Database Users

XDArit - read error from SD card?

Hi !
i tried to read my saved 3.14-ger rom from my SD card (saved as boot+ce)... but XDArit (new version) says: Did not find correct flash signature, aborting!
Why ? what did i do wrong?
Jabba

what does it display in the first page ?
does it start with 'HTC$WALLABY' ( if so what number follows? )
or does it say 'FLASH KEY'
or does it say 'FAT16'

nothing was displayed.
was very weird... i installed some win2k-drivers on my winxp for the sd-card, now it works !

my one see FAT16 it not 'HTC$WALLABY' WHAT I MAKE WRONG >?

WHAT ARE U MORE INSTALL ON TO XP ? PLEASE TELL ME I NEED TO FIX THIS PROBLME TOO

if you see 'fat16' that means your sd card is still formatted for normal use.
after xdarit or your bootloader have written data to your sd card,
you will see 'HTC$WALLABY' in the first bytes.
the 'FLASH KEY' is what you would see with bootloader 5.17, I am not sure
if xdarit supports this correctly.
I didn't need to install anything on XP, I just plugged a usb cardreader
in my pc, you see some popups about windows finding new hardware, and drivers. and after about 1 minute it worked.

the new ver 1.2 of XDArit.exe
when i use it Write a image to sd card,it 's return a error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Same Here
I get the same message in XDArit.,
Also. recently installed the latest program A update 3.17 from O2 to my UK XDA all went well, then (before I discovered this website!!) I foolishly (it now seems) went to the Program B uprade. this hubg up in mid flash!!
Now my poor XDA is in a sorry condition does wird and wonderful things, random backlight on off, responds to ocasional button pushes.
where can I get the GSM ROM to flash into it?

I also receive XDARite error with version 1.0.2.....
I have tried three different card readers and all of them give me this error....
Todd

Could someone please help me.

Hello everyone.
Could someone please help me.
I have tried different ROM to do a clean install and the whole process is done without any problem at all steps tells me everything is fine but when it restarts to begin using the ROM says to me in red letters NAND kernel open failed
I cant think what to do, this is not my first flash ROM and had never had problems.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

What ROM did you flash, and what partition size for CWM is installed on your phone?
It's possible you have flashed to too small a partition, can you please tell exactly what steps you took to get to where you are now?

huggs:
Thanks for your interest in my problem
I try installing these ROMs:
1) TyphooN CyanogenMod 7, Whit MAGLDR 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5)
2) BOYPPC-SHIFTPDA_GINGER_2.3., Recovery_150 for boyppc-shiftpda rom
download from the original thread for each rom

i think you didn't make the proper cwm partition. download http://forum.xda-developers.com/showthread.php?t=1090783 hd2 nand tool kit. connect your phone to pc-choose usb flasher in mgldr menu, you must see usb flasher....usb. then open nand tool kit in pc-choose mgldr repartition-choose required partition size (say 150mb) if not present in list choose custom-in cache partition write 5-click repartition (at left bottom)- after finishing go ad recovery in mgldr-install zip from sd-choose zip from sd-find your rom in list. when installing is completed press back button-reboot

Thanks for your help, follow the exact steps by steps but still giving the same error, even resize the cache to 5mb as started in the original thread but still giving me the same error

if you write all the steps you take exactly we can help you more easily. but dont miss any of them

ocatapano said:
Thanks for your help, follow the exact steps by steps but still giving the same error, even resize the cache to 5mb as started in the original thread but still giving me the same error
Click to expand...
Click to collapse
Make sure after you do those steps, to flash TYPHOON instead of BoyShift. Boyshift needs a bigger partition, but 150 is the correct size for Typhoon.

[ROM] Huawei u8650 GGR Next Gen

So here is the New Rom for your Huawei U8650.
The Rom was tested for 3 weeks and so far has no bugs, the rom is fast and stable, it's based on 2.3.5 Huawei rom, with OC kernel up to 780MHz, it also have app2sd.
I has 360 launcher added so thanks to the original uploader
I assume that everybody knows how to root and custom recovery the U8650 if not just search my other post.
Note: YOU FLASH AT YOUR OWN RISK. I'M NOT RESPONSABLE FOR ANY DAMAGE TO YOUR DEVICE.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How To Install:
1) Boot in recovery
2) Wipe data/cache/dalvik
3) Partition SD 128 Ext and 64 Swap (Partitioning SD erase data on SD, so BACKUP)
LINK:
http://www.mediafire.com/?texsqsoa9pa4vp2
If you like my work buy me a beer

Not for me
Unfortunately when I try this on my U8650, I get
Code:
E:signature verification failed.
What am I doing wrong ?

qong said:
Unfortunately when I try this on my U8650, I get
Code:
E:signature verification failed.
What am I doing wrong ?
Click to expand...
Click to collapse
What recovery do you use???

