SetCpu for the Razr M - Droid RAZR M Q&A, Help & Troubleshooting

guys I am rooted on stock 4.1.2, unlocked bootloader an' all that jazz, i used to use setcpu on nexus s and the old droid milestone, does setcpu work for the razr m? any good working profiles without the reboots and stuff ?

All of the 4.2.2 roms I have tried have a settings option called Performance that lets you set the min/max CPU speeds, switch between different kinds of governors, and play around with RAM management settings.

stesaint said:
All of the 4.2.2 roms I have tried have a settings option called Performance that lets you set the min/max CPU speeds, switch between different kinds of governors, and play around with RAM management settings.
Click to expand...
Click to collapse
i am not on 4.2.2 nor do i intend to go, all i wanna know is that if setcpu is stable for the razr m and what profile should be best for good battery life

I use row or noop for my i/o scheduler and on demand for my governor and setup works I used to use it but I like no frills better
Sent from my XT907 using Tapatalk 2

jafferkhan said:
guys I am rooted on stock 4.1.2, unlocked bootloader an' all that jazz, i used to use setcpu on nexus s and the old droid milestone, does setcpu work for the razr m? any good working profiles without the reboots and stuff ?
Click to expand...
Click to collapse
Just downloaded it and it seems to be working fine. Clocks seem to stick. Will edit this post in a couple of hours to confirm for you
I use ROW I/O with MSM-DCVS governor.

brandon71 said:
I use row or noop for my i/o scheduler and on demand for my governor and setup works I used to use it but I like no frills better
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Man I've no idea what you said, still learning about this... could you tell me what's what ?

ShadowRAZR said:
Just downloaded it and it seems to be working fine. Clocks seem to stick. Will edit this post in a couple of hours to confirm for you
I use ROW I/O with MSM-DCVS governor.
Click to expand...
Click to collapse
Great ill wait for your findings, along with a good profile to help me save some battery on this bad boy too

jafferkhan said:
Great ill wait for your findings, along with a good profile to gdgjp me save some battery on this bad boy too
Click to expand...
Click to collapse
So far the clocks have stuck Meaning once you set a clock its stays there, doesn't reset to default. As for govs and I/O, I use msm-dvcs as my gov and row as my I/O. Msm-dvcs will shut a CPU core down when not needed
Sent from my XT907 using xda premium

That's nice... but shutting down a core... isn't that harmful for the phones life or something? Just asking to increase my knowledge that's all...

jafferkhan said:
That's nice... but shutting down a core... isn't that harmful for the phones life or something? Just asking to increase my knowledge that's all...
Click to expand...
Click to collapse
No, I have never heard of shut a problem. Google it if you are truly worried about it.
Sent from my XT907 using xda premium

Looks like its ok I haven't seen anything that dictates towards it being an issue, so any stable profile you'd suggest for my 907?

jafferkhan said:
Looks like its ok I haven't seen anything that dictates towards it being an issue, so any stable profile you'd suggest for my 907?
Click to expand...
Click to collapse
Unfortunately I don't dabbled in profiles as I personally find them unreliable. I just stick it at a certain clock and set my govs and I/O. If you want to know my configuration, I set my clock to 1350MHz and min to 384. The gov and I/O I've already mentioned.
Here is a link to what each governor does, and what there advantages and disadvantages are. http://forum.xda-developers.com/showthread.php?t=1663809
Sent from my XT907 using xda premium

ShadowRAZR said:
Unfortunately I don't dabbled in profiles as I personally find them unreliable. I just stick it at a certain clock and set my govs and I/O. If you want to know my configuration, I set my clock to 1350MHz and min to 384. The gov and I/O I've already mentioned.
Here is a link to what each governor does, and what there advantages and disadvantages are. http://forum.xda-developers.com/showthread.php?t=1663809
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
thanks bro, that's really informative, i think ill solve that out but once again, battery life with speed is what everyone's after, yes the M has plenty of oomph under the bonnet but clocking it down will save battery yeah?
the profiles you have set are stable enough? no random reboots or lags?

