Defy cm10 wifi trouble - Defy Q&A, Help & Troubleshooting

Has anoyone else trouble with wifi and cm10? I can't download more than a few mb. then the connection stalls, and I have to manually disconnect and reconnect to get it working again. I'm using a m252 with green lense as phone and a fritzbox 7390 as wifi router.

I forgot: Wifi in CM9 worked without problems...

desperadoduck said:
I forgot: Wifi in CM9 worked without problems...
Click to expand...
Click to collapse
I have the same problem, but also on stock defy, CM7 but under CM10 it occures more often. (Defy green lens)

I had trouble with a virgin media hub, but a sky one works fine. If the hub has a connect button try connecting that way instead of via entering key and it might work, did for me
Sent from the real world by hacking into the matrix

hey,
yeah I had exactly the same problem as the OP described. Initially I couldn't get the wifi to connect at all, got stuck on 'obtaining IP address'. I had to cancel my wifi wpa2 security and put it back on later to resolve that issue.
(If it helps anyone - I tried out cm10 for a few days, but ran into wifi problems, rockplayer didn't work (that is supposed to be resolved by now), and couldn't get the samba share to work. So I'm switching back to cm7.2 for a little longer. cm10 looks great and it never crashed on me so I'm very impressed, and actually donated AGAIN to the developers

Just for the record, here are the results of some experiments I did:
* full wipe: didn't help
* connect via wps: didn't help
* disabled wp on routers: didn't help
* switched from wpa2 to wpa: didn't help
* disabled disconnect on bad connection: didn't help
* switched back to cm9: everything works fine
so I guess I'm stuck for now... :-/

desperadoduck said:
Just for the record, here are the results of some experiments I did:
* full wipe: didn't help
* connect via wps: didn't help
* disabled wp on routers: didn't help
* switched from wpa2 to wpa: didn't help
* disabled disconnect on bad connection: didn't help
* switched back to cm9: everything works fine
so I guess I'm stuck for now... :-/
Click to expand...
Click to collapse
08/08 quarx build everything seems fine, could try it

@non4 said:
08/08 quarx build everything seems fine, could try it
Click to expand...
Click to collapse
I get the message 'Authentication problem' on my Defy running 08/08 quarx installed this morning.
I've tried restarting the Thomson router but nothing changes. Wifi worked fine on C7.1 but I must admit I didn't check it on the C10 04/08 build.
My 3G connection is pretty good so I have no plans to uninstall and will double check at the weekend, where I can get access to a BT Homehub.

brunc said:
I get the message 'Authentication problem' on my Defy running 08/08 quarx installed this morning.
I've tried restarting the Thomson router but nothing changes. Wifi worked fine on C7.1 but I must admit I didn't check it on the C10 04/08 build.
My 3G connection is pretty good so I have no plans to uninstall and will double check at the weekend, where I can get access to a BT Homehub.
Click to expand...
Click to collapse
Never even heard of a Thompson one. All I've tried (and all working) are BT, Sky and Virgin.

@non4 said:
08/08 quarx build everything seems fine, could try it
Click to expand...
Click to collapse
I'm using it ( CM10 08/08 quarx) too, but I have the same wifi problems (shows the phone connected to the wifi but the internet is stopped).
As far as I can see, they (stock, CM, MIUI, WIUI) work differently on each phone.
Regards,

wurealm said:
I'm using it ( CM10 08/08 quarx) too, but I have the same wifi problems (shows the phone connected to the wifi but the internet is stopped).
As far as I can see, they (stock, CM, MIUI, WIUI) work differently on each phone.
Regards,
Click to expand...
Click to collapse
Interesting.
For the record my router is the Thomson TG585 v8 - it gets pretty mixed reviews and can clearly be bettered so perhaps I should upgrade it. I'll report on Saturday how I get on with the BT Homehub.
Also for the record the 08/08 build runs more smoothly than the 04/08 build - very nice!

I encountered some problems (disconnecting from time to time while device is not moved) but the scan connect speed increased compared to CM9. Also switching WiFi on/off is much more faster now. Very convinient when choosing between different WLANs.

me too...
This is so troubble

RPHJR said:
This is so troubble
Click to expand...
Click to collapse
I see the 08/08 build has been replaced entirely by 10/08... let's see what that brings!

