Database Users

Dead wildfire

Hey guys
I am really sad because my wildfire became handicapped today...
I was playing around with it surfing and playing games
Then I put it on the table played abit on the pc but when I picked it up again the screen didn't turn on when I press unlock I felt feedback so it means the phone works the screen isn't tried restart it vibrates but doesn't turn on screen...
What can be the cause?
Is it because I updated nightlys every two or so days?
Thanks

Plug battery out. And plug it. It happen for me a few times in nightly
Sent from my HTC Wildfire using XDA Premium App

tried everything...
battery pull out, charge it, remove sim\sd... anything...
----
oh and forgot to mention
right before the screen died it went white then it never turned on again
is there a way to flash an rom to the wildfire without touching the device? i.e cable?
i currently have no screen but the device is alive...

Is your screen completely dead? Or only after booting? I.e can you see the bootamimation? Try booting into bootloader mode (volume down + power)
If your screen is completely dead it might be a hardware issue.
snakebiteex said:
tried everything...
battery pull out, charge it, remove sim\sd... anything...
----
oh and forgot to mention
right before the screen died it went white then it never turned on again
is there a way to flash an rom to the wildfire without touching the device? i.e cable?
i currently have no screen but the device is alive...
Click to expand...
Click to collapse
Sent from my HTC Wildfire using XDA App

Why is this in the Dev Forum? Please move!

Yes perhaps it is in the wrong section but by posting that your basically spamming up the forum.
Anyway on topic i agree find out if it really is your screen or just a dodgy flash of a rom
Sent from my GT-P1000 using XDA Premium App

sorry didnt know where to post,
and no i dont even see the animation... as i turn it on i only feel vibration for a sec then i can hear it boot.. but still no screen..
oddly it was after flashing a nightly..
and as i asked:
can anyone tell me if theres a way to flash RUU without screen ? i suspect it might be a problem with software..

Hmmmm you could get sdk and get mobile on pc screen.
not too sure but exhaust all avenues. Have you tried soft reset?
Vol down + power + trackball
Sent from my HTC Desire using Tapatalk

hi,
Download the original RUU from Shipped Rom, it happen to me,,and connect ur Buzz (at least it should be turn on, just white scree thats ok) ,,,and just wait, it will return it to the original 2.1 Eclair,,so u can do unrevoked to root ,,CM7 is not stable, i choose wildpuzzle more fasst and stable.
MC

In my experience with ipods, a white screen is usually a hardware issue (ie it needs changing), which seems to be consistent with what you experience (no startup logo).
I hope it is not the case for you, and that your problem will be solved by flashing a different rom.

[Q] Touch screen not working on HD2 using Ultimate Droid 3.2.5

I have been using Ultimate Droid 3.2.5 for a couple of months now and a few days ago i pick up my phone to make a call and the screen doesn't respond when I touch the screen. Only the bottom buttons and volume buttons work. At first, if i I play with the buttons at the bottom i can usually get the touch screen to repond. I tried to wipe data/dactory reset and reinstall rom but now I cant even get it to work like before. Only thing I can do now is answer calls and call back the last person that called me. Has anyone else had this problem?PLEASE HELP!!! Thanks!

Did you eventually find out what cause this issues?
I think my phone is behaving similar, I'm using different Android ROMS for quite a while now, and suddenly without any apparent reason the touchscreen isn't responding very often after waking up the screen. It won't happen if the screen is on and the touch screen is working, only after a wakeup..
Sometimes it's just impossible to get it working again, and I'm forced to wait a while until it decides to respond again. It kinda feels like the phone is forgetting to wake or initialize the touchscreen properly.
ROM and Kernel changes didn't solve this so far.
I think the issues originally started with Typhoons CM7 NIGHTLY 3.7.1 / tytung 12.4v3 for me.

Actually I never found out what the problem was. I just flashed it back to stock and had T-Mobile send me another one. That was in May and actually a few days ago it happened to my phone again. So this time they sent me an HD7. It really sicks that they dont have that phone anymore. Cant do sh*t with this HD7!

Same here the Power Button is the problem, you just have to train yourself not to use it. I use Button Savior and Button Remapper. On my second HD2, luckily T-Mobile sent me a HD2, but that was in like March, right before my one year was up.

Make sure you keep this one working cuz there will be no more HD2! I may find one on Craigslist or something. This HD7 and Windows 7.5 really sucks monkey nuts!!!

tcole said:
Make sure you keep this one working cuz there will be no more HD2! I may find one on Craigslist or something. This HD7 and Windows 7.5 really sucks monkey nuts!!!
Click to expand...
Click to collapse
Yea I played around with WP7 on the HD2 when it first became avaliable and wasn't really worth the time and trouble it took to get it on there. One month later I went back to NAND and haven't looked back.

