I've had my Touch Diamond II for a long time and never had any problems with the GPS.
Today I find that when I load any GPS program (Tom Tom etc) the GPS is hit and miss. Most of the time 'No GPS Device' is reported, the rest of the time it says there is a low signal and asks the 'Are you inside a building' question.
Has anyone any thoughts as to why this may suddenly start happening - eg can the GPS receiver suddenly get weaker - as opposed to failing completely.
Thanks for any info offered.
Related
Hi there,
My GPS suddenly stopped working. It used to work fine before, but now when I switch on the TomTom6 application, it says "No GPS Device". 30 seconds later it changes it to "Waiting for a Valid GPS signal".
Did I somehow disable the GPS? I am not that familiar with my P3600 and the TomTom Navigation. Please advice.
Thanks.
Nerses
P.S. Version Information
App Version 6.010 (7720)
GPS Driver v1.20
Map: 'USA_and_Canade'
v665.1293
Language: English US
tomtom will always say "no gps device" when you first fire it up and it'll switch over to "no valid GPS signal," get into clear view of the sky and it'll find a signal.
Done that. Still not working. And it used to work fine a week ago.
Any other ideas?
me too
My GPS (tomtom trinity) is very quirky, too. I opened my GPS icon and set my gps program port to GPD1 and my hardware to COM 9. Worked immediately - then quit for a day - working again today. I don't understand what GPD1 is and I don't know what COM ports my other software and hardware uses - If I saw a listing, I might not understand but it would prob help. Can anyone either tell me appropriate settings if there are any OR tell me how to show what ports are already in use - perhaps I could open other programs then check port usage - anyway thanks for any help
My apologies if this specific question has already been answered - I try to read the whole board but it's hard to keep up.
How many GPS Application u use?
Do you use more than one GPS Application? Make sure there is only one running at a time. Remember: Most applications do not exit if close them. As far as I know if one application uses the GPS Chip of our beloved trinity any second application will wait forever...
Same Here
znerses said:
Hi there,
My GPS suddenly stopped working. It used to work fine before, but now when I switch on the TomTom6 application, it says "No GPS Device". 30 seconds later it changes it to "Waiting for a Valid GPS signal".
Did I somehow disable the GPS? I am not that familiar with my P3600 and the TomTom Navigation. Please advice.
Thanks.
Nerses
P.S. Version Information
App Version 6.010 (7720)
GPS Driver v1.20
Map: 'USA_and_Canade'
v665.1293
Language: English US
Click to expand...
Click to collapse
My GPS worked fine for few weeks but it does not work any more.
Patience!!! I have had GPS fixes in 15 seconds with some ROMS. Currently it takes 15 seconds to move from "No GPS Device" to "Waiting for a Valid GPS signal". If you have this message WAIT - even for 5 minutes. IT WILL WORK.
Tom tom 7 wont lock on to any satellites. I have tried astro gps launcher and others. It shows in Tomtom that it finds satellites but they are not blue like when it locks on, they remain Grey or just don't move at all. Can anyone help me?
Are you using a bluetooth GPS reciever or the internal reciever? I'm not sure if that matters at all but if your satelites arent locking on go to the GPS configuation menu and select whatever option you use (ie internal or external bluetooth) if external bluetooth press select then likely com 2 I would assume.. thats the default setting. Once thats done it should connect shortly after. Sometimes when tomtom starts for me it locks on right away other times it seems to have issues connecting to the receiver. IN order to use the internal gps recevier you have to be running one of the roms thathave activated it. If you havn't (just covering all bases here) then that could be why.. cause your internal gps isnt activated. NOW if it is activated and you still arent locking on make sure you're outside and leave it sitting there for a few minutes. It should lock on as thats what most people have had to do when first getting it to work.
If that doesn't work I'm not sure what else to recommend.
jbatu said:
Tom tom 7 wont lock on to any satellites. I have tried astro gps launcher and others. It shows in Tomtom that it finds satellites but they are not blue like when it locks on, they remain Grey or just don't move at all. Can anyone help me?
Click to expand...
Click to collapse
what rom are you running?
There have been a few roms around here that perform terribly with GPS locks, sometimes requiring a few resets for it to lock properly.
Can you get a lock using Windows Live?
I can say that TomTom7 works fine with astro launcher. The settings in TomTom work both for internal gps, as well as other NMEA gps device: com4, baud 4800.
If you're using the internal GPS antenna in the Vogue after using Astrolauncher and letting tomtom load go to your gps setup in tomtom and then choose "other NMEA GPS reciever", then baud rate 4800... then com 2. That worked for me. Took a few minutes the first time it got a lock. watch the satellite status screen, should say poor GPS or something at first... and you should see grey bars at the bottom where its normally blue when you have a lock. Thats when you know the internal GPS antenna is on.
I have the new gps sprint rom WM6.1 and also tried quick gps and it takes like five to ten minutes to connect
hi guys
just bought the p3470, and already in trouble =)
i tried the tom tom and first it said that there wasn't any gps device available, now it just says that is waiting for a valid gps signal... forever and nothing...
i have a tom tom one in the car and sometimes this happens but not this long and eventually it works, this one doesn't...
Any thoughts?
I appreciate the help.
Thanks
Nuno
internal GPS of our Pharos is really slow : you must wait more than 10 minutes before having a valid GPS signal.
not on mine .. i dont get a gps fix in my house (only if look for a good spot) but its a question of finding the right settngs. or have it automanaged (ive read on orange roms gps is on com9 ...on my rom its on com4 at 4800 baud)
Here's what worked for me.
