Database Users

IPL or SPL 3.08 failed formatting the partition RECOVERY

I am a great FAN of this section as I have flashed almost every WM6 or WM6.1 ROM into my charmer....
But the problem came the last month when I had a fialed Flashing of the ROM resulting in the hanging problem at the T-mobile Boot screen with IPL 3.08 and SPL 3.08!!!
As I have read almost every thread and discovered that a lot of others are facing the same problem wthout any satisfactory solution.....(Reason: on hard reset it says formatting failed!!!)
Infact the only story of recovery was from dorfdisko
dorfdisko said:
____________________________________________________________________
Hey!!! MYY CHARMER IS BACK TO LIVE <3
I thank all guys, who supported mee.. thank you very much!!
hey, now my battery is full charged an the ruu starts patching but at 95% ist says:
This NBF File cannot be used for your PDA Phone. Please check NBF File.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i used this one:
RUU_Prophet_220734_2207114_024721_NVID
i tried also:
Prophet_G3_G4_RadioRom_v2.69.21
RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship
but no succeed
what should i try now?
____________________________________________________________________
Hey!!! MYY CHARMER IS BACK TO LIVE <3
I thank all guys, who supported mee.. thank you very much!!
Click to expand...
Click to collapse
But for me I could not get through this grim situation with the same result shown above error at 95%......
So I would like to request all the developers (especially dorfdisko the only lucky person coming out of this situation using the PROPHET ROM in someway!) to look into the matter systematically and develope some solution in the form of specially cooked ROM or something like this!!!
Thanks in anticipation on my behalh and others who are caught up in similar situation!!!

Have you tried http://forum.xda-developers.com/showthread.php?t=471490 ?
You can also try to flash the latest German ROM. (I do that with the English one when something fails.)
That may only work with the NoID RUU from the link above. It can work because the IPL and SPL of a German ROM have got other extended code numbers also they are the same version. They will overwrite the old ones and maybe that works.
I can upload the nk.nbf later for you.

Yes please!
It would be an aweful kind of you!!!

Here is the needed German nk.nbf. Use only with NoID RUU!
http://rapidshare.com/files/217609597/nk.nbf
Hope this works for you.

Has my idea worked? We need feedback because maybe we can help much peolpe with this solution.
So please tell me what happend.

ChrBeck said:
Has my idea worked? We need feedback because maybe we can help much peolpe with this solution.
So please tell me what happend.
Click to expand...
Click to collapse
Sorry I was busy somewhere else so could not found time for testing this procedure!!!
Would tell you soon about the said matter!!!

Thanks for that
EDIT
I've seen that you opened a thread before and I replied there too. Not very nice to open a new one. And next time tell us that you opened a thread before. That will help us much.
Thanks
END OF EDIT

Sorry for that issue!!!
And as regards your ROM file it didnt work either.
As the phone hangs again on the splash screen and on hard resetting it says format failed as ususal!!!
Now what can be done?

You may can't flash the File with the NoID ruu because your device isn't CDI unlocked. I'll search and maybe tell you things later.

The file was flased to the end but then that was the result as I described above!
Anyway thanks for your painstaking!!!

Yes. It looks like flashed to the end. But the bootloader rejects everything and nothing will change. You can only flash with the original Utility with fitting code. Nothing else. Believe me it got never flashed.
And I've got an other idea:
You can format the Charmer over TTY. But I don't know about funktion in bootloader mode. And I would not recomend you to try it on your own. Maybe Vlodeck reads the thread. He should know more about it. Otherwise I can ask in Wizard forum for you.

