[SIM-UNLOCK] All One Varients[WIP] - One (M7) General

[Thread will be back up]
This Thread is a WIP Thread open for discussion.
Please be patient, it IS being worked whether it's discussed or not in the thread.

Subscribe already

Oh, it's Christmas in June. :highfive:

ooooh this sounds interesting

Looking forward to this
Sent from my HTC One using Tapatalk 2

18th.abn said:
UNDER CONSTRUCTION
Big Thanks to all the devs who brought us all s-off. Its all because of their HARD work.
Beaups
Fuses
Revolutionary.io
anyone else working in the background ot that im unaware of at this time
Thank you to fnoji111 for providing the temporary hboot we are going to be using here.
S-OFF is MANDATORY. if you aint got it, git it!
WARNING - This is a simple procedure but can and will brick a device if the steps are not followed or if you explore deeper than you should during the Unlock. I am not responsible for any damage and HIGHLY suggest following all the steps through until the end.
Click to expand...
Click to collapse
Eagerly waiting to see how you gonna do it for sprint version in which we can't get any prompt to put unlock code.

i will give a shot here using my htc one sprint fill post a new feedback after im done
------
i got this error on flashing
C:\Users\XXXX\Downloads\Compressed\Root_HTC_One_Sprint\Root_HTC_One_Sprint>fastboot flash hboot enghboot.nb0
sending 'hboot' (2080 KB)...
OKAY [ 0.463s]
writing 'hboot'...
FAILED (remote: not allowed)
finished. total time: 0.499s

solnoy said:
i will give a shot here using my htc one sprint fill post a new feedback after im done
Click to expand...
Click to collapse
Do it?
---------- Post added at 07:39 PM ---------- Previous post was at 07:31 PM ----------
sending 'hboot' (2080 KB)...
OKAY [ 0.450s]
writing 'hboot'...
FAILED (remote: not allowed)
finished. total time: 0.484s
???

here is my info on my Htc One (Sprint)
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 1.00.20.0315
version-cpld: None
version-microp: None
version-main: 1.29.651.7
version-misc: PVT SHIP S-OFF
serialno: FA34AS9XXXXX
imei: 9900014656xxxxx
meid: 99000146xxxxx
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: SPCS_001
battery-status: good
battery-voltage: 3901mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT

I will update op. Must be on fuses Moonshine hboot. He has a lot of work in the hboot and flashing restrictions are removed. With his hboot, the red text is also removed from splash screen.
I apologize, moonshine s-off/hboot is mandatory.

@18th.abn
Is that engineering hboot safe to just leave it on the phone permanently? I would love to have a permanent eng hboot than a normal updated hboot.

18th.abn said:
I will update op. Must be on fuses Moonshine hboot. He has a lot of work in the hboot and flashing restrictions are removed. With his hboot, the red text is also removed from splash screen.
I apologize, moonshine s-off/hboot is mandatory.
Click to expand...
Click to collapse
So thats why it didnt take

18th.abn said:
I will update op. Must be on fuses Moonshine hboot. He has a lot of work in the hboot and flashing restrictions are removed. With his hboot, the red text is also removed from splash screen.
I apologize, moonshine s-off/hboot is mandatory.
Click to expand...
Click to collapse
I used revone to S-off would you mind a quick and dirty explanation of how to install the moonshine Hboot Manually if that's possible?

problem right now is i dont have linux to flash that moonshine

Sorry gunny, all I can do is link to their work. Any modification/alteration of their work isn't supported or allowed. Wish I could help more there :-/

18th.abn said:
Sorry gunny, all I can do is link to their work. Any modification/alteration of their work isn't supported or allowed. Wish I could help more there :-/
Click to expand...
Click to collapse
No worries.
Doesn't hurt to ask, so I asked

Oh well. thanks for the work.

Riyal said:
@18th.abn
Is that engineering hboot safe to just leave it on the phone permanently? I would love to have a permanent eng hboot than a normal updated hboot.
Click to expand...
Click to collapse
It's highly unrecomended. Device won't fully boot on some varients. Also, moonshine has all the benefits of eng hboot without the added danger of tinkering to much in the eng hboot

can i run moonshin even though im already unlocked?