Same here! Registering Zune was a problem at first.

Thanks for your quick response! Yeah, seems to be a problem with the end button / flex connector of digitizer
I found another helpful thread about this issue: The Infamous Unresponsive Digitizier Screen Possibly Solved!
Obviously you need to replace the digitizer to fix this problem.
I'm sticking to the solution of not touching the button at all, there are apps to turn off the screen and shutdown the phone. At least waking with any other buttons works most of the time for now, but it's not really a long-term solution.

Wish I would have saw that thread b4 i sent my phone back!!!

[Q] Touchscreen not responding

So for some reason, the last few days the touchscreen on my phone was being super slow, and id have to turn off the screen, then turn it back on multiple times and keep trying to slide it to unlock. I dont know how this started. Ive been using the NexusHD2-Gingerbread V2.9.
Ive tried other ROMs and restored previous backups and nothing is working. The screen is still not responsive. Ive never had this happen before and not sure what else to do. Its just stuck on the lock screen but everything is unresponsive....any ideas???

AEBobby912 said:
So for some reason, the last few days the touchscreen on my phone was being super slow, and id have to turn off the screen, then turn it back on multiple times and keep trying to slide it to unlock. I dont know how this started. Ive been using the NexusHD2-Gingerbread V2.9.
Ive tried other ROMs and restored previous backups and nothing is working. The screen is still not responsive. Ive never had this happen before and not sure what else to do. Its just stuck on the lock screen but everything is unresponsive....any ideas???
Click to expand...
Click to collapse
Unfortunately, your touchscreen digitizer is dying. This is related to the hardkey malfunction. The only thing you can so now is flash back to stock WM Tom and send it back for repair. The phone's touchscreen need to be replaced.
Good luck,
Sent from my HTC HD2 using Tapatalk

Try to install everything from scratch and how it goes.
Sent from my HTC HD2 using XDA App

10507 said:
Unfortunately, your touchscreen digitizer is dying. This is related to the hardkey malfunction. The only thing you can so now is flash back to stock WM Tom and send it back for repair. The phone's touchscreen need to be replaced.
Good luck,
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
Yeah thats what ive been reading, and right after i started this thread i was reading on another and read that you can fix it if you hold the power button down firmly (apparently the digitzier is right behind it)....that worked for me.
I think too much flashing and changing ROMS using the power button didnt help hehehe

AEBobby912 said:
Yeah thats what ive been reading, and right after i started this thread i was reading on another and read that you can fix it if you hold the power button down firmly (apparently the digitzier is right behind it)....that worked for me.
I think too much flashing and changing ROMS using the power button didnt help hehehe
Click to expand...
Click to collapse
Try using zMooth or Button Savior. This help your hardkey a lot. Since I have zMooth and Button Savior install on my phone, I no longer have to use the hardkey.

AEBobby912 said:
Yeah thats what ive been reading, and right after i started this thread i was reading on another and read that you can fix it if you hold the power button down firmly (apparently the digitzier is right behind it)....that worked for me.
I think too much flashing and changing ROMS using the power button didnt help hehehe
Click to expand...
Click to collapse
for how long (holding of power button) ????
{edit}
!!!!! FIND SOLUTION !!!!!
The digitiZer is under the hangup button. press the button bit hard till it nudges the digitiser a little. it worked for me.
(found it from : http://www.htcphones.net/htc-hd2-problems-with-touchscreen/ )
I'm so cool now!!

I have been living on this solution for almost 2 months now.
However I can't take it anymore not because I am lazy!
but because when sometimes you need to make a quick call or grab that
camera instantly I tend to waste a good 5 minutes trying to make that hardpress on the end key work with the digitizer cable.
My question is, would changing the digitizer work? or is it something else?
Ever noticed that T-Mobile HD2 has soldered digitizer connection to the LCD vs. flex-cable socket in standard Leo?

HD2 Black screen after a call?

Is there a fix for this? No matter what rom I use, Didn't try Froyo, but after receiving a call, the screen stays black, so I spam the hard keys to wake the screen after about a minute or so. Can anyone help?

Curiousn00b said:
Is there a fix for this? No matter what rom I use, Didn't try Froyo, but after receiving a call, the screen stays black, so I spam the hard keys to wake the screen after about a minute or so. Can anyone help?
Click to expand...
Click to collapse
I have the same problem with 2 HD2 phones. Not aways, but most of the time. I ask this question before - http://forum.xda-developers.com/showthread.php?t=1349809 , but i didn't get the answer.
May be it is hardware problem, but if it is it's gonna make me a problems every time.
If you figure it out, pls PM me.

