Hello people,
I've finally had enough with the headphone problems many have reported, the distorted sound and triggering voice commands. I've previously swapped the jack with a new one(had to buy a whole mid frame) and now it's started doing it again, about a month later(the original one lasted just as long).
The issue is that this phone is huge and when using it in my pocket with the headphones on, it moves that jack with every step. This wouldn't be a problem if the jack was soldered on or at least wired to the board, but instead it's just placed on top.
So I've decided I want to solder it on. I'm a bit scared as I've never soldered to a pcb board... And I might desolder other items. I'm going to hone my skills first on some other broken devices, but at this point I'm pretty sure I'll do it in the end.
Has anyone else here done this? Want to watch me possibly destroy this otherwise great phone? Heh.
Ty
Dude you're nuts. Just go get some Bluetooth headphones, it's 2016!! I literally haven't used my headphone jack more than 3-4 times in the 4 months I've owned this phone.
Also, I'm pretty sure the headphone jack isn't soldered in specifically so that if the jack moves around a little it won't cause damage to the board. This is common on most/all phones. Soldering it down would be a TERRIBLE idea. You will likely damage your phone.
Why didn't you just send it in for warranty repair?
Sean89us said:
Dude you're nuts. Just go get some Bluetooth headphones, it's 2016!! I literally haven't used my headphone jack more than 3-4 times in the 4 months I've owned this phone.
Also, I'm pretty sure the headphone jack isn't soldered in specifically so that if the jack moves around a little it won't cause damage to the board. This is common on most/all phones. Soldering it down would be a TERRIBLE idea. You will likely damage your phone.
Why didn't you just send it in for warranty repair?
Click to expand...
Click to collapse
Hi, I couldn't send it in because I unlocked it, which voided the manufacturer warranty. If I remember correctly on my old galaxy s4 it was plugged in with a cable, which was a much better solution. The reason my sound interrupts is because when it moves, it moves the pins on the board causing slight interruptions.
However the pins in the jack are long enough and soft enough that they would bend first instead of breaking the board.
And about Bluetooth headphones? I've bought 3 different sets, they either have huge controllers hanging and pulling on one side, or they are too big, or they're poor quality, I've spent more than I want to admit on different sets (see attachment).
So today I'm going to try and solder the jack, and throw this phone away if I break it and buy a small one, that doesn't put that much pressure on the jack in my pocket.
Stay tuned. I should take pictures.
No go
Well, it didn't work. I knew it would be hard to solder the little legs that where under the actual jack. Getting them all melted and touching before they cool down, without melting the plastic or the rubber around the jack was not possible in the end.
Only 2 of the 5 pads actually stuck together, and there was only a buzz coming from the headphones. I decided to open it again and remove the solder just in case something was shorted, I didn't want the sound chip to get toasted. My biggest mistake was leaving the glue on the jack, which stuck to the mid-frame. When I pulled that apart, the jack, with the two pads came with it.
I'm putting the pictures up if anyone wants to have a look at the mess, you can see in the first and second picture why my sound is interrupting: the pad is damaged from continuous friction.
The phone still works so I've lost nothing other than my time.
BTW, at the moment I'm using wired headphones to a Bluetooth adapter. Until they make smaller/lighter wireless headphones I'm stuck with this.
They got Bluetooth without the wire hanging thing that bugs ya (bugs me too) don't have a name or link right now but a quick Google search should pull them up
Ken C said:
They got Bluetooth without the wire hanging thing that bugs ya (bugs me too) don't have a name or link right now but a quick Google search should pull them up
Click to expand...
Click to collapse
Yea, I saw Jordan Keyes review these ones. They are too much like having screws screwed in your ears. If they can get them smaller, and still have 2-3 hours battery, I'll be interested.
I am not sure how the LG Tone type of Bluetooth ear buds are any more intrusive than regular earbuds with a cord hanging down the side of your body! They definitely last a long time for me.
bv90andy said:
Yea, I saw Jordan Keyes review these ones. They are too much like having screws screwed in your ears. If they can get them smaller, and still have 2-3 hours battery, I'll be interested.
Click to expand...
