Hello All,
I am quite new to the world of Android, but have searched and read up for multiple days on this site before finally posting my issue.
I have a GS4 that had been running stock with the MF3 OTA update. I finally decided to root and install safestrap to mess with a few custom roms. Everything went well. I was able to create a Rom Slot and load a custom rom for testing whilst keeping my stock in original form. NO issues what so ever. I used the Wicked Rom.... Eventually I decided that I would delete Rom Slot 1 and go back to stock. I followed directions to the T, deleted the slot and selected to boot from Stock. NO GO. This is where the horror begins:
Now, the phone boots up but I see the Samsung Galaxy S4 logo and it stays there...does not go back. I no longer see the SafeStrap recovery screen when booting up. --- I cannot even get into recovery on the phone any longer: it says recovery booting in blue and stays there.
I am able to get into Download mode to re-flash - but naturally none of the stock firmware files are loadable via Odin due to an error I keep getting NAND Flash! (Fail).
I finally decided to drive to Best Buy and asked the guy to flash my phone to stock there. He put the phone in download mode and used their multiflash tool which did not detect the phone and thus he could not move forward. The laptop did detect the phone at best buy, but their software did not and thus flashing did not occur.
I am looking for any and all advice to get this phone running without having to return it to Samsung....please and thanks in advance.
My apologies if my search did not yield a positive result and there is something out there....
Well There is no way to flash with Odin while on MF3, so that effort is completely fruitless at this time. Did the guy try a different USB port, cord or even restarting the computer he was using?
Can you get into your recovery to do a factory reset?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Best buy should be able to do it. I remember reading somewhere that someone had to go to 3 different stores before they found someone smart enough to do it.. Lol
Sent from my SGH-I337 using XDA Premium HD app
I cannot get into recovery at all, it just says recovery booting and sits there....recovery booting is displayed at the top left of the screen in blue.
The guy did not try a different port or reboot. When he plugged the phone in, in download mode, the computer did recognize the phone but his Samsung software did not.
graydiggy said:
Well There is no way to flash with Odin while on MF3, so that effort is completely fruitless at this time. Did the guy try a different USB port, cord or even restarting the computer he was using?
Can you get into your recovery to do a factory reset?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well he is an idiot for not troubleshooting his system. I have had the same exact thing happen with multiple different computers and phones. The computer detects the device correctly, but the program I needed to use would not. More often than anything a quick changing of ports or a reboot of the computer fixed it. I have had to completely wipe out the drivers a few times and reinstall them to get it to work. 9 times out of ten, it is not the phone that is the culprit, it is something else before the phone.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
FIXED
Well it seems the guy at my best buy was a TOOL! I took the phone in again today, had the battery pulled before I arrived - put it in download mode for him. Told him that Samsung tech support said he should reboot his pc. He did. Voila, reflashed to stock. Thank goodness....thank you guys for the advice.
Apply cold water directly to burned area.
Who's awesome?
ME!
Anyways, glad you are back up.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Related
PLEASEEE!!! help me out i tried upgrading from kies mini to froyo. I did this with success earlier in the past on my old vibrant but had it replaced to a referbished one and i tried upgrading it now.. but my vibrant was stuck at downloading the uprade on kies mini at 1% for half an hour... and the vibrant had the android shoveling yellow sign saying do not turn off target... for half an hour as well.. I knew something was wrong there because it didnt take even close to that long last time..
NOW I tried unplugging the usb wire restarting the phone in emergency mode still nothing... now all i have is a cellphone...yeild sign... computer icon showing..
PLEASE HELP!!!
Dont worry you totally didnt brick your phone. Its pretty common, can you get your phone into download mode? If you can then just odin to stock.
1.Take your battery, sim card and SD card out
2. Plug in USB Cable
3. Hold volume up/down and plug in battery (There are a few ways of doing download mode and I believe its phone specific, or if you have bootloaders installed its different as well, google around a bit...
4. Start odin and presto, your phone works again!
hey thanx... I just did that.. I never used odin but i installed odin with all the files... I believe my vibrant is hardware locked because i was trying to get into download mode for 2 hours with different techniques.. such as just volume keys and power button... taking out the battery holding volume keys then putting it back in.. but nothing put me into a downlaod mode... somehow odin still found my phone while i was still stuck under that picture...
