Can anybody provide me with the original sysytemui file found in system/apps as I have replaced with the modified without the backup and it is continuosly showing the message that sysui has stopped
Plz
If nobody provides the single systemui.apk you can try to extract it from original firmware by using [WINDOWS][TOOL]Android ICS JB EXT4 ImageFile Unpacker!!! http://forum.xda-developers.com/showthread.php?t=1921399
Make a copy from your extracted i9500MEA firmware and rename .tar.md5 into zip.
Then extract system.img.ext4 an unpack with above-mentioned tool.
AiMwasNeD said:
If nobody provides the single systemui.apk you can try to extract it from original firmware by using [WINDOWS][TOOL]Android ICS JB EXT4 ImageFile Unpacker!!! http://forum.xda-developers.com/showthread.php?t=1921399
Make a copy from your extracted i9500MEA firmware and rename .tar.md5 into zip.
Then extract system.img.ext4 an unpack with above-mentioned tool.
Click to expand...
Click to collapse
Thanks but it would be so easy if somebody kind enough to provide me with the default file
Thanks downloaded the whole new firmware
Related
I dont have access to a linux box and I think in order to flash the latest JMA firmware from samfirmware i need to extract the rfs files in order to load them up via odin...if im completely off please disregard or point me to the correct path..
if any helpful souls out there that wouldnt mind extracting the files and uploading them here?
thanks
Im just a noob trying to flash the latest JMA firmware on my JM6 tab
thanks again..
EDIT - Thank you all for explaining it:
For anyone else presented with the same issue; use the zipped JMA file in odin in the PDA box and the pit file located at the bottom of the samfirm page when flashing the latest JMA firmware.
Eltahur said:
I dont have access to a linux box and I think in order to flash the latest JMA firmware from samfirmware i need to extract the rfs files in order to load them up via odin...if im completely off please disregard or point me to the correct path..
if any helpful souls out there that wouldnt mind extracting the files and uploading them here?
thanks
Im just a noob trying to flash the latest JMA firmware on my JM6 tab
thanks again..
Click to expand...
Click to collapse
Extract them yourself by opening the file with 7Zip or WinZip. They're just archives.
Also - Should be in the General section.
knightnz said:
Extract them yourself by opening the file with 7Zip or WinZip. They're just archives.
Also - Should be in the General section.
Click to expand...
Click to collapse
thanks for the tips. I just installed both winzip and 7zip and could not extract the factory.rfs file with either.....
im guessing I have to extract the factory.rfs file and zip as a tar file for odin right?
Eltahur said:
thanks for the tips. I just installed both winzip and 7zip and could not extract the factory.rfs file with either.....
im guessing I have to extract the factory.rfs file and zip as a tar file for odin right?
Click to expand...
Click to collapse
The file you download is a zip file. Unzip it. There should be a tar file in there, tar is an archive format (similar to the way zip is, only it's uncompressed), so use 7zip or other unarchiving software to untar the file. There will be all of the JMA files including the RFS images contained in the tar file.
maniac3389 said:
The file you download is a zip file. Unzip it. There should be a tar file in there, tar is an archive format (similar to the way zip is, only it's uncompressed), so use 7zip or other unarchiving software to untar the file. There will be all of the JMA files including the RFS images contained in the tar file.
Click to expand...
Click to collapse
I see, so i downloaded a ziped file from samfirmware with the JMA firmware, unziped it down and got the pit file but there were no tar files in there for me to use in odin under the PDA box.
when flashing JMA what file do i put in PDA box? i pressume thats the only file i will use besides the pit file given that i dont want to replace the modem (phone) file...
I'm sorry if this is not making any sense
Eltahur said:
I see, so i downloaded a ziped file from samfirmware with the JMA firmware, unziped it down and got the pit file but there were no tar files in there for me to use in odin under the PDA box.
when flashing JMA what file do i put in PDA box? i pressume thats the only file i will use besides the pit file given that i dont want to replace the modem (phone) file...
I'm sorry if this is not making any sense
Click to expand...
Click to collapse
Go find the thread here that has the JMA firmware, that's where I got mine from
Eltahur said:
I see, so i downloaded a ziped file from samfirmware with the JMA firmware, unziped it down and got the pit file but there were no tar files in there for me to use in odin under the PDA box.
when flashing JMA what file do i put in PDA box? i pressume thats the only file i will use besides the pit file given that i dont want to replace the modem (phone) file...
I'm sorry if this is not making any sense
Click to expand...
Click to collapse
Use the JMA file here on XDA. Extra JMA.tar. Select that file ALONE as PDA. No repartition, PIT, Phone or CSC. It'll update PDA, Phone and CSC automatically.
If it doesn't reboot on its own after flash is complete, reboot into recovery.
You should be upgrading to JMA from JM6.
If you still need to extract/unpackage RFS->
Reffer to my guide here
Cheers
I need stock kernel because the one in my rom use a lot of battery
You can download the firmware and extract the kernel yourself.
