Related
Hello, I have an EU HD2 running Hyperdoid 2.1.0, but I've had this problem no matter which rom I tried and I'm at my wits' end trying to solve it.
When I connect to WPA wifi routers, the connection starts out fine, but after a short while my connection to the router seems to get cut off. The delay before this happens could be seconds or it could be 1 or two minutes and seems to depend on the amount of data passing over the interface - when I view a streaming video for example, I get disconnected almost immediately, when I browse pages with few graphics it lasts a bit more. I tried this with 3 or 4 different routers with identical results.
Notwithstanding that no data is getting through, the phone still indicates that I am connected to the wifi router and when I ping the router it gives me a "no route to host". WEP and open networks work fine, so I had to change my home network to WEP, but I'm not conforable with it due to security concerns. I also have problems connecting to public wifi ap's because they are usually secured by WPA.
I suspect that this is related to the wpa_supplicant supplied with tytung's kernel, but I really have no way of knowing what's going on and I haven't been able to find anything in the logs.
Can anybody give me a hand with this? Solving this problem would make the hd2 the perfect phone for me.
please post this in the Q&A section NOT the dev section
i do not suffer from these issues and my router is wpa2 secured
white-energy said:
The problem in this world is... FLAMING coming from people that are kinda stupid to help.. no offense as i haven't mentioned any of you.. I just can't understand, none of those flamers are mods/devs.. maybe i can say trolls since its a hobby..
Well i might help, i remember such a question before and i think i know the solution of WIFI connection disappearance.. there's an application (which you can find it in market) that survive's or something your WiFi connection.. i'll try searching it and if i find it.. i'll post the link..
Good luck with those flamers =)
Click to expand...
Click to collapse
Thanks white-energy. I use wifi fixer when I need to connect to a wpa network, but it's a less than satisfactory solution because it doesn't stop the connection from dropping - it just reconnects automatically. That means that I can browse almost normally, but streaming video or downloading is still almost impossible.
If you know of better software I would be very much obliged.
etibon said:
Hello, I have an EU HD2 running Hyperdoid 2.1.0, but I've had this problem no matter which rom I tried and I'm at my wits' end trying to solve it.
When I connect to WPA wifi routers, the connection starts out fine, but after a short while my connection to the router seems to get cut off. The delay before this happens could be seconds or it could be 1 or two minutes and seems to depend on the amount of data passing over the interface - when I view a streaming video for example, I get disconnected almost immediately, when I browse pages with few graphics it lasts a bit more. I tried this with 3 or 4 different routers with identical results.
Notwithstanding that no data is getting through, the phone still indicates that I am connected to the wifi router and when I ping the router it gives me a "no route to host". WEP and open networks work fine, so I had to change my home network to WEP, but I'm not conforable with it due to security concerns. I also have problems connecting to public wifi ap's because they are usually secured by WPA.
I suspect that this is related to the wpa_supplicant supplied with tytung's kernel, but I really have no way of knowing what's going on and I haven't been able to find anything in the logs.
Can anybody give me a hand with this? Solving this problem would make the hd2 the perfect phone for me.
Click to expand...
Click to collapse
While I agree that this the wrong forum, should be moved to the right forum et all, here is my $0.02
Have you tried Tytung's NexusHD2 build (not just the kernel)? try 2.8 or 2.9, in my experience his implementation is the most reliable. So reliable that I use the Wifi/BT drivers and related files in my CM7 nightly build. And it works like a charm.
If you are having troubles even in his ROM, something else is wrong. Top of my head, try a different radio. I toggle between 2.12 and 2.15, both with varying degrees of reliability.
ph03n!x said:
While I agree that this the wrong forum, should be moved to the right forum et all, here is my $0.02
Have you tried Tytung's NexusHD2 build (not just the kernel)? try 2.8 or 2.9, in my experience his implementation is the most reliable. So reliable that I use the Wifi/BT drivers and related files in my CM7 nightly build. And it works like a charm.
