[Q] Is there any hope for my HD2 - HD2 General

I recently came across a hd2 from some kid on craigslist. He said that the phone was frozen at the "stick together" logo. I have done some reading on here and seen a guy with a similar problem. He says that he downloaded the update from the t-mobile website. I tried that and the phone keep coming up with some error saying the phone was in recovery mode. I noticed that the image version was blank before I tried the update. This is what the phone says in the bootloader color screen-
PB81120 MFG SS-B3
SPL-2.00.1000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Please tell me if there is anything I can do with this phone.

mfg on top line and spl 2.00.1000 say it has a manufacturing spl. as far as i was aware only non tmous pre tmous release test/manufacturing roms shipped with that spl.
you should read through the various "stuck on spl 2.00 threads. but you !!!!!!MUST!!!!!! tread very carefully, because as i said, the early version 2.x roms aren't necessarily compatible with tmous(especially the radios they contain) this is because the first tmous roms were for the regular hd2, so had regular radio's even though the radio version said ..50..
might be worth messaging a user called xmoo, he knows a lot about test roms and such like.
also worth getting a goldcard made, though i know to begin with (pre tmous days) even goldcard wouldn't shift spl 2.00.
lots and lots of research first.

dapudgee1 said:
I recently came across a hd2 from some kid on craigslist. He said that the phone was frozen at the "stick together" logo. I have done some reading on here and seen a guy with a similar problem. He says that he downloaded the update from the t-mobile website. I tried that and the phone keep coming up with some error saying the phone was in recovery mode. I noticed that the image version was blank before I tried the update. This is what the phone says in the bootloader color screen-
PB81120 MFG SS-B3
SPL-2.00.1000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Please tell me if there is anything I can do with this phone.
Click to expand...
Click to collapse
You could try to flash HSPL and then install a custom rom and is this a Tmobile phone? meaning is there Tmobile written near the ear piece?
Also maybe htc could help you under warranty

...bro, you can't HardSPL out of a MFG SPL...

ashasaur said:
...bro, you can't HardSPL out of a MFG SPL...
Click to expand...
Click to collapse
Well if it's the original hd2. Shouldn't it go in hd2? And thanks for the info will keep it in mind

Related

Bought one in China (help with rom needed)

I bought one of these in China. Not a Chinese one, an actual T-Mobile USA one (much cheaper). The current ROM is in Chinese, and everytime it boots up it has a xda-china logo on the start-up screen, so I'm guessing it's a custom job.
Either way, I want to flash it to an English custom ROM, and I won't have a problem following your excellent tutorials. Except, I worry if it's already been flashed with a custom rom then it wall already have HSPL. Is there a way I can check this, and if not, is anything bad likely to happen by attempting to flash it if it is already on the phone?
Thanks for any help.
Boot into bootloader and check to see what is listed there. To get into bootloader: turn the phone off, then hold volume down+power.
Look forward to your response.
~Jasecloud4
Well well,
PB81*** SS-B3
SPL-2.00HSPL 8G XE
0x05
CotullaHSPL 0x50
I guess that means I'm good to go then?
Thanks very much!
boneycork said:
Well well,
PB81*** SS-B3
SPL-2.00HSPL 8G XE
0x05
CotullaHSPL 0x50
I guess that means I'm good to go then?
Thanks very much!
Click to expand...
Click to collapse
It seems to have HSPl installed already although not the latest one.
You shall start flashing custom ROMs straight away
If possible, update the HSPL to 2.08HSPL.
If that just means following the HSPL tutorial I'll do that now.
Thanks for everything.

HTC HD2 Hung at opening.