Wifi using BT homehub seemed to work OK - installed 10/08 and is fine too... good upgrade!
Sent from my MB525 using xda app-developers app

wifi resolved
I was same problem with wifi data connectivity. After some MB dropped the the connection. (tplink wifi router). Switched the wifi speed from 300 mbps to 54 mbps. After this the wifi worked normaly, no dropped data connection, and download speed is over 10 mbps, and the upload speed is over too 10 mbps.
Defy MB525 red lens GB kernel 12.08-nightly
Sorry my bad english

Same problem here on CM10-20120812-NIGHTLY-mb525.zip with MB525 green lense. After a while wifi has no more internet connection, but device connection is shown properly on phone and AP. Switching wifi OFF/ON on phone helps.

Temporary fix, I have trouble with virgin media routers. Connect via wps button on the hub, it works, takes a while to connect but at least it works, I get authentication error when using password

macrobbi said:
Same problem here on CM10-20120812-NIGHTLY-mb525.zip with MB525 green lense. After a while wifi has no more internet connection, but device connection is shown properly on phone and AP. Switching wifi OFF/ON on phone helps.
Click to expand...
Click to collapse
The Wi-Fi ON/OFF switching helps too and is easier/quicker than the phone switching

wurealm said:
The Wi-Fi ON/OFF switching helps too and is easier/quicker than the phone switching
Click to expand...
Click to collapse
Temporary solution
Before connecting to wifi try disable mobile connections, then turn it on after

Related

[Q] How to allow incoming TCP connections (WebDroid, SSHDroid, etc.)?

