Hi my fellow members.
I know there's been a few different fixes on Youtube. The simplest way i found out was by accident.....
After you remove the back cover.....just unplug the speaker wire while you're listening to something with a sound, then plug it back about half way until you get a sound. That should do it. Remember DO NOT plug the speaker wire all the way back in. Now just use a drop of hot glue or something to keep it in place. I still don't know why if i plug the connector all the way back, the sound will get distorted again. Maybe one of my four wire is shorter than the others, or maybe gotta do with full electric connection. But heck, it worked for me and since my N7 is out of warranty :laugh:
Hope this help some of you that have the same problem as mine.....or a wire connection like mine. Good Luck!!!
Related
Hey all,
I have a mini jack in my car that I plug my phone into for audio when i'm driving. Yesterday, when I unplugged my phone the sound didn't kick back over to the phone. I tried unplugging and re plugging over and over but no dice. If i plug my wired headset in, I can hear the sound/talk as expected. But I'm unable to get any sound to come back through the speakers.
Is there an option that I can tweak to disable the mute? or has anyone else had this sort of issue before?
Thanks in advance
OK Looks like there's a small slide catch inside the mini jack port. I took a thin piece of stiff wire and gave it a good jiggle inside the port while i had a song playing so i could hear if it kicked on and sure enough it did. i guess the mini jack plug i have in my car is maybe a little too big, it's one for my old mp4 player that has a/v.
but oh well i know a fix know,
i took the advice from this thread
http://forum.xda-developers.com/showthread.php?t=262676
So I have an audio out cable in my car, and when I have pandora or slacker radio running it skips half of the song, or my voice dialing starts up and my music stops. Really annoying.
I don't hit anything on the screen, or any buttons... It does it on it's own.
Anyone having this issue?
Anyone have a way for me to fix this?
Mine does the same thing, only reason I won't buy Pandora for more hours. Always tries to do it's 6 allowed skips. I've even had it try and dial someone. Only thing I've found is turn off the screen, don't use blue tooth, and that seems to help...after the 6 skips!
I use slacker and I have not experienced any issues like that. It actually works flawlessly for me unlike the other streaming radio apps that rebuffer constantly.
I have almost everything disabled on my phone except 3g to maximize battery life.
I use Pandora with the radio out cable in my car and I have noticed no issues other than the normal buffer issues I have when driving through areas with low signal strength.
I played Pandora for more than two hrs last night and it worked perfect
my wife and i both have the htc incredible and i know exactly what u guys are talking about. cause my wifes phone does the same thing. but "knock on wood" mine doesnt do it. when we have it plugged into the car jack it does all sorts of strange things. and she had told me about it and i laughed at her and said ohh u just dont know what ur doing. but i saw it for myself this weekend. and so i tried mine and it was fine.. so i dont know if its some setting or app thats causing this issue or its a hardware issue. but if someone knows the answer please let us all know.
What's happening is there are 4 contacts in the headset jack... standard on a phone, but different from a regular mp3 player. Shorting some of the pins together is how the phone works with a headset that has a button in it.
The cable is likely not getting a great connection, maybe its not plugging in all the way or something... Whats happening is that occasionally it is shorting out and then not shorting, which causes it to think someone pushed the button on the cable... Maybe try taking the back cover off and then try it, see if it still happens...
Another thing it could be is if the back cover isn't quite on all the way... the first ring of the cable is attached to the back cover, then from the back cover to the phone through that metal ring in the cover... maybe its a bad connection there... but easiest to test with the back cover off.
Ok, so for an update (a little late i guess)
I called Verizon, and it's covered under my 30 day worry free. I'm going to be getting a brand new phone, so hopefully it doesn't have the same issue.
is there any way to disable the voice dialing, or any type of commands that are sent from that shorting portion of my line-in area? I just don't want to uninstall the voicedialing.apk
Maybe a little more help for you
I was going to mention the same about the cable control connections, but here is somthing else that might help: I noticed that my plug has a rather large outer rubber jacket that is interfered with by the car cradle, a plug with thinner or maybe shave yours down so it does not rub the car cradle hole will help.
Yep, I HAD this problem, then noticed it was doing it while playing mp3 also. Then I noticed whenever I moved the cord it would start acting up. I plugged in my head phones and Pandora/mp3 everything worked so I bought a new audio cord. It now works perfect!
i think you guys are all on the right track with this issue. cause i was in the car for a while this weekend "heading to disney" and i was messing with it some more on my wifes phone and i noticed when i plug her phone into the headphone jack. it shows a icon on the top of her phone as if it was plugged into a headset. and when i plug mine into the same cord it just shows a headphone icon.. but like it said her icon looks like a headphone with a mic on it.. so i think vilord is on the spot. im going to have to go home tonight and try my wifes phone without the back cover on it and see if it works. if it still is messed up then im thinking its just a faulty headphone jack in the phone. but she doesnt want to take her phone back cause she doesnt want to have to reinstall all her stuff on a new phone.