Once in a while i have the same problem, but when I clean the screen (until it looks shiny ) and it gets better…
(I clean mostly the top of the screen)
I don’t believe it is the “solution” but works for me…

[email protected] said:
Once in a while i have the same problem, but when I clean the screen (until it looks shiny ) and it gets better…
(I clean mostly the top of the screen)
I don’t believe it is the “solution” but works for me…
Click to expand...
Click to collapse
If you push the End button (or any other button) before clean the screen, what happens. Does the screen stays black???
I think that this is a software problem, because other ways every time when I press the End button (or any other button) it will give me Nothing.

luba6ky said:
If you push the End button (or any other button) before clean the screen, what happens. Does the screen stays black???
I think that this is a software problem, because other ways every time when I press the End button (or any other button) it will give me Nothing.
Click to expand...
Click to collapse
[email protected] said:
Once in a while i have the same problem, but when I clean the screen (until it looks shiny ) and it gets better…
(I clean mostly the top of the screen)
I don’t believe it is the “solution” but works for me…
Click to expand...
Click to collapse
luba6ky said:
I have the same problem with 2 HD2 phones. Not aways, but most of the time. I ask this question before - http://forum.xda-developers.com/showthread.php?t=1349809 , but i didn't get the answer.
May be it is hardware problem, but if it is it's gonna make me a problems every time.
If you figure it out, pls PM me.
Click to expand...
Click to collapse
@all I found tht these help. The screen blacks out for about 5 seconds now... its more of a temp fix.
https://market.android.com/details?id=com.keyes.screebl.lite
And
http://forum.xda-developers.com/attachment.php?attachmentid=449922&d=1290758421
Credits go to Quiethinker over on a different thread - http://forum.xda-developers.com/showthread.php?t=1061481
Sent from my LG-VM670 using Tapatalk

black screen after recieving or making a call
Curiousn00b said:
Is there a fix for this? No matter what rom I use, Didn't try Froyo, but after receiving a call, the screen stays black, so I spam the hard keys to wake the screen after about a minute or so. Can anyone help?
Click to expand...
Click to collapse
I have the exact same problem. I am using the SD card android version. I've tried different ROMs, but with all I have this problem. When I boot into WinMo I don't have this problem at all, so it doesn't seem to be hardware related.
I can use the phone with anything else without any problem using the SD android version, only when I recieve a call or call out myself the screen blacks out and the phone seems unresponsive. After about 30 seconds to a minute the phone shows the lock screen.
I would love to work with the Android version for normal operation but because of this I still boot into Winmo within office hours...

erikgee said:
I have the exact same problem. I am using the SD card android version. I've tried different ROMs, but with all I have this problem. When I boot into WinMo I don't have this problem at all, so it doesn't seem to be hardware related.
I can use the phone with anything else without any problem using the SD android version, only when I recieve a call or call out myself the screen blacks out and the phone seems unresponsive. After about 30 seconds to a minute the phone shows the lock screen.
I would love to work with the Android version for normal operation but because of this I still boot into Winmo within office hours...
Click to expand...
Click to collapse
Your better off doing what I did. In Android, sonewhere in the settings for calling, change the sensor to off so it never blacks out. In Miui rom its in program's, then calls.
Sent from my LG-VM670 using Tapatalk

Task 29 and start fresh. Only thing that got rid of it, test when you first start the rom to make sure it works normal, then start adding your apps and such.
Or increase the 125mhz CPU settings to 245mhz under cyanogenmod settings/performance/CPU or governor settings.
Sent from my HTC HD2 using Tapatalk

my screen stay black (off) when i take the phone away from my face EVERY call as well. this is what i do and it works everytime.
1.)pull the phone away from my face (duh)
2.)starting with it facing the sky, i turn it to face the floor (when i say facing i mean screen up ... then screen down)
3.)as soon as i turn it back over (screen face up) it turns on
im thinking its a sensor issue??? either way it works and i dont go on a hardware button mash fest to turn my precious leo back on.
if this helps please send thanks ... if not tell me im crazy :-D

Curiousn00b said:
@all I found tht these help. The screen blacks out for about 5 seconds now... its more of a temp fix.
https://market.android.com/details?id=com.keyes.screebl.lite
And
http://forum.xda-developers.com/attachment.php?attachmentid=449922&d=1290758421
Credits go to Quiethinker over on a different thread - http://forum.xda-developers.com/showthread.php?t=1061481
Sent from my LG-VM670 using Tapatalk
Click to expand...
Click to collapse
I just download this apk and will try it ....
But I think it's hardware problem (may be with the sensor), because when I turn back on Win Mobile 6.5 i have the same problen ...
I think to bring the phone to service
... when I take it back will tell you what is exactly the problem ...