I have downloaded the firmware i just dont know how to extract kernel from tar.md5 and it would be convenient if someone can upload it
mahir1010 said:
I have downloaded the firmware i just dont know how to extract kernel from tar.md5 and it would be convenient if someone can upload it
Click to expand...
Click to collapse
Rename tar.md5 file to the tar file, extract it with the WinRar and get the boot.img file.
vndnguyen said:
Rename tar.md5 file to the tar file, extract it with the WinRar and get the boot.img file.
Click to expand...
Click to collapse
thanks so simple...
Please would you help me upload this particular kernel. I'm in dire need of it. Thanks
Hey guys!
So I was just installing S5 Settings from balliboxer
and now I am an idiot to backup the secsettings apk and odex.
After I installed it, it gone FC.
Please somebody have an stock 4.4.2 SecSettings.apk and odex file please?
I'm running on 4.4.2 G7102 NH1.
sorry i don't have nh1 so i can't help you but what about four threads for the same thing , it's not realy serious man if you need help just post one time
if you have a pc :
domload your rom from Sam
http://www.sammobile.com/firmwares/download/36186/G7102XWUBNI2_G7102OLBBNI2_XSE.zip/
--extract it yoy will have G7102XWUBNI2_G7102OLBBNI2_XSE.tar.md5 use 7zip and extract it
--When you have completed extracting all of them, you'll find many files including many .img files. For Apps you need to extract system.img. Unlike normal nandroid backup's system.img file which in yaffs, this stock one in different. So, unyaffs tool can't unpack the system.img
--To extract the system.img, download this tool: sgs2toext4 (created by drphrozen). On extracting it you'll have sgs2toext4.jar file.
--Open a command window and set the directory where you have .jar file.
--Now type sgs2toext4.jar and press enter.
--The .jar will run in a new window & will ask you to drag & drop the system.img file there. Do the same and wait till the process completes.
--When the process completes, you'll find a file named system.ext4.img in the same folder where you had the system.img file.
--Now download ext2reader and install it. Then open the program open your system.img.ext4
--Now navigate in to find the apk you need and extract it copy to your phone
maxx35000 said:
sorry i don't have nh1 so i can't help you but what about four threads for the same thing , it's not realy serious man if you need help just post one time
if you have a pc :
domload your rom from Sam
http://www.sammobile.com/firmwares/download/36186/G7102XWUBNI2_G7102OLBBNI2_XSE.zip/
--extract it yoy will have G7102XWUBNI2_G7102OLBBNI2_XSE.tar.md5 use 7zip and extract it
--When you have completed extracting all of them, you'll find many files including many .img files. For Apps you need to extract system.img. Unlike normal nandroid backup's system.img file which in yaffs, this stock one in different. So, unyaffs tool can't unpack the system.img
--To extract the system.img, download this tool: sgs2toext4 (created by drphrozen). On extracting it you'll have sgs2toext4.jar file.
--Open a command window and set the directory where you have .jar file.
--Now type sgs2toext4.jar and press enter.
--The .jar will run in a new window & will ask you to drag & drop the system.img file there. Do the same and wait till the process completes.
--When the process completes, you'll find a file named system.ext4.img in the same folder where you had the system.img file.
--Now download ext2reader and install it. Then open the program open your system.img.ext4
--Now navigate in to find the apk you need and extract it copy to your phone
Click to expand...
Click to collapse
Thanks dude! And sorry for those 4 threads. Gonna download it!
This will take soooooo long! My Internet connection is slow and can complete in 9-10 hours!
Just be patient and people will see your thread and help you! But making FOUR posts...?
maxx35000 said:
sorry i don't have nh1 so i can't help you but what about four threads for the same thing , it's not realy serious man if you need help just post one time
if you have a pc :
domload your rom from Sam
http://www.sammobile.com/firmwares/download/36186/G7102XWUBNI2_G7102OLBBNI2_XSE.zip/
--extract it yoy will have G7102XWUBNI2_G7102OLBBNI2_XSE.tar.md5 use 7zip and extract it
--When you have completed extracting all of them, you'll find many files including many .img files. For Apps you need to extract system.img. Unlike normal nandroid backup's system.img file which in yaffs, this stock one in different. So, unyaffs tool can't unpack the system.img
--To extract the system.img, download this tool: sgs2toext4 (created by drphrozen). On extracting it you'll have sgs2toext4.jar file.
--Open a command window and set the directory where you have .jar file.
--Now type sgs2toext4.jar and press enter.
--The .jar will run in a new window & will ask you to drag & drop the system.img file there. Do the same and wait till the process completes.
--When the process completes, you'll find a file named system.ext4.img in the same folder where you had the system.img file.
--Now download ext2reader and install it. Then open the program open your system.img.ext4
--Now navigate in to find the apk you need and extract it copy to your phone
Click to expand...
Click to collapse
Unfortunately this doesn't work. When you drop the system.img.ext4 file onto the sgs2ext4 tool, no file is produced. The tool just keeps endlessly repeating:
"system.img.ext4 32 B 0 B/s"
I think that tool is too old (2.5 years old) and doesn't support the newest Samsung firmwares.
siraltus said:
Unfortunately this doesn't work. When you drop the system.img.ext4 file onto the sgs2ext4 tool, no file is produced. The tool just keeps endlessly repeating:
"system.img.ext4 32 B 0 B/s"
I think that tool is too old (2.5 years old) and doesn't support the newest Samsung firmwares.
