So I start with some history:
SGS i9000
Currently using 10.2.2 (just flashed) JVQ
Android 2.3.4
When I got Darky 10.2 everything seemed smooth. Problems started to occur little by little. Battery drain, always 98-95% when taking off from the charger. Strange tilts, app / screen just freezes and after a while automatic reboot. Strange slowdowns, sometimes friends can't call me...
I think it's all because of custom kernel and rom.
Now I can't connect my Samsung to my Mac. It charges but no connection. I tried different cable, flashing 10.2 to 10.2.2. Wiping everything on the phone. Nothing. Phone is in Mass Storage state, also tried USB Debugging.
It's kinda hard to reflash this thing to previous systems because how do I flash with Odin without usb connection.
Any ideas?
You might try another PC with a fresh USB driver install. I'd suggest a Windows running one.
Restart phone and comp.
@zomirp: i'm not an idiot
I've done everything one could imagine. Tried PC instead of my Mac. Different USB cable. I've reflashed, wiped all data + dalvik cache. I've tried to switch USB from PhoneUtil to Modem and back to PDA but no help.
Boot into recovery and restore your nandroid backup from known working config. You have a backup right...?
Failing that, can't you download 10.2 again on your phone, restart in recovery and install using CWM?
@dolphindos sorry to hear that your phone is misbehaving.
I had something similar, but instead of immediatly blaming the software, I decided to take a look at the hardware.
what are the odds that software changes hardware....
I think your usb connector crapped out just like mine did recently. I went to the repair center got it fixed and all's fine now.
My thoughts have a look at the hardware
Yes that is a possibility. Well I guess I need to find a way to get stock firmware flashed since I can't take the phone with Darky's to manufacturer.
Alright, So I bought a brand-new Galaxy S4 i-9500 a couple of weeks back. Ever since day one, the phone has major problems working with my Sandisk Class 10 64gb sdxc card, which I was using in my Galaxy Note N7000, without any problems. The card also works perfect in my wife's Galaxy S3 i9300.
The problems include:
-> The phone showing card as "Damaged" and not mounting it.
-> Sometimes it mounts the card, but shows the card as 'Blank' or 'Wrongly Formatted'
-> And yet sometimes, it mounts the card, but does not read some specific files. Opening those will give a message which says "File format not supported". In the process, the phone heats up to pretty nasty levels, and the battery drain will be massive. The phone also becomes very slow, gets stuck, and sometimes even restarts, and the problem keeps continuing.
If I remove the memory card, the phone works like a charm. I tried a 16gb memory card which also produced more or less the same results.
Now, the real problem is this. Recently, I had tried to root the phone, and for that purpose, I tried flashing CWM from cofface, through ODIN 3.07 and 1.85. Both the times, the flashing process was successful, with ODIN giving the green "PASS" message. However, nothing seemed to change on my phone, and CWM was never installed. I could never get the CWM screen no matter what I tried (every instruction on the net, literally). I then left the matter.
When my aforementioned card problem bothered me a lot, today, I decided to re-flash the stock firmware to my phone. So I downloaded the stock ROM from Sammobile, the correct pit file from XDA and started the flash process. Flashing was successful, as shown by ODIN, and the phone rebooted. But to my horror, the phone was exactly in the same state, when I had switched it off. Nothing was ever changed, all my files and everything were intact, and nothing had happened at all!!!!
How is this possible??? The bootloader shows "Downloading" and the blue bar while flashing, ODIN shows everything and even says it succeeded, but then how come things on my Phone remains absolutely unchanged??? So then what did it re-flash and where to?? And is there any way to get rid of this memory card problem??
I googled a lot to see if anyone else is experiencing the same problem as mine, but never found anything, which leads me to believe that my device is one weird thing!
vivz990 said:
Alright, So I bought a brand-new Galaxy S4 i-9500 a couple of weeks back. Ever since day one, the phone has major problems working with my Sandisk Class 10 64gb sdxc card, which I was using in my Galaxy Note N7000, without any problems. The card also works perfect in my wife's Galaxy S3 i9300.