18th.abn said:
It's highly unrecomended. Device won't fully boot on some varients. Also, moonshine has all the benefits of eng hboot without the added danger of tinkering to much in the eng hboot
Click to expand...
Click to collapse
Yeah that's what I thought lol! So then I would ask the 2nd question... On what variant did this eng hboot came from?
And another thing... Couldn't you just dd the eng hboot instead of flashing it through fastboot? Did took a quick glance on moonshine distiler binary and seems like they're doing the same.
*Edit removed for safety of newbies *

Related

stuck at hboot 1.76.0007, pls help!!!

[SOLVED!!!!!!!!!!!!!!!!!!!]
Hi all,
I kida stcuk at hboot 1.76.0007 after trying to run Singapore official RUU. so stupid of me.
I can't go into recovery mode, whatever button I press, it will go to hboot.
If I flash singapore RUU, I got old version error.
If I use other RUU, same image which is 3.05.xxx , I got ID error.
I copied the roo1.zip and renamed it to SAPPIMG.zip into sd card, but can't go into recovery mode.
and cannot fastboot as there is S-ON.
So anyway to rescue my magiic? mine is 32A
previously I know rules on flashing, but I bought HD2 4 months ago and lost track with magic. so all screw up.
Pls help me. Thanks a lot for your time.
Best,
Thihaz
Can you go into the system?
If not, did you make a goldcard?
Post all fastboot info here..all!
mumilover said:
Can you go into the system?
If not, did you make a goldcard?
Post all fastboot info here..all!
Click to expand...
Click to collapse
what do you mean the system? the only place I got is hboot.
I have created one or 2 previously, so yeah I got one at least. The thing is it does not go anywhere.
these are the fastboot errors:
======START=====
C:\AndroidSDK\tools>fastboot flash radio Radio_HTC_PVT_32A_6.35.10.18.img
sending 'radio' (21376 KB)... OKAY [ 4.891s]
writing 'radio'... INFOsignature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 10.016s
C:\AndroidSDK\tools>fastboot flash hboot hboot-1.76.2007.img
sending 'hboot' (512 KB)... OKAY [ 0.422s]
writing 'hboot'... INFOsignature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 0.547s
C:\AndroidSDK\tools>fastboot flash recovery recovery-RA-hero-v1.5.2.img
error: cannot load 'recovery-RA-hero-v1.5.2.img'
C:\AndroidSDK\tools>fastboot flash recovery recovery-RA-Magic32A-6.35-v1.6.2.img
sending 'recovery' (4166 KB)... OKAY [ 1.375s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 2.375s
C:\AndroidSDK\tools>
=======END=====
EDIT: it seems to me that SD card is not detected.
Thanks a lot for your time.
Thanks.
Thihaz
Your using a perfected SPL which is why your getting the remote not allowed error. Try running the RUU with the goldcard in the phone.
Sent from my HTC Magic using XDA App
DonJuan692006 said:
Your using a perfected SPL which is why your getting the remote not allowed error. Try running the RUU with the goldcard in the phone.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
yup. I tried running different RUU with goldcard in the phone, But what is the connection between goldcard and RUU?
what i can think of is either sd card is not detected or colume key or home key is dead that's why i cannot flash sappimg.zip from sd card.
anymore suggestions?
thanks a lot for your time.
thanks
thihaz
If I'm not mistaken the RUU pushes the files to your SD card before running the commands to flash them to the phone but I could be way off base. The other possibility besides it not picking up the SD card is that your goldcard is jacked up. You could borrow a friends Android phone and try making another one.
Sent from my HTC Magic using XDA App
DonJuan692006 said:
If I'm not mistaken the RUU pushes the files to your SD card before running the commands to flash them to the phone but I could be way off base. The other possibility besides it not picking up the SD card is that your goldcard is jacked up. You could borrow a friends Android phone and try making another one.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
ah I didn't know that. before things screwed up, I got an eng spl 2007 and new radio with a customised rom, i think cyanogen.
My understanding is that at least it should read the files from sd card but it looks like volume key is dead.
let me try with other sd card and see how it goes.
Thanks for your time mate.
Thanks.
Thihaz
Ok, I have tried with 3 cards, 1GB,2GB and 8GB.
1GB and 2GB have been used as a goldcard.
But this time no luck, nothing happened when I pressed
volume down + power
home + power
back + power
It was still going to hboot RUU. I think need to send it to HTC. Sigh!
Any idea or suggestion would be appreciated.
Thanks
thihaz
I have managed to fix the phone!!!!!!!!!!
I should have digged inside xda more before I sent my phone to HTC service centre to pay SGD30.
They said my main board was damaged and needed a replacement with SGD360!!! FCUK!
I straight away said NO!!!. Gimme back my phone.
That's it. Because I digged xda forum and found a very very positive solution.
So I wanted to give it a try, that method is, yes, using Gold card.
Let me tell you how I did it.
My magic is spoilt so that there is no way I can get CID of memory card.
So I followed this instruction using Ubuntu to get CID
http://forum.xda-developers.com/showthread.php?t=656798
but somehow I still cannot get the cid.
But Luckily I have HTC HD2, yes I can run android on it (thanks the genius ppl here)
So I formatted my memory card, put android folder as usual and run it.
Voila!! now I got my cid when I run adb command.
and I followed this instruction creating gold card which I have done it a thousand times before -> http://forum.xda-developers.com/showthread.php?t=572683
And used this RUU
RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_ NoDriver
(I used this RUU, because my data image version is 3.05, I cannot use lower than that, I think you know what I mean)
It fcuking worked. yes. pls excuse my language because I am so happy for my resurrected phone.
And thank you so much for the genius people here and xda.
Now we know that HTC sucks or they just want money!!!
Mod: How can I change that title to put [Solved] in front? or Can you help me change for those who had the same problem as me?
Thanks everyone.
Best,
thihaz