My phone is stuck at the opening white screen. HTC writing wont come up and it wont open. i can go into the bootloader. i guess i did something wrong while flashing a rom. can u help me please.
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
this writes in the boot screen.
did you just flash a cooked rom and haven't yet changed the radio?
probably. ive no idea what to do know to be honest ive given it to repair they said the main board needs to be changed but i dont think its a hardware problem. could u tell me what to do. step by step. i flashed a rom thats true but i havent flashed a radio before doing it.
calen8 said:
My phone is stuck at the opening white screen. HTC writing wont come up and it wont open. i can go into the bootloader. i guess i did something wrong while flashing a rom. can u help me please.
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
this writes in the boot screen.
Click to expand...
Click to collapse
I think you forgot to flash Radio ROM - look into thread of the ROM you flashed, there must be info about radios which are "approved"
thing is i dont know which rom is flashed right now and ive no idea about the radio also.
calen8 said:
thing is i dont know which rom is flashed right now and ive no idea about the radio also.
Click to expand...
Click to collapse
First of all - if you want to do something - read first and gather some info, otherwise you'll have problems.
And if the problem really is with radio, then try THIS first, it should help
just flash a high version radio, which should work regardless of what rom is there.
2.12.50.x or 2.10.50, one of them.
I am flashing the radio from sd and it says
00018003
LEOIMG.nhb - FAIL
Radio - Fail
Update Terminate
Update fail
i am no expert but perhaps try following this method picking a rom you like and also an exceptable radio. good luck
http://forum.xda-developers.com/showpost.php?p=6933055&postcount=14111
try flashing a different rom and see what happens
calen8 said:
ive given it to repair they said the main board needs to be changed
Click to expand...
Click to collapse
oh right its been back to service and got refused,
run hspl2,
choose a stock spl (so 1.66.0000 for a normal hd2 or hspl3 and choose 2.08.0000 for a tmous phone,) and send it back again.
hspl wont change the version =(
oh, well all i can suggest then is you try hspl2, ever option, and hspl3, every option, , maybe one of them can trigger the spl to change.
wont work =(