The problems include:
-> The phone showing card as "Damaged" and not mounting it.
-> Sometimes it mounts the card, but shows the card as 'Blank' or 'Wrongly Formatted'
-> And yet sometimes, it mounts the card, but does not read some specific files. Opening those will give a message which says "File format not supported". In the process, the phone heats up to pretty nasty levels, and the battery drain will be massive. The phone also becomes very slow, gets stuck, and sometimes even restarts, and the problem keeps continuing.
If I remove the memory card, the phone works like a charm. I tried a 16gb memory card which also produced more or less the same results.
Now, the real problem is this. Recently, I had tried to root the phone, and for that purpose, I tried flashing CWM from cofface, through ODIN 3.07 and 1.85. Both the times, the flashing process was successful, with ODIN giving the green "PASS" message. However, nothing seemed to change on my phone, and CWM was never installed. I could never get the CWM screen no matter what I tried (every instruction on the net, literally). I then left the matter.
When my aforementioned card problem bothered me a lot, today, I decided to re-flash the stock firmware to my phone. So I downloaded the stock ROM from Sammobile, the correct pit file from XDA and started the flash process. Flashing was successful, as shown by ODIN, and the phone rebooted. But to my horror, the phone was exactly in the same state, when I had switched it off. Nothing was ever changed, all my files and everything were intact, and nothing had happened at all!!!!
How is this possible??? The bootloader shows "Downloading" and the blue bar while flashing, ODIN shows everything and even says it succeeded, but then how come things on my Phone remains absolutely unchanged??? So then what did it re-flash and where to?? And is there any way to get rid of this memory card problem??
I googled a lot to see if anyone else is experiencing the same problem as mine, but never found anything, which leads me to believe that my device is one weird thing!
Click to expand...
Click to collapse
Same problem for me... i wanted reinstall the stock firmware completely but when i flashed it with ODIN nothing happened...
Markz88 said:
Same problem for me... i wanted reinstall the stock firmware completely but when i flashed it with ODIN nothing happened...
Click to expand...
Click to collapse
Odin doesnt wipe your device or delete anything of your data...
If you flash the same firmware with your device firmware then nothing's really happened..
But if you root or change anything to system - boot - recovery - modem partition then simply is going again to stock or to the version you flash..
Thanks
Maybe there is something wrong with flashing memory (emmc).
There is an app on play store to check it, but i dont know if it works on s4.
I suggest to replace your phone. Or send it to service center
Edit: flash another different stock firmware, and check pda and csc if has changed
sent from my galaxy
vivz990 said:
Alright, So I bought a brand-new Galaxy S4 i-9500 a couple of weeks back. Ever since day one, the phone has major problems working with my Sandisk Class 10 64gb sdxc card, which I was using in my Galaxy Note N7000, without any problems. The card also works perfect in my wife's Galaxy S3 i9300.
The problems include:
-> The phone showing card as "Damaged" and not mounting it.
-> Sometimes it mounts the card, but shows the card as 'Blank' or 'Wrongly Formatted'
-> And yet sometimes, it mounts the card, but does not read some specific files. Opening those will give a message which says "File format not supported". In the process, the phone heats up to pretty nasty levels, and the battery drain will be massive. The phone also becomes very slow, gets stuck, and sometimes even restarts, and the problem keeps continuing.
If I remove the memory card, the phone works like a charm. I tried a 16gb memory card which also produced more or less the same results.
Now, the real problem is this. Recently, I had tried to root the phone, and for that purpose, I tried flashing CWM from cofface, through ODIN 3.07 and 1.85. Both the times, the flashing process was successful, with ODIN giving the green "PASS" message. However, nothing seemed to change on my phone, and CWM was never installed. I could never get the CWM screen no matter what I tried (every instruction on the net, literally). I then left the matter.