I loaded the .pit file without the jfd image.... becuase i didnt know what window i was suppose to load the jfd image from... like pda.. or etc???
anyway so i just loaded the .pit file and clicked start it reset the phone and the phone went into restart mode and it turned on fine i checked it works fully... lol.
It makes no sense... was i suppose to load the jfd file somewhere?????
i still want to upgrade my vibrant to 2.2... but now whenever i turn on the keis mini it promps me to emergency recovery upgrade... so i tried doing that and went into download mode since now i can.. and plugged in my phone but the progress bar on my computer for upgrading never moved from 0%... its odd... am i doing something wrong?
so again i disconnected and "bricked" my vibrant again lol... went into odin followed the same steps just loading the .pit file and it reset the vibrant back to normal again lol...
Im so confused yet happy that i have my phone working but i still want my froyo... i love the fact that i can use yahoo video messaging on it with froyo and have flash and other benefits..
any advice?
Thanx again
try this...........
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
put pit in pit and tar in pda on odin
Connect it to the PC and see if ODIN recognizes it.
If it does, you are safe, flash stock.
EDIT: nvm, didn't notice the third post was yours.
Anyways, if ODIN can STILL recognize it, get the first from the link on the post above, FOLLOW INSTRUCTIONS and enjoy your again-useful phone.
I had that same issue once.
Try a JIG. And do a search, I see like 50 posts a week like this.
First.
Thank you all for taking your time to help. I have one last question... since I used Odin but it just reset my phone and I didn't flash the old firware on it..... ever since that now I tried to update my phone with kies mini and it says phone unregistered... in that place before it used to say new firmware available and showed old forward numbers/letters.
So if I use odin all the way will this resolve "unregistered device" problem?
Thanx again
Sent from my SGH-T959 using XDA App
AlexSochi8 said:
First.
Thank you all for taking your time to help. I have one last question... since I used Odin but it just reset my phone and I didn't flash the old firware on it..... ever since that now I tried to update my phone with kies mini and it says phone unregistered... in that place before it used to say new firmware available and showed old forward numbers/letters.
So if I use odin all the way will this resolve "unregistered device" problem?
Thanx again
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
It should.
Sent from my GT-I9000 using XDA Premium App
Bricked
I have a similar issue, was soft bricked, Odin to stock then, while using Mini Kies to upgrade back to Froyo the phone turned off and never came back on. I cannot get any response from the phone as far as light's or sounds. Checked a few batteries and still no use. I'm curious if anybody else has had a similar experience?
so if it should solve the unregisted problem... where I put in the pda file... is it possible to put in the last froyo there so odin could flash froyo on my phone so basically i wont have to go through kies process?
odin back to 2.1 then root and then flash a 2.2 rom way better then a stock 2.2 rom
Dan_Brutal said:
Try a JIG. And do a search, I see like 50 posts a week like this.
Click to expand...
Click to collapse
I might be late to the party but I've built a jig and I can't believe how quickly this thing saved my ass...
Sent from my GT-I9000 using XDA Premium App
dsuycott said:
I might be late to the party but I've built a jig and I can't believe how quickly this thing saved my ass...
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Yeah man. Jigs are the balls. Saved my ass this morning with a bad bootloader flash. I got lucky though.....
Sent from my GT-I9000 using XDA Premium App
Make sure you have the right odin files, once you have gotten back to normal just do a factory reset on your phone if that is possible. Then root, flash, and do whatever you want to do. Without your proper files for odin you'll get bricked or get something different.
How screwed am I? Odin doesn't recognize phone, vibrant aio toolkit can't adb phone into recovery or download mode. Flashing different rom screwed up during kernal phase and I stupidly rebooted phone. I CAN use a jig I bought to get into download mode but computer Odin doesn't 'see' it.
Sent from my GT-I9000 using XDA Premium App
dcboi said:
How screwed am I? Odin doesn't recognize phone, vibrant aio toolkit can't adb phone into recovery or download mode. Flashing different rom screwed up during kernal phase and I stupidly rebooted phone. I CAN use a jig I bought to get into download mode but computer Odin doesn't 'see' it.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Do you have the drivers installed on your PC?