Click to collapse
How about these
Use this instead, it's a taotronics tt-br05 Bluetooth wireless receiver, you can plug your wired headphones in it and use Bluetooth instead of the 3.5mm plug.
Has play/pause and volume/track change buttons. Also has a mic for calls.
Search in Amazon.
Ken C said:
How about these View attachment 3865297
Click to expand...
Click to collapse
They only have 1 hour battery before you have to plug them in the little tube to charge again. The battery technology isn't there yet.
kadopt said:
Use this instead, it's a taotronics tt-br05 Bluetooth wireless receiver, you can plug your wired headphones in it and use Bluetooth instead of the 3.5mm plug.
Has play/pause and volume/track change buttons. Also has a mic for calls.
Search in Amazon.
Click to expand...
Click to collapse
I have actually been using this
Good option, but it wasn't great sound quality.
Anyway, I've bought a second hand Xperia z5 compact and use that now. The moto x style has become a in house tablet.
Related
I've tried this in 2 XDA II's. I put my headphones it one and it works but you cant hear it and you have to hit the cap around a little for it to get sound for a slip second. I put my headphones in another XDA II and it works fine.. So obviously there is something wrong with this XDA II's headphone jack. The rubber cover to the headphone jack is missing, would this have any effect on it?
EDIT-
When I put it in the broken headphone jacked PDA when I insert the headphones in it makes a crinkle noise from me pushing it in. The other XDA II goes in smoothly. =/
Hi.
Rubber cap doesn't change anything (apart from stopping rubbish from getting into connector )
What you described is a case of worn out connector (in PDA).
It happens sometimes. Jack type connector aren't so tough, especially when you plug in and out often.
If you dismantle Blueangel, you'll have clear view of connector body soldered to PDA's mainboard.
You can do it. You can let somebody do it. Or You can leave it to professionals.
The connector needs to be replaced (very cheap part).
Maybe it's enough to bend metal terminals inside a little. A person who does hardware will know.
There's a optimistic version though.
Maybe only cleaning the terminals would do for you (I doubt it though).
It can be done without opening BA.
I'd recommend using some special spray (for cleaning electrical contact metals). Ask in electronic parts shop.
Good luck.
I ment my XDA II, not XDA IIs, lol. I have no expierence with opening the phone but I am good with electronics, but I don't know exactly what I'm looking for =/. I think I might just buy the HT820's Bluetooth headset, that would solve my problem overall.
Faulty socket repair...
Hey guys,
I have the same problem as above (crackling sound through headset) and the O2 service centre said it would cost £97 to fix.
But just did a web search and found a small company in London that said they can fix it (within 2 hours!!!!) for only £30!!!!
Im off to get it sorted so I'll let you know how it all went!!!
Richie Rich.
Mine wasn't like this until I bought it. I bought it from a friend for only $100USD because I'm very good friends with him, it works fine perfectly but the only problem is the headphones don't work in it (any headphones) and he knows there is something wrong with the jack, it wasn't like this until recently it happened. It's cheap to fix probably... but I'd rather just buy the HT820 bluetooth headset, its a good replacement instead of having to send in the PDA to fix a little headphone jack port I wont be ever using sooner or later.
but hey if that place fixes your phone, reply to this topic I want to know!
Headset Jack
I had this exact same problem in the past.
The headset would crack and go out every once in a while, sometimes I would have to move it around in order to get any sound at all.
I didn't do anything about it until it completely broke off, yes the inside plastic connected to the motherboard broke...
So I went to open it up, its not that hard, just a few screws, but I had to buy a torax screw driver (not that expensive)
I was also a bit shy about opening it, but I found this post:
http://forum.xda-developers.com/viewtopic.php?t=8525&highlight=opening+himilaya
you wont have to open it all the way up... just pulling the back cover off, then you will see the headset jack,
If it isn't broken or cracked then your solution would just be to take the metal connectors and a flathead screwdriver, and bend them,
Don’t bend the metal connectors too much so you can’t put a headset in, but just enough where there is definite connection around the headset,
You might want to put a headset in and see the dimensions before you close it (to save you from opening it up again)
You might want to clean the metal if it is dirty, ether with a dab of eyeglass cleaner on a soft cloth (eyeglass cleaner works well with electronics, due to the alcohol that evaporates)
Although if the metal is encrusted or rusty, you might want to take a small strip of sandpaper, or some abrasive object, but don’t rub too hard or you'll take them off!
