LG L5 e610 JB charging - Optimus L3, L5, L7 Q&A, Help & Troubleshooting

Hei,
I have a problem after upgrading to jelly bean. The phone doesnt boot if charger is plugged in. It just goes back to charging mode even if it has been charging for a while. To boot, I have to unplug, start and then replug charger after phone has started. Has anyone else experienced this?
Maybe something is wrong with the bootloader? I have root and CWM and unlocked bootloader.

I have the same problem, dude, and I didn't find anything on the net
juke_001 said:
Hei,
I have a problem after upgrading to jelly bean. The phone doesnt boot if charger is plugged in. It just goes back to charging mode even if it has been charging for a while. To boot, I have to unplug, start and then replug charger after phone has started. Has anyone else experienced this?
Maybe something is wrong with the bootloader? I have root and CWM and unlocked bootloader.
Click to expand...
Click to collapse

i ve the stock rom and i havent this problem 4.1.2 v20d
my bug:
3g problem
browser crash

Related

stuck on the red M logo while charging

Ok, so I have a Bell atrix and followed the instructions on this thread to install GreyBlur:
http://forum.xda-developers.com/showthread.php?t=1070076
I have not done deodex on the phone.
My phone ran out of battery and shut down, so I plugged it into the wall with the moto charger and the red logo came on, but then froze. Usually the battery charge status would come on (before i installed GreyBlur). But now it just gets stuck on the red M logo. If i unplug the phone, remove battery, install back in and turn on the phone without the cable, the phone turns on fine and i can charge it with the wall charger after the phone is booted. But not when the phone is turned off.
anyone knows why?
protip 1# change thread title to relate to the problem you face instead of 'OMGZ LOLZOR HELP MEEEE!!!!' you will get more responses
now for your help
a few things: do you have Tenfers CWM installed? im assuming you do as you are trying to do Greyblur
sounds like to me the phone is bootlooping. my solution would be to start clean with a frsh SBF install as this will be the quickest solution
I changed the title, thanks for the tip
Yes i do have CWM installed.
I have already installed greyblur with no problem as i followed the instructions that were provided in the link above.
There is nothing wrong with the phone as long as it is not plugged in to the charger. It boots just fine and loads greyblur. But as soon as I shut the phone down and plug the charger, it gets stuck on the M logo.
I am kind of a noob and would appreciate it if you tell me what you mean by 'installing a fresh SBF'
thank you
Hey there,
you may want to make sure that you set the system recovery app back to charge mode as this may be causing your error.
^^^ thank you so much. I tried what you said and it worked
glad to help

my phone turns itself on as soon as I plug in the charger

Hello there,
Since the last update OTA (Unofficial Paranoid Android 4.4 rom build by Cr3pT 0308) my phone turns itself on as soon as I plug in the charger.
If I put out with the charger plugged in, it restarts instead of shutting down.
An idea to solve this problem?
thank you
With the 2507 version, no problem.
esteban38112 said:
Hello there,
Since the last update OTA (Unofficial Paranoid Android 4.4 rom build by Cr3pT 0308) my phone turns itself on as soon as I plug in the charger.
If I put out with the charger plugged in, it restarts instead of shutting down.
An idea to solve this problem?
thank you
Click to expand...
Click to collapse
I have same problem. May be it's ROM's error

SM-N910W8 Charger Bootloop issue

Hi there! I have a Canadian Galaxy Note 4 on Eastlink and I am having a bootloop issue where the phone boots up perfectly if the charger is connected. But the moment the charger is unplugged, the phone immediately restarts without warning and keeps bootlooping. I have tried the following:
1. Complete wipe using TWRP and flashing all the stock images from sammobile one by one. No luck.
2. New Battery
3. CM13 official.
No luck. The phone will stay ON forever in download/recovery mode without the charger. But won't boot system until the charger is connected. Anyone have this issue before?

Redmi 2 doesnt turn on until and unless it is connected to a charger.

Hey Guys,
My phone gets stuck in a bootloop if I don't use a charger while turning it on. Actually, doesn't even get past the splash screen and reboots every 1 to 2 seconds. I also need to connect it to the charger to access TWRP. Normally, when I disconnect the charger after the phone has turned on, the phone suddenly turns off. But when I do the same when I'm in TWRP, nothing happens and I can continue using it without any problems. I'll put the logs if you neeed. And yes, I don't need the charger to get into fastboot mode. I'm currently on lineage 15.1 unofficial but the problem persists over other roms too. Please help...
Change the battery
It's the battery , which is under performing with the voltage needed to run the rom process,
That's why you are able to use with charger and got bootloop without charger. In twrp or any recovery mode most of the hardware is disabled and does not need much power.
Telling you with personal experiences
jakir69 said:
It's the battery , which is under performing with the voltage needed to run the rom process,
That's why you are able to use with charger and got bootloop without charger. In twrp or any recovery mode most of the hardware is disabled and does not need much power.
Telling you with personal experiences
Click to expand...
Click to collapse
Thanks!! It worked.. I got my battery replaced and not my phone is as good as new ?

Nexus 6P stuck at bootloop again

So the thing is the phone can not be turned on while not being connected to a charger or USB on PC no matter how long I charge it. The phone bootloops after it is tuned on. I can enter bootloader but not recovery mode. It boots again once I try it.
Quick catch-up:
The battery was once replaced. After some time the phone started to bootloop. I fixed it by unlocking bootloader (by heating up the phone to get past the bootloop) and flashing a stock factory image after that. It worked fine for months until yesterday.
Anyone knows if this can be somehow fixed?

Categories

Resources