Related
I have recently taken delivery of an Otterbox for use on my bike (GPSComputerCycle and music) but to save power I would like to be able to turn the screen off during the ride (xpshutdown allows me to do this) and then press the screen if I want to turn the HD back on again.
I use S2U2 if this makes an difference.
Is there a setting somewhere which allows me to press the screen to power the THD back on again (even if it goes to a lock-screen)?
I had a quick look through the settings (Screen/Power/Lock) but couldn't find anything.
Anyone help?
Thanks
Not possible AFAIK.
When the screen powers down, that applies to the touch-sensitive mechanism as well as the display element.
It would probably require something deeper than even a registry hack, the drivers would need re-writing or something.
Its not possible for the simple reason that the buttons below the screen are part and parcel of the touch screen, so if the screen is off, they won't work.
There appears to be no power to these lower buttons while in standby, so no software could work either?
However there is other ways of doing this:
1. Use s2u2 unlock on stylus out, so when you pull out the stylus, the HD comes on and unlocks. It's simple.
2. MobileMagic to toggle the screen on/off when device is turned face down. That way when you turn it face down, screen goes off and buttons are locked. To turn it back on, turn devicedevice face down again. You will need need to go to Start-Settings-System-Power-Advanced and untick the option, "Turn off device if not used for", because if the device gets turned off (instead of just screen off) it won't respond.
Hope this helps
Unfortunately the HD will be inside an Otterbox mounted on the handlebars of my bike, so removing the stylus would not be an option and neither would using the G-Sensor.
Sounds like I will have to have it powered on all the time. I know that GPSCycleComputer dims the display while it is active, so this might be a part solution.
Thanks for all the answers though. I was being a numpty after all!
Regards
GLOC said:
Unfortunately the HD will be inside an Otterbox mounted on the handlebars of my bike, so removing the stylus would not be an option and neither would using the G-Sensor.
Sounds like I will have to have it powered on all the time. I know that GPSCycleComputer dims the display while it is active, so this might be a part solution.
Thanks for all the answers though. I was being a numpty after all!
Regards
Click to expand...
Click to collapse
Alternative solution:
Attach a dynamo to the wheels of your bicycle and charge your HD on the go
I wouldn't be able to even begin telling you how to do this though!
i`m currently playing and tweaking my 3 day old HD2. Shame I got one, now my Rhodium and Kaiser are oldish and forgotten =) What a wonderful device the HD2 is.
So far, I´ve managed to tweak all the things I wanted, except for one: in all other devices, I can access the system page and a "keylock" option there, so I can configure the device to wake up ony if the power button is pressed while locked. There is no keylock option in the HD2, and while in the pocket, buttons keep getting pressed and the screen is turning on. I want to reduce that to as few times as possible (since battery life seems to be a problem with the HD2).
Any ideas ? Guess they removed the keylock option simply because the HD2 does not have a power button... anyway, waking up the device with a specific key (only) would be nice.
tia
I'm looking for the same thing. Please advice!
/R
Add me
to the list that would like this option. My HD2 is always being turned onin my pocket and its seriously reducing the bettery life!!!
ok... bump. My day ended up with a dead phone. The screen turned on so many times that the cellphone got warm... more than once.
doesnt it has Automatic lock ????
rahulelectra said:
doesnt it has Automatic lock ????
Click to expand...
Click to collapse
... it does... and it works. Problem is not locking or remaining locked, but the fact that the screen turns on even locked.
I mean, if you lock the phone, there is only 1 way to unlock it (by sliding the unlock button on screen). But hitting *any* button (except for the volume) brings the display up. Since the buttons are elevated, it´s not that difficult to keep hitting the buttons while it is in your pocket.
The end result is that the screen remains lit, wasting battery. It would be nice if, once locked, only 1 single button would bring the screen on. That would reduce the chance of turning it on by accident.
With my Kaiser and Rhodium, both have a power button. Once the screen is locked, the only key that will bring it to life is the power button itself (that is somewhat difficult to hit by accident). But the Leo does not have a power button.
Would the leather case solve that? I know it's more impractical but if anything saves battery it would be worth it.
MrMagicMushroom said:
Would the leather case solve that? I know it's more impractical but if anything saves battery it would be worth it.
Click to expand...
Click to collapse
Unfortunately, no... In fact, the standard leather case (that came with it) is so tight that if you put the phone with the buttons first, they get pressed.
StealthNet said:
Unfortunately, no... In fact, the standard leather case (that came with it) is so tight that if you put the phone with the buttons first, they get pressed.
Click to expand...
Click to collapse
Yeah just tried, don't think it will loosen any more either. I guess you need a jacket pocket with plenty of space, a trouser/jean pocket would be fine until you sit down.
Well, didn´t find any app that would help me do this trick. In fact, a simple app that enable us to configure the key that wakes up the phone after locking, could solve the problem. Was thinking about changing to the volume down key (guess it is one of the hardest to accidentally press, like when in a pocket).
As a temporary measure, if you use the leather slip case it came with, put the phone in upside down so that the USB is pointing out the open end.