Don’t worry too much about opening your device up; it is not hard, just open it with caution.
Good luck!
imablackhat, hi, did u mean that ht820 can output sound from media player & every sound from xda2? my current BT is bluetrek G2 and as far as i'm using it for talking only. how many hours the batt can last if we continously hear musics?
its 17 hours of music, www.expansys.com, search HT820, its the headset. I'm considering buying it for cheaper on eBay.
Is the 2.5mm jack funky for anyone else? When I have headphones or ext. speakers plugged in, slight movements will cause the connection to be lost -- I have to rotate the plug around to restore, and then hold the phone still. (Any fix other than new handset?) Thanks.
You are using the wrong size. 2.5 is too small. You should get a 3.5 and it should fit fine.
Sorry, I must be confused about the size (it's a 3.5mm jack?). I am indeed using the right sized plugs for the jack -- standard headphone/speaker plugs.
pavvy said:
Is the 2.5mm jack funky for anyone else? When I have headphones or ext. speakers plugged in, slight movements will cause the connection to be lost -- I have to rotate the plug around to restore, and then hold the phone still. (Any fix other than new handset?) Thanks.
Click to expand...
Click to collapse
Sounds like a bad jack. Loose joints, etc can cause that. Try another headphone or speaker plug. If the same happens, you have a bad jack.
androidmonkey said:
Sounds like a bad jack. Loose joints, etc can cause that. Try another headphone or speaker plug. If the same happens, you have a bad jack.
Click to expand...
Click to collapse
Yes, thanks -- it happens with headphones and speakers that have been fine with other devices (even happens w/the Samsung-provided set of headphones).
Bummer, but I may just have to live with it; I'd hate to trade this phone in for a refurb (for something so relatively minor)...
I had an issue where after about 30 minutes of playing music the phone would randomly think that signals were being send by whatever was plugged into the jack to pause/skip, etc. This would happen whether I was using the stock ear pieces or other headphones or had it plugged into my car's stereo.
I ended up exchanging the device to resolve the problem.
Mine has the same problem, so apparently it's not incredibly uncommon. Luckily I literally never use headphones with my phone, or anything that requires the 3.5 jack honestly so it's a non-issue.
RadAway said:
I had an issue where after about 30 minutes of playing music the phone would randomly think that signals were being send by whatever was plugged into the jack to pause/skip, etc.
Click to expand...
Click to collapse
Interesting, that happens on mine as well (I actually thought the random pausing may be a "feature" -- like for when the headphones become accidentally unplugged!).
Make sure your hedphones/speakers plug fits snuggly into the jack. I had an "issue" when I thought I had a bad jack, but I just wasn't plugging the headphones all the way in, looked like a jackass when I claimed a warranty replacement, and took the TMO skin off the phone for the last time before shipping my "defective" phone, just to try it one more time, saw that the plug didn't go all the way in, pushed it a bit harder and it clicked into place LOL
lqaddict said:
Make sure your hedphones/speakers plug fits snuggly into the jack. I had an "issue" when I thought I had a bad jack, but I just wasn't plugging the headphones all the way in, looked like a jackass when I claimed a warranty replacement, and took the TMO skin off the phone for the last time before shipping my "defective" phone, just to try it one more time, saw that the plug didn't go all the way in, pushed it a bit harder and it clicked into place LOL
Click to expand...
Click to collapse
I'll admit to thinking the same lol
Thanks, that is good advice (same thing happened to me once with an ipod nano -- case prevented a plug from going in all the way!) -- but in this instance, my case doesn't cover the top edge of the phone, so the jack is free & clear...
I have been searching for this problem, but can't find anything about it.
Theres a problem with my Galaxy Note headphones. Every time i plug them in the Note, the audio is really bad, kinda like it only sends half of the music out, and I can normally only hear the music, and then the voice in the song is really really low.