OK I have a idea now. You can try with MTTY and I can tell you how.
First you need MTTY: http://wiki.xda-developers.com/uploads/mtty.exe
You need to have a full battery. (Otherwise you can power your phone with a AC adaptor with 3 4.5 or 5 volt. I can tell you the pin layout)
Put your device in bootloader mode (Press Camera while reseting).
Connect it to USB.
Start MTTY and choose USB.
Wait untill it is connected to the phone.
First type in task 32 and hit enter....Wait for feedback.
Then type task 28 and hit enter....Wait for feedback.
Now start a original ROM upgrade and let it run till the end.
Warning: Never restart your phone untill the Flashing is finished. Restarting the phone will kill your device completly.
If there are errors with the comands, for example Invalid comand please write me. I'll tell you what to do then.

i have the same problem with ipl & spl 3.08
this last solution doesn`t work.
do you have another idea?

What feedback do you get after you typed the comands?

this one:
32
Invalid command : 32
For a help screen, use command ? or h
Cmd>28
Invalid command : 28
For a help screen, use command ? or h

OK. That was clear. The comands won't work in Cmd> Mode. You need to get in USB> Mode. But I don't know how to do that so I can't do anything at the moment.

adrianoND said:
this one:
32
Invalid command : 32
For a help screen, use command ? or h
Cmd>28
Invalid command : 28
For a help screen, use command ? or h
Click to expand...
Click to collapse
Command wrong, need >set 32< and format all or format EXTROM, but you need Gold Card created QMAT programm and worked WM Phone to create GoldCard.

[FIX] for Nand USB Init Failed

Hello Guys/Girls,
As I was struggling with this I though I would share the info to help people get NAND Android installed.
Firstly if you are getting the below message you are most likely missing a couple of file's in the same directory called EnterBootloader and rapitool (which I have included in this post)
"Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)"
Simply place those file in the same Directory as the DAF.exe file and vola it should now start the flashing from the DAF.exe file.
I hope this helps.
***
If you are running XP Go to control panel and then active sync while connected in MAGLDR while it states Wait USB...USB and un-check Allow USB then right click the DAF.exe and run as Admin, that should allow you to install.
***
Nigel

Many thanks. I will check now.

Oh yeah I understand. That seems to be a bug of the DAF installer. These files normaly get removed after the RUU has run. And they also do in the DAF installer.
THANK YOU!

still not working
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

this aint working for me, its like my pc aint fiding my phone. or the bug fix doesnt help.
however i can use diskdrive mode and htcsync works. so i dont get it.
im just trying to get the new kernel on my stock desire nand.
plz help,

I was getting the same error. I took these three steps, and all is now working - im not sure if all three 3 steps contributed to success, or any one of them - but taking these measures definately worked for me (im running Windows XP by the way)
The phone should be connected to the PC at all times during these steps.
1) Install MAGLDR using admin rights. This was done by right clicking the Magldr.exe and selecting 'run as', then clicking 2nd option, signing in as a user with admin rights.
2) Open ACTIVESYNC, 'File', then 'Connection Settings' - UNCHECK 'Allow USB connections' Reboot phone
3) Right clicking 'DAF.EXE' file and running with admin rights (like it was done in Step 1 above). Click Next, next untill its searching for USB connection
4) On phone, select option 4.
hopefully, it should all now work
Hope this helps.

try your method....
but still error msg come out..
[Error happen
Read below for more information
Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (802)
Error Description:
Info: .\RSPL\RSPL.cpp (545)
Click to expand...
Click to collapse
it only process till half way..
using windows xp..

Run as administrator!
Sent from my HTC HD2 using XDA App

Please note that. You must have HSPL 2.08 and Radio Rom 2.15.50.14 on your device

Same Error for me.
After Right Klick and Start as Admin it works prompt.
Windows 7 X64
Give it a try.
Xoombie

Getting same error here even with the suggested fixes. Ran as administrator, added the missing files and still the same USB init error. I am using the correct HSPL and radio files. Could it be the Windows XP laptop that I am using? Will try my other laptop running Vista and report back.

This may could be a solution for a couple of us flashers:
After flashing the NAND Android rom to the Leo I deleted the WinMo device Center which includes all the drivers for the device.
Now I installed the device center again and was able to flash !

thank you very much. this was exactly the problem in my case and it works now. thanks again!