[Q]Screwed up beyond belief.

Should have just left my phone alone, it was working fine the way it was. Anyway, I flashed a bad SPL/RADIO combo and things just don't work anymore. I can get on Fastboot, but when I try to use it it says "remote not allowed," horrible. So, I can't boot into recovery or regular. I'm stuck with fastboot.
I've read multiple old threads about this, but I don't know if there is any new method to fixing it? Besides getting a new phone?
Hi, I try to help if i can, it will be good if you let members know your phone details like eg. 32A or 32B o fender 1.2, current radio and spl. What you did to flash the radio and spl. Do you have androidsdk on your computer coz you can push thru adb while your phone is in fastboot mode. Can also try searching using the keyword "unbrick" thru the general thread. Hope this helps.
Your not bricked. Need all your information from fastboot.
Sent from my HTC Glacier using Tapatalk
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013
CPLD-13
RADIO-6.35.16.19
I have the sdk and other various tools. I flashed the wrong combo and tried to repair with sappimg.zip. It restored me to the current settings above.
Before I was:
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.76.2007
CPLD-13
RADIO-6.35.16.19
;
sounds like your have a Magic 32a. You flashed a perfected SPL of 1.33.0013 which is only for 32b/mytouch 1.2 32a hybrids. This SPL does not have ability for fastboot. You will need to either flash your new SPL via recovery or via Goldcard.
I'm going to try the goldcard method.
Update: How would I get the CID for my phone through Fastboot?
Use a friends phone?
Sent from my Gingerbread on Sapphire using XDA Premium App
Not a bad idea, does he need to have the same phone?
You can't get the SD card CID from fastboot. Man did you screw up. First and foremost you have a myTouch 1.2 which there is a stickied thread on the first page about. Secondly, you screwed yourself trying to use the sappimg. You had an engineering SPL before so you could have just flashed the correct SPL/radio combo from fastboot and would have been good to go. Now you'll have to make a goldcard and flash a new sappimg that will flash back a 32A SPL thatbis compatible with that radio, and then flash the correct ones. I've only seen that done once by mumilover but he hasn't been around for a while and I don't know when he'll be back. Still go ahead and make the goldcard. You'll need to borrow a working Android phone from someone to do that part.
Sent from my HTC Glacier using Tapatalk
Sorry been gone for a while... got a newborn child :0)
You know.. family first, android second!
For the OP. Run this command:
Code:
fastboot getvar version-main
Congratz man. When I ran that command I got:
version-main: 2.10.531.4
Your lucky day...
Follow this post: http://forum.xda-developers.com/showpost.php?p=11946470&postcount=30
From this thread: http://forum.xda-developers.com/showthread.php?t=968829
But on the last step you need a different rom... wait i'll upload it
Here you go:
http://rapidshare.com/files/454052569/2.10.531.4.zip
Use ths above instead of the nbh file i had... it's the stock file for your device.
NB: as i wrote.. if you succeed in getting the eng spl (1.33.2010) then you have no need for this file... then just post the fastboot info here and wait for instructions... i'm sure that DonJuan692006 will take good care of you
mumilover said:
Here you go:
http://rapidshare.com/files/454052569/2.10.531.4.zip
Use ths above instead of the nbh file i had... it's the stock file for your device.
NB: as i wrote.. if you succeed in getting the eng spl (1.33.2010) then you have no need for this file... then just post the fastboot info here and wait for instructions... i'm sure that DonJuan692006 will take good care of you
Click to expand...
Click to collapse
Forgot to tell you need to rename it to sappimg.zip
And I need the GC?
Mr. An0nym0u5 said:
And I need the GC?
Click to expand...
Click to collapse
What? 10 char
Mr. An0nym0u5 said:
And I need the GC?
Click to expand...
Click to collapse
Yes you need a gold card
I need the Goldcard for the post that mumilover came up with?
Yeah, pardon me. Closing on a house in two days so my head isn't all there.
Thank you all. :]