jafferkhan said:
thanks bro, that's really informative, i think ill solve that out but once again, battery life with speed is what everyone's after, yes the M has plenty of oomph under the bonnet but clocking it down will save battery yeah?
the profiles you have set are stable enough? no random reboots or lags?
Click to expand...
Click to collapse
Yes they are stable. Although experiment with the I/O yourself if you find a better one let me know
Sent from my XT907 using xda premium

Related

[Q] Overclocking guide for above 1.2 Ghz

Is there one or as simple trial and error kind of thing?
Thanks
Sent from my NookColor using Tapatalk
SillyRice said:
Is there one or as simple trial and error kind of thing?
Thanks
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Just trial and error. I would start at 1.2ghz on stepping 5 and increase by 50mhz being sure to thoroughly test each clock rate.
Do NOT use the set on boot option until you are sure it is stable.
dalingrin said:
Just trial and error. I would start at 1.2ghz on stepping 5 and increase by 50mhz being sure to thoroughly test each clock rate.
Do NOT use the set on boot option until you are sure it is stable.
Click to expand...
Click to collapse
I ended up testing/benchmarking in 25mhz increments. I know it was a bit more time consuming, but I found that my NC could handle 1275 while using multimedia intensive apps, but a friend could get his up to 1325 running benchmarks and not rebooting.
I think we got in one or two runs at 1350, but it definitely wasn't stable. Broke 4200 in quadrant, for whatever that's worth.
I have it set at 1300 and performance and get 2582 how do you get 4200?
Sent from my NookColor using XDA Premium App
meber said:
I have it set at 1300 and performance and get 2582 how do you get 4200?
Sent from my NookColor using XDA Premium App
Click to expand...
Click to collapse
This was a fresh install with no other background tasks running. All we did was get the CM7 ROM loaded, OC Kernel and gapps.
I'll get some screenshots of his quad scores when he gets back from helping a buddy move. I think we took screenshots of everything 1250+. I might try getting a full reload working and see if I can break that barrier.
I'm running 1325 and the best score I can get is high 3100s.
Can you guys tell me what settings you have under performance menu?
Sent from my NookColor using XDA Premium App
I got similar scores to them and I used the default settings In performance... I think its a matrer of what you have installed and your device. Also don't worry about quadrant scores they are not that important. If your nook runs smooth what does it matter?
Sent from my NookColor using Tapatalk
Each machine will have to be trial and error. Different device..even same hardware are really all different to one degree or another....example...I have 2 nooks..both running the same version of cm..and kernel...my second one never gets past 3200 on quadrant...go figure...same exact software running on both.
I did this test with benchmarks back to back on higher cpu frequencies, and i ended up with 1325 being the highest stable i could go. Very low 3000's for benchmarks in quadrent which dont mean anything of course, but there ya go. Runs like a champ.
Sorry for the ignorant reply...but what will overclocking actually do? I have a NC with a dual boot CM7 SDcard. Didn't do it, bought it from Jonathan on Ebay, works great!

