I use this ROM
RUU_Elf_HTC_WWE_1.11.405.1B_4.1.13.42_02.93.90_Ship
Tell me how to fix the problem. The sticker on the back write the original, with the command * # 06 # and the phone is visible false
Hi
You can't "fix" the problem, use this tool to know your Imei http://forum.xda-developers.com/showthread.php?t=418892 and if it's different from the sticker then someone must have fiddled with it...
Same with the program and stickers! Only Windows Mobile and the code appears IMEI, which non-compliant
Hello all,
as title today flashed my phone to get new 7.8 dynamic rom
flash goes well
but after hard reset the phone shows invalid sim card
and imei shows 000000000 (code *#06#)
any idea?
i found a guide here to use QPST but is for samsung SIII
and the 8700 have different engineering menu code...
Please save me ((
***SOLVED***
the solution is app diagnosis
enter in diagnosis dialling the code ##634##
then *#7284#
and select
Modem, Usb Diag
restart the phone and follow the guide here
thanks to Hero for the guide
This may be little bit nooby but discussing on flashing imei's is not a bit illegal-ish? It's not like jailbreaking or any kind of alteration don't you think?
i think so,
in fact i posted a link and not the entire guide
... in any case, it's not so easy to change the imei on your phone and make it functionally.
you need an imei code there is not in use in your country by another phone
and an imei phone a phone like yours according with product type.
there is a function called:
"auto provisioning"
you see you receive, with some carriers, automatic mms and internet configuration at first access?
gsm cell identify and decrpt your imei and give this info to carrier.
hope this can helps
1 .restore your original partition
2 .update with official 2.3.5(some phone will be lost imei)
3 .dial *#*#2846579#*#*
4 .background settings- qualcomm background settings-open-password 0 confirm
5 .usb port settings manufactor mode , and restart the phone
6 .turn on usb debugging and connect to pc
7 .run DFS , select port db adapter (downloadfrom attached files)
8 .click on spc
9 .click on pragramming tab
10.if you lost your imei type and write imei(check attached files)
11.check your current wifi-mac address
12.and type it in the mac address box
13.write after successfull close and reopen the dfs and connect again
14.click on read button (nearly to mac address)
15.mac address will show automatically
16. now root and flash any rom wifi will work :good:
thanks for your help:good:
with this new DFS-tool{old one 3.3 cannot restore mac} i managed to restore my mac address and also the serial number!:highfive:
RajuMon said:
1 .restore your original partition
2 .update with official 2.3.5(some phone will be lost imei)
3 .dial *#*#2846579#*#*
4 .background settings- qualcomm background settings-open-password 0 confirm
5 .usb port settings manufactor mode , and restart the phone
6 .turn on usb debugging and connect to pc
7 .run DFS , select port db adapter (downloadfrom attached files)
8 .click on spc
9 .click on pragramming tab
10.if you lost your imei type and write imei(check attached files)
11.check your current wifi-mac address
12.and type it in the mac address box
13.write after successfull close and reopen the dfs and connect again
14.click on read button (nearly to mac address)
15.mac address will show automatically
16. now root and flash any rom wifi will work :good:
Click to expand...
Click to collapse
Didn't work for me. Actually there is no field for mac address change. Please help me...
check
avi062 said:
Didn't work for me. Actually there is no field for mac address change. Please help me...
Click to expand...
Click to collapse
can you connect the phone to dfs tool
Not working with ICS AuroraSP
There is no background setting in ICS AuroraSP.
So after dialing *#*#2846579#*#* nothing happens.
its only on official GB .update your Phone with official update
download link here(http://consumer.huawei.com/en/support/products/downloads/detail/u8800-en.htm?id=13396)
Sorry but this cdma tool is 3.1 and there is no mac adress field... can you send me the 3.3 or somehting?
nick#18 said:
Sorry but this cdma tool is 3.1 and there is no mac adress field... can you send me the 3.3 or somehting?
Click to expand...
Click to collapse
I have to confirm: the attached file brings a tool 3.1 - no MAC option for my device...
android_paul said:
I have to confirm: the attached file brings a tool 3.1 - no MAC option for my device...
Click to expand...
Click to collapse
The demo version from here should do the trick too (worked on U8860).
http://cdmatool.com/download
Blefish said:
The demo version from here should do the trick too (worked on U8860).
http://cdmatool.com/download
Click to expand...
Click to collapse
Hi
Tried both DFS.exe and DFS demo. I can see the updated IMEI on the device but the phone still doesn't show updated wifi
any suggestions
Thanks for helping on the IMEI part
mohammad.nomaan said:
Hi
Tried both DFS.exe and DFS demo. I can see the updated IMEI on the device but the phone still doesn't show updated wifi
any suggestions
Thanks for helping on the IMEI part
Click to expand...