When my aforementioned card problem bothered me a lot, today, I decided to re-flash the stock firmware to my phone. So I downloaded the stock ROM from Sammobile, the correct pit file from XDA and started the flash process. Flashing was successful, as shown by ODIN, and the phone rebooted. But to my horror, the phone was exactly in the same state, when I had switched it off. Nothing was ever changed, all my files and everything were intact, and nothing had happened at all!!!!
How is this possible??? The bootloader shows "Downloading" and the blue bar while flashing, ODIN shows everything and even says it succeeded, but then how come things on my Phone remains absolutely unchanged??? So then what did it re-flash and where to?? And is there any way to get rid of this memory card problem??
I googled a lot to see if anyone else is experiencing the same problem as mine, but never found anything, which leads me to believe that my device is one weird thing!
Click to expand...
Click to collapse
go to this link....
http://forum.xda-developers.com/showthread.php?t=2219803
get rooted from here ( even if u are)
in the same page u get a link to flash back to stock recovery. get that flashed
boot into stock recovery and get a factory reset done.
pull battery and back in...
turn on ur phone into download mode and flash ur stock rom using odin....
this is how i got mine working.... i had ur similar issue....
kiwimalayalee said:
go to this link....
http://forum.xda-developers.com/showthread.php?t=2219803
get rooted from here ( even if u are)
in the same page u get a link to flash back to stock recovery. get that flashed
boot into stock recovery and get a factory reset done.
pull battery and back in...
turn on ur phone into download mode and flash ur stock rom using odin....
this is how i got mine working.... i had ur similar issue....
Click to expand...
Click to collapse
ok..will try this now...my last resort
vivz990 said:
ok..will try this now...my last resort
Click to expand...
Click to collapse
i assure u its gonna work perfectly...
I am literally having the same problem on my S4 I337M, I'm gonna try what was suggested on here, maybe it'll work lol
i have exactly the same problem right now, i searched for a solution and i found ur thread.
going through the thread to see a solution
vivz990 said:
ok..will try this now...my last resort
Click to expand...
Click to collapse
was ur problem solved after flashing cf-auto_root? i mean were u then able to flash custom recovery via odin?
Is solved?
vivz990 said:
... I decided to re-flash the stock firmware to my phone. So I downloaded the stock ROM from Sammobile, the correct pit file from XDA and started the flash process. Flashing was successful, as shown by ODIN, and the phone rebooted. But to my horror, the phone was exactly in the same state, when I had switched it off. Nothing was ever changed, all my files and everything were intact, and nothing had happened at all!!!!
How is this possible??? The bootloader shows "Downloading" and the blue bar while flashing, ODIN shows everything and even says it succeeded, but then how come things on my Phone remains absolutely unchanged??? So then what did it re-flash and where to?? And is there any way to get rid of this memory card problem??
I googled a lot to see if anyone else is experiencing the same problem as mine, but never found anything, which leads me to believe that my device is one weird thing!
Click to expand...
Click to collapse
OMG. I just experienced the EXACT same issue with a Galaxy Exhibit (MetroPCS) SGH-T599. I picked up this phone 2nd hand. It has Philz Touch v6.25 recovery already installed on it. But the phone is stuck in a boot loop. So I decided to flash the stock ROM, a custom ROM via ODIN and later even via flashable zips from the Philz recovery! I even tried to flash TWRP to replace Philz Touch thinking there was something wrong with Philz recovery.
No matter what I did, EVERY TIME, the phone remained in EXACTLY the same state, i.e., with Philz recovery still on there.
I have searched everywhere for the last 3 days including XDA but never found anyone else with the same ODIN flashing issue. Thank goodness I found your post. I'm reading the thread now looking for a solution.