V14 kernel

I started this thread because i want to be able to use Sparksco kernel v14 but it freezes when its set to 1.0GHZ I been running v10 as my daily kernel and its bottomline on my top list of kernels. Any help will be much appreciated, im on the latest nightly CM255, i had to revert back to v10 because i need speed to check emails and surf the internet...If theres another update for the V14 in the future i hope that can be a fix or its probably my setup that prevents me from reaching any higher speeds, overall Sparksco you the man!!! By the way ICS devs yall get mad props peace...
I use sparks v14 kernel on cm nightly 255 clocked right under 1ghz using smartass governer no problem. I did a full wipe of everything, and formatted system before install of everything of course. Edit: I clocked it to 2ghz and no freezes here. Did you do a full wipe before the install of the ROM/kernel?
Sent from my PG06100 using xda premium
Hey sparksco, luv your kernels, can we get smartass2 included?
Sent from my PG06100 using XDA App
Wrong forum buddy. This is a development section.
This belongs in Q&A
Just for future reference.
notsointeresting said:
Wrong forum buddy. This is a development section.
This belongs in Q&A
Just for future reference.
Click to expand...
Click to collapse
I'm notsointeresting in hearing what u got to say but I get the point XDA supervisor...
peanjr said:
I use sparks v14 kernel on cm nightly 255 clocked right under 1ghz using smartass governer no problem. I did a full wipe of everything, and formatted system before install of everything of course. Edit: I clocked it to 2ghz and no freezes here. Did you do a full wipe before the install of the ROM/kernel?
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
I'm going to have to give that a shot homie...
Kernel v14 is more geared for battery saving. I haven't updated the voltages yet because I'm not compiling gingerbread anymore, rather been working on getting a stable ICS rom build before I do more work on it. As soon as we get ICS gingerbread will be a thing of the past. Kernel v14 works good for some and v10 for others. I like v14 because of the battery I've been able to get on 122mhz min and 998mhz max. But if you up the min to the next highest setting (230mhz) you shouldn't get any lockups. Or even try 307mhz.
Edit: looks like 307mhz min is the only clock speed that allows me to overclock to 2ghz and not have any lockups. I'm also on cm nightly 255 pzguzman, and I always keep it on smartass governor.
P.S. The mods should be able to move this thread no problem without removing the comments or thread.
Sent from my PG06100 using xda premium
Yeah, forgot to mention as sparks said, at 2ghz the min is at 307mhz.
Sent from my PG06100 using xda premium
sparksco said:
Kernel v14 is more geared for battery saving. I haven't updated the voltages yet because I'm not compiling gingerbread anymore, rather been working on getting a stable ICS rom build before I do more work on it. As soon as we get ICS gingerbread will be a thing of the past. Kernel v14 works good for some and v10 for others. I like v14 because of the battery I've been able to get on 122mhz min and 998mhz max. But if you up the min to the next highest setting (230mhz) you shouldn't get any lockups. Or even try 307mhz.
Edit: looks like 307mhz min is the only clock speed that allows me to overclock to 2ghz and not have any lockups. I'm also on cm nightly 255 pzguzman, and I always keep it on smartass governor.
P.S. The mods should be able to move this thread no problem without removing the comments or thread.
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
Oh okay i see Sparksco thanks for clarifying the setup, i dont mean to steer anybody in the wrong direction especially from working on a ICS BUILD which is the most highly anticipated OS for android. But im going to flash v14 and try out the setting and will get back and let you know thanx homie...
No luck but its amazing how you guys achieve the speeds... Tried the settings but my phone cant handle the pressure lol...Im gonna stick with this kernel tho... My bad for posting this thread in the wrong section its a rookie mistake...
peanjr said:
Yeah, forgot to mention as sparks said, at 2ghz the min is at 307mhz.
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
It worked i only needed to do a full wipe, thanx homie...
By the way Sparksco i got your setup on my rom, fully functional overclocked at the max with no feezes, thanx homie...
YOU'RE USING THE WRONG GOVERNOR MIN/MAX SETTINGS
For example:
IF I want to get 2ghz out of my phone I use the performance governor and use min/max of 2ghz.
OR:
I would use:
Gov: Smartass
Min CPU: 300mhz
Max CPU: 1.5ghz
You would freeze too if you were a CPU constantly going from 100mhz to 2000mhz all the time!
prguzman1978 said:
By the way Sparksco i got your setup on my my rom, fully functional overclocked at the max with no feezes, thanx homie...
Click to expand...
Click to collapse
Glad you got it working.
Sent from my PG06100 using xda premium
jefftet said:
Hey sparksco, luv your kernels, can we get smartass2 included?
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Smartass2 was made for the HTC Sensation which is a dual core gsm phone much like the Evo 3D (but cdma instead). I could never get it to clock passed 1.4ghz so I don't think it likes our phones much. It's a great concept but the normal old smartass still works much better for the shift.
Sent from my PG06100 using xda premium
FWIW I am hitting 2.0Ghz with no lockups or anything. I previously had been using ScaryStable for a while and anything past 1.6Ghz would lock right up nearly immediately.
danibri82 said:
FWIW I am hitting 2.0Ghz with no lockups or anything. I previously had been using ScaryStable for a while and anything past 1.6Ghz would lock right up nearly immediately.
Click to expand...
Click to collapse
Again, it depends on the governor and the min cpu. I ran scary stable at 1.9ghz for 24 hours+ straight, no lockups.
for the heck of it I ran it @ the min of like 1something hz for the low and 2.0 max just to see how it ran, and it was solid.
danibri82 said:
for the heck of it I ran it @ the min of like 1something hz for the low and 2.0 max just to see how it ran, and it was solid.
Click to expand...
Click to collapse
I understand but say you ran scary at min 100mhz and max 1.9ghz with a gov of ondemand, that would freeze for sure on any phone.
VICODAN said:
I understand but say you ran scary at min 100mhz and max 1.9ghz with a gov of ondemand, that would freeze for sure on any phone.
Click to expand...
Click to collapse
I think what he's saying is that he ran this kernel (pershoot v14) with a low min and a high max and it ran fine.
Sent from my PG06100 using xda premium