Task 29 then install windows, next install the right radio version , finally install the android

like dragonovus say´s try completly reinstalling android.
and please feedback here

BUILD.PROP baby!!! there is a tweak for this and i believe it works( in the prop ) dont know exact address but google "build prop tweaks" also use setCPU and set the lower number to about 350+ also try to use the end hardware button less cuz this has been addressed in another thread..... the button sticks or sum crap..... i use zmooth and never use the red end button........... good luck

Will try all, but now I use ' Screen stays on '
Sent from my LG-VM670 using Tapatalk

well ... for me Screebl Lite didn't help me

Reinstalling Windows is not necessary. Just make sure you have the right Radio and HSPL then do a task 29 before installing Android. But your problem is most likely hardware related. The end call button is most used and therefore prown the wear and tear... Try using the red end cal softbutton. I guess you only have that problem when you use the hardware button right?
In that case it's the problem with the button and not the software...

And at the end did anyone of u solved this? If u need help post reply or pm me. I think i have a solution for u.
Sent from my HTC HD2 using Tapatalk

PPKLP said:
Reinstalling Windows is not necessary. Just make sure you have the right Radio and HSPL then do a task 29 before installing Android. But your problem is most likely hardware related. The end call button is most used and therefore prown the wear and tear... Try using the red end cal softbutton. I guess you only have that problem when you use the hardware button right?
In that case it's the problem with the button and not the software...
Click to expand...
Click to collapse
Yes, man! I have the HSPL2.08 and radio 2.15.50.14 ... I think we all do. I can't use the soft buttons, because I can't see them. That's is the problem. The screen is black and won't lights up. May be I can't read you ... but I try to run back Win Mobile just to check is it from android OS or the sensor...

build.prop does not help
I tried the build.prop thing. I added those 2 lines at the end of the file:
ro.lge.proximity.delay=25
mot.proximity.delay=25
No change, still a black screen after any call.
Any other idea ? How to completely deactivate the proximity sensor ?

Fixed !
I finally fixed the issue by removing the screen protector sheet and cleaning the upper left part of the screen with a dry towel.
It works fine now. It was just a problem of the proximity sensor not being exposed enough.
I hope this helps.

Help! Cannot unlock screen, touch function not working.

Has anyone of you guys encountered the same issue with your HTC HD2? Care to share the fix you did? Would this mean bye-bye to my HD2 already?

jutsstuj said:
Has anyone of you guys encountered the same issue with your HTC HD2? Care to share the fix you did? Would this mean bye-bye to my HD2 already?
Click to expand...
Click to collapse
If a clean install (task 29) doesn't help, then I guess you have no other option than sending it for reparation.

It seems like there is a limited life span on the touchscreen. Mine died in October, and I had to buy a replacement because nothing I did fixed the problem.

I had the same issue as you, but in my example touchscreen is slowly dying. For example I can't wake up the phone pressing right (red) button. So I learned that using any other button will not cause freeze of screen. I also discovered that if you gently slap your phone on hand, magically screen starts responding. Weird, but it's ‘working’ like this since 5 months so far.

I just encountered this problem with my HD2 as well. It seems that this is a fairly common issue. Apparently the digitizer for the touchscreen is located directly beneath the red power button and has a tendency to lose its connection.
For me, holding the red power button down with some force for about 5 seconds fixed the issue. Is this temporary? Perhaps, but it has worked just fine for a few days now. Try that out.

Can't Unlock the Phone..
I am having the same problem..I can't unlock the phone..No matter what android Rom I installed.I tried to removed the lock screen and the touch stopped working..But when the phone restarts and you put you pin etc,I can use the phone normally..but when it goes black and trying to turn it on again nothing works on the screen..
Though the hard buttom works..Home screen etc..but can't get the touch to work after the screen goes black!

It's not rom related
I have installed WM6.5 (Stock), Android GB, Android ICS, Android JB But the problem appears to be the same in all
when I press Red button touch doesn't work any more
I would go with digitizer theory
BUT my question is this:
is it gonna get worse? cause for now as long as i avoid Red button everything is OK :good:
and I love my HD2 but if getting worse is possible I have to get rid of it :crying:

Well i had the same problem.now my phone has been to the service centre for reparing
Sent from my LG P350 using xda premium
P.S. my HD2 got a dead touchscreen.so using this this till the HTC guys fix it

Anurag pandey said:
Well i had the same problem.now my phone has been to the service centre for reparing
Sent from my LG P350 using xda premium
P.S. my HD2 got a dead touchscreen.so using this this till the HTC guys fix it
Click to expand...
Click to collapse
Funny (or sad) thing is we don't have an official service center here
so only option is to replace it or sell it as the way it is

Try this:
Lock the screen normally, screen turns off. (Power button)
To turn it on again by pressing any other screen buttons other than the power button. (DONT USE THE POWER BUTTON TO DO THIS)
I found that if I do it this way, the screen runs normal.