Can't have S-OFF

I've tried everything and I can not get S-OFF. I do all the tutorials and there is no way to manage to get on my Magic S-OFF.
Someone help me? I searched the forums but there is nothing similar.
I have:
Hboot 1.76.2007
CPLD 12
Radio 6.35.08.29
I tried switching to another radio, but when I fastboot gives me error: failed <remote: signature verify fail>
thank you
Juwper said:
I've tried everything and I can not get S-OFF. I do all the tutorials and there is no way to manage to get on my Magic S-OFF.
Someone help me? I searched the forums but there is nothing similar.
I have:
Hboot 1.76.2007
CPLD 12
Radio 6.35.08.29
I tried switching to another radio, but when I fastboot gives me error: failed <remote: signature verify fail>
thank you
Click to expand...
Click to collapse
Try flash stock rom again by following this manual: http://forum.xda-developers.com/showpost.php?p=5526163&postcount=1
Download Hboot 1.76.2007 from 4shared: http://www.4shared.com/file/G3v1xc0I/update-hboot-1762007-signed.html
Use patched recovery: http://www.4shared.com/file/_JJa2Chb/ra162_635.html
When you will flash hboot (from recovery) - follow instructions on screen. Don't reboot until text will appear...
Still can't have S-OFF
Thanks for your reply.
I tried what you told me, but couldn't do it.
The phone is rooted, I installed DietGingerbread and everything is working, but I have problems with battery (drains in about 1 day without doing anything, just being turned on - already callibrated it), my Bluetooth also doesn't work, I try to turn it on but it turns off automatically.
Any other help?
Thank you
I think, it's problem with this custom rom only. Try another...
Thank you for your replies.
I don't think it is the ROM. Let me post what is my feeling about it. My feeling is only for what I sense, not from any other knowledge, I am pure amateur.
Problems came out when I installed CM 7.2 and clicked fix permissions on ROM Manager. After that, phone got lots of problems, so I thought...better to install everything new from scratch so I put the latest RUU oficial from HTC and wanted to do the whole routine to root and take S-OFF.
The thing is I never could put S-OFF anymore, and believe me I tried everything...and asked a friend for help who couldn't do it as well.
Now my problem is this:
Battery lasts less than 1 day without any major use, not even internet or wifi.
Bluetooth doesn't work
Think kernel might have anything to do with this? I have carz latest kernel. Is there a way to bring the original kernel back?
Thanks for the help guys, I really need it!
same problem, please help
Use fastboot commander
fast boot commander thread
good luck
Juwper said:
Thank you for your replies.
I don't think it is the ROM. Let me post what is my feeling about it. My feeling is only for what I sense, not from any other knowledge, I am pure amateur.
Problems came out when I installed CM 7.2 and clicked fix permissions on ROM Manager. After that, phone got lots of problems, so I thought...better to install everything new from scratch so I put the latest RUU oficial from HTC and wanted to do the whole routine to root and take S-OFF.
The thing is I never could put S-OFF anymore, and believe me I tried everything...and asked a friend for help who couldn't do it as well.
Now my problem is this:
Battery lasts less than 1 day without any major use, not even internet or wifi.
Bluetooth doesn't work
Think kernel might have anything to do with this? I have carz latest kernel. Is there a way to bring the original kernel back?
Thanks for the help guys, I really need it!
Click to expand...
Click to collapse
Man, you wrote too many words and i'm confusing with it (s-off, custom, kernel, bluetooth... what a mess!)... what EXACTLY do you want first? Do you still want get S-OFF???
To get S-OFF you must follow manual in second post of this topic...
What problems do you have with this manual? Did you flash rom? Did you flash custom recovery? Did you flash engineering hboot?
Sorry for all the words, but I have lots of problems with my Magic.
