Hello all! Happy New Year!!!
I was hoping someone would be able to help me out with this issue.
I bought a hd2 from a guy who said it wouldnt start-up all the way. Well i got it and it only boots to the stick together screen.
I tried a hard reset but it didnt help.
I downloaded T-Mobile_HD2_MR_Software_3.14.531.1 from tmobiles website and ran the utility but it stops at 8% and gives an error 262. After doing this it wont even go to the stick together screen, just the bootloader screen.
I downloaded a stock rom( //xdafil.es/HD2/TMOUS/RUU_Leo_1....14_2_Ship.zip ). Put it on the SD, booted the phone, started the process and then got this:
00018003
LEOIMG.nbh- FAIL
RADIO_V2- RSA Fail
RCUST-
BOOTLOADER-
SPLAS1-
OS-
CONFIGDATA-
UPDATE TERMINATE
UPDATE FAIL
Am i doing something wrong? Can someone please help me out....
Also it says this on bootloader:
PB81120 HX-B3
SPL-2.10.0000 8G XE
MicroP(led) 0x05
MicroP(touch) 0x50
The radio is stuck. Seems to be the most common brick aside from 51 radio on a tmous.
Never seen it fixed, though goldcard would be the thing to work if anything does.
Aside from that jtag would be the next thing to look at.
I got my new phone but can't seem to properly HSPL2 it installs fine but then restarts on red green blue screen with the standard startup.
PB81100 SS-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
I tried flashing via usb but no love any ideas?
I can hear the napalm getting loaded and burners turning on but I can't find any device and I am flying to Vegas tomorrow so need to get this installed ASAP
Thanks
no need for hspl 1-2 or 3 , just use sspl and flash your rom
Just sits at 0% on the update!
I've gone from the best phone in the world to the worst
Can you boot the phone on into BootLoader mode, then plug it into the computer.
Run HSPL2, select the version of HSPL you want.
Hi guys. Im trying to install android on my HD2 as you may have guessed. First I have tried getting HSPL installed. It is from Virgin Mobile. It is not locked to a network as I run an 02 simcard in it.
To confirm this is already working my bootloader reads:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
It is has tri-colour and a white at bottom which reads "serial" that is then blank.
If this is correct all is good so far.
I then try and install android from my SD card (have tried multiple versions, all resulting in the same issue)
It boots up and starts running. Every version freezes on Loading Kernel.. or it runs and starts to blur out.
What am I missing in this process?
I have given as much information as I can think of. I look forward to your replies. Sadly I cant get online to tomorrow but look forward to a positive response xD
MaxSan said:
Hi guys. Im trying to install android on my HD2 as you may have guessed. First I have tried getting HSPL installed. It is from Virgin Mobile. It is not locked to a network as I run an 02 simcard in it.
To confirm this is already working my bootloader reads:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
It is has tri-colour and a white at bottom which reads "serial" that is then blank.
If this is correct all is good so far.
I then try and install android from my SD card (have tried multiple versions, all resulting in the same issue)
It boots up and starts running. Every version freezes on Loading Kernel.. or it runs and starts to blur out.
What am I missing in this process?
I have given as much information as I can think of. I look forward to your replies. Sadly I cant get online to tomorrow but look forward to a positive response xD
Click to expand...
Click to collapse
Hi,
I think you missed a couple of steps in the process.
please read this thread:
http://forum.xda-developers.com/showthread.php?t=893948
Check also my sig...guide number 2
Ok I think the difficulty may be something entirely different.
Ive tried installing all kinds of bits and pieces inc the new radio and magldr but they all seem to have the same issue.
When installing the phone reboots but once it loads to the bootloader it no longer detects it on the computer i get a three low beeps (like when a cable is unplugged)
Could this be an issue with my laptop specificly?
Fixed one thing.. turns out my laptop was missing the qualcomm drivers and not updating automatically so was just dropping the phone from the computer..
...ive installed magldr and new radios.. trying to boot android of SD card but it seems to be freezing on the black on green HTC logo display... im sure this issue has came up somewhere else so if someone can point me to a fix while i struggle on and see what I can find on my own back
first load should take longer than usual. just give it around 15 minutes.
HI guys
Last week I received one hd2 tmobile-us from my friend. He got stuck when he was trying to install android.
Currently he's stuck at the t-mobile screen, so I tried to do the power+volume down key and here's the result:
Security Unlocked
--------------------------
PB81*** SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x50
MicroP(TOUCH) 0x50
I'm aware that this is the new fone with spl3.03 on it. So here what I tried:
I tried to use hspl4 and install spl2.08 instead of 3.03 on it, and hspl gives me a error (code 0000000D)
I tried to download a old stock rom (LEO_RUU_1_5_TMOUS_2.10.531.0_Radio_2.08.50) and copy to the SD-CARd (8g), but it stuck at the white screen with the "loading...." text
I tried to install the rom by the bootscreen, does not work.
I tried to install MAGLD on spl3.03 anyway, and as expected, it did not work.
I myself do have another hd2 that's running android NAND on it, and I already spent 3 days searching the forum but I can find any answer on my problem. I'm running out of option and dont know what to do next.
Please help
What error does HSPL4 give you exactly?
Help I am stuck in bootloader. i flashed a tmo us rom on my tmobile hd2 and now i am stuck in the bootloader. the spl changed when i flashed and does after i put hardspl again. Can somebody help me and i have triied installing through sd card and usb.
Are you sure your HD2 is a tmous or eu. If it's call and end buttons are red, it's a TMOUS.
How did you flash the rom. By SD card or by PC via RUU?
Yes it is us because I bought it from T-Mobile and I tried flashing both ways
But, you didn't explain how did you get stuck in boot loader. Didn't you pull the battery?
i pulle dthe battery and put it back in and it still boots into boot loader
i got stuck in boot loader by downgrading from android to wm 6.5
You are telling that your device boots into bootloader pressing the power button and does not perform a normal boot. If so, please state the name of the ROM you flashed and the output of the tri-colour screen.
i flashed the 3.14 one from the official too website
i meant tmobile website
What does the tri-colour screen say?
it says
PB81120 SS-b3
SPl-2.08.HSPL 8G XE
0x05
Cotulla HSPL 0x40
Does the blue colured row say "rom update code" failed. The output you wrote and nothing is wrong with the bootloader and it is normal. I just can't find the cause of it.
Do not waste your time searching for a solution
I've been through the same problem since more than a year and lost a lot of time to solve this problem and I did not find a solution through the Internet
Everything seems sound, but you always boot to bootloader.
it asks for qualcom cmda drivers
you should probably do a factory reset on the phone
saniyal said:
it asks for qualcom cmda drivers
Click to expand...
Click to collapse
No more ideas man.
http://forum.xda-developers.com/showthread.php?t=408105
Try to find something in this topic!
Are you still lost OP?
Sent from my LG-P999 using xda premium
i have the same problem. Just bought today a HTC HD 2 here in Portugal, it is factory unlocked, it brought Android ICS in it, i downloaded PTG latest ROM and rename to leoimg.nbh. it stopped updating, and now i can't do HSPL4 'cause i am on SPL 3.03.0000
and it appears the following on tri-color screen:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
please give me a solution for this problem, please
To fix it, search xda for mtty.exe, than perform task 29 and than task 2a and than task 8, than reboot to 3 color screen again and install oficial ruu wince rom