Sent from my GT-I9000 using XDA Premium App
Dan_Brutal said:
Do you have the drivers installed on your PC?
Yes, not sure what changed but I plugged the phone in again and Odin recognized it, the file I loaded is PDA_T959UVKB5.tar.md5, the process has hung up at SetupConnection...
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA Premium App
id keep trying it odin is finicky! maybe try different usb ports
ok guys i know i aksed for a lot of help.. but i have a newly discovered problem.. when i connect my vibrant thru the original usb port to transfer files back and forth it never lets me transfer even the smallest picture image... on both internal 16gb or sd... the phone computer just constantly shows transferring animation.... i tried many times.. i even scanned the phones hard drive and sd card for errors... nothing... could it be i messed something up with kies? or thats why kies in general never went with the upgrade past 1%?
its a refurbished phone.. when i got it.. i uploaded my old pics without a problem with the same usb cable..... its weird.... i dont know what to do? what is it likely the phone itself or i messed it up with kies upgrade????
please help.. its frustrating me
ok, maybe not 100's of times but my bootloader showed 52 last time i flashed. Not sure what happened, but something went wrong. My phone only shows a picture of a phone, with a yellow triangle, and a picture of a computer. Under that it says firmware failed, and under that it says try recovery mode. Download mode, and recovery mode shows the the same screen described as above, and odin does not see phone. I left the battery out over night, and this morning, the same screen, and odin still don't see the phone. I know all the key combos to get into recovery or download mode, and neither works.
You have a bricked phone now. Use JIG USB to save it!
I had similar problem and resolved mine by removing the battery, reinserting it and holding down volume down and home keys while powering on (download mode). Then I connected phone to pc via usb and used odin to flash kernel. Hope that works for you.
Or you could try this
One-Click UnBrick
it seems this is the job for a USB jig (I think)
Sent from my GT-I9100 using Tapatalk
Have you tried recovery firmware option via KIES?
Bah, just take out battery and put it back in and go to download mode and flash the firmware with Odin.
Thanks God i've got my Jig..
is it related with the limitation write of the NAND flash? quite worry about it..any idea?
You only need a jig if you can't get into download mode. Though from what I've read on here might be good to have to reset the flash counter.
Sent from my GT-I9000 using XDA Premium App
hansonator said:
You only need a jig if you can't get into download mode. Though from what I've read on here might be good to have to reset the flash counter.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
and pretty sure the OP said he can't get into download mode...hence the need for a jig...
Sent from my GT-I9100 using Tapatalk
Does the number of times flashed has anything to do with the failure? Is there a limit after which the hardware gets weaker?
Believe me. Most rom chefs or developers in here flash at least 500+ times (if they tested their product) and I don't think they have issue. (I flash my X1 at least a 1000+ times when I was a rom chef and it's still working great now)
Flash memory does have a life span on number or Read/write. But I doubt anyone here can reach that limit with 3+ yrs (by that time, you will probably get another phone).
Agreed its unlikely that 50 odd our even a few hundred rom flashes should damage your nand memory. Unless it was faulty in the first place
Sent from my GT-I9100 using XDA App
This problem..
..Was notorious on the Captivate. We lovingly referred to it "Phone ! Computer" screen.
The good news.. If you see this screen the level 1 boot loader is fine and you are only soft bricked.
If you ever plug in the phone to a power source with it turned off and you see nothing then you're screwed.
Same scenario as when you plug in a JiG and nothing happens.
budco2000 said:
My phone only shows a picture of a phone, with a yellow triangle, and a picture of a computer.
Click to expand...
Click to collapse
Hold and do not release the key combo for DLM, your phone will reboot about 3 times it should then enter DLM.
I did try this before your reply and no go, I tried again today, got the same screen, however Odin and kies, both saw the phone, went back to stock then back to cognition 1.31. My captivate, inspire, and infuse ive flashed over and over and over and never bricked a phone until my S2. It's back up and going strong now. Now im afraid to flash it again. This is best phone ever and im keeping it until the S3 comes out, so im trying to not render my S2 useless yet lol
Sent from my GT-I9100 using XDA Premium App
You've developed flashphobia?