Hi all,
Wondering if anyone knows how to make Android open the ports necessary for incoming connections for server apps to work without having to ping the client first under su?
Or failing that, is there a way to run a script that will ping the client IP instead of having to run the command by hand in terminal?
Thanks!
New, clearer, catchier title
This is the dev section not Q&A.
TheATHEiST said:
This is the dev section not Q&A.
Click to expand...
Click to collapse
Sorry, my bad. Mods, could someone please move my question to the appropriate venue?
LOVE your nick and avatar, dude!
Greetings from a fellow damned heathen!
i would really love to see a solution there too!
RemoteSMS over wlan would be awesome
Yom said:
Sorry, my bad. Mods, could someone please move my question to the appropriate venue?
LOVE your nick and avatar, dude!
Greetings from a fellow damned heathen!
Click to expand...
Click to collapse
.............
Any takers?
Posted from My Hacked HD2
Second that! Something's off in 99/100 ROMS, TCP doesn't seem to do anything. Only one Sense ROM by cotulla seems to work.
I disabled the adblocking hosts file to test if it had anything to do with it (e.g. SSHDroid doesn't work with it) but that didn't help anything either
Agreed, does not seem to work on any rom I've tried, only Cotulla's 'Stock Desire' Sense build seems to work (this one: http://forum.xda-developers.com/showthread.php?t=893620).
Too bad Sense's so completely dire, otherwise I'd use that. I want CyanogenMOD.
Having the same question. I am sure here must be someone who knows how to enable inbound connections....
Little update:
I noticed it is possible for me to ping and use all services when using the gateway to access everything, in my case the access point/wifi router.
So it looks like this is some kind of routing/firewall issue but I can't find anything about default blocking or firewalling on android...
Good news. I found out what is causing this on almost every build.
It has something to do with the stock wifi tethering. If you try and enable it in almost every rom it will fail, but now turn on your wifi again and everything works as it would normally do!
The build it does work on also has working stock wifi tethering, so that explains that...
For now it's good to have this workaround and I hop to have a proper fix in the future
im using RAFDROID 3.0 and i dont think i have this problem at all. I tried SwiFTP and it connected without any issues.
Try to update the busybox version mine is 1.15.2
SantanaNL said:
Good news. I found out what is causing this on almost every build.
It has something to do with the stock wifi tethering. If you try and enable it in almost every rom it will fail, but now turn on your wifi again and everything works as it would normally do!
The build it does work on also has working stock wifi tethering, so that explains that...
For now it's good to have this workaround and I hop to have a proper fix in the future
Click to expand...
Click to collapse
I tried this on Frankinstine's awesome ROM, but no cigar. There has to be a firewall rule or setting we can tweak to allow this kind of traffic...
Yom said:
I tried this on Frankinstine's awesome ROM, but no cigar. There has to be a firewall rule or setting we can tweak to allow this kind of traffic...
Click to expand...
Click to collapse
It works for me, but it's not 100% foolproof. It seems to work for a while, but not permanently. However, it's still better than the ping method. The ping method would never work for me, since I use Wifi at least 4 different places a week. Even when done automatically, how would I know what to ping on what Wifi network?! Random DHCP on workstations notwithstanding...
This does it for me:
turn on normal Wifi
wait around 10 seconds (for Wifi to 'start')
turn on Wifi hotspot (normal wifi should turn it self off automatically)
wait around 20 seconds (the hotspot takes a while to 'start', it actually fails (error) for me, but still does the trick)
turn normal Wifi on again
At that point it "works" for me, at least for a while.
At the very least this seems to indicate that the broken Wifi hotspot and this problem are related -- on Cotulla's build (where stock Wifi hotspot WORKS), this problem is non-existent.
Unfortunatly your steps do not work for me :-(
strikernl said:
It works for me, but it's not 100% foolproof. It seems to work for a while, but not permanently. However, it's still better than the ping method. The ping method would never work for me, since I use Wifi at least 4 different places a week. Even when done automatically, how would I know what to ping on what Wifi network?! Random DHCP on workstations notwithstanding...
This does it for me:
turn on normal Wifi
wait around 10 seconds (for Wifi to 'start')
turn on Wifi hotspot (normal wifi should turn it self off automatically)
wait around 20 seconds (the hotspot takes a while to 'start', it actually fails (error) for me, but still does the trick)
turn normal Wifi on again
At that point it "works" for me, at least for a while.
At the very least this seems to indicate that the broken Wifi hotspot and this problem are related -- on Cotulla's build (where stock Wifi hotspot WORKS), this problem is non-existent.
Click to expand...
Click to collapse
engst03 said:
Unfortunatly your steps do not work for me :-(
Click to expand...
Click to collapse
That's unlucky. Those steps seem to "work" for me on CleanDroid 1.30. Maybe we can just hope it works again when the stock wifi hotspot is fixed.
Alternate "solution":
Get Cotulla's "Stock Desire" ROM: http://forum.xda-developers.com/showthread.php?t=893620
It definitely works on that. Too bad sense is dog****, and your battery will last for a day max.
strikernl said:
This does it for me:
turn on normal Wifi
wait around 10 seconds (for Wifi to 'start')
turn on Wifi hotspot (normal wifi should turn it self off automatically)
wait around 20 seconds (the hotspot takes a while to 'start', it actually fails (error) for me, but still does the trick)
turn normal Wifi on again
Click to expand...
Click to collapse
Just tried this and it worked. As soon as I started the wifi the second time my computer started pinging HD2.
My usual procedure for fixing this was to start wifi, see assigned IP address and then ping my computer from 'Net Ping' app. This can be faster sometimes.
Is there a way to port hotspot from Cotulla's build to a nonSense build? No way for me to come back to sense again
clyder said:
Just tried this and it worked. As soon as I started the wifi the second time my computer started pinging HD2.
My usual procedure for fixing this was to start wifi, see assigned IP address and then ping my computer from 'Net Ping' app. This can be faster sometimes.
Is there a way to port hotspot from Cotulla's build to a nonSense build? No way for me to come back to sense again
Click to expand...
Click to collapse
Don't know, it's probably in the kernel, so shouldn't be too difficult, but then again, I haven't really got a clue about building ROMs.
agarp said:
im using RAFDROID 3.0 and i dont think i have this problem at all. I tried SwiFTP and it connected without any issues.
Try to update the busybox version mine is 1.15.2
Click to expand...
Click to collapse
RAFDROID is also a sense build, we want it to work on all builds, stock and CM