Overclock galaxy note

Hello,
Is it possible to overclock and underclock the galaxy note without custom kernel?
I have root but standart kernel.
Thanks for the help
regards
Sent from my GT-N7000 using xda premium
gofwar said:
Hello,
Is it possible to overclock the galaxy note without custom kernel?
I have root but standart kernel.
Thanks for the help
Best regard
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Yes you can use Tegrak Overclock (Ultimate) from the market, works on stock kernels
But be very carefull with your voltages, you are warned!
Do you maybe have good settings for the program?
is it possible to underclock to?
Can i leave the voltage standart and only set the cpu to 1.5 or 1.6
Thank you
Sent from my GT-N7000 using xda premium
gofwar said:
Do you maybe have good settings for the program?
is it possible to underclock to?
Thank you
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
You might want to look in the kernel threads (FM kernel, Abyss, etc) in development, there is enough info concerning your question, and yes you can underclock with tegrak.
With tegrak you can use any cpu speed you want, is not fixed to a few settings.
I don't recommend overclocking
cpt_shawky said:
I don't recommend overclocking
Click to expand...
Click to collapse
I think i wait with overclocking, its fast enough but sometimes its fun to tweak, but its to mutch risk i think, so after i downloaded the app and set it to 1.5, i did set it to default via the app and removed it
Sent from my GT-N7000 using xda premium
One useful thing to do is underclock and undervolt. This phone works perfectl in 1.0ghz with -50 voltage on all clocks and a maximum of 500mnz with screen off, and itll save u a lot of battery.
Sent from my PocketDock
gee2012 said:
Yes you can use Tegrak Overclock (Ultimate) from the market, works on stock kernels
But be very carefull with your voltages, you are warned!
Click to expand...
Click to collapse
I didn't know you could overclock on stock kernal, thanks for that.
I have installed Tegrak and am run at 1.5Ghz from now on. If I notice any issues at all I will report back.
cpt_shawky said:
I don't recommend overclocking
Click to expand...
Click to collapse
Why not?
Sent from my Galaxy Note using xda premium
AdzUK said:
I didn't know you could overclock on stock kernal, thanks for that.
I have installed Tegrak and am run at 1.5Ghz from now on. If I notice any issues at all I will report back.
Click to expand...
Click to collapse
What voltage are you using?
i want to overclock but when i read the message be carefull with the voltage it scared me a bit, dont want to destroy it so fast haha.
is it faster on 1.5 or almost not?
@viamonte: do you mean underclocking the slowest cpu speed when it is in deep sleep?
Sent from my GT-N7000 using xda premium
gofwar said:
What voltage are you using?
i want to overclock but when i read the message be carefull with the voltage it scared me a bit, dont want to destroy it so fast haha.
is it faster on 1.5 or almost not?
@viamonte: do you mean underclocking the slowest cpu speed when it is in deep sleep?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I've not touched the voltage. If my s2 could handle 1.5ghz I'm sure the Note will be just fine.
Why would you want to overclock the fastest phone ever available?
Yuretsz said:
Why would you want to overclock the fastest phone ever available?
Click to expand...
Click to collapse
Why not? Its never fast enough haha.
I have mine now on standart 1.4, when i think its to slow then i wil overclock it to 1.6 or flash a custom rom and overclock it to 1.7.
Does somebody now what the speed is from the gpu?
Sent from my GT-N7000 using xda premium
i've set my cpu to 1.6 and didn't touch the voltages, i left it at 1250mv and 1100mv for core and internal voltages respectively. been on this setting for 2 days now and i haven't had any problems so far. but i was wondering with that cpu frequency is it possible to undervolt?
Yuretsz said:
Why would you want to overclock the fastest phone ever available?
Click to expand...
Click to collapse
Because you can?
Why wouldn't you?
My PC is a 2.66Ghz which has been running at 4.0Ghz since day 1. Like I said, if more power is available at no risk, and absolutely no extra cost, then the question isn't why, the question is WHY NOT?
AdzUK said:
Because you can?
Why wouldn't you?
My PC is a 2.66Ghz which has been running at 4.0Ghz since day 1. Like I said, if more power is available at no risk, and absolutely no extra cost, then the question isn't why, the question is WHY NOT?
Click to expand...
Click to collapse
True! My PC is a Core i7 2600k 3.4GHz which has has been overclocked to 4.7GHz.
Why? Because you can as you said! It's simply to make an insanely fast product run even faster!!