After that ROM Manager Fix Permission thing, my phone is a mess!
I tried every tutorial on the web and S-OFF is not there. Flashed ROM, installed custom recovery (tried with some of them) and when I flash eng hboot nothing happens. I restart the phone but S-ON is still there.
My friend tried it as well but no S-OFF comes out.
I still want S-OFF, I think after that problems should be solved, but I wrote the other problems because it could help you help me.
Thanks again for your patience
Wait, wait... Here is checklist.
0. Does your SPL-info in first post changed by something? You must have 1.76.XXXX / 6.35.XX.XX to get S-OFF...
1. Did you install custom recovery AmonRa 1.6.2 patched by cursordroid? I posted link in second post...
2. Reboot into recovery (Home + Power) - what version do you see?
3. Did you download hboot 1.76.2007 from my post?
4. Copy 1.76.2007 zip-file to root of sdcard, boot into recovery and choose 'flash zip from sdcard', point to this archive and follow instructions...
5. After all, turn phone off, then turn on by pressing Back + Power... what SPL-info now? Write first 5 rows (all symbols are important)
Yes, I did all that on the first reply you told me.
Right now I have:
SAPPHIRE PVT 32A ENG S-ON H
HBOOT-1.76.2007 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Aug 21 2009, 18:19:15
Thanks
Too sad to be truth...
Perhaps, things like gfree or incfree can help... but there is no gfree for Magic/Sapphire.
Here are incfree sources:
https://github.com/tmzt/g2root-kmod/tree/master/guhl
To build version that is compatible with Sapphire/Magic we need change some code (memory addresses, partition names and etc..) or we need find coder who will change this code.
I'll show you some magic :0)
Issue this command from fastboot and you will have your s-off:
Code:
fastboot oem eraseconfig
Enjoy :0)
---------- Post added at 12:12 PM ---------- Previous post was at 12:06 PM ----------
To everyone else:
Try to not mix things together.
There are many settings that have nothing to do with ROMs.
The above example is perfect. He could flash as many roms he wanted... he will still be s-on. That's because the secu.flag was set in "bios" of the phone... The reset command should take care of that... but we are changing things in bios... not in the OS.
I could write a full article to show case my point... but does not have the time..
I hope the words are of little help :0)
Thanks for the tip, but here's what I got:
D:\roottools\windows>fastboot oem reset
... FAILED (status read failed (Too many links))
finished. total time: 0.000s
Type this and post the output
Code:
fastboot oem h
D:\roottools\windows>fastboot oem h
... INFOcommand list
INFOmb
INFOmh
INFOmw
INFOew
INFOeh
INFOeb
INFOmmu
INFOram_test
INFOjump
INFOtest
INFOsdtest
INFOeraseconfig
INFOwriteconfig
INFOreadconfig
INFOwritesku
INFOreadsku
INFOrflash
INFOtflash
INFOerasesd
INFObtrouter
INFOtick
INFOheaptable
INFOemapi
INFOemapiTest
INFOemapiCountryID
INFOemapiWlanMac
INFOemapiSetDefCal
INFOemapiReadCal
INFOlr
INFOimgcrc
INFOresetautoimage
INFOresetRUUflag
INFOwriteserialno
INFOreadserialno
INFObattcheck
INFOgotofastboot
INFOwritemid
INFOusbtestmode
INFOeraseWifiFlash
INFOpowertest
INFOerase
INFOreadmbserialno
INFOlistpartition
INFOerasebcid
INFOwritebcid
INFOreadbcid
INFOfmrouter
INFOresetuP
INFOeraseEeprom
INFOwifiDisarrayEeprom
INFOshowEeprom
INFOtestEeprom
INFOcheckEeprom
INFOwMfgTp
INFOrMfgTp
INFOsave2sd
INFOgpiow
INFOgpior
INFOmddiw
INFOmddir
INFOclock
INFOi2cr
INFOi2cw
INFOkeytest
INFOheap
INFOboot
INFOreset
INFOpowerdown
INFOrebootRUU
INFOtask
INFOenableqxdm
INFOrtask
OKAY [ 0.094s]
finished. total time: 0.094s
My bad... i gave the wrong command...
use this one
Code:
fastboot oem eraseconfig
Then reboot...
It's like 1 year ago i last used that command... my memory failed my... sorry :0)
I have S-OFF!
Thank you guys for your help.
Now i'll have a search at the bluetooth and battery problems.
I now have S-OFF back!
I told you... it's magic :0)
The bt and battery problems are ROM related. Try another ROM. (Roms come with new kernels).
Sent from my PG86100 using XDA App