[HELP] Cm7.0.2 don´t see wifi network

I have have updated cm7 to 7.0.2 and my gps is now working well... but now i´m facing a new issue.
I use a coffe shop wireless connection to do many things to the phone. but now it cant find the signal from that connection.
Before the update, and in cm6.1 i could connect to the wireless, now it dont show up on the wireless connections screen.
can anyone help me in here?
ICavalera said:
I have have updated cm7 to 7.0.2 and my gps is now working well... but now i´m facing a new issue.
I use a coffe shop wireless connection to do many things to the phone. but now it cant find the signal from that connection.
Before the update, and in cm6.1 i could connect to the wireless, now it dont show up on the wireless connections screen.
can anyone help me in here?
Click to expand...
Click to collapse
I had the same problem. I think it's being caused by the wifi trying to autoconnect to a remembered AP in range. I just had my phone "Forget" the network I knew it was trying to connect to (my home network) and it worked.
santisolinho said:
I had the same problem. I think it's being caused by the wifi trying to autoconnect to a remembered AP in range. I just had my phone "Forget" the network I knew it was trying to connect to (my home network) and it worked.
Click to expand...
Click to collapse
but every one sees the wifi network and i dont see...
really i am almost to downgrade to cm6.1 were there i have no trouble to wif and gps.
Today i saw the network and try to connect and fail... and then i connect and in the middle of using ebuddy disappear. then could not connect anymore.
Hi,
Cm7 is quiet weak with wifi. Meaning the signal strentgh in cm7 is less like e.g. on b 0.8.4 maybe flashing another radio helps.
Sent from my Legend using XDA App
I flash another radio and didn't work. Clear data, cache and dalvik. Nothing. Só i give a trie on nightly #58. Did a clean install and it worked. Went to the coffee shop and detect the wifi and could connect with a good signal. Tomorrow i'm going to my brother's house where i had the same problem. Then i will report if it's ok or not.
Thanks.
Sent from my Legend using XDA App
I went to the coffee shop and again... i dont see the wifi. Yesterday worked... today cant find again. I love cm7, but like this is not very good. Well, im going to downgrade. I cant find any real solution.
Sent from my Legend using XDA App
have you tried changing channels on wifi settings-->advanced-->regulatory domain? just a shot though. it worked for me on the nightlies. on latest cm7 stable though, i haven't need to change it...
did you use any other wifi tool than the cm7 internal one? Wifi analyser or similar apps may watch out for more ssid than CM7 itself
maybe the wifi channel is out of range, meaning cannel 11 or higher. Then change the channel settings in android settings
alexkno said:
did you use any other wifi tool than the cm7 internal one? Wifi analyser or similar apps may watch out for more ssid than CM7 itself
maybe the wifi channel is out of range, meaning cannel 11 or higher. Then change the channel settings in android settings
Click to expand...
Click to collapse
thanks... im trying!