But when I press the button on the headphones it works completely like it should, but I have to keep pressing the button. So if i stop pressing it, the audio gets really bad again.
Does it have anything to do, that I jailbreaked the phone with the Abyssnote kernel?
Did they worked properly before you flashed the kernel?
Maybe the headphones are just broken?
That's what I can't remember
Is there a way to reinstall the stock kernel?
Sorry for being a newbie..
Have you tried other headphones to see if its the Note or the headphones?
Your headphones are broken.
Sent from my GT-N7000 using Tapatalk
This has happened to me several times now. Pushing the jack harder and/or rotating it helps in my case.
Probably broken plug. Unfortunately many samsung's heaphones arrive broken...
Sounds like the pin alignment is in the wrong. What brand headphones and what were the made for? Try other headphones. I have a set of Nokia headphones that don't work on an iPhone or the note but work great on my Booklet netbook. Just saying, headphones with mics are not universal.
I own 20 nokia headphones. All had this issue.
normally i only get this issue when i havent pushed the plug all the way into the socket.
Same Issue w/AT&T Version
I purchased two G Note's back in March, and I am just now finding out four days ago that both devices will not allow the Headphone jack to completely be inserted into the port at the top of the phone. When inserted, although not properly seated all the way inside the device, you can hear sound in one side, and if you apply pressure downward you can hear both sides. I told AT&T I don't care that you have not heard of this problem, and what are you going to do about it. After taking my devices to two AT&T Retail Stores and a Best Buy, which is an Authorized Retailer, they all told me I may have defective devices. After being on the phone with AT&T CS Rep, 73 minutes the Rep comes back and says her Supervisor said it's not a warranty issues and not to replace me devices. I said let me talk to the buffon. Guess what, he/she never came to the phone to talk with me, so the CS Rep said she was going to put the Warranty Replacements through anyway. I have tried Samsung, Sony, and Philips Headphones, all of which are 3.5mm and a male-to-male audio jack to listen to my music in my car and this is when I discovered the problem. When at AT&T and Best Buy my Headphones fit into their display models without any problems, and so with their own Headphones. But when AT&T and Best Buy tried THEIR Headphones they would not fit into my phones. So at the moment, I am waiting on my replacement devices and hopefully those will be ok.
So I don't believe it has anything to do with your jailbroken phone or a kernel issue.
Do the headphones work?
I suggest you try to use the headphones with someother device. MP3player, desktop, TV.
See if they work OK with those.
I also suggest you try a different set of headphones with the Note and see if those work.
AW: Problem with the Note and it's headphones
Delete
I'm going to go way outside the normal thought process. Do you ever carry your phone in your jeans pocket? I've actually experienced a couple times where the lint in my pockets got into the headphone jack hole and it would do what has been described in previous posts about the jack not seating properly. Forcing the jack in, only compacted things further. I ended up spending a while with a needle and bent paperclip to get the stuff out. Get a good light and look inside. Maybe even compare what you see to another devise with a headphone jack. Good luck.
Sent from my GT-N7000 using xda app-developers app
unglued94ta said:
I'm going to go way outside the normal thought process. Do you ever carry your phone in your jeans pocket? I've actually experienced a couple times where the lint in my pockets got into the headphone jack hole and it would do what has been described in previous posts about the jack not seating properly. Forcing the jack in, only compacted things further. I ended up spending a while with a needle and bent paperclip to get the stuff out. Get a good light and look inside. Maybe even compare what you see to another devise with a headphone jack. Good luck.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
This is true. I got one of those cheep screen pens with a rubber tip as it has a plastic thing to hold it in the Jack hole by athread. I use the plastic bit to plug the hole to stop lint & moisture
From box 13......
Never happened to me and i am still loving the out of the box headphones. Maybe urs broken..
Sent from my GT-N7000 using xda app-developers app
had the same problem here:
It started with the same symptoms as you described, then (as a guy mentioned) I could make it working by turning the jack a little around when plugged in.
then Iost the left channel, then it stopped working.
went to the service: they replaced the whole input part (the internal audio in/out hardware) which sits right behind the 3,5 mm "headphone out".