Intratech said:
You've developed flashphobia?
Click to expand...
Click to collapse
For days, odin and kies didn't see phone no matter what I did. I'm not a developer, but I'm nowhere close to a rookie either. What ever happen was a hoax, because clockwork and download mode works as it should again. Next update for cognition i'll flash, i doubt anything will happen.
budco2000 said:
For days, odin and kies didn't see phone no matter what I did. I'm not a developer, but I'm nowhere close to a rookie either. What ever happen was a hoax, because clockwork and download mode works as it should again. Next update for cognition i'll flash, i doubt anything will happen.
Click to expand...
Click to collapse
**** happens. Flashes go right 99.9% of the time when you do everything right. You just hit that 0.1% where something went wrong during the flash.
A little background info:
ATT GS4, rooted and on stock firmware
Had TWRP 2.6.0.0 on my phone
Tried to flash Illusion 7|15 or 7|16?
---------------------------------------------------
In the past, I've tried to flash illusion, with some success. I was able to get to the homescreen, but when I flashed my data backup. The phone wouldn't boot, so I reverted to stock. A few weeks later, I decide to take another spin at the rom and get it working. I wiped the data/cache/dalvik, and flashed the rom with gapps, rebooted the phone, and nothing happens. The phone keeps vibrating, but there is nothing happening past that.
After a significant amount of research, I've found a few tools/advice. I've downloaded ODIN and the (disgustingly large) tar file, but it doesn't have any use if the phone cannot be recognized by the computer since I am unable to enter download mode or recovery mode.
I found another tool that is supposed to "resurrect" the phone provided by legija. The only unfortunate part is there are no instructions provided, and once again, my computer isn't recognizing the phone as a device, as if it wasn't plugged in to the usb port at all. The application asks for a port number, but I have no clue what relevance a port number has, or at least that a usb port has a numerical value.
Anyway, is there anything left for me to do or is this a fancy new paperweight?
Excuse me for any poor grammar, I'm a little antsy about this
Gfrt94yn said:
A little background info:
ATT GS4, rooted and on stock firmware
Had TWRP 2.6.0.0 on my phone
Tried to flash Illusion 7|15 or 7|16?
---------------------------------------------------
In the past, I've tried to flash illusion, with some success. I was able to get to the homescreen, but when I flashed my data backup. The phone wouldn't boot, so I reverted to stock. A few weeks later, I decide to take another spin at the rom and get it working. I wiped the data/cache/dalvik, and flashed the rom with gapps, rebooted the phone, and nothing happens. The phone keeps vibrating, but there is nothing happening past that.
After a significant amount of research, I've found a few tools/advice. I've downloaded ODIN and the (disgustingly large) tar file, but it doesn't have any use if the phone cannot be recognized by the computer since I am unable to enter download mode or recovery mode.
I found another tool that is supposed to "resurrect" the phone provided by legija. The only unfortunate part is there are no instructions provided, and once again, my computer isn't recognizing the phone as a device, as if it wasn't plugged in to the usb port at all. The application asks for a port number, but I have no clue what relevance a port number has, or at least that a usb port has a numerical value.
Anyway, is there anything left for me to do or is this a fancy new paperweight?
Excuse me for any poor grammar, I'm a little antsy about this
Click to expand...
Click to collapse
Do you have AT&T insurance? Maybe the phone can have an accident? I would know of no other way to fix it if Odin isn't recognizing it. ):
Gfrt94yn said:
A little background info:
ATT GS4, rooted and on stock firmware
Had TWRP 2.6.0.0 on my phone
Tried to flash Illusion 7|15 or 7|16?
---------------------------------------------------
In the past, I've tried to flash illusion, with some success. I was able to get to the homescreen, but when I flashed my data backup. The phone wouldn't boot, so I reverted to stock. A few weeks later, I decide to take another spin at the rom and get it working. I wiped the data/cache/dalvik, and flashed the rom with gapps, rebooted the phone, and nothing happens. The phone keeps vibrating, but there is nothing happening past that.
After a significant amount of research, I've found a few tools/advice. I've downloaded ODIN and the (disgustingly large) tar file, but it doesn't have any use if the phone cannot be recognized by the computer since I am unable to enter download mode or recovery mode.