[Port][HOW TO] Solve WIFI and GPS problem

Thanks to the FAQ by antony.ps
antony.ps said:
8) Can't connect to my wireless network.
- Tap and hold the SSID of the network and select Forget
13) How can I make GPS work better (be more fast and precise)?
- Make a backup of your /etc/gps.conf (use a file manager to rename or copy to another place)
- Visit this thread
- Click in the link "XDA Members Click Here" at the final of the post, and search for the correct .zip for your country
- Copy the .zip to your SD Card and reboot in Bootmenu, then flash the zip via Custom Recovery
Click to expand...
Click to collapse
For me, Wifi and GPS don't seem to be giving problems. But again, thanks for bringing in the useful information.
not working in Brazil with Cm7 rom ported from defy
On my UK 2.2.2 android there is no /system/etc/gps.conf file. Maybe this GPS fix is only for HTC phones.
In MIUI, I have the file in
/system/etc/gps.conf
and
/etc/gps.conf
sahilarora911 said:
In MIUI, I have the file in
/system/etc/gps.conf
and
/etc/gps.conf
Click to expand...
Click to collapse
/etc is a symlink to /system/etc the files are the same.
Sent from my Milestone 2 XDA App
dangpzanco said:
/etc is a symlink to /system/etc the files are the same.
Sent from my Milestone 2 XDA App
Click to expand...
Click to collapse
I don't know much about unix based systems, so pardon my ignorance
But it's nice to learn..
sahilarora911 said:
I don't know much about unix based systems, so pardon my ignorance
But it's nice to learn..
Click to expand...
Click to collapse
=D Don't worry.
This port not working on my MS2...
I have an issue whit my wifi:
it stopped receiveing wifi signal, then I flashed the last version but it still not receiving any wifi signal.
I tried to delete my saved wifi and it doesn't work
a data wipe can help?
any suggestion?
I use cyanogenmod 7 rom
skaburn said:
I have an issue whit my wifi:
it stopped receiveing wifi signal, then I flashed the last version but it still not receiving any wifi signal.
I tried to delete my saved wifi and it doesn't work
a data wipe can help?
any suggestion?
I use cyanogenmod 7 rom
Click to expand...
Click to collapse
Are you using the latest version of the Rom?
Did you flash a Froyo and/or a GB SBF?
Sent from my Milestone 2 XDA App
Wifi problems with 802.11 N + PEAP Authentication
Hi folks!
Here in my university we have a Network called Eduroam (www.eduroam.org , probably you've already heard about it).
The Hotspots are N capable, so my phone, if connected, shows a speed of 65 Mbps. For the authentication, we use MSCHAP v2. So far, so good...
Now to the things I experienced: @ home, where I use a 802.11g network, everything seems to be ok.
Here in the university it's not. Sometimes it needs a really long time to connect to the network, and sometimes it drops the connection just shortly after. Switching off and on again speeds up the process a lot.
But now to the worst part: Often, the connection is shown as established ('Connected'), but in reality there is no connection: No mail connection, no HTTP connection, ping doesn't go through... nothing. Even it shows it is still connected.
Now I am not sure if this issue is caused by the autentication or the N Network , but I can say two things for sure:
1. My laptop, when connected to the same network with the same parameters works fine.
2. It has been working fine up to the transition from Android 2.3.5 to 2.3.7.
I'm running cm7-20111021-NIGHTLY-Milestone2-ICS-pre_stable-v1.5 on a A953, but was also experiencing those issues on builds before that one.
I'd have loved to post this into the developement thread, because I have already seen someone describing a simmilar issue (less detailed unfortunately), but I can't due to the 10 posts minimum rule.
Best regards and thanks for that great port, Endless !
jsschmid said:
Hi folks!
Here in my university we have a Network called Eduroam (www.eduroam.org , probably you've already heard about it).
The Hotspots are N capable, so my phone, if connected, shows a speed of 65 Mbps. For the authentication, we use MSCHAP v2. So far, so good...
Now to the things I experienced: @ home, where I use a 802.11g network, everything seems to be ok.
Here in the university it's not. Sometimes it needs a really long time to connect to the network, and sometimes it drops the connection just shortly after. Switching off and on again speeds up the process a lot.
But now to the worst part: Often, the connection is shown as established ('Connected'), but in reality there is no connection: No mail connection, no HTTP connection, ping doesn't go through... nothing. Even it shows it is still connected.
Now I am not sure if this issue is caused by the autentication or the N Network , but I can say two things for sure:
1. My laptop, when connected to the same network with the same parameters works fine.
2. It has been working fine up to the transition from Android 2.3.5 to 2.3.7.
I'm running cm7-20111021-NIGHTLY-Milestone2-ICS-pre_stable-v1.5 on a A953, but was also experiencing those issues on builds before that one.
I'd have loved to post this into the developement thread, because I have already seen someone describing a simmilar issue (less detailed unfortunately), but I can't due to the 10 posts minimum rule.
Best regards and thanks for that great port, Endless !
Click to expand...
Click to collapse
Probably you can try switching off the N network from your phone. Force it to connect through G.
This post might help you.
http://forum.xda-developers.com/showpost.php?p=9467118&postcount=4
It basically disables n network from Milestone 2
You can give it a shot.
I delete all my wifi connections, reboot the cell and work all good..
Enviado desde mi MotoA953 usando Tapatalk
Good for me
Neuralsystem said:
not working in Brazil with Cm7 rom ported from defy
Click to expand...
Click to collapse
Seemed to work for me. Im with CM7 too.
Download and installed South America.zip
Thanks a lot for the post
Hi everyone,
yesterday I was it my friend and tried to connect to his access point. He has b/g AP with WPA2 password protection & DHCP enabled. But when I tried to connect it kicked me off in authetication state and tried to connect again - but without success. I tried to disable and enable wifi, deleting saved connection, but nothing of this helped me.
I'm using CM7 - does anyone have similiar or same problem - connecting to WPA2-PSK wifi? I'm using WPA at home and it works ok - I just want know if it is global problem with CM7 on Milestone 2 or just me (or just this AP) and what solutions can i try.
Thanks for suggestions.
I know it is not here but my phone is locked in airplane mode!
Anonymous_ said:
Hi everyone,
yesterday I was it my friend and tried to connect to his access point. He has b/g AP with WPA2 password protection & DHCP enabled. But when I tried to connect it kicked me off in authetication state and tried to connect again - but without success. I tried to disable and enable wifi, deleting saved connection, but nothing of this helped me.
I'm using CM7 - does anyone have similiar or same problem - connecting to WPA2-PSK wifi? I'm using WPA at home and it works ok - I just want know if it is global problem with CM7 on Milestone 2 or just me (or just this AP) and what solutions can i try.
Thanks for suggestions.
Click to expand...
Click to collapse
It always happens to me on my uncle's house. His wifi is WPA2 and has such a BIG password, but when I try to connect the phone acts as if nothing happened...
I think it's a global problem with Milestone 2, because it didn't work in any Rom, Froyo/CM7/GB/MIUI.
Sent from my Milestone 2 XDA App
MasterTB said:
I know it is not here but my phone is locked in airplane mode!
Click to expand...
Click to collapse
Reboot, disable airplane mode, than reboot again.
Sent from my Milestone 2 XDA App
in my MS2, wifi will connect and disconnect again and again, even if forgeting my wireless node