I know a solution, on the little Active Sync Menu, after MAGDLR recognizes that it's connected, I mean when you get on the phone screen: USB...USB
Go to file, connection settings and uncheck allow USB connections. After this run the DAF.exe, it should work normally. (xp users)

Its win xp thats the problem!
I have flashed via win7 and vista.

I have vista, and I had the same problem, but when you read the dft 1st screen, READ ALL INFO TILL YOU GET TO THE BOTTOM OF THE PAGE, THEN CLICK NEXT. THIS WORKED FOR ME AND ALSO OPEN EVERYTHING IN ADMIN MODE!!!

Just open the DAF.exe before selecting flasher in magldr that how it works for me

I was having the same issue. I downloaded the NAND version from the DFT and the NAND from CMN 6.1 v.1.01. I replaced all the files from CMN with with the files from DFT so that I didn't use DAF. The problem is DAF. Just load Android with another Launcher.

loading nand
Restart Phone hold down power button and when you get to MAGLDR menu use Vol. down and choose option 4 by pressing Red button(bottom right). Then goto computer and right click DAF.exe and run as administrator and this sould work.

Well, I used my Vista computer instead of my XP computer to redo the install. Saw on another thread that a person used the ANDR_INSTALL execution file from the NAND CM6.1_1.02 build to replace the DAF execution file of the current NAND build they were trying to upload. In my case it was Cmylxgo's NAND build. Started from scratch and now I was able to load Cmylxgo's NAND build properly. Not sure if it was not using an XP computer or replacing the DAF file with the ANDR_INSTALL file from another build but it worked for me. Now to see what the battery drain and use is vs. the JNF WM ROM, MDJ Froyo 4.6 build with Hastarin 8.6 kernel that I have been using.

[Q] Original ROM Backup

Is it possible to make a backup of the original ROM?
I know how to update shiped or cooked ROM. I want to know is it possible to backup original, before doing ROM update?

You can always download your original rom from HTC site or find it here:
http://shipped-roms.com/index.php?category=windows mobile&model=Photon

emrause thanks for the reply.
Unfortunately, the HTC support site does not offer the possibility to download my ROM
and :
http://shipped-roms.com/index.php?ca...e&model=Photon
does not have my ROM in the list, I tried several different but not going...
ERROR [294]: Invalid Vender ID
I want to know is it possible to make a backup of the original ROM?

sorry... it's out of my knowledge...
but tell me what is your original ROM version and from where. Maybe I can find it for you.

15MA1L said:
emrause thanks for the reply.
Unfortunately, the HTC support site does not offer the possibility to download my ROM
and :
http://shipped-roms.com/index.php?ca...e&model=Photon
does not have my ROM in the list, I tried several different but not going...
ERROR [294]: Invalid Vender ID
I want to know is it possible to make a backup of the original ROM?
Click to expand...
Click to collapse
some problem

Original rom backup
Hi
Full ROM but I do not know,
HD MINI I do full backup with spb backup. works well and is the most complete upgrade 'the times to detect whether the ROM is different. trying to adapt to the new rom has no problems since then. Spb backup calendar contacts as well as sms etc ... I noticed that also makes backups (file system) ....... also imports well with CHT COOKIE 'S. I hope to be helpful.

15MA1L said:
emrause thanks for the reply.
Unfortunately, the HTC support site does not offer the possibility to download my ROM
and :
http://shipped-roms.com/index.php?ca...e&model=Photon
does not have my ROM in the list, I tried several different but not going...
ERROR [294]: Invalid Vender ID
I want to know is it possible to make a backup of the original ROM?
Click to expand...
Click to collapse
I solve this problem
with DFT_SSPL_MINI.zip
I used spb in daimond and the like

