able to revert to stock. After stepping away from the computer and phone, taking a cig break and a few deep breaths, I reread the tot revert instructions for 127th time. Found my mistake... I kept forgetting to change the com port to 41. Did that, revert worked just like it was supposed to for people who are not blind idiots who miss crucial little tidbits like that. I can't believe I kept missing that. COM Port 41 is ingrained in my memory forever. I may have to get a tattoo of it now.
I went so crazy trying to find the solution (yeah, didn't think of a flash drive either) because I was so determined not to have to resort to posting in the forum. The moment I give up... boom, I figure it out. Live and learn.....
Well, on to re-rooting the phone, re-flashing Malladus, and re-downloading all my crap...
Lol, happy to know that ur phone is back working, cheers mate
Sent from my LG-D802 using XDA Premium 4 mobile app
Hey all,
my wife dropped my previous Nexus 4 many times and now the screen is dead. Would like to sell it for parts. Digitizer still works. Now, I would like to clean everthing, and it a perfect world, install Lollipop!
But, I need to get access to the phone. I've spent many hours now reading different methods, but I'm getting to a common issue: USB debug (ADB) not enabled. I would need to get in recovery mode and put a custom ROM. However, even with the method to get into recovery mode, I would need the screen at the choice at boot to select Recovery, unless someone here tells me exactly what button to press to get into this.
I'm also open for any other solution.
Is the bootloader unlocked? Do you have a custom recovery? If your bootloader is unlocked you can boot into twrp custom recovery and get access to your files though it.
Sent from my Nexus 9 using XDA Free mobile app
Well I only got in the boot when I got the phone the first time a year ago and wiped everything to factory, so I don't think I still have the bootloader unlocked, unless wiping everything doesn't wipe the bootloader.
kensiko32 said:
Well I only got in the boot when I got the phone the first time a year ago and wiped everything to factory, so I don't think I still have the bootloader unlocked, unless wiping everything doesn't wipe the bootloader.
Click to expand...
Click to collapse
Unless you specifically unlocked it using fastboot or a tool kit I doubt it's unlocked. Which is too bad because it would have made it easier to get to the files. Now you'll have to blindly use the keys to get into recovery and do a factory reset. And hope for the best because you'll probably never know for sure whether you got it right or not.
Sent from my Nexus 5 using XDA Free mobile app