If you are having troubles even in his ROM, something else is wrong. Top of my head, try a different radio. I toggle between 2.12 and 2.15, both with varying degrees of reliability.
Click to expand...
Click to collapse
Hi ph03n!x,
Thanks for the tips. I haven't tried NexusHD2 because I like the cm7 mods. But I will presently, just to make sure. I'll also try switching radios.
Well.. i guess i have found it... here
It looks like it has some special things.
etibon said:
Hi ph03n!x,
Thanks for the tips. I haven't tried NexusHD2 because I like the cm7 mods. But I will presently, just to make sure. I'll also try switching radios.
Click to expand...
Click to collapse
Give NexusHD2 a shot just to find the Wifi stability.
You can try the latest of the CM7 nightlies released by Arif Ali, along with Tytung's kernel (available in his thread).
I can upload my custom CM7 build based on Arif Ali's CM7 nightlies with Tytung's Kernel and Wifi/ BT drivers and related files somewhere, but am a cLK user. And of course I will have to remove my paid apps from it before sharing
white-energy said:
Well.. i guess i have found it... here
It looks like it has some special things.
Click to expand...
Click to collapse
Hi white-energy. I gave it a test drive but no luck. This software seems to be intended to maintain wifi while the Device is sleeping, but this problem I have occurs while the device is being used. Thanks anyway for your help!
Sent from my HD2 using Tapatalk
ph03n!x said:
While I agree that this the wrong forum, should be moved to the right forum et all, here is my $0.02
Have you tried Tytung's NexusHD2 build (not just the kernel)? try 2.8 or 2.9, in my experience his implementation is the most reliable. So reliable that I use the Wifi/BT drivers and related files in my CM7 nightly build. And it works like a charm.
If you are having troubles even in his ROM, something else is wrong. Top of my head, try a different radio. I toggle between 2.12 and 2.15, both with varying degrees of reliability.
Click to expand...
Click to collapse
I'm about to switch the radio. Let you know what happens .
Sent from my HD2 using Tapatalk
Ok, so I tried switching radio to .12 - no joy. I also tried Tytung's NexusHD2, but it does exactly the same thing.
I don't know what else to try. If there weren't other people with this problem, I would suspect that my phone is defective, but would that make sense given that open networks and wep networks work fine??
Hi i have very slow wifi on my u8800. I use Aurora ICS 4.03 Version 1.6. I have wipe when I install the ROM. I tried to download wifianalyser from market and it isent finished after 10 min (500k file). If I send a 1 mb file with wifi file explore it takes 5-10 min. Anybody know what the problem is?
Having the same problem..
Tried to flash an older stock .35 kernel ROM, and then Aurora ICS, but did not help.. Wonder what the problem is.. Doe's not seem like other people have wifi issues..
Running Aurora ICS 1.11
Yeap, mine too extremely slow to a point that it says that the connection has timed out. Lets hope its an easy fix for dzo because I can understand the man works hard to keep the updates rolling day after day.
Testing wifi at my parents house, on a d-link DIR-615, and it works like a charm..
Wonder why it wont work on the other ones i have tried..
bcus our wifi card is a cheap piece of sheat
it doesnt work on all modems and even if it works its not fast at all
Slow wifi
Hi, is there any solution to the slow wifi problem yet? Also, my wifi doesnt always disconnect so its doesnt auto switch to 3G/HSPA when I leave the hostspot area. Its almost as if it stays conected even if the hotspot is not broadcasting. I read in on the forum somewhere there are files you can try restore too check if its better but I cant seem to find the post now.
Thanks
kllr123 said:
Hi, is there any solution to the slow wifi problem yet? Also, my wifi doesnt always disconnect so its doesnt auto switch to 3G/HSPA when I leave the hostspot area. Its almost as if it stays conected even if the hotspot is not broadcasting. I read in on the forum somewhere there are files you can try restore too check if its better but I cant seem to find the post now.
Thanks
Click to expand...