I found another tool that is supposed to "resurrect" the phone provided by legija. The only unfortunate part is there are no instructions provided, and once again, my computer isn't recognizing the phone as a device, as if it wasn't plugged in to the usb port at all. The application asks for a port number, but I have no clue what relevance a port number has, or at least that a usb port has a numerical value.
Anyway, is there anything left for me to do or is this a fancy new paperweight?
Excuse me for any poor grammar, I'm a little antsy about this
Click to expand...
Click to collapse
I've seen the repeated vibrating issue before from flashing the wrong file. Download mode was still accessible. Try again by hooking up the phone to the USB slot without the battery in it. Hold Vol Down + Home while inserting the battery. See if download mode will come up. If it does, Odin may not fix it, and you may end up using KIES, and that's if it does go into Download mode.
Phone is toast, fortunately the phone is still under warranty and they couldn't even get it to turn on so they replaced it
Still lost data, but it's not the end of the world. Thanks for the help though!
Gfrt94yn said:
Phone is toast, fortunately the phone is still under warranty and they couldn't even get it to turn on so they replaced it
Still lost data, but it's not the end of the world. Thanks for the help though!
Click to expand...
Click to collapse
Good deal man, glad you got a new one.
I have another question for somebody knowledgeable in rooting/rom flashing:
I think this was because the s4 bootloader is locked (through an update), would this cause the phone to hard brick? I've had nasty experiences in the past with locked bootloaders!
If it is locked, is there a way to unlock it? Or does it even need to be unlocked to flash a rom?
Thanks!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Gfrt94yn said:
I have another question for somebody knowledgeable in rooting/rom flashing:
I think this was because the s4 bootloader is locked (through an update), would this cause the phone to hard brick? I've had nasty experiences in the past with locked bootloaders!
If it is locked, is there a way to unlock it? Or does it even need to be unlocked to flash a rom?
Thanks!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
The bootloader is locked yes, but Loki is there to workaround that. What is the build version on your replacement?
JDQ39.I337UCUAMDL
Is Loki on xda? I haven't found anything like that yet, although I've heard many references to that
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Update:
Maybe I should open my eyes lol, found it in about 30 seconds
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
One more update:
I ran the casual root and now have my root and recovery. A couple of questions:
Does this also unlock the bootloader?
Somebody said that twrp flashes roms as if the bootloader is unlocked, so it wouldn't matter if it was or not. Is this true?
I guess really my question is, once I run casual root, is my phone ready to flash?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Gfrt94yn said:
One more update:
I ran the casual root and now have my root and recovery. A couple of questions:
Does this also unlock the bootloader?
Somebody said that twrp flashes roms as if the bootloader is unlocked, so it wouldn't matter if it was or not. Is this true?
I guess really my question is, once I run casual root, is my phone ready to flash?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Your phone is ready to flash, just make sure the ROM you flash has been Lokied or you'd have to flash a Loki kernel/LokiDoki after flashing the ROM (but before rebooting).
Gfrt94yn said:
One more update:
I ran the casual root and now have my root and recovery. A couple of questions:
Does this also unlock the bootloader?
Somebody said that twrp flashes roms as if the bootloader is unlocked, so it wouldn't matter if it was or not. Is this true?
I guess really my question is, once I run casual root, is my phone ready to flash?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
If you are going to use TWRP, make sure the ROM has LOKI applied, and if it doesn't, flash the Loki_Doki patch last before rebooting.
If you use OUDHS recovery, it will Auto-Loki whatever you flash.
Ladies and Gentlemen, I am proud to announce that I've successfully flashed a rom without bricking my phone! *applause*
I thank(ed) you all for the help!
GS4 running slimbean and kanged key lime pie theme.
GiantBallSack said:
If you are going to use TWRP, make sure the ROM has LOKI applied, and if it doesn't, flash the Loki_Doki patch last before rebooting.
If you use OUDHS recovery, it will Auto-Loki whatever you flash.
Click to expand...
Click to collapse
What happens if one accidentally reboots before flashing Loki? Just need to reboot back into recovery and flash it?
godefroi said:
What happens if one accidentally reboots before flashing Loki? Just need to reboot back into recovery and flash it?