Hi,
So today I was watching a movie in bed and holding my transformer with 1 hand. The bezel (or thing that separates the screen from the sides) suddenly moved up so it was now disconnected from the screen. My headphones had stopped working. I pushed back on the screen/bezel area and it got back into place but now anything connected to the audio jack doesn't work properly. There is no notification that anything is connected another sound comes out of the tablet as well as the headphones. Please help, as I am going on a 12 hour flight in 2 days and really want it for movies.
Thanks
Do the sounds thought speaker still works? Do your headphones still working with other device?
yes and yes
sounds like the spring connector in the headphone socket might have bent, had the same problem but in reverse years ago on an xda exec a little plate that makes a contact when the headphones are inserted got jammed in the open headphone position so no phone speaker. Yours sounds as if the contact might have bent when your bezel loosened and is not making the contact when inserted. Looks like an Asus job. The contact is doglegged so that when the jack is in it closes the contact, if yours/has bent straight when the jack is in it still won't contact.
But then again could be wrong.
maybe clean ?
ilan354 said:
Hi,
So today I was watching a movie in bed and holding my transformer with 1 hand. The bezel (or thing that separates the screen from the sides) suddenly moved up so it was now disconnected from the screen. My headphones had stopped working. I pushed back on the screen/bezel area and it got back into place but now anything connected to the audio jack doesn't work properly. There is no notification that anything is connected another sound comes out of the tablet as well as the headphones. Please help, as I am going on a 12 hour flight in 2 days and really want it for movies.
Thanks
Click to expand...
Click to collapse
This happened to me too. After I mod my tablet to add 2.5mm barrel plug charger my speakers stopped and the audio jack worked in only one side. Then a few hours later after I pressed on the bezel in the same place as you the audio jack did not work in either side. I read about reboot the tablet to reset audio and tried but it did not work for me. I opened my tablet and unplugged my speakers from the board and the audio jack now works 100%. I have replacement speakers, so I will soon be reinstalling and testing the original speakers and my replacements and maybe get to the bottom of this problem.
So maybe a tablet reboot (off and on) will do same for you without opening. Maybe there is another trick to reset the audio, but I do not know. It may be something else, but I do not know. Good luck.
If you want to open and unplug & plug speakers you need a torq #5 to open the two screws. Put thumbs on screen and finger nails over edge and under bezel lip and push/pull gently - starting a one of the top corners. If you get hung try wiggling a small plastic tool under edge and try again, carefully. The speaker plug on mobo is small white socket mounted on board in bottom left. Careful to not void warranty.
Thanks
Thanks everyone for your replys but I have a couple other irreparable problems so I'm sending it back to amazon
Hello people,
I've finally had enough with the headphone problems many have reported, the distorted sound and triggering voice commands. I've previously swapped the jack with a new one(had to buy a whole mid frame) and now it's started doing it again, about a month later(the original one lasted just as long).
The issue is that this phone is huge and when using it in my pocket with the headphones on, it moves that jack with every step. This wouldn't be a problem if the jack was soldered on or at least wired to the board, but instead it's just placed on top.
So I've decided I want to solder it on. I'm a bit scared as I've never soldered to a pcb board... And I might desolder other items. I'm going to hone my skills first on some other broken devices, but at this point I'm pretty sure I'll do it in the end.
Has anyone else here done this? Want to watch me possibly destroy this otherwise great phone? Heh.
Ty
Dude you're nuts. Just go get some Bluetooth headphones, it's 2016!! I literally haven't used my headphone jack more than 3-4 times in the 4 months I've owned this phone.
Also, I'm pretty sure the headphone jack isn't soldered in specifically so that if the jack moves around a little it won't cause damage to the board. This is common on most/all phones. Soldering it down would be a TERRIBLE idea. You will likely damage your phone.
Why didn't you just send it in for warranty repair?
Sean89us said:
Dude you're nuts. Just go get some Bluetooth headphones, it's 2016!! I literally haven't used my headphone jack more than 3-4 times in the 4 months I've owned this phone.
Also, I'm pretty sure the headphone jack isn't soldered in specifically so that if the jack moves around a little it won't cause damage to the board. This is common on most/all phones. Soldering it down would be a TERRIBLE idea. You will likely damage your phone.
Why didn't you just send it in for warranty repair?
Click to expand...
Click to collapse
Hi, I couldn't send it in because I unlocked it, which voided the manufacturer warranty. If I remember correctly on my old galaxy s4 it was plugged in with a cable, which was a much better solution. The reason my sound interrupts is because when it moves, it moves the pins on the board causing slight interruptions.
However the pins in the jack are long enough and soft enough that they would bend first instead of breaking the board.