Click to expand...
Click to collapse
witch firmware do you want to extract ?and whitch file you want ?
i 've extract my latest firmware 09/2014 so it work fine for me
maxx35000 said:
witch firmware do you want to extract ?and whitch file you want ?
i 've extract my latest firmware 09/2014 so it work fine for me
Click to expand...
Click to collapse
The T-Mobile Galaxy Note 4 (SM-N910T) NK4 firmware. I can't find any instructions online on extracting Samsung firmwares other than these, which were originally written up by rwilco12 a long time ago and reposted endlessly.
siraltus said:
The T-Mobile Galaxy Note 4 (SM-N910T) NK4 firmware. I can't find any instructions online on extracting Samsung firmwares other than these, which were originally written up by rwilco12 a long time ago and reposted endlessly.
Click to expand...
Click to collapse
you have one solution try to extract md5 file
and direct mount system.img in ubunt it work for me then copy the file you want
maxx35000 said:
you have one solution try to extract md5 file
and direct mount system.img in ubunt it work for me then copy the file you want
Click to expand...
Click to collapse
I'll try doing that in a Linux VM. I'm on Windows and the Diskinternals Linux Reader keeps saying the filesystem is invalid.
siraltus said:
I'll try doing that in a Linux VM. I'm on Windows and the Diskinternals Linux Reader keeps saying the filesystem is invalid.
Click to expand...
Click to collapse
give me a link to download the system.img i try to extract it
maxx35000 said:
give me a link to download the system.img i try to extract it
Click to expand...
Click to collapse
Thank you for your help. It's this firmware: http://www.sammobile.com/firmwares/download/39224/N910TUVU1ANK4_N910TTMB1ANK4_TMB.zip/
Anything? Is this a no-go?
siraltus said:
Thank you for your help. It's this firmware: http://www.sammobile.com/firmwares/download/39224/N910TUVU1ANK4_N910TTMB1ANK4_TMB.zip/
Click to expand...
Click to collapse
sorry i have forget to do it i download the file now
but what the files needed in ?
maxx35000 said:
sorry i have forget to do it i download the file now
but what the files needed in ?
Click to expand...
Click to collapse
I just want to find a method that works for extracting the Note 4 firmware because none I found online work.
siraltus said:
I just want to find a method that works for extracting the Note 4 firmware because none I found online work.
Click to expand...
Click to collapse
I found that the Linux method works on my Mac. Took a ton of tinkering and restarting the emulator on my machine.
sgs2ext4.jar did not work for me in Windows. It just hangs.
sbrownla said:
I found that the Linux method works on my Mac. Took a ton of tinkering and restarting the emulator on my machine.
sgs2ext4.jar did not work for me in Windows. It just hangs.
Click to expand...
Click to collapse
yes sgs2ext4.jar work with some of system.img but not all but you can mount in linux i have extracted note 4 img :good:
maxx35000 said:
give me a link to download the system.img i try to extract it
Click to expand...
Click to collapse
The SAMMOBILE firmware or the system.img? I'm not yet downloading it. Let's see if I can resume the download.
we are planning to make our first custom rom. i need someone that can convert a tar file to zip. so i can edit the sytem file.
i need it for SM-G935F
Winzip can extract the tar after which you can create a zip of the extracted files
Many people find this issue while flashing stock frimware via Odin That after system.img is done Odin gets failed so I came up with a fix.
1) On pc open the firmware with winrar (or any other software like 7zip)
2)Then extarct the file named hidden.img from it to any place.
3) Rename the hidden.img file as hidden.img.tar . 4)Reflash the frimware through odin
5)You will get failed again but now flash the hidden.img.tar with odin now it will be successful and your phone will boot.
If the problem is still there or anyone needs to ask something qoute this post and not the whole first post (please)
@naimrlet mention this in the master thread too
This problem also occurs when you are flashing a different stock frimware for same device (e.g. different country firmware for same device) like people flashing aol1 for g531h to make s6/j7 mod by @ERICKONIX, work. This fix will also work that case too
waleeds1 said:
3) Rename the hidden.img file as hidden.img.tar
Click to expand...
Click to collapse
Doing this is the same as not flashing the Hidden partition. You can't just rename it, you need to tar it. Just use 7-zip for it
fabiossilva21 said:
Doing this is the same as not flashing the Hidden partition. You can't just rename it, you need to tar it. Just use 7-zip for it
Click to expand...
Click to collapse
No it involves flashing the hidden because if you rename with the extension it becomes tar. But sometimes you need to turn an option on the pc to see the extension but to know that it became tar when you rename it, the icon changes from winrar to the icon associated with tar files
fabiossilva21 said:
Doing this is the same as not flashing the Hidden partition. You can't just rename it, you need to tar it. Just use 7-zip for it
Click to expand...
Click to collapse
Nah no need to tar it just rename