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Hey guys rookie mistake went to flash a new seemingly successful rom and forgot to make a back up first. Now my phone is on but black screen. I can get into recovery but I have no backup. Also when I connect my phone to the computer it no longer recognizes it. I have all up to date drivers. They worked yesterday. Ive been reading about bricked g2 on boot loop and other variances and trying different things all day with no success. Any help or advice would be greatly appreciated. Thank you in advance.
bump
This may have been discussed before. Ive searched here and google. Plenty of horror stories and the only one ive seen with the same problem never got a fix or least didnt reply on the boards about being fixed. My phone will not turn off no matter what I do. The screen is slightly lite up and will only boot to recovery(where I have no backups) and download mode where it basically does nothing and will not connect to my computer reguardless of it having the right drivers. So I have no way to my knowledge to flash a new/stock rom. I even got desperate and did a hard reset. Changed nothing but deleted the original rom I was attempting to flash.
Install pda net driver or koush drivers.
Sent from my LG-D800 using Tapatalk
Ok I'll try that. Ty
Sent from my SM-T217S using xda app-developers app
OK, so here is the current situation. I've been searching, reading, and following different recovery procedures, but nothing seems to be working as it should, so now I'm posting here to get some guidance as to how to proceed.
I have a Verizon VS980. I had Malladus ROM 1.2.4 with furnace 0.1.0 kernel installed. I have Philz Touch recovery. I wanted to try out Sliding Lockscreen, but when I got installed and tried to reboot, my phone went into a boot loop. I booted to recovery and tried to restore a backup, but it said it couldn't find any backups... although I did have backups. This is when I started getting confused. I tried wiping cache and dalvik, no effect. I read through a bunch of threads here, tried a bunch of things that worked for other people, etc. Finally said screw it and did a factory reset through Philz. No joy. Tried several different methods to revert to stock. No joy. Oy vey.
So now the bottom line is it only gets to the LG screen with the LED doing its color changing thing, and thats it. Stops there. I CAN boot to Philz Touch recovery by power+vol. down, go through the factory hard reset menu, then it gets to Philz. Now, there has got to be a way to regain my phone from here. Like I said, I tried the 2 different methods to revert to stock... I can get all the way to the point it supposed to start flashing the stock ROM with the tot file method, but it just doesn't start flashing the ROM when its supposed to. Is there a way I can get a ROM from my computer to the phone? When I enter download mode (vol. up while plugging in USB), it says updating firmware, warns not to unplug while its updating, but its not doing anything at all, and at the bottom of the screen in a box it says something like "b100" in the top left corner of the box, and "ROOTED" in red letters at the bottom.
So, what in sam hell is going on with my phone, and how do I fix it? Is there a way to get either the stock ROM or Malladus from my computer to the phone so I can re-flash? I'm thinking thats all I need to do to get out of this.
Please... someone help a totally confused and now smartphone deprived guy? Please?
Dude, are u running the flash tool on pc while trying to flash stock rom? Just booting into download mode won't help. Or u can transfer a rom to a USB drive, connect it to ur mobile via OTG cable and then flash the rom via recovery
Sent from my LG-D802 using XDA Premium 4 mobile app
jaidev.s said:
Dude, are u running the flash tool on pc while trying to flash stock rom? Just booting into download mode won't help. Or u can transfer a rom to a USB drive, connect it to ur mobile via OTG cable and then flash the rom via recovery
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I was able to revert to stock. After stepping away from the computer and phone, taking a cig break and a few deep breaths, I reread the tot revert instructions for 127th time. Found my mistake... I kept forgetting to change the com port to 41. Did that, revert worked just like it was supposed to for people who are not blind idiots who miss crucial little tidbits like that. I can't believe I kept missing that. COM Port 41 is ingrained in my memory forever. I may have to get a tattoo of it now.
I went so crazy trying to find the solution (yeah, didn't think of a flash drive either) because I was so determined not to have to resort to posting in the forum. The moment I give up... boom, I figure it out. Live and learn.....
Well, on to re-rooting the phone, re-flashing Malladus, and re-downloading all my crap...
Lol, happy to know that ur phone is back working, cheers mate
Sent from my LG-D802 using XDA Premium 4 mobile app