Click to collapse
There´s a wlan configuration file for ICS Aurora.
http://forum.xda-developers.com/showpost.php?p=24412002&postcount=3379
kehoone said:
There´s a wlan configuration file for ICS Aurora.
http://forum.xda-developers.com/showpost.php?p=24412002&postcount=3379
Click to expand...
Click to collapse
Cheers. This lil patch helped me out. Wifi is running now, was about 200k before, now it is about 18.000k!
Has anoyone else trouble with wifi and cm10? I can't download more than a few mb. then the connection stalls, and I have to manually disconnect and reconnect to get it working again. I'm using a m252 with green lense as phone and a fritzbox 7390 as wifi router.
I forgot: Wifi in CM9 worked without problems...
desperadoduck said:
I forgot: Wifi in CM9 worked without problems...
Click to expand...
Click to collapse
I have the same problem, but also on stock defy, CM7 but under CM10 it occures more often. (Defy green lens)
I had trouble with a virgin media hub, but a sky one works fine. If the hub has a connect button try connecting that way instead of via entering key and it might work, did for me
Sent from the real world by hacking into the matrix
hey,
yeah I had exactly the same problem as the OP described. Initially I couldn't get the wifi to connect at all, got stuck on 'obtaining IP address'. I had to cancel my wifi wpa2 security and put it back on later to resolve that issue.
(If it helps anyone - I tried out cm10 for a few days, but ran into wifi problems, rockplayer didn't work (that is supposed to be resolved by now), and couldn't get the samba share to work. So I'm switching back to cm7.2 for a little longer. cm10 looks great and it never crashed on me so I'm very impressed, and actually donated AGAIN to the developers
Just for the record, here are the results of some experiments I did:
* full wipe: didn't help
* connect via wps: didn't help
* disabled wp on routers: didn't help
* switched from wpa2 to wpa: didn't help
* disabled disconnect on bad connection: didn't help
* switched back to cm9: everything works fine
so I guess I'm stuck for now... :-/
desperadoduck said:
Just for the record, here are the results of some experiments I did:
* full wipe: didn't help
* connect via wps: didn't help
* disabled wp on routers: didn't help
* switched from wpa2 to wpa: didn't help
* disabled disconnect on bad connection: didn't help
* switched back to cm9: everything works fine
so I guess I'm stuck for now... :-/
Click to expand...
Click to collapse
08/08 quarx build everything seems fine, could try it
@non4 said:
08/08 quarx build everything seems fine, could try it
Click to expand...
Click to collapse
I get the message 'Authentication problem' on my Defy running 08/08 quarx installed this morning.
I've tried restarting the Thomson router but nothing changes. Wifi worked fine on C7.1 but I must admit I didn't check it on the C10 04/08 build.
My 3G connection is pretty good so I have no plans to uninstall and will double check at the weekend, where I can get access to a BT Homehub.
brunc said:
I get the message 'Authentication problem' on my Defy running 08/08 quarx installed this morning.
I've tried restarting the Thomson router but nothing changes. Wifi worked fine on C7.1 but I must admit I didn't check it on the C10 04/08 build.
My 3G connection is pretty good so I have no plans to uninstall and will double check at the weekend, where I can get access to a BT Homehub.
Click to expand...
Click to collapse
Never even heard of a Thompson one. All I've tried (and all working) are BT, Sky and Virgin.
@non4 said:
08/08 quarx build everything seems fine, could try it
Click to expand...
Click to collapse
I'm using it ( CM10 08/08 quarx) too, but I have the same wifi problems (shows the phone connected to the wifi but the internet is stopped).
As far as I can see, they (stock, CM, MIUI, WIUI) work differently on each phone.
Regards,
wurealm said:
I'm using it ( CM10 08/08 quarx) too, but I have the same wifi problems (shows the phone connected to the wifi but the internet is stopped).
As far as I can see, they (stock, CM, MIUI, WIUI) work differently on each phone.
Regards,
Click to expand...
Click to collapse
Interesting.