Download a free GPS program like visualGPSce. Then turn off the External GPS management in settings, and go outside for a nice walk or whatever.
Then, start up visualGPS and walk through the ports until you find something that works (doesn't complain about no communication). In my case it was COM3. I've seen other reports of COM 4, 2, and 9.
Visual GPS will complain right away if there's nothing on the port so you won't waste too much time. Once you find something, turn the microsoft External GPS management back on (I used COM 5 as the software port) and wait. You might also want to install QuickGPS so that it will find satellites faster.
I had to wait ten minutes outside under full sky for it to work, but that was the longest I ever had to wait. Visual GPS has lots of nice bar indicators and the like so you have something to look at while you wonder if your GPS is screwed.
If that doesn't work, you may be in trouble. Go through all the ports again and be patient if it says it can't lock on to satellites.
It now takes me about 1 minute to get lock on (assuming QuickGPS is up to date). It's a little laggy when driving but reasonably useful.
Hey guys, I have always had issues with tomtom getting a sat fix for the longest while. A couple weeks ago when I was messing with tomtom i was like screw this and went to google maps and enabled the use gps feature and got a fix. I then went back to tomtom and my sats came up in 3 seconds or so. Now my question is ... is it a coincidence that my tomtom getting gps fix quickly whenever i use google maps to get a sat. Or is it some kind of internal gps storage thingy ... not sure what I am trying to say.
But still guys with the xperia who been having issues try getting a fix with tomtom and see how long it takes. Close tomtom and use google maps to get a gps location and after u do get yourself on gps, close google maps and go back to tomtom.
Let me know what you get, everytime I tried this it worked for me ... not sure why or what is going on. But tomtom7 takes forever to load up with the x1 compared to google maps.
I just posted on another thread that I think there is an issue with gps on x1. Mine was working super fast on both satnav and google maps and then just stopped working at all. I now have the same problem as another poster that my x1 will not get a lock at all so sending it back for replacement on advice from sonyericsson support.
load up google maps and get a fix then close google maps then load tomtom and see if u get anything then. That works for me.
No. Afraid even google maps doesnt get a lock at all. Tried pairing the phone with a bluetooth gps receiver and all software works perfectly and fast so definately a hardware problem on the phone sadly.
it might be nothing but...
i had a problem with tomtom:
gps nav was working (selected internal gps antenna) but screen was grey, i could see my movement but no calculations.
gps was working in google maps.
--
Problem was: i disabled my phone in comms manager
off: aircraft mode
off: phone
on: bluetooth
on: wifi
tomtom says i'm in aircraft mode, and doesnt show collors, calculations or routes (actually it does show routes but doesnt update it when i change it).
Apologies if this has been asked before, but I have a Android joying headunit and having an issue in regards to satnav. Now I use Google maps and I can set a destination and the app knows my current location but once I'm driving the satnav app doesn't update my location (it still registers me at the initial starting location).
At first I thought could it be a GPS issue, but GPS always seems to know my current location once I start any app that needs my location, the problem only happens once I'm on the move it doesn't update it on the app. So baffled whether its a GPS issue or app issue?
Has anyone had a similar issue or know if a possible resolve?
1-) how many satellites do you see ?
2-) how much takes to the gps to make the "fix position" and with how many satellites ?
If you don't know the answers to the questions, let's do in another mode.
Head Unit connected to the internet (wifi)-> Google Play Store -> apk GPS TEST (download and install)-put in on the gps antenna of the device;
Now open GPS TEST->Settings->AGPS-> "clear and update".
RESTART the hu( not closed and open, RESTART), open GPS TEST and wait; first you'll see 2-3 satellites, but slowly the increase till 20-25 and do the "fix position" with 10-12 satellites.
This operation take about 10-15 minutes, after your radio "catch" the satellitesin 10 seconds.
@nick1964 Thats not the issue, the issue he's describing is totally different. The unit will catch GPS signals and navigation works totally fine with other third party apps (iGo, Sygic, Navigon, etc), but Google Maps has an issue where it will catch your location initially, but once you start navigating it will not update the location in the app. If you switch over to another GPS app or even check the GPS in the SYU settings app, it has full lock. So your troubleshooting steps dont really apply in this case. It's happened to me too, it just randomly started working after some days. I don't mainly use Google Maps so I can't really tell what fixed it.
gamer765 said:
@nick1964 The unit will catch GPS signals and navigation works totally fine with other third party apps (iGo, Sygic, Navigon, etc), but Google Maps has an issue.
Click to expand...
Click to collapse
@gamer765 I have only tested with Google maps, I'll give iGo a try shortly.
If he didn't know what level of satellites signal have, how many satellites see, how do you talk about "that is not an issue"?
Do you know what is GSM triangulation?
Do you understand what is navigation offline and online?
Do you know what is AGPS data and for what is used ?
Hi all I have an update, it seems to be the GPS thats the issue (NOT the apps that use GPS).
Initially I thought it was the GPS only worked at the initial moment when using a app that uses GPS to get my location, but at all the times this happened I was connected using my mobile phones data connection for Internet. I checked the GPS info and its says "no signal" (but the GPS is 100% connected to the headunit, please see attached photo).
Any ideas anyone?
I have this same problem in my new Joying Android 10 HU as well.