Return HD2 Back to Stock

My touch screen decided to take a crap on me. Tmobile is sending me a replacement in the mail which should be here in about 5-7 days.
I just need some help returning the phone back to stock. I already removed ChunkyRom using Task29. Then booted the phone to the bootloader to flash the updated Tmobile rom. Now when I boot this is what the screen shows.
PB81120 SS-B3
SPL-2.08 HSPL 8g XE
0x05
CotullaHSPL 0x40
My dad has the same phone (completely stock) and this is what his shows:
pb8 ss-b3
spl-2.10.0000 8g xe
microP(LED) 0x05
MicroP(Touch) 0x40
So I am not sure. I just dont want tmobile to charge my account. Thank you for the advice. I tried to follow some of the posts already on this amazing forum but I wasnt having any luck. I promise I tried to search!
Yeh I am having the same exact problem...My screen just stopped working out of no where and now I need to revert back to original rom radio and hspl...anyone got a link or instructions?
kplonsky said:
My touch screen decided to take a crap on me. Tmobile is sending me a replacement in the mail which should be here in about 5-7 days.
I just need some help returning the phone back to stock. I already removed ChunkyRom using Task29. Then booted the phone to the bootloader to flash the updated Tmobile rom. Now when I boot this is what the screen shows.
PB81120 SS-B3
SPL-2.08 HSPL 8g XE
0x05
CotullaHSPL 0x40
My dad has the same phone (completely stock) and this is what his shows:
pb8 ss-b3
spl-2.10.0000 8g xe
microP(LED) 0x05
MicroP(Touch) 0x40
So I am not sure. I just dont want tmobile to charge my account. Thank you for the advice. I tried to follow some of the posts already on this amazing forum but I wasnt having any luck. I promise I tried to search!
Click to expand...
Click to collapse
Pivo99 said:
Yeh I am having the same exact problem...My screen just stopped working out of no where and now I need to revert back to original rom radio and hspl...anyone got a link or instructions?
Click to expand...
Click to collapse
Download your official stock rom. Extract it to get the nbh file. Rename that nbh to LEOIMG.nbh. Copy it to your SDcard, and flash in bootload mode. This should reverse your HSPL back to spl
10507 said:
Rename that nbh to LEOIMG.nbh. Copy it to your SDcard, and flash in bootload mode. This should reverse your HSPL back to spl
Click to expand...
Click to collapse
This is the part where I am confused. I renamed the file to LEOIMG.nbh but I dont have a clue how to flash it when I am in the bootloader mode.
you not seached for the million and 1 posts about how to return to stock???if its copied right, instead of boot loader it will have LEOIMG to install..search to do it right
Well I formatted my SD card to FAT32 and put the LEOIMG.nbn on the sim card. Boot the phone to the bootloader and it doesn't automatically go to the other screen that is needed to flash the phone.
This is all you have to do..
This is all you have to do:
1. Download HSPL3_PKG, don't ask where, google it!
2. Extract and run as if you were going to flash the HSPL, hit next on first screen, now you get a drop down list, select 2.08.0000 not 2.08.HSPL.
3. Run the program and tarraaaaa.
4. NOw just flash your stock rom the normal way and not from sd since it still didn't work for me after removing HSPL.
fmedrano1977 said:
This is all you have to do:
1. Download HSPL3_PKG, don't ask where, google it!
2. Extract and run as if you were going to flash the HSPL, hit next on first screen, now you get a drop down list, select 2.08.0000 not 2.08.HSPL.
3. Run the program and tarraaaaa.
4. NOw just flash your stock rom the normal way and not from sd since it still didn't work for me after removing HSPL.
Click to expand...
Click to collapse
Here is HSPL3_PKG
Is my HD2 back to stock ?
Hi, after reading loads of posts on this forum I think I managed to put my phone back to stock as I need to return it to HTC.
I had HSPL with some custom rom.
Here are the details from my phone after removing HSPL and Cusrom ROM:
With volume down:
PB81100HX-BC
SPL-1.42.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Installed rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
I will appreciate if anyone can tell me if this is a Stock HD2.
Thanks !
mario_250r said:
Hi, after reading loads of posts on this forum I think I managed to put my phone back to stock as I need to return it to HTC.
I had HSPL with some custom rom.
Here are the details from my phone after removing HSPL and Cusrom ROM:
With volume down:
PB81100HX-BC
SPL-1.42.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Installed rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
I will appreciate if anyone can tell me if this is a Stock HD2.
Thanks !
Click to expand...
Click to collapse
Yes you are back to stock
I finally got mine to read :
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED)
MicroP(TOUCH)
Is this stock for a tmobile HD2 bought in north america?
GutterFaceMobile said:
I finally got mine to read :
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED)
MicroP(TOUCH)
Is this stock for a tmobile HD2 bought in north america?
Click to expand...
Click to collapse
If you have the 3.10 stock ROM then yes that is correct, but if you have the 3.14 stock ROM you need SPL 3.03.0000.
I like the pic for your avatar too by the way.
Help restoring htc hd2 to factory condition after mgldr. Android install
HI, Im new here and im really in need of help restoring my htc hd2 tmobile to factory condition so i can return it for warranty replacement because my screen is not responding at all.
Thanks and more power
This is hat mine shows up.
This is what mine shows up
PB81120 HX-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x04
Is this already been restored to stock so i can return it for warranty exchange..I updated the rom from TMobile site 3.14 version..
Thanks so much.
blue_pirate said:
This is what mine shows up
PB81120 HX-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x04
Is this already been restored to stock so i can return it for warranty exchange..I updated the rom from TMobile site 3.14 version..
Thanks so much.
Click to expand...
Click to collapse
Yes. All SPL xx.0000 is a stock SPL
T-Macgnolia said that if you have 3.14 rom you need SPL 3.03.0000 to make it a stock version, but mine is SPL-2.10.000 and 3.14 rom, if i return it for warranty exchange are they gonna find out that i hacked it and restored it back?
Thanks
blue_pirate said:
T-Macgnolia said that if you have 3.14 rom you need SPL 3.03.0000 to make it a stock version, but mine is SPL-2.10.000 and 3.14 rom, if i return it for warranty exchange are they gonna find out that i hacked it and restored it back?
Thanks
Click to expand...
Click to collapse
Yea I've mentioned this several times, that the tmous 3.14 doesn't seem to update the spl. Its not a problem because it will run happily on spl 2, unlike regular hd2 which will not run 3.14 on anything less than spl 3.03.
samsamuel said:
Yea I've mentioned this several times, that the tmous 3.14 doesn't seem to update the spl. Its not a problem because it will run happily on spl 2, unlike regular hd2 which will not run 3.14 on anything less than spl 3.03.
Click to expand...
Click to collapse
Thanks so much for the info, im new to HTC HD2 hacking and i really appreciate all the infos and help..