I've bought a leather executive flip case that stops accidental button pressing. But it's not everyone's cup of tea to make the phone bulkier in the pocket.
Any people can provide other solution like change the registry or make a simple software?
p7822 said:
Any people can provide other solution like change the registry or make a simple software?
Click to expand...
Click to collapse
Bump - someone must know the answer - I hope!
Just to share my experience.
I never use the leather case. It is too tight to squeeze in. And the HD2 is not as fragile as the other models. However if you use a screen protector, then you may find that it is pretty easy to scratch and dent the screen protector, which is rather visibly annoying.
As for keylock, I think TouchLockPro is rather good. It can't stop the end button from waking up the phone. Nobody can, because it is the only method to wake up an HD2. However, you can set the phone to go back to sleep in say 5 seconds. Or you can keep it always locked when it is dark (in your bag or pocket).
So after having phone for 10 days now i find that it likes to unlock him self in my pocket, and if i go near my pocket with my fingers, or if its faced down so it touches my body, screen reacts , unlocks and does stupid stuff on phone.
My question now is: Is it possible to make some applicaiton, that would disable unlock on hard Menu button, and any on screen unlock patterns, but just phone can be unlocked by pressing optical trackball down(which is nearly impossible to press in pocket because of its nice positioning)
And please dont suggest me unlock patterns or pins, because i just dont like them.
I agree, i experience the same problems,
and I would suggest to this idea, that if it would be possible to implement ability remapping of the on/off key ( at least the time needed to push the key ) to turn screen on. because i experience turning the phone on in my pocket by selfpushing the on-off.
and to be honest, i like to use the screen with my fingers, not using the optical trackball at all an sometimes when i scroll with fingers, it interferes when my finger slips, or rests.
so my suggestion. to increase the time needed to push the on/off button to make screen active if possible
to make the optical trackball push make unlock the screen.
and an ability to disable optical trackball scroling ( not pushing, just disabled scrolling )
I had same problem , way i got around it,
put a lock pattern on your screen, but also add a widget to set the lock pattern on/off, that way when your going out with the phone in your pocket you set the lock to on and it wont do anything. when your at home,turn it off to get easy access.
Yeah, that works, but is not smooth.
hate the lock pattern.
the ideal case would be by on home page to disable on off button and.
with long push optical trackball to lock/unlock screen.
i dont understand how does it happen for you guys, do you never use power button to put it on sleep? i had this phone for pretty much a month now and it hever happened to me even when was wearin fairly tight jeans.
btw try lockpro app from the market it is paid though unfortunately
cez10 said:
i dont understand how does it happen for you guys, do you never use power button to put it on sleep? i had this phone for pretty much a month now and it hever happened to me even when was wearin fairly tight jeans.
btw try lockpro app from the market it is paid though unfortunately
Click to expand...
Click to collapse
+1, never happened to me too, i guess you guys set the screen to not turn off? lol.....
even if the phone is ringing, i can still take it out of my pocket without it being answered....well i must say it's in a pouch too....maybe thats a solution to your problem....
I think it depends on how tight your trousers are maybe? if the button is pressed, and you pull it out the slider slides down??
Just a guess
Lol yea and if your pocket is actually your underpants, since my phone won't react to any touch with fabric between my skin and the screen.
My suggestion is that you grow some hair on your legs (or stop shaving), then you will have no problems.
And yea I have never had this problem in the 2 weeks or so of ownership. Although I do put them in my pocket where it is surrounded by a layer of cotton being the lining of the pocket, so that it is impossible for my skin to touch the screen. Not sure how your pockets work?
Use the unlock pattern.
Menu/settings/security/
this way it cannot unlock itself unless you draw the pattern, plus it helps if anyone picks up your desire wthout you knowing.
P.s I have never had an issue with the screen unlocking in my pocket, holder or anything else.
As i wrote on end of my strating post. I DO NOT LIKE unlock patterns. It doesnt prevent phone to turn on, and + its damn ugly.
To repeat ones more. I would like a way to disable screen ON using main power button, and set it so it only turns on by optical trackball click(not unlock directly, just to turn ON screen).
I'm using nice leather case for phone, but lots of times i push it in i turn on the screen. + with other in pocket random stuff which i explained..
OnlinePredator said:
Lol yea and if your pocket is actually your underpants, since my phone won't react to any touch with fabric between my skin and the screen.
My suggestion is that you grow some hair on your legs (or stop shaving), then you will have no problems.
And yea I have never had this problem in the 2 weeks or so of ownership. Although I do put them in my pocket where it is surrounded by a layer of cotton being the lining of the pocket, so that it is impossible for my skin to touch the screen. Not sure how your pockets work?
Click to expand...
Click to collapse
Well it happens to me sometimes. If I press the lock button and then slide the phone up from my pocket while the screen is turned towards my leg, it unlocks.
The desire touch screen actually works trough thin fabric (like the one they make pants pockets from). Try putting your shirt between your finger and the screen. You'll see it'll work.
unlock bug?
ivicask said:
As i wrote on end of my strating post. I DO NOT LIKE unlock patterns. It doesnt prevent phone to turn on, and + its damn ugly.