[Q] Wifi stalls [Solved]

Pardon me if this is a repeat, but I've searched and found nothing.
I'm on Moto Defy/MB525, rooted, overclocked, CM7.
My issue is this....Wifi on my home network connects just fine, surfs just fine, until I connect andFtp to my Mac. Initially, everything is good...connects fine, ls- fine, allows selection of file on host and destination on client. The problem comes in between 2% & 5% transfer; wifi stalls, socket disconnects(Server kick out?), wifi becomes inactive for anything/everything. I can cycle the wifi and it 's functionality returns. Then I'm back at the start. Thought it was andFtp, but it works fine with my website, as does my Mac.
So I guess my question is....why would/should/could FTP cause the wifi to fail?
Thanks in advance
supernugget said:
Pardon me if this is a repeat, but I've searched and found nothing.
I'm on Moto Defy/MB525, rooted, overclocked, CM7.
My issue is this....Wifi on my home network connects just fine, surfs just fine, until I connect andFtp to my Mac. Initially, everything is good...connects fine, ls- fine, allows selection of file on host and destination on client. The problem comes in between 2% & 5% transfer; wifi stalls, socket disconnects(Server kick out?), wifi becomes inactive for anything/everything. I can cycle the wifi and it 's functionality returns. Then I'm back at the start. Thought it was andFtp, but it works fine with my website, as does my Mac.
So I guess my question is....why would/should/could FTP cause the wifi to fail?
Thanks in advance
Click to expand...
Click to collapse
Not exactly the same as your issue but I see you use CM7 and thats the one ROM that I have had wifi issues with, do the problems occur when the screen goes to sleep ?The issue I have is that regardless of wifi sleep policy when the screen goes to sleep,although I am "connected" streaming radio starts to stutter,or transfer rates will crash,I know its not the same issue as the one you have but here is a link to bug report for CM 7
http://code.google.com/p/cyanogenmod/issues/detail?id=4232
The motorola milestone was/is plagued by similar issues when using WPA2 with certain access points. I think it was related to buggy TI wifi drivers.
For milestone, this was recently fixed in kabaldans CM7 port.
Maybe the defy is using the same buggy drivers?
Sent from my Milestone using XDA App
Thank you both for the answers.
Bombardier, sleep seems irrelevant, it does stutter and I am on wpa2, figure I'll try something different now, eh?
Nanzy, ill try the other rom you mentioned.
Thanks again.
Sent from my MB525 using XDA App
This turns out to be the solution. Switching to WPA solved the entire issue. Thanks again for the insight.