How to identify stock rom??

I have purchased HTC HD2 stuck in boot screen. Only white screen with HTC logo (no red letters with spl etc.)
Now i want to try flash it with stock rom from SD card but i do not now what rom to flash.
Is there a way to identify what is stock rom for my device.
I can enter in bootrom.
PB81100 HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Serial on device starts with HT03CNW....
Please help.
well it doesn't really matter what's on there already if its not booting, just flash any stock rom too check it actually works them change if you need to.
if its a tmous then make sure you flash a compatible stock rom.
if its a branded device then you may find some roms wont flash and you ned to "goldcard" it.
Flash OK, HD2 still stuck in boot screen
Hello,
I have flashed HD2 with RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.
After starting flash radio was flashed, then flash restarted hd2 and then started from begining and everithing flashed OK. i restarted hd2 but status remained the same.
It booted in white screen with HTC logo but there were no red leters in lower part of screen.
Also hd2 after HTC logo vibrated six times. I left phone in that state for 20 minutes, but nothing hapened.
What to do??
In bootloader now:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
Any suggestions??
not sure, sorry.
im not that clued up on flashing issues, someone will have an answer for you though...
It sounds as though it may be a operator locked phone and it won't upgrade to a HTC stock ROM.
Where and how did you download the 3.14 ROM?
Any info you can tell us about the phone, ie USA or International, locked to an operator or SIM free?
I downloaded 3.14 from htc.nl site. I wrote serial and it permited me to download fw.
I purchased phone on eBay from guy in Netherlands. He stated that phone is not locked. The rest i do not know.
Yesterday i downgraded spl to 1.42 with sspl and then instaled HSPL 2.
I upgraded to WWE 1.48 but status remain the same.
Also i tryed with mtty and task 28 and task 29 but that also did not change status.
Thanks,
D

Stuck in bootloader

Help I am stuck in bootloader. i flashed a tmo us rom on my tmobile hd2 and now i am stuck in the bootloader. the spl changed when i flashed and does after i put hardspl again. Can somebody help me and i have triied installing through sd card and usb.
Are you sure your HD2 is a tmous or eu. If it's call and end buttons are red, it's a TMOUS.
How did you flash the rom. By SD card or by PC via RUU?
Yes it is us because I bought it from T-Mobile and I tried flashing both ways
But, you didn't explain how did you get stuck in boot loader. Didn't you pull the battery?
i pulle dthe battery and put it back in and it still boots into boot loader
i got stuck in boot loader by downgrading from android to wm 6.5
You are telling that your device boots into bootloader pressing the power button and does not perform a normal boot. If so, please state the name of the ROM you flashed and the output of the tri-colour screen.
i flashed the 3.14 one from the official too website
i meant tmobile website
What does the tri-colour screen say?
it says
PB81120 SS-b3
SPl-2.08.HSPL 8G XE
0x05
Cotulla HSPL 0x40
Does the blue colured row say "rom update code" failed. The output you wrote and nothing is wrong with the bootloader and it is normal. I just can't find the cause of it.
Do not waste your time searching for a solution
I've been through the same problem since more than a year and lost a lot of time to solve this problem and I did not find a solution through the Internet
Everything seems sound, but you always boot to bootloader.
it asks for qualcom cmda drivers
you should probably do a factory reset on the phone
saniyal said:
it asks for qualcom cmda drivers
Click to expand...
Click to collapse
No more ideas man.
http://forum.xda-developers.com/showthread.php?t=408105
Try to find something in this topic!
Are you still lost OP?
Sent from my LG-P999 using xda premium
i have the same problem. Just bought today a HTC HD 2 here in Portugal, it is factory unlocked, it brought Android ICS in it, i downloaded PTG latest ROM and rename to leoimg.nbh. it stopped updating, and now i can't do HSPL4 'cause i am on SPL 3.03.0000
and it appears the following on tri-color screen:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
please give me a solution for this problem, please
To fix it, search xda for mtty.exe, than perform task 29 and than task 2a and than task 8, than reboot to 3 color screen again and install oficial ruu wince rom

Categories

Resources