And about Bluetooth headphones? I've bought 3 different sets, they either have huge controllers hanging and pulling on one side, or they are too big, or they're poor quality, I've spent more than I want to admit on different sets (see attachment).
So today I'm going to try and solder the jack, and throw this phone away if I break it and buy a small one, that doesn't put that much pressure on the jack in my pocket.
Stay tuned. I should take pictures.
No go
Well, it didn't work. I knew it would be hard to solder the little legs that where under the actual jack. Getting them all melted and touching before they cool down, without melting the plastic or the rubber around the jack was not possible in the end.
Only 2 of the 5 pads actually stuck together, and there was only a buzz coming from the headphones. I decided to open it again and remove the solder just in case something was shorted, I didn't want the sound chip to get toasted. My biggest mistake was leaving the glue on the jack, which stuck to the mid-frame. When I pulled that apart, the jack, with the two pads came with it.
I'm putting the pictures up if anyone wants to have a look at the mess, you can see in the first and second picture why my sound is interrupting: the pad is damaged from continuous friction.
The phone still works so I've lost nothing other than my time.
BTW, at the moment I'm using wired headphones to a Bluetooth adapter. Until they make smaller/lighter wireless headphones I'm stuck with this.
They got Bluetooth without the wire hanging thing that bugs ya (bugs me too) don't have a name or link right now but a quick Google search should pull them up
Ken C said:
They got Bluetooth without the wire hanging thing that bugs ya (bugs me too) don't have a name or link right now but a quick Google search should pull them up
Click to expand...
Click to collapse
Yea, I saw Jordan Keyes review these ones. They are too much like having screws screwed in your ears. If they can get them smaller, and still have 2-3 hours battery, I'll be interested.
I am not sure how the LG Tone type of Bluetooth ear buds are any more intrusive than regular earbuds with a cord hanging down the side of your body! They definitely last a long time for me.
bv90andy said:
Yea, I saw Jordan Keyes review these ones. They are too much like having screws screwed in your ears. If they can get them smaller, and still have 2-3 hours battery, I'll be interested.
Click to expand...
Click to collapse
How about these
Use this instead, it's a taotronics tt-br05 Bluetooth wireless receiver, you can plug your wired headphones in it and use Bluetooth instead of the 3.5mm plug.
Has play/pause and volume/track change buttons. Also has a mic for calls.
Search in Amazon.
Ken C said:
How about these View attachment 3865297
Click to expand...
Click to collapse
They only have 1 hour battery before you have to plug them in the little tube to charge again. The battery technology isn't there yet.
kadopt said:
Use this instead, it's a taotronics tt-br05 Bluetooth wireless receiver, you can plug your wired headphones in it and use Bluetooth instead of the 3.5mm plug.
Has play/pause and volume/track change buttons. Also has a mic for calls.
Search in Amazon.
Click to expand...
Click to collapse
I have actually been using this
Good option, but it wasn't great sound quality.
Anyway, I've bought a second hand Xperia z5 compact and use that now. The moto x style has become a in house tablet.
Doesn't matter what I connect, it doesn't feel like it's every inserted completely and because of it I've been getting really irritated when the music stops.. Can I replace it and keep the same audio quality?
Or should I wait to trade it in?
Are you 100% sure that there is nothing stuck inside the port that is blocking a secure connection? Could be something pretty tiny even as it wouldn't take much to prevent the plug from clicking in completely
Yup, mine is the same. H918. I just take a little piece of the rubber off the plug in part and haven't had any problems since.
i faced this with my g3, if the headphones do not have a mic its a 2 connector and idk why but it makes teh phone think u hit the answer/call/play/pause button, just get a headset with a mic, problem soft or get bluetooth and dont sweat it at all
pre4speed said:
Yup, mine is the same. H918. I just take a little piece of the rubber off the plug in part and haven't had any problems since.
Click to expand...
Click to collapse
I'll try that, thanks
Pocket lint has done this to me several times. I put a little hook on a tooth pick and reached in. Every time I think no possible way, that's what it is.
You can also pull the cotton off a q tip and twist in there.
Sent from my LG-H918 using XDA-Developers Legacy app
yup. my v20 started this with my car aux cable. activates google now constantly, stops music, any slight bump of the 3.5mm jack and im jacked.
Took phone apart cleaned with denatured alcohol and still the issue. The port is cheap and the connectors are not sufficently making contact with the aux end. Its a sh!tty quality part LG dumped on the phone so our quad dac experience would suck.. Just poor manufacturing is the issue imo
I have the same issue whenever I use a headset or plug without mic/buttons; Google Now keeps activating unless I position the cable just right, and it is extremely annoying. I also checked the circuit board when fixing my SD Card slot and noticed that the headphone jack is soldered on, so I wouldn't mess with that unless you have a lot of soldering experience under your belt.