I've noticed a couple other things beneath the surface. When I flashed a CM custom ROM for the phone, the default.prop indicated that there was a new system on the phone (I can access the phone via ADB and look at the files including the system files). It also appears the phone was rooted by the previous owner. Another thing I noticed is that some cases when I tried to install a custom ROM via the custom recovery, the phone would suddenly reboot just at the point the recovery attempts to write the ROM.
Yes, it is clear the phone is good and bricked. But how on earth to unbrick it if ODIN isn't actually changing ANYTHING on the phone and installing a ROM via Philz recovery changes little to nothing either.
CVAngelo said:
OMG. I just experienced the EXACT same issue with a Galaxy Exhibit (MetroPCS) SGH-T599. I picked up this phone 2nd hand. It has Philz Touch v6.25 recovery already installed on it. But the phone is stuck in a boot loop. So I decided to flash the stock ROM, a custom ROM via ODIN and later even via flashable zips from the Philz recovery! I even tried to flash TWRP to replace Philz Touch thinking there was something wrong with Philz recovery.
No matter what I did, EVERY TIME, the phone remained in EXACTLY the same state, i.e., with Philz recovery still on there.
I have searched everywhere for the last 3 days including XDA but never found anyone else with the same ODIN flashing issue. Thank goodness I found your post. I'm reading the thread now looking for a solution.
I've noticed a couple other things beneath the surface. When I flashed a CM custom ROM for the phone, the default.prop indicated that there was a new system on the phone (I can access the phone via ADB and look at the files including the system files). It also appears the phone was rooted by the previous owner. Another thing I noticed is that some cases when I tried to install a custom ROM via the custom recovery, the phone would suddenly reboot just at the point the recovery attempts to write the ROM.
Yes, it is clear the phone is good and bricked. But how on earth to unbrick it if ODIN isn't actually changing ANYTHING on the phone and installing a ROM via Philz recovery changes little to nothing either.
Click to expand...
Click to collapse
Totaly same problem with my Galaxy Note 10.1 (N8010). Tried flash stock ROM over Odin a totaly nothing changed. It is in bootloop everytime with totaly same Marshmallow logo, even if I flash stock ROM which is KitKat... Only sometime it boot to system where it say to me "Encryption unssucessfull" - WTF? i never have password, and when i click on something it just reboot to BootLoop...
I have TWRP recovery on it, but when i want to flash some ROM it flash it but nothing change... Maybe EMMC memory chip is death or I dont know...
Fellas, try on other PC/Laptop or reinstal Windows/Ubuntu whatever you use... That helped me..
Hey everyone, let me start off that I love XDA and I have been using this site for years! So let me give you a little history. I am still on 4.4.4. Recently I finally updated it to 5.0 and retained root, sweet! I also had a custom lollipop recovery that allowed me to go back to 4.4.x. However, I needed the wireless tether function and I could not find a way to get it unlocked without flashing some mod (which would brick my phone) so I used ODIN to flash back to a rootable tar image that I have always used. It was 4.4.2 on NI2 Kernal. Now normally, no matter how many times I ODIN'ed it, flashed it, restore a backup, everything would be up and running in no time. However, lately my phone has not been able to connect to the network completely for some reason. I can make/receive calls and texts. Anything using data though would not work. I called Verizon to see if they could reset something from the back end and they saw me and connected and running. Needless to say, their help ended almost immediately. I am currently running Ricks ROM v19.2 G900VVRU1ANI2 and was only able to connect to data one time a couple of days ago. I had to restart though and when it booted back up, it lost the data again. It does show that I am connected to 4G LTE, strong signal. I have tried the stock ROM 4.4.2, fresh install of Ricks ROM, restore my backup of Ricks Rom (maybe two weeks old), tried Eclipse ROM, nothing seems to be working. I've never submitted anything on here asking for help so this is a first for me cause normally I can fix any problems I create, however, I cannot figure this out for the life of me. Does anyone have any suggestions that I can try? Thanks in advance!
Nic