For the record my router is the Thomson TG585 v8 - it gets pretty mixed reviews and can clearly be bettered so perhaps I should upgrade it. I'll report on Saturday how I get on with the BT Homehub.
Also for the record the 08/08 build runs more smoothly than the 04/08 build - very nice!
I encountered some problems (disconnecting from time to time while device is not moved) but the scan connect speed increased compared to CM9. Also switching WiFi on/off is much more faster now. Very convinient when choosing between different WLANs.
me too...
This is so troubble
RPHJR said:
This is so troubble
Click to expand...
Click to collapse
I see the 08/08 build has been replaced entirely by 10/08... let's see what that brings!
Wifi using BT homehub seemed to work OK - installed 10/08 and is fine too... good upgrade!
Sent from my MB525 using xda app-developers app
wifi resolved
I was same problem with wifi data connectivity. After some MB dropped the the connection. (tplink wifi router). Switched the wifi speed from 300 mbps to 54 mbps. After this the wifi worked normaly, no dropped data connection, and download speed is over 10 mbps, and the upload speed is over too 10 mbps.
Defy MB525 red lens GB kernel 12.08-nightly
Sorry my bad english
Same problem here on CM10-20120812-NIGHTLY-mb525.zip with MB525 green lense. After a while wifi has no more internet connection, but device connection is shown properly on phone and AP. Switching wifi OFF/ON on phone helps.
Temporary fix, I have trouble with virgin media routers. Connect via wps button on the hub, it works, takes a while to connect but at least it works, I get authentication error when using password
macrobbi said:
Same problem here on CM10-20120812-NIGHTLY-mb525.zip with MB525 green lense. After a while wifi has no more internet connection, but device connection is shown properly on phone and AP. Switching wifi OFF/ON on phone helps.
Click to expand...
Click to collapse
The Wi-Fi ON/OFF switching helps too and is easier/quicker than the phone switching
wurealm said:
The Wi-Fi ON/OFF switching helps too and is easier/quicker than the phone switching
Click to expand...
Click to collapse
Temporary solution
Before connecting to wifi try disable mobile connections, then turn it on after
Someone please help me out of this ! Have been trying to correct it for a while! Nothing seems to work out for me. Thought of posting it on XDA. I hope u guys help me asap... \\\\first time on XDA/////
So the problem is: I have an android phone MOTOROLA FIRE XT530. I have got wifi , belkin router in my home , which i use to connect my laptop and cell phone to browse on internet! There is no problem in browsing from laptop indicating there is no problem with my wifi settings or anythng related to wifi!
BUT, on my phone, when i turn wifi 'ON' , the wifi works for 2-3 minutes then it automatically disconnects and then instantly reconnects itself! I dont really have problem with this thng but the other day i was upgrading my swype to swype beta and had to download this application but the app is too large sized that in the middle of the downloading my wifi went off thereby stopping the download(n sadly its non resumable). I am a huge fan of swype and have been using it for quite a while now. I want it upgraded at any cost!
I know this wifi turn on/off problem is faced by many but this is quite a headache nw! I have come to know about 'POWER SAVING MODE' n stuff, but sadly i can't even get to that menu coz i dont know how to!
Someone plz plz plz , help me as i am stuck with it from a long tym nw! anticipating early n useful replys :fingers-crossed:
-Sid:good:
bballer_sid said:
Someone please help me out of this ! Have been trying to correct it for a while! Nothing seems to work out for me. Thought of posting it on XDA. I hope u guys help me asap... \\\\first time on XDA/////
So the problem is: I have an android phone MOTOROLA FIRE XT530. I have got wifi , belkin router in my home , which i use to connect my laptop and cell phone to browse on internet! There is no problem in browsing from laptop indicating there is no problem with my wifi settings or anythng related to wifi!
BUT, on my phone, when i turn wifi 'ON' , the wifi works for 2-3 minutes then it automatically disconnects and then instantly reconnects itself! I dont really have problem with this thng but the other day i was upgrading my swype to swype beta and had to download this application but the app is too large sized that in the middle of the downloading my wifi went off thereby stopping the download(n sadly its non resumable). I am a huge fan of swype and have been using it for quite a while now. I want it upgraded at any cost!