Thanks for your response.
I'm a complete newbie.
I'm not sure, how do I find out ?
All I did was install the standard ROM by downloading it, copy it to the sd card and restarting whilst pressing Vol+, Vol- & the power button on my U8650.
Then I rooted it by restarting whilst holding down Vol+ & Power and then selecting the root.zip.
After that I tried the same with your zip !!
That's all I've done since I've had the phone.

OK, not so much of a newbie anymore.
Managed to install a CWM and then your ROM
Seems a bit slower. But it's beautiful.
Xiexie ni

Volume
how increase volume like cyanogenMod

Weather widget
How can I change the weather widget to a european city ?
When I try to change the location, it only seems to recognize chinese.

Problem with mobile networking
Hello i have encountered only 1 problem with your rom (or is it my mistake?) and it's about mobile internet.I can't get it to function ... It can find all available and says it has registered on the one I want but then there's no internet...some1 pls help

Hi,
I had a similar problem.
Eventually, I figured out that I had to manually add the APN.
This is done in
Setting - Wireless & Networks - Mobile networks - Access Point Names
Hope this helps.

damn i knew it was about that..but idk how to set up an APN i'm kinda new to all this(tele2 croatia)
nvm i did it ty ery much

[Q] Android Rom not loading

Hello everyone,
I've been trying to get a ICS rom on my phone.
I downloaded the ROM from
http://forum.xda-developers.com/showthread.php?t=1434860
I used the guide from
http://forum.xda-developers.com/showthread.php?t=1402975
where it uses clk?
The ROM post mentions having its own cLK and MAGLDR kerenls. Am I supposed to be installing them? I've been using the cLK from the HD2 Toolkit.
If so how do I do it?
I don't have another phone to put my SIM card in so people can't call me. I should have thought about that before I did this haha.
Thanks,
Tryo

First, depending on your cLK's version :
*Either repartition from within cLK (if using 1.5)
*Or repartition from the toolkit (if using 1.4)
After that, flash the rom as usual from within CWM.
Finally, the ROM uses MAGLDR Kernel by default. As a cLK user, you'd have to flash cLK kernel (found right below the ROM's link) after flashing the ROM immediately (BEFORE RESTARTING).
The ROM should boot up fine after a fair amount of time .

Hey have you this ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

@Marvlesz
I understand what to do until you mention
"As a cLK user, you'd have to flash cLK kernel (found right below the ROM's link) after flashing the ROM immediately (BEFORE RESTARTING)."
How do I flash a cLK kernel? The toolkit flashes a kernel by itself, how would I specify which one?
@MaxPayne3004
Yes I do get that screen.
After installing the rom from the SD card and rebooting it,
I get the image that's a black screen and says "Fastboot: Processing Commands"
(I wanted to post a picture but I need at least 8 posts =/ )

NVM got it working. The loading screen looks so epic.
As you said
s a cLK user, you'd have to flash cLK kernel (found right below the ROM's link) after flashing the ROM immediately (BEFORE RESTARTING).
did the trick!

[Q] Seems like phone is hanging while ROM installation

Hi,
I followed carefully all instructions for ROM installation from this thread:
http://forum.xda-developers.com/showthread.php?t=2059651
All went fine until ROM installation. I have chosen rom (zip) file and pressed install.
You can see what happends here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when I turn on some more logging I get this message:
e: opening /res/keys: no such file
Click to expand...
Click to collapse
I re-dowloaned this rom again and it did not help.
I tried 3 more roms and always there is same situation.
PC says that Phone drivers are upto date.
There were NO errors in the meantime.
I have re-installed CWM but it did not help either.
Someone has any ideas about it?
regards
katwit

Sorry, but what do you mean by this? not installing? not booting? or what ROM you used?

Hi IPlasm
iPlasm said:
Sorry, but what do you mean by this? not installing? not booting? or what ROM you used?
Click to expand...
Click to collapse
If you see the photo with rom installation screen - it hangs on that screen. So i think it is not installing what also causes not booting
I tried first 3 from
http://forum.xda-developers.com/showthread.php?t=2043917
Regards
katwit

katwit said:
Hi IPlasm
If you see the photo with rom installation screen - it hangs on that screen. So i think it is not installing what also causes not booting
I tried first 3 from
http://forum.xda-developers.com/showthread.php?t=2043917
Regards
katwit
Click to expand...
Click to collapse
So you have tried the latest ROMs,
after "opening package" written, you should be able to see "Installing..." with Title "Phonerty" on my ROMs. and at least it just takes 5 minutes.
If not shown, then the Zip must be corrupted while downloading or your SDCard can be unclean or damaged microSD, try to format your SDcard FAT32. or you can even Partition that will format your SDCard in the Recovery on your Phone!, go Advanced and partition, after completing that, you can copy your ROM zip files via USB at recovery Mount options.
after installing, you must Installation completed... then Manually restart your phone.
Have a nice try

Worked!
Dear iPlasm!
Many thanks - it works fine. Many thanks again!
regards
katwit