To repeat ones more. I would like a way to disable screen ON using main power button, and set it so it only turns on by optical trackball click(not unlock directly, just to turn ON screen).
I'm using nice leather case for phone, but lots of times i push it in i turn on the screen. + with other in pocket random stuff which i explained..
Click to expand...
Click to collapse
plus isn't there still a bug in 2.1 where if you put the unlock pattern in wrong 5 times you can't unlock your phone and it doesn't accept your google account password?
ivicask said:
As i wrote on end of my strating post. I DO NOT LIKE unlock patterns. It doesnt prevent phone to turn on, and + its damn ugly.
To repeat ones more. I would like a way to disable screen ON using main power button, and set it so it only turns on by optical trackball click(not unlock directly, just to turn ON screen).
I'm using nice leather case for phone, but lots of times i push it in i turn on the screen. + with other in pocket random stuff which i explained..
Click to expand...
Click to collapse
It is not possible. There was a big thread about this in the HTC Hero section. It needs the source code to be modified.
Not sure what you mean OP, my phone is in my pocket everyday and also inside a pouch, basically when i want to lock my phone i hit the power button and it will go into lock mode with the screen off, when i want to start it again, i press the power button and this displays a screen which is locked, i then have to move the slider down in order to unlock it, based on what you are saying i am finding it hard to imagine how it is unlocking in your pocket so can you confirm that your phone acts in the same manner as mine does and please explain more on how this is unlocking please.
haggisuk99 said:
Not sure what you mean OP, my phone is in my pocket everyday and also inside a pouch, basically when i want to lock my phone i hit the power button and it will go into lock mode with the screen off, when i want to start it again, i press the power button and this displays a screen which is locked, i then have to move the slider down in order to unlock it, based on what you are saying i am finding it hard to imagine how it is unlocking in your pocket so can you confirm that your phone acts in the same manner as mine does and please explain more on how this is unlocking please.
Click to expand...
Click to collapse
Well i do know what OP means. I had my Desire one day and accidentally denied 4 out of 5 calls by taking the desire out of my pants. I make a habit of putting my phone up side down, screen facing inwards inside my pocket. So, on an incoming call the Desire shows the vertical slider, which is slided upwards by taking the phone out of your pocket, thus denying the call.
It's the most stupid design for a lock screen i've ever seen, and it could have been avoided if only one HTC engineer had made a few test calls to anothers Desire in his pants.
I installed Lock 2.0 which gives a horizontal slider on the lock screen, and which brings back the default accept and deny on-screen buttons. Still not perfect, but much better than the vertical slider.
+1 for the previous post. thx for the lock 2.0 app tip. I will download and try asap.
it does a lot of unwanted stuff in my pants...incl. self unlocking, call denying. etc..
shame that the unlock cant be easily recoded to the optical button.
Optical click unlock is already in the Cyanogen rom for desire.
i have searched around and haven't found quite what im looking for. i find my phone screen is turning on in my pocket and sometimes unlocks. i hear the sound of it unlocking all the time just from the pressure against my leg. i keep it so my screen is faced in because of what i do for work i could easily smash it against something. i have bought a case that helps prevent the side power button and the home button from being pressed but still happens quite often.
what i am looking for is an app/mod that will keep the screen from coming on when the proximity sensor detects that it is in my pocket. this would need to work regardless of whether home/power buttons are pressed or a notification wakes it.
if anyone knows of something like this for our phones i would much appreciate it.
Don't have that app/mod, but you may be interested in this one instead. Killing the home button's ability to wake up the phone. I did this on my S4, although you only need to modify the one file, the gpio-key.kl. You need to be rooted:
http://forum.xda-developers.com/showthread.php?t=1702675
Thanks ill give it a try and see if it cuts down on screen on time. I have noticed that ill get notifications and phone calls that will turn the screen on and then simply walking will be enough to swipe and unlock. This screen is much more sensitive than my old epic.
I found out the other day that this phone has lift to wake. My question is: How does it work exactly? Assuming no lockscreen security, does it work like the iPhone and OnePlus 5? i.e. Does it automatically turn on when you lift it toward you so you can interact with the screen, or does it just flash notifications? Can you just lift it up, then swipe to unlock? I'm asking because the phone has no double-tap-to-wake, which is a must-have feature for me, but this is a good compromise.
Thanks in advance.
Edit: To clarify, I'm asking if I can lift the phone and start using it WITHOUT hitting the power button.
Just like you described, lift to wake and notification wake, then you can intertact with it.
Lift it up and it wakes.
It does a black and white version of your lockscreen.
If you tap it hard enough, you can wake it btw without lifting it up.
I believe it uses either the gyroscope or acceleration sensor, or both. If you twist your phone or move it quickly, the dim display will turn on. Just like others have pointed out.
Also you can have it set up to be unlocked and ready when lifting up by setting up smart Lock. If your home your device can stay unlocked and when you lift it up it will be ready to go.
Do we know if we can enable a tap to wake or wave to wake?
Is this something we would need root for?
this function not smooth as iPhone.