Quadrant scores!!!

Hey guys with all the quadrant scores being posted everywhere, I haven't seen a topic dedicated to these alone. So that's what this thread is for. Here are the rules:
Rule 1: when you post a quadrant please tell everyone what Rom/Kernel you are running so if anyone wishes to follow your steps they may do so.
Rule 2: Please merge your posts if your going to post one after another or simply edit your post and update it to maintain order.
That's it. Thanks guys and here is my quadrant. AOKP 40.1 devil .97 with v6 super charger and kak
Sent from my SCH-I500 using xda premium
It's a freakin' rocket-sled from hell it is!!
Fo realz yo!!!
AOKP 40.1
Devil3 .96
1400 max-200min, 800-200 sleep, no OC\UV
V6 Supercharged 100%, KAK with IO Sched(SIO) tweaks tweaks, 3G turbo
Yeah, it's pretty zippy, I must say!!!!
Azuma73 said:
Fo realz yo!!!
AOKP 40.1
Devil3 .96
1400 max-200min, 800-200 sleep, no OC\UV
V6 Supercharged 100%, KAK with IO Sched(SIO) tweaks tweaks, 3G turbo
Yeah, it's pretty zippy, I must say!!!!
Click to expand...
Click to collapse
Hey azuma how did you get your CPU so high? Also I need you to test something for me. Antutu tels me I'm pulling over 3200 in a quad. But quad pro tells me just over 2600. I'm unsure which to believe
Sent from my SCH-I500 using xda premium
I believe antutu runs more tests than quadrant, therefore showing a higher score, but I could be mistaken?
My phone IS fast and stable, but now I think I need to work on better battery!?
Sent from my SCH-I500 using xda premium
Dim your screen. Go to (I think development) and put a chexk in kill background processes and leave no programs running. I also use toolbox pro to freeze apps that continuously run and use the mobile web version of them.
Sent from my SCH-I500 using xda premium
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
(first screen capture)
old rom: AOKP 40
old kernel: devil .79
old CPU governor: smartassv2
min-max frequency: 200-1400
(second screen capture)
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: conservative
min-max frequency: 100-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
MunkinDrunky said:
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: smartassV2
min-max frequency: 200-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
Click to expand...
Click to collapse
Yeak I got a couple for ya.
Go to settings, Developer settings, then put a check mark in Force GPU Rendering Make sure the Max CPU is 1400 low is 100 Governer I have set to conservative, ZRam is set for 100mb. Try those settings and reboot before you test again
vrahn said:
Go to settings, Developer settings, then put a check mark in Force GPU Rendering Make sure the Max CPU is 1400 low is 100 Governer I have set to conservative, ZRam is set for 100mb. Try those settings and reboot before you test again
Click to expand...
Click to collapse
Ok I believe the Force GPU rendering definitely made the biggest difference. My 2d and 3d scores jumped up. I updated my post. For some reason in the ROM controls it took a couple tries for the new cpu and governor settings to stick after reboot.
5042 on my stock rooted gs3
Motorola Atrix4G
CM7
Oc'd to 1.45
Sent from my MB860 using xda app-developers app
ATRIXXIRTA said:
Motorola Atrix4G
CM7
Oc'd to 1.45
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Nice I/O score!!!
Sent from my SCH-I500 using xda app-developers app
vrahn said:
Nice I/O score!!!
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
Thanks!
Cm7 turns this phone into one of the beastlyiest devices going. Not sure if beastlyiest is a real word, but its a good way to describe the awesomeisity of Cm7.... haha I'm a grammar god!!