Trouble returning to S-On/stock... (and I've really tried!)

Hiya,
Hope somebody can help… I’ve spent the last few hours searching these forums and trying various methods but I just can’t change the CID in my Wildfire .
Basically I want to return my phone to complete stock. I couldn’t change the CID at all (ever) and was on HBOOT 0.80 so upgraded that to 1.01.0001 and used the Revolutionary package to get S-OFF (and I thought SuperCID or other CID).
I have successfully got S-OFF and flashed the stock ROM that I want (RUU_Buzz_Froyo_HTC_WWE_2_22_405_1_Radio_13_55_55_24H_3_35_20_10_release_160191_signed.exe) but for the life of me I can’t change the CID to HTC__001.
I’ve tried everything but for some reason am having trouble writing from fastboot command. Here’s what I’m doing/getting:
C:\adb>adb devices
List of devices attached
HT06GPY07353 device
C:\adb>adb reboot bootloader
C:\adb>fastboot oem writecid HTC__001
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.016s]
finished. total time: 0.016s
Honestly, I’d be massively grateful for some pointers in getting S-ON back and returning to complete stock.
Thanks
How did you change your Cid? Did the phone come unlocked? Revolutionary doesn't change your Cid only s-off. If you use a ruu to get back to hboot 1.01.0001 then you will be back at stock, but your Cid is difficult to change without a xtc clip to give true s-off. So how did you change yours???
sent from my android powered. tank using xda premium B-)
I havent managed to change the CID because I can't seem to write adb/fastboot commands to the phone.
The phone came unlocked but with Vodafone branding.
Want I want to do is return to S-ON as well as stock ROM but apparently I need to issue the command "fastboot oem writesecureflag 3" to do that.
Thanks.
MrGansburg said:
I havent managed to change the CID because I can't seem to write adb/fastboot commands to the phone.
The phone came unlocked but with Vodafone branding.
Want I want to do is return to S-ON as well as stock ROM but apparently I need to issue the command "fastboot oem writesecureflag 3" to do that.
Thanks.
Click to expand...
Click to collapse
try this.
http://forum.xda-developers.com/showthread.php?t=1160251
no write secure flag command is need and neither should be a change of cid
good luck
Thanks very much, that did the trick
Glad to help,
sent from my android powered. tank using xda premium B-)