[Q] u8800 cm10.1 wifi issue

im having some dropout issue
while wifi on and turned screen off the wifi stop working
Blue icon but no up down arrow , more awhile turn grey and needed to reopen wifi only can use...
Any help??
zjlow1314 said:
im having some dropout issue
while wifi on and turned screen off the wifi stop working
Blue icon but no up down arrow , more awhile turn grey and needed to reopen wifi only can use...
Any help??
Click to expand...
Click to collapse
If you are talking about the CM10.1 that just had the wifi fixed then this issue needs to be reported to the developer. The developer needs to fix this issue.
rqmok said:
If you are talking about the CM10.1 that just had the wifi fixed then this issue needs to be reported to the developer. The developer needs to fix this issue.
Click to expand...
Click to collapse
but how to report? I can't able to post any comment on Android development
I just read your first post more carefully.
The wifi was fixed by dzo. He fixed the wifi the same way he fixed wifi in Aurora ICS. Your wifi problem is also in Aurora.
The best you can do is to flash the ROM (v5 with wifi) again (do a clean install). If it still doesn't fix that problem, then tell me and I will report the problem to developer.
Thanks.
rqmok said:
I just read your first post more carefully.
The wifi was fixed by dzo. He fixed the wifi the same way he fixed wifi in Aurora ICS. Your wifi problem is also in Aurora.
The best you can do is to flash the ROM (v5 with wifi) again (do a clean install). If it still doesn't fix that problem, then tell me and I will report the problem to developer.
Thanks.
Click to expand...
Click to collapse
Okay, I went back to Aurora V5U21 and flashed http://forum.xda-developers.com/showpost.php?p=24412002&postcount=3379
the patched WLAN configuration. Everything seems work great except I set the WiFi always on but when screen off still WiFi will off, but everytime it off it will autoconnect itself without reopen the WiFi.
And also I installed a clean CM10.1 V5, and used like 1 or 2hour then the WiFi icon remain blue but without updown arrow then awhile become grey and won't auto reconnect anymore, just stay grey there until I reopen WiFi. Is not a big problem but sometimes I open WiFi wait for Whatsapp or other social apps. I don't know when it disconnect.
zjlow1314 said:
Okay, I went back to Aurora V5U21 and flashed http://forum.xda-developers.com/showpost.php?p=24412002&postcount=3379
the patched WLAN configuration. Everything seems work great except I set the WiFi always on but when screen off still WiFi will off, but everytime it off it will autoconnect itself without reopen the WiFi.
And also I installed a clean CM10.1 V5, and used like 1 or 2hour then the WiFi icon remain blue but without updown arrow then awhile become grey and won't auto reconnect anymore, just stay grey there until I reopen WiFi. Is not a big problem but sometimes I open WiFi wait for Whatsapp or other social apps. I don't know when it disconnect.
Click to expand...
Click to collapse
OK, I will report that for you to the developer.
Same here
I too experience wifi not comnnecting after sleep mode... and When connected to USB mode.. the transfer rate is around 170 kbps... Anyone hav this problem??
I have sent a message to the developer. Now, I am not sure if he will fix this problem or not. I think he will fix it because a lot of people on the development thread are talking about this issue as well.
Since we are talking about CM10.1 wifi issues, I'll state mine too.
I installed CM10.1 v7 on my U8800, everything looked ok, apart from the wifi. I could see all networks around me but the phone couldn't connect to anyone.
The same issue was present in aurora 5v20 but flashing the alt wpa supplicant fixes the problem.
I tried using the same file in CM10.1, the wifi connected but only my home's router was visible ( I should be able to see at least 5 more routers) I could not see nor connect to any other network.
Anyone know why does this happen?
angmarGR said:
Since we are talking about CM10.1 wifi issues, I'll state mine too.
I installed CM10.1 v7 on my U8800, everything looked ok, apart from the wifi. I could see all networks around me but the phone couldn't connect to anyone.
The same issue was present in aurora 5v20 but flashing the alt wpa supplicant fixes the problem.
I tried using the same file in CM10.1, the wifi connected but only my home's router was visible ( I should be able to see at least 5 more routers) I could not see nor connect to any other network.
Anyone know why does this happen?
Click to expand...
Click to collapse
I switched back to Aurora v5u21, waiting CM10.1 V9 release only try.
zjlow1314 said:
I switched back to Aurora v5u21, waiting CM10.1 V9 release only try.
Click to expand...
Click to collapse
I am currently on CM10.1 v9 and found out that if I enable wifi modes b + g on my router the phone connects. With g mode only no luck. I don't know if that helps you, but it is something.

Categories

Resources