I bought an Unlocked HD mini T5555 and I tried to flash one of the custom ROM posted in the ROM section and the costum ROM failed to update at 1%, and now everytime I boot it up, it says :" software update failed Please try again"
I cannot flash any rom because of the Error294 Invalid Vender ID, and If i try to flash it from SD card it gives me 0028002 not allow message. Please help!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

anh4xeo said:
I bought an Unlocked HD mini T5555 and I tried to flash one of the custom ROM posted in the ROM section and the costum ROM failed to update at 1%, and now everytime I boot it up, it says :" software update failed Please try again"
I cannot flash any rom because of the Error294 Invalid Vender ID, and If i try to flash it from SD card it gives me 0028002 not allow message. Please help!!!
Click to expand...
Click to collapse
use SSPL:
http://forum.xda-developers.com/showthread.php?t=801481
when you run the SSPL the first time your phone goes to 3 colors screen and you will get error on your PC. don't worry wait about 10 sec and run SSPL again.
Good luck

anh4xeo said:
I bought an Unlocked HD mini T5555 and I tried to flash one of the custom ROM posted in the ROM section and the costum ROM failed to update at 1%, and now everytime I boot it up, it says :" software update failed Please try again"
I cannot flash any rom because of the Error294 Invalid Vender ID, and If i try to flash it from SD card it gives me 0028002 not allow message. Please help!!!
Click to expand...
Click to collapse
1.extract DFT_SSPL_MINI.zip (http://forum.xda-developers.com/showthread.php?t=694409)
2.extract your Ruu...........exe
3. copy DFT_SSPL_MINI.exe and RUU_signed.nbh in some folder
4. run DFT_SSPL_MINI.exe

giorgib said:
1.extract DFT_SSPL_MINI.zip (http://forum.xda-developers.com/showthread.php?t=694409)
2.extract your Ruu...........exe
3. copy DFT_SSPL_MINI.exe and RUU_signed.nbh in some folder
4. run DFT_SSPL_MINI.exe
Click to expand...
Click to collapse
THANKS, I TRIED this method so many tiems with many different ROM now, I still doesnt work for me.I dont know which RUU....exe that my phone belong to, every one of them gave me Invalid vender ID. With nsourm and madmatt ROM the progress bar stuck at 0% then it failed after 5 minutes. Please help!!!!

anh4xeo said:
THANKS, I TRIED this method so many tiems with many different ROM now, I still doesnt work for me.I dont know which RUU....exe that my phone belong to, every one of them gave me Invalid vender ID. With nsourm and madmatt ROM the progress bar stuck at 0% then it failed after 5 minutes. Please help!!!!
Click to expand...
Click to collapse
First of all sorry to say you broke your mobile
Secondly, now you have no partition or the whatever ROM
... and in these circumstances it is impossible to do update
Third, I think you will never again make that mistake stop connection in ROM update
and in the end the only thing I can recommend to send back to the factory, I'm sorry, honestly but I can not give you any better advice

15MA1L said:
First of all sorry to say you broke your mobile
Secondly, now you have no partition or the whatever ROM
... and in these circumstances it is impossible to do update
Third, I think you will never again make that mistake stop connection in ROM update
and in the end the only thing I can recommend to send back to the factory, I'm sorry, honestly but I can not give you any better advice
Click to expand...
Click to collapse
One last hope, will a SD Goldcard do the job?

anh4xeo said:
One last hope, will a SD Goldcard do the job?
Click to expand...
Click to collapse
I do not have any experience with SD GoldCard so I do not know
Q: Have you asked anyone here for that?
http://forum.xda-developers.com/showthread.php?t=682051

How to install windows phone 7 on Htc hd2

Hi im new, im trying to re install the OS of my htc HD2 my phone stats is this: when i try to turn it on it just turns on in a white screen BUT when you turn it on In bootloader mode it turns on normally on booloader mode
and this is the Phone specs in bootloader mode:
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
if you guys can send me the files and the tutorial i will really aprettiate that thanks for reading

look my signature
edit:
ups, you have new model PB81120 and think this is problem.. anyone can confirm?