I know this wifi turn on/off problem is faced by many but this is quite a headache nw! I have come to know about 'POWER SAVING MODE' n stuff, but sadly i can't even get to that menu coz i dont know how to!
Someone plz plz plz , help me as i am stuck with it from a long tym nw! anticipating early n useful replys :fingers-crossed:
-Sid:good:
Click to expand...
Click to collapse
Open app drawer>>Settings>>Wireless and Network>>Wi-Fi settings>>(now tap first soft key to see options)>>select advanced.
Now just tap on Wi-Fi sleep than tap on "Never"
Actually as the screen turns off wifi too turns off with that.
Hope it fixes your issue.
Sent from my XT530 using xda app-developers app
aweosomeabhijeet said:
Open app drawer>>Settings>>Wireless and Network>>Wi-Fi settings>>(now tap first soft key to see options)>>select advanced.
Now just tap on Wi-Fi sleep than tap on "Never"
Actually as the screen turns off wifi too turns off with that.
Hope it fixes your issue.
Sent from my XT530 using xda app-developers app
Click to expand...
Click to collapse
Thnx for ur response but I knew this thing and my setting is already set to never! still the problem presists!
bballer_sid said:
Thnx for ur response but I knew this thing and my setting is already set to never! still the problem presists!
Click to expand...
Click to collapse
Try data reset. If that doesn't work, the issue is with router.
Sent from my XT530 using xda app-developers app
aweosomeabhijeet said:
Try data reset. If that doesn't work, the issue is with router.
Click to expand...
Click to collapse
Sometimes I too have similar problem with my xperia. But the problem disappear after rebooting the phone and/or router.
I think it related to your phone's uptime. As the more the uptime, the memory tends to be fragmented and it has impact to wifi drivers (?).
it happens regardless of the never option
aweosomeabhijeet said:
Try data reset. If that doesn't work, the issue is with router.
Sent from my XT530 using xda app-developers app
Click to expand...
Click to collapse
Hey I'm a noob but I have been having the same issue, When I initially got the phone there was no issue I have a Netgear router at home which uses wireless G, my dad bought me a wireless n router, belkin to be exact and i have notices that the wifi drops ever so often. My wifi settings is also set to never.
dougieescobar said:
Hey I'm a noob but I have been having the same issue, When I initially got the phone there was no issue I have a Netgear router at home which uses wireless G, my dad bought me a wireless n router, belkin to be exact and i have notices that the wifi drops ever so often. My wifi settings is also set to never.
Click to expand...
Click to collapse
hey mate, plz hit me up if u solve this issue! I dont want a factory reset.. Backing up all data is itself a pain in the butt! :\
Reply
bballer_sid said:
hey mate, plz hit me up if u solve this issue! I dont want a factory reset.. Backing up all data is itself a pain in the butt! :\
Click to expand...
Click to collapse
I think the issue is with wireless N and if you have a belking router it may be an issue ...dumb ur router down to only b/g and this should change the outcome
dougieescobar said:
I think the issue is with wireless N and if you have a belking router it may be an issue ...dumb ur router down to only b/g and this should change the outcome
Click to expand...
Click to collapse
i agree with him, but if u use your computer to connect to wifi and that is ok / normaly
i think the problem is in your handled...
anto2k said:
i agree with him, but if u use your computer to connect to wifi and that is ok / normaly
i think the problem is in your handled...
Click to expand...
Click to collapse
yap.. and probably it's because the hardware problem.. have you tried to connect to another router wifi?
dragonov88 said:
yap.. and probably it's because the hardware problem.. have you tried to connect to another router wifi?
Click to expand...
Click to collapse
bro, i didn't connect my phone to any router oder than mine. But, i work on my pc with the same belkin router. No issues come up with that. Are u trying to indicate that my phone might have a hardware issue?