Then it worked. However, I was curious to find out what had caused the malfunction. So I gave it to a Chinese friend (he has a repair shop for phones).
He found out that by plugging in "non compatible" head sets (probably my old Nokia one), which do have different sections at that pin for the remote control, I caused a short circuit to the audio hardware. We could simulate this on his computer, where he has a simulation software to control the current flow caused by head sets. So, If it is not your ROM (you said you are not on Stock) , you will have to replace your audio in/out at your service center.
hope this helps
greetings from Sichuan China
Does anyone has this problem? Recently I started losing signal in my left ear piece of my headphones when listening to music on my Nexus 4. When I wiggle the headphone jack around (which I can, quite loosely) I can get it to work again bit the slightest misallignment is enough to mess up the audio again. Tested with various headphones, all the same problem. My HTC Legend had the exact same problem, but only after about 2 years of usage...
Anyone seen this problem before? Or any solutions on how to fix it? Thabks.
Sounds like you pushed on the headphone connection too hard at some point and cracked the plastic. It should be a very tight fit without no room for wiggling. I suppose you could stick something into the headphone port to make it smaller so that the headphone jack will touch the connection pins, but it's going to be very difficult to find the optimum thickness.
snapper.fishes said:
Sounds like you pushed on the headphone connection too hard at some port and cracked something. It should be a very tight fit without no room for wiggling. I suppose you could stick something into the headphone port to make it smaller so that the headphone jack will touch the connection pins, but it's going to be very difficult to find the optimum thickness.
Click to expand...
Click to collapse
Then my headset might be the culprit for that... Damn you, Sennheiser and your thick jacks!
Ok, sucks :/ That means a trip to Germany and back to try and get it repaired under warranty...
what Sennheiser headphones do you have?, my new ones are small with a right angle so it won't damage/strain the connection when in your pocket.
my old ones were terrible, i damaged the cord and connection on my previous phone and looking at the nexus4 it looks weaker.
republicano said:
what Sennheiser headphones do you have?, my new ones are small with a right angle so it won't damage/strain the connection when in your pocket.
my old ones were terrible, i damaged the cord and connection on my previous phone and looking at the nexus4 it looks weaker.
Click to expand...
Click to collapse
HD215
Doesn't matter what I connect, it doesn't feel like it's every inserted completely and because of it I've been getting really irritated when the music stops.. Can I replace it and keep the same audio quality?
Or should I wait to trade it in?
Are you 100% sure that there is nothing stuck inside the port that is blocking a secure connection? Could be something pretty tiny even as it wouldn't take much to prevent the plug from clicking in completely
Yup, mine is the same. H918. I just take a little piece of the rubber off the plug in part and haven't had any problems since.
i faced this with my g3, if the headphones do not have a mic its a 2 connector and idk why but it makes teh phone think u hit the answer/call/play/pause button, just get a headset with a mic, problem soft or get bluetooth and dont sweat it at all
pre4speed said:
Yup, mine is the same. H918. I just take a little piece of the rubber off the plug in part and haven't had any problems since.
Click to expand...
Click to collapse
I'll try that, thanks
Pocket lint has done this to me several times. I put a little hook on a tooth pick and reached in. Every time I think no possible way, that's what it is.
You can also pull the cotton off a q tip and twist in there.
Sent from my LG-H918 using XDA-Developers Legacy app
yup. my v20 started this with my car aux cable. activates google now constantly, stops music, any slight bump of the 3.5mm jack and im jacked.
Took phone apart cleaned with denatured alcohol and still the issue. The port is cheap and the connectors are not sufficently making contact with the aux end. Its a sh!tty quality part LG dumped on the phone so our quad dac experience would suck.. Just poor manufacturing is the issue imo
I have the same issue whenever I use a headset or plug without mic/buttons; Google Now keeps activating unless I position the cable just right, and it is extremely annoying. I also checked the circuit board when fixing my SD Card slot and noticed that the headphone jack is soldered on, so I wouldn't mess with that unless you have a lot of soldering experience under your belt.