Sent from my MB860 using xda app-developers app
MunkinDrunky said:
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
(first screen capture)
old rom: AOKP 40
old kernel: devil .79
old CPU governor: smartassv2
min-max frequency: 200-1400
(second screen capture)
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: conservative
min-max frequency: 100-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
Click to expand...
Click to collapse
MunkyDrunky that still seems a little low considering what everyone else is pulling. Try this as well. And I'll include the files from my phone when I get to my computer with instructions.
Get if not already had toolbox
And go to performance and SD card boost. Change the value to 2480 (I think it is. It will give you a preferred high set)
Go to app manager and freeze any constantly running services that you would normally use such as yahoo mail Facebook etc. And use the mobile web versions to help save ram. I'll include v6, 3G, and a few other files you'll need as well.
After the SD boost and app freeze reboot phone into recovery and wipe cache and dalvik. Then reboot and try your test again.
Sent from my SCH-I500 using xda app-developers app
vrahn said:
Get if not already had toolbox
And go to performance and SD card boost. Change the value to 2480 (I think it is. It will give you a preferred high set)
Click to expand...
Click to collapse
Ok Ive used Rom toolbox when I was using the Gummy rom. Would I still use devil kernel config or manager for the cpu and ram free value changes? How do I make sure the changes will always stick, ive had trouble with that after reboot.
vrahn said:
Go to app manager and freeze any constantly running services that you would normally use such as yahoo mail Facebook etc. And use the mobile web versions to help save ram. I'll include v6, 3G, and a few other files you'll need as well.
After the SD boost and app freeze reboot phone into recovery and wipe cache and dalvik. Then reboot and try your test again.
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
I should say my running apps are usually not many. Right now its Rom Control, Android keyboard, Maps, Nova Launcher, and Rom Toolbox, and Superuser. I test my gps a lot with Maps. Otherwise I dont have a lot running since this isnt my daily use phone. I want it to be again but want to get it flying first.
Thank you for the good advice and help. Trying SD boost now...will try v6 and 3g speed boost later
I use v6 supercharger, sd boost, and app quarantine while at 1300 MHz and I still only get around 1500...I feel like that's pretty low for AOKP MS6 with devil right?
rjkxb2 said:
I use v6 supercharger, sd boost, and app quarantine while at 1300 MHz and I still only get around 1500...I feel like that's pretty low for AOKP MS6 with devil right?
Click to expand...
Click to collapse
i also get very low scores on my fascinate.
What settings are you using with v6
Sent from my SCH-I500 using xda premium
vrahn said:
What settings are you using with v6
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
fix emissions, 3g enhancements, wheel alignment, minfrees: 8,14,55,70,85,100 MB. It says I'm 100% supercharged. I feel like there has been an improvement I'm just thinking I may have missed some setting that would help even more.
my galaxy s3 is just a little better than the fascinate.
Sent from my SCH-R530U using Tapatalk 2
sageDieu said:
View attachment 1195920
my galaxy s3 is just a little better than the fascinate.
Sent from my SCH-R530U using Tapatalk 2
Click to expand...
Click to collapse
I hit 5694 with mine today