Solved
Guys hang on looks like a found a solution to this crap.
I carefully observed what happened when my wifi turned off automatically. My phone flashed a message "Get IP address fail, please check wifi password or wifi app status"..
I thought of making my wifi setting from dynamic to static. I used "ipconfig/all" in my cmd to get the details for setting up static ip. i rebooted both my phone and router. And bang!!! It has not been showing the problem now.! I've been using it for 10 minutes now at a stretch ( for the first time).. Am happy and hope that it doesnt recur. Will let u guys know , if the prob comes back!
Hello guys
bballer_sid said:
Guys hang on looks like a found a solution to this crap.
I carefully observed what happened when my wifi turned off automatically. My phone flashed a message "Get IP address fail, please check wifi password or wifi app status"..
I thought of making my wifi setting from dynamic to static. I used "ipconfig/all" in my cmd to get the details for setting up static ip. i rebooted both my phone and router. And bang!!! It has not been showing the problem now.! I've been using it for 10 minutes now at a stretch ( for the first time).. Am happy and hope that it doesnt recur. Will let u guys know , if the prob comes back!
Click to expand...
Click to collapse
Hello guys i have a problem it is simmilar to your's. Im a noob maybe but the problem is that i connect to my internet in PC and phone to phone works good atleast till i go to google play or some internet apk then it starts the tragedy connect dissconnect connect dissconnect connect dissconnect connect dissconnect connect dissconnect all this for a 3 seccond window !!! please help me this is very stupid i cant use nothing i go to my browser and same connect dissconnect connect dissconnect connect dissconnect connect dissconnect Please find something i just dont know what to do and its making me mad/Crazy
check my fix
http://forum.xda-developers.com/and...gn-to-wifi-t2862509/post55137095#post55137095
I'm so pissed now
bballer_sid said:
Someone please help me out of this ! Have been trying to correct it for a while! Nothing seems to work out for me. Thought of posting it on XDA. I hope u guys help me asap... \\\\first time on XDA/////
So the problem is: I have an android phone MOTOROLA FIRE XT530. I have got wifi , belkin router in my home , which i use to connect my laptop and cell phone to browse on internet! There is no problem in browsing from laptop indicating there is no problem with my wifi settings or anythng related to wifi!
BUT, on my phone, when i turn wifi 'ON' , the wifi works for 2-3 minutes then it automatically disconnects and then instantly reconnects itself! I dont really have problem with this thng but the other day i was upgrading my swype to swype beta and had to download this application but the app is too large sized that in the middle of the downloading my wifi went off thereby stopping the download(n sadly its non resumable). I am a huge fan of swype and have been using it for quite a while now. I want it upgraded at any cost!
I know this wifi turn on/off problem is faced by many but this is quite a headache nw! I have come to know about 'POWER SAVING MODE' n stuff, but sadly i can't even get to that menu coz i dont know how to!
Someone plz plz plz , help me as i am stuck with it from a long tym nw! anticipating early n useful replys :fingers-crossed:
-Sid:good:
Click to expand...
Click to collapse
I have a weird problem. I own a Sony Xperia M and a Toshiba Satellite Laptop. Whenever I turn on the wifi of my phone, the laptop's wifi no longer works. Not only on my home's wifi but this condition applies on each and every wifi I've ever tried connecting. Can anyone help me, please?
Ip conflict?. Set a static ip.
Sent from my GT-I9300
im having some dropout issue
while wifi on and turned screen off the wifi stop working
Blue icon but no up down arrow , more awhile turn grey and needed to reopen wifi only can use...
Any help??
zjlow1314 said:
im having some dropout issue
while wifi on and turned screen off the wifi stop working
Blue icon but no up down arrow , more awhile turn grey and needed to reopen wifi only can use...
Any help??
Click to expand...
Click to collapse
If you are talking about the CM10.1 that just had the wifi fixed then this issue needs to be reported to the developer. The developer needs to fix this issue.
rqmok said:
If you are talking about the CM10.1 that just had the wifi fixed then this issue needs to be reported to the developer. The developer needs to fix this issue.