try this link if it helps
http://forum.xda-developers.com/showthread.php?p=25781675#post25781675

dxdy said:
look my signature
edit:
ups, you have new model PB81120 and think this is problem.. anyone can confirm?
Click to expand...
Click to collapse
Hey,
i am new... i was proceeding accordingly manual, but met some problems...
These error are after flashing:
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: Block is after end.
Info: .\RSPL\RSPL.cpp (704)
Can you help please?

set magldr settings correct before flashing

dxdy said:
set magldr settings correct before flashing
Click to expand...
Click to collapse
yes, helped... many thanks.
now issue of activation... let's search the forum... or maybe you have some shortcuts? i have used softwares from your posts. everthing is working fine so far. sometimes some unreasonable resets of the software with changed data and time afterwards. But except this all was fine. i used v8.1

for live activation code you can call Microsoft local office in your country (if exist) and ask for Live activation code for HTC HD7...
or use English chat
http://support.microsoft.com/contactus/cu_sc_selector_chat?ws=support
switch to united states
load link again
and select General Inquiries about Microsoft Products and Services or Genuine Advantage Questions
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

dxdy said:
for live activation code you can call Microsoft local office in your country (if exist) and ask for Live activation code for HTC HD7...
or use English chat
switch to united states
load link again
and select General Inquiries about Microsoft Products and Services or Genuine Advantage Questions
chat doesn' work, they need prove of purchase htc hd7...
trying with call...
any other advices?
Click to expand...
Click to collapse

only what you need to give is your name and phone number... nothing else...
if you cant get code, try here
http://forum.xda-developers.com/showthread.php?t=1532197

dxdy said:
only what you need to give is your name and phone number... nothing else...
if you cant get code, try here
http://forum.xda-developers.com/showthread.php?t=1532197
Click to expand...
Click to collapse
ok, i managed that finally...
through chat...
i have some doubts about the phone number given, what for it was?

luobote said:
i have some doubts about the phone number given, what for it was?
Click to expand...
Click to collapse
I've read here in the forums they're storing this data in a certain database...

Continous Error Msg in wp 7 rom installation
Everytime i install wp7 rom I keep getting this msg: "Readme.txt for this release is missing". How can I fix this?

hehehe this not error... just go next.... readme.txt file not included but this not important and not block flash process

Errors while trying to flash new ROM on my HD2 - [SOLVED!]

Hello everyone,
i have a problem setting up wp7/nativesd android dual booting on my HD2.
I've read all the guides and troubleshots but I don't seem to bypass my errors im getting.
So let me explain things, I own HD2 with 2.08 hspl and 2.15 radio.
My procedure:
A.)
1. Task29
2. install MAGLDR 1.13
3. (optional) repartition MAGLDR to system 300mb/45mb cache
B.)
1. (optional) services/uselast24nand and clearSD mbr
2. (optional) AD Recovery - working!
3. USB Flasher mode
4. Start DWI.exe (tried some: .., Pdaimatejam Rom Wp7.8 OS 7.10.8835.35 v8.5, DFT Ultrafruit, H2O2)
Result: Procedure B/4 always fails with an error while flashing partition 4:
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I get that error whatever I do. I repeat the steps from my Procedure A/1 and onwards with different (option) points written above with no success.
Can anyone please help me? I am desperate, seriously, already changed my HD2's motherboard and upper board for nothing - same problem persists.
Thank you for trying and reading!
PS.:
I've tried the above procedure with 3 SD cards, Samsung 16gb class 6, Transcend 32gb class 4, Kingston 8gb class 10. No luck
PPS:
I found a solution. I tried from scratch, back to stock wm6.5 and SPL 2.08.
Than I installed HSPL, next thing I HAVE always DONE before was TASK29 (I DID NOT PERFORM THAT NOW), but rather than that I installed MAGLDR directly. After that I followed the guides as usual, worked like charm!
ME HAPPY NOW!

when flashing wp7 did you run
- clead SD MBR
- use last24Nand
this will happen if you didn't choose those in magldr
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

yes I did try those 24mb and sd clear, it seems like the task29 was the problem. Without task29 everything worked like charm. =)