Database Users

How to identify stock rom??

I have purchased HTC HD2 stuck in boot screen. Only white screen with HTC logo (no red letters with spl etc.)
Now i want to try flash it with stock rom from SD card but i do not now what rom to flash.
Is there a way to identify what is stock rom for my device.
I can enter in bootrom.
PB81100 HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Serial on device starts with HT03CNW....
Please help.

well it doesn't really matter what's on there already if its not booting, just flash any stock rom too check it actually works them change if you need to.
if its a tmous then make sure you flash a compatible stock rom.
if its a branded device then you may find some roms wont flash and you ned to "goldcard" it.

Flash OK, HD2 still stuck in boot screen
Hello,
I have flashed HD2 with RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.
After starting flash radio was flashed, then flash restarted hd2 and then started from begining and everithing flashed OK. i restarted hd2 but status remained the same.
It booted in white screen with HTC logo but there were no red leters in lower part of screen.
Also hd2 after HTC logo vibrated six times. I left phone in that state for 20 minutes, but nothing hapened.
What to do??
In bootloader now:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
Any suggestions??

not sure, sorry.
im not that clued up on flashing issues, someone will have an answer for you though...

It sounds as though it may be a operator locked phone and it won't upgrade to a HTC stock ROM.
Where and how did you download the 3.14 ROM?
Any info you can tell us about the phone, ie USA or International, locked to an operator or SIM free?

I downloaded 3.14 from htc.nl site. I wrote serial and it permited me to download fw.
I purchased phone on eBay from guy in Netherlands. He stated that phone is not locked. The rest i do not know.
Yesterday i downgraded spl to 1.42 with sspl and then instaled HSPL 2.
I upgraded to WWE 1.48 but status remain the same.
Also i tryed with mtty and task 28 and task 29 but that also did not change status.
Thanks,
D

[Q] Is there any hope for my HD2

I recently came across a hd2 from some kid on craigslist. He said that the phone was frozen at the "stick together" logo. I have done some reading on here and seen a guy with a similar problem. He says that he downloaded the update from the t-mobile website. I tried that and the phone keep coming up with some error saying the phone was in recovery mode. I noticed that the image version was blank before I tried the update. This is what the phone says in the bootloader color screen-
PB81120 MFG SS-B3
SPL-2.00.1000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Please tell me if there is anything I can do with this phone.

mfg on top line and spl 2.00.1000 say it has a manufacturing spl. as far as i was aware only non tmous pre tmous release test/manufacturing roms shipped with that spl.
you should read through the various "stuck on spl 2.00 threads. but you !!!!!!MUST!!!!!! tread very carefully, because as i said, the early version 2.x roms aren't necessarily compatible with tmous(especially the radios they contain) this is because the first tmous roms were for the regular hd2, so had regular radio's even though the radio version said ..50..
might be worth messaging a user called xmoo, he knows a lot about test roms and such like.
also worth getting a goldcard made, though i know to begin with (pre tmous days) even goldcard wouldn't shift spl 2.00.
lots and lots of research first.

dapudgee1 said:
I recently came across a hd2 from some kid on craigslist. He said that the phone was frozen at the "stick together" logo. I have done some reading on here and seen a guy with a similar problem. He says that he downloaded the update from the t-mobile website. I tried that and the phone keep coming up with some error saying the phone was in recovery mode. I noticed that the image version was blank before I tried the update. This is what the phone says in the bootloader color screen-
PB81120 MFG SS-B3
SPL-2.00.1000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Please tell me if there is anything I can do with this phone.
Click to expand...
Click to collapse
You could try to flash HSPL and then install a custom rom and is this a Tmobile phone? meaning is there Tmobile written near the ear piece?
Also maybe htc could help you under warranty

...bro, you can't HardSPL out of a MFG SPL...

ashasaur said:
...bro, you can't HardSPL out of a MFG SPL...
Click to expand...
Click to collapse
Well if it's the original hd2. Shouldn't it go in hd2? And thanks for the info will keep it in mind

[Q] Install hspl on on spl3.03 problem (pb81***)