Click to expand...
Click to collapse
but how to report? I can't able to post any comment on Android development
I just read your first post more carefully.
The wifi was fixed by dzo. He fixed the wifi the same way he fixed wifi in Aurora ICS. Your wifi problem is also in Aurora.
The best you can do is to flash the ROM (v5 with wifi) again (do a clean install). If it still doesn't fix that problem, then tell me and I will report the problem to developer.
Thanks.
rqmok said:
I just read your first post more carefully.
The wifi was fixed by dzo. He fixed the wifi the same way he fixed wifi in Aurora ICS. Your wifi problem is also in Aurora.
The best you can do is to flash the ROM (v5 with wifi) again (do a clean install). If it still doesn't fix that problem, then tell me and I will report the problem to developer.
Thanks.
Click to expand...
Click to collapse
Okay, I went back to Aurora V5U21 and flashed http://forum.xda-developers.com/showpost.php?p=24412002&postcount=3379
the patched WLAN configuration. Everything seems work great except I set the WiFi always on but when screen off still WiFi will off, but everytime it off it will autoconnect itself without reopen the WiFi.
And also I installed a clean CM10.1 V5, and used like 1 or 2hour then the WiFi icon remain blue but without updown arrow then awhile become grey and won't auto reconnect anymore, just stay grey there until I reopen WiFi. Is not a big problem but sometimes I open WiFi wait for Whatsapp or other social apps. I don't know when it disconnect.
zjlow1314 said:
Okay, I went back to Aurora V5U21 and flashed http://forum.xda-developers.com/showpost.php?p=24412002&postcount=3379
the patched WLAN configuration. Everything seems work great except I set the WiFi always on but when screen off still WiFi will off, but everytime it off it will autoconnect itself without reopen the WiFi.
And also I installed a clean CM10.1 V5, and used like 1 or 2hour then the WiFi icon remain blue but without updown arrow then awhile become grey and won't auto reconnect anymore, just stay grey there until I reopen WiFi. Is not a big problem but sometimes I open WiFi wait for Whatsapp or other social apps. I don't know when it disconnect.
Click to expand...
Click to collapse
OK, I will report that for you to the developer.
Same here
I too experience wifi not comnnecting after sleep mode... and When connected to USB mode.. the transfer rate is around 170 kbps... Anyone hav this problem??
I have sent a message to the developer. Now, I am not sure if he will fix this problem or not. I think he will fix it because a lot of people on the development thread are talking about this issue as well.
Since we are talking about CM10.1 wifi issues, I'll state mine too.
I installed CM10.1 v7 on my U8800, everything looked ok, apart from the wifi. I could see all networks around me but the phone couldn't connect to anyone.
The same issue was present in aurora 5v20 but flashing the alt wpa supplicant fixes the problem.
I tried using the same file in CM10.1, the wifi connected but only my home's router was visible ( I should be able to see at least 5 more routers) I could not see nor connect to any other network.
Anyone know why does this happen?
angmarGR said:
Since we are talking about CM10.1 wifi issues, I'll state mine too.
I installed CM10.1 v7 on my U8800, everything looked ok, apart from the wifi. I could see all networks around me but the phone couldn't connect to anyone.
The same issue was present in aurora 5v20 but flashing the alt wpa supplicant fixes the problem.
I tried using the same file in CM10.1, the wifi connected but only my home's router was visible ( I should be able to see at least 5 more routers) I could not see nor connect to any other network.
Anyone know why does this happen?
Click to expand...
Click to collapse
I switched back to Aurora v5u21, waiting CM10.1 V9 release only try.
zjlow1314 said:
I switched back to Aurora v5u21, waiting CM10.1 V9 release only try.
Click to expand...
Click to collapse
I am currently on CM10.1 v9 and found out that if I enable wifi modes b + g on my router the phone connects. With g mode only no luck. I don't know if that helps you, but it is something.