Click to collapse
Try switching the OTP NV filters on/off etc. I had similar issue on U8860 and somehow I was able to write all the info back eventually. I don't remember what I specifically changed though. Great to know IMEI is back though!
Blefish said:
Try switching the OTP NV filters on/off etc. I had similar issue on U8860 and somehow I was able to write all the info back eventually. I don't remember what I specifically changed though. Great to know IMEI is back though!
Click to expand...
Click to collapse
Thanks Blefish,
The IMEI is back as I wanted
I tried that option as well. As you can see on the screenshot, I see the WiFi keys in the application as before but the same does not show on my device.
Tried both OTP NV Enable & Disable but still the same result.
If you recommend, ill flash the official update again if that can bring back the wifi keys or else ill leave it as it coz your Ideos Setting app does have that option and you I hope we will have it in CM12 as well
EDIT
DFS Demo helped in ficing WiFi keys. NV option helps as Blefish pointed out
Now all if fine - IMEI & WIFI
thanks a lot for your help and assistance
Blefish said:
Try switching the OTP NV filters on/off etc. I had similar issue on U8860 and somehow I was able to write all the info back eventually. I don't remember what I specifically changed though. Great to know IMEI is back though!
Click to expand...
Click to collapse
Hi Blefish, I would like to know if your SN is correct (in settings) after using DFS.
On my Honor I have everyting OK only when I restore it via 5iromtoolbox, but I cant flash any rom except B939 after that :crying:
I wonder if you have SN the same as MAC in settings, too
JekaPinsk said:
Hi Blefish, I would like to know if your SN is correct (in settings) after using DFS.
On my Honor I have everyting OK only when I restore it via 5iromtoolbox, but I cant flash any rom except B939 after that :crying:
I wonder if you have SN the same as MAC in settings, too
Click to expand...
Click to collapse
In my U8800 everything is ok, however, U8860 had zero imei and zero BT/MAC address (which was set to a random one). The serial number shown in the projectmenu tool (Huawei firmware stock) shows correct serial number (the 16 digit one, same as on the phone behind the battery).
In U8800pro/U8860 ICS release, Huawei is using the Settings->Status serial number same as MAC address. If the serial number shows unknown, MAC addresses are incorrect too.
Blefish said:
In U8800pro/U8860 ICS release, Huawei is using the Settings->Status serial number same as MAC address. If the serial number shows unknown, MAC addresses are incorrect too.
Click to expand...
Click to collapse
On B919 my MAC was ok bun SN was unknown
JekaPinsk said:
On B919 my MAC was ok bun SN was unknown
Click to expand...
Click to collapse
BT MAC aswell? I don't remember which one it used.
Blefish said:
BT MAC aswell? I don't remember which one it used.
Click to expand...
Click to collapse
Yes. Until I made changes to BT MAC it showed nothing, but now I have it working.
PS: Why new branches?
JekaPinsk said:
Yes. Until I made changes to BT MAC it showed nothing, but now I have it working.
PS: Why new branches?
Click to expand...
Click to collapse
For TWRP (and maybe more) .
Hello guys,
my U8800-51 is on the latest LegacyHuawei CyanogenMod 11.0 by Mr Blefish but i ended up without no WIFI MAC and BLuetooth. So i tried as stated on this post to downgrade to android 2.3 but when it gets to part 2/2 of the installation, gives me an error... Then, i proceeded to use DFS v14 to try to write the MAC adress (still on CyanogenMod) but it failed to find the COM PORT through PC (ADB install correct and showing the device, USB debuggin enable). The only way i managed to see the port in the device manager and DFS is tu putting the phone on the PINK SCREEN (Download mode, right?). but, DFS throw me some errors like CPS_BPSR and so on.
I also tried enabling DIAG port through ADB but didn't work.
So far, it has failed... But maybe you can help me.
I understand this is a very old phone, but i live in a 3rd world country where phones are ver expensive (not to mention an Hyperinflation process that we are living through). So, i have to try everything to save it.
Thanks in advance for you help
Regards
I have flashed the Lenovo Ideab A3000-H Call - A3000_A422_011_022_140127_WW_CALL_FUSE firmware. I am now trying to open the wifi but the Mac Address is Unavailable and the IMEI is invalid. I can restore the IMEI Numbers by restoring the NVram folder I had a backup before.
Anyone had a problem like this before after flashing? Is it possible to be a driver problem or just Damaged hardware?
Thanks
you may have formated your device...
try this: http://forum.xda-developers.com/lenovo-a3000/help/restore-nvram-format-using-spflash-t3064995
I unlocked bootloader with unlock.key found in internet but it changed my serial number. I want to get my original serial number. how to find it? please help me
You should remember your SN, hex-edit deviceinfo.img, replace the SN inside the deviceinfo.img with your SN, save, and flash the file