[DISCUSSION] ✰✰✰✰✰ DM Kernel ✰✰✰✰✰

[DISCUSSION] ✰✰✰✰✰ DM Kernel ✰✰✰✰✰
Hey Guys,
This is the discussion thread for the DM Kernel.
You can discuss here about the best config's, performance, and any other non-development related queries or topics.
Please feel free to discuss about anything and everything related to Android / Kernels / ROMs... It will be a place where I can gain knowledge from you guys
Based on the discussions, I'll create an FAQ's and Interesting Post's list for everyone's reference.
Thanks to M90 for the idea. :good:
Reserved for FAQ's
Reserved for Interesting/Informative POST's
Reserved for ... Dunno...Lets see...Will use this if needed
I see someones a Batman Fan?
Sent from my GT-I9100 using xda app-developers app
jezus101 said:
I see someones a Batman Fan?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Yes, The DarkKnight is rising again
Hi Dharam,
I'm on Checkrom V7 and wait for a DarkKnight LQ5 Kernel
Do they really stop developing for SG2?
Sent from my GT-I9100 using xda premium
R2D2uC3PO said:
Hi Dharam,
I'm on Checkrom V7 and wait for a DarkKnight LQ5 Kernel
Do they really stop developing for SG2?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I think they really stopped,leomar wrote "no more s2 developing" on CR forum ,so...
can anyone recommend a governor best suited for heavy use? smartassv2 doesn't really handle resource-intensive apps very well.
M90 said:
I think they really stopped,leomar wrote "no more s2 developing" on CR forum ,so...
Click to expand...
Click to collapse
hahaha, everybody knew that. at least dharam have some respect for us.
poppienutshell said:
can anyone recommend a governor best suited for heavy use? smartassv2 doesn't really handle resource-intensive apps very well.
Click to expand...
Click to collapse
PegasusQ mate..
poppienutshell said:
can anyone recommend a governor best suited for heavy use? smartassv2 doesn't really handle resource-intensive apps very well.
Click to expand...
Click to collapse
Try ondemand or pegasusq...
Sent from my GT-I9100 using Tapatalk 2
Hi,
i wanted to thank you for this fantastic Kernel.
Using it ont CM9 RC2.
I'm coming from Siyah, and Fluxi, but your Kernel just blows everything away. Best Battery Life of all.
And with the upcoming fixes, especially BLN, it will be even better! Good Luck with your exams! And keep up this Good work.
Adding some Screenshots of my Battery Stats, and still 30% left(kernel default settings):
Edit: Added 2 new Screenshots, resulting in a Screen-On-Time with 5h 11m. I'm very happy with that.
poppienutshell said:
can anyone recommend a governor best suited for heavy use? smartassv2 doesn't really handle resource-intensive apps very well.
Click to expand...
Click to collapse
with set cpu try to set to 1200 and change it to ondemand
Sent from my Transformer TF101 using Tapatalk 2
speed
Hi i use siyah with miui i want to install asnet and darkknight!
I like to know if darkkn. is for battery saving or / and preformance ?
I like to play gtaIII and other games so preformance and stability is important anny one has exp. or a tip ? tanks
ApuInder said:
Hi i use siyah with miui i want to install asnet and darkknight!
I like to know if darkkn. is for battery saving or / and preformance ?
I like to play gtaIII and other games so preformance and stability is important anny one has exp. or a tip ? tanks
Click to expand...
Click to collapse
First try the default settings. If they are not good for your usage, you can try to overclock to 1200 and to change governor to ondemand or pegasusq..
Inviato dal mio GT-I9100 con Tapatalk 2
This was my first full cycle with DarkKnight v1.9.2, and the SensatioN ROM 3.5. And these are my results.
On the phone i was basically using chrome and whatsapp. I have no widgets on my homescreen and used the default kernel settings without changing anything. Note that i have a different non-samsung battery from "anker" with 1900mAh.
I think these are pretty decent results for the first cycle so keep up the good work
Ill continue to test your kernel, maybe also with different roms like cm9 rc2.
This is another one of my longest screen on time. The uptime is just 7hrs+ tho, I think.
Ondemand & sio
Auto Brightness
200-800mhz
Hey, i can't post in the development section, so i'm asking in this thread:
flashed 1.9.2 today and can't disable the LEDs. if i disable them in the system settings they stay disabled as long as i don't lock the screen. after unlocking they are enabled again. hadn't that problem with 1.8.
cache and dalvik already wiped.
any suggestions?
How do you guys get such great battery with high screen time? I have brightness set to auto. Whenever I have the screen on I can see my battery % drop very quickly.

Categories

Resources