HI guys
Last week I received one hd2 tmobile-us from my friend. He got stuck when he was trying to install android.
Currently he's stuck at the t-mobile screen, so I tried to do the power+volume down key and here's the result:
Security Unlocked
--------------------------
PB81*** SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x50
MicroP(TOUCH) 0x50
I'm aware that this is the new fone with spl3.03 on it. So here what I tried:
I tried to use hspl4 and install spl2.08 instead of 3.03 on it, and hspl gives me a error (code 0000000D)
I tried to download a old stock rom (LEO_RUU_1_5_TMOUS_2.10.531.0_Radio_2.08.50) and copy to the SD-CARd (8g), but it stuck at the white screen with the "loading...." text
I tried to install the rom by the bootscreen, does not work.
I tried to install MAGLD on spl3.03 anyway, and as expected, it did not work.
I myself do have another hd2 that's running android NAND on it, and I already spent 3 days searching the forum but I can find any answer on my problem. I'm running out of option and dont know what to do next.
Please help

What error does HSPL4 give you exactly?

Stuck in bootloader

Help I am stuck in bootloader. i flashed a tmo us rom on my tmobile hd2 and now i am stuck in the bootloader. the spl changed when i flashed and does after i put hardspl again. Can somebody help me and i have triied installing through sd card and usb.

Are you sure your HD2 is a tmous or eu. If it's call and end buttons are red, it's a TMOUS.
How did you flash the rom. By SD card or by PC via RUU?

Yes it is us because I bought it from T-Mobile and I tried flashing both ways

But, you didn't explain how did you get stuck in boot loader. Didn't you pull the battery?

i pulle dthe battery and put it back in and it still boots into boot loader

i got stuck in boot loader by downgrading from android to wm 6.5

You are telling that your device boots into bootloader pressing the power button and does not perform a normal boot. If so, please state the name of the ROM you flashed and the output of the tri-colour screen.

i flashed the 3.14 one from the official too website

i meant tmobile website

What does the tri-colour screen say?

it says
PB81120 SS-b3
SPl-2.08.HSPL 8G XE
0x05
Cotulla HSPL 0x40

Does the blue colured row say "rom update code" failed. The output you wrote and nothing is wrong with the bootloader and it is normal. I just can't find the cause of it.

Do not waste your time searching for a solution
I've been through the same problem since more than a year and lost a lot of time to solve this problem and I did not find a solution through the Internet
Everything seems sound, but you always boot to bootloader.

it asks for qualcom cmda drivers

you should probably do a factory reset on the phone

saniyal said:
it asks for qualcom cmda drivers
Click to expand...
Click to collapse
No more ideas man.

http://forum.xda-developers.com/showthread.php?t=408105
Try to find something in this topic!

Are you still lost OP?
Sent from my LG-P999 using xda premium

i have the same problem. Just bought today a HTC HD 2 here in Portugal, it is factory unlocked, it brought Android ICS in it, i downloaded PTG latest ROM and rename to leoimg.nbh. it stopped updating, and now i can't do HSPL4 'cause i am on SPL 3.03.0000
and it appears the following on tri-color screen:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
please give me a solution for this problem, please

To fix it, search xda for mtty.exe, than perform task 29 and than task 2a and than task 8, than reboot to 3 color screen again and install oficial ruu wince rom

[Q] HTC HD2 need help

Hi everyone,
I think I have a major porblem with my HTC HD2. Last week I got a plane white screen all of a sudden. I reinstalled HSPL on the device. It worked again, but after a day it gave me a white screen again. When I tryed to reinstall HSPL again it gave me numeroues of errors. First time error 262, second time error 270. After that I couldnt even conncect anymore and had error 202. I also can't see the device on my laptop running windows xp. The only way I know it's doing soething is that whan i enter bootloader mode (i believe it's called). The thing in whit changes from serial to USB.
In red its says:
PB81100 HX-BC
SPL-2.08. HSPL 8G XE
0x05
0x04
CotullaHSPL
I'm running a miui rom currently.
I've been searching the forums, but couldn't find a solution. As I don't have accas to my phone, als not trough the laptop.
Hope there is anyone who could help me!

Uhm anyone?