CWM / TWRP and Rom

if you search CWM or TWRP or Backup from Rom look on this Page
HTC-Desire-626G-Development
There is also a description for SuperSU
How much R these phones?; could u use it any phone company??
How much R these phones?; could u use it any phone company?? ?:silly:
Joolie ah Gross said:
How much R these phones?; could u use it any phone company?? :silly:
Click to expand...
Click to collapse
You can get them for around 80$usd. It is unlockable out if the box but you may have to take it to a metro/T-Mobile store to help you with that. But it should work with any gsm carriers for the most part (at&t/T-Mobile/cricket/metro/etc.)
Htc 626 a32_ul boot.img
i soft bricked my phone and downloaded many boot and recovery images and roms and ruu trying to fix my htc626 a32_ul qualcomm 410 type phone , been nightmare that looked impossible to fix and waiting here trying find a root or fix have learnt a lot about andriod these last few weeks
anyway did realise that after learning what i should be looking for i knew it should be in file named
0PKXIMG_A32[email protected]50720.2C_17.00_018_F_release_446349_combined_signed.zip
source found at IR-file.com
my htc 626 phone gehtc version all gives output of :-
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.02.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: CC592YM02455
(bootloader) imei: ***************
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: a32_ul
(bootloader) platform: hTCBmsm8916
(bootloader) modelid: 0PKX20000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: b7436e99
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name: 1001
bootloader is unlocked
a32_ul pvt ship s-on
i installed your rom onto sd-micro card, then when booting into bootloader i get the rom installing
but get this inforamtion onscreen showing image update fail saying no image or wrong image
sd checking...
no gift file...
loading...(0PKXDIAG.zip)
No image!
loading...(0PKXDIAG.nbh)
no image or wrong image !
loading...(0PKXIMG.zip)
....
....
....
Device halted due to large Image update fail
Press <POWER> to reboot.
!! Image Update FAIL !!
then when I unzipped file and took out boot_signed.img
used htc_fastboot flash boot boot_signed.img then rebooted phone
its alive im back in stock :laugh::laugh::laugh:
boot.img used here [
htc fastboot files used
is such a relief to have my phone back up and working still not rooted but working in stock firmware hope this post may help any other lost souls in the soft bricked nightmare lol
oh dea
o prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
i have link to files but unable to post till 10 posts
regards from Frankgambit
i have boot img for anyone who wants it darn this s-on htc thing what pain in neck for ppl i still want root but now phone up and running again i can wait for definite solution to be found and now free to experiemnt now as i have fail safe repair any eorrors that may cause soft brick now.
---------- Post added at 10:03 PM ---------- Previous post was at 09:41 PM ----------
frankgambit said:
i have boot img for anyone who wants it darn this s-on htc thing what pain in neck for ppl i still want root but now phone up and running again i can wait for definite solution to be found and now free to experiemnt now as i have fail safe repair any eorrors that may cause soft brick now.
Click to expand...
Click to collapse
also another thing is if i brought a 8 gb htc 626 then i assume the free space left on phone would be say 3gb on main internal memory left to use.
so i pay for 16 gb and what do i get not a lot more than before and still only 6 or 7 gb free space on phone after bloat-ware , unable to remove or move such bloat-ware and other apps to external sd card until find method for root
this seems like a recurring makers inbuilt problem caused by manufacturers same like when ibm chose the memory size of first pc so to maximise profit selling 16 kb chips, then cpu need for access to ever larger memory space made there original model impracticable. i think this is deliberate so that they can sell there top end phones with loads internal memory at more higher price. what i would like in phone is phone with 2 sd slots one slot for etreme sd card double port for application to run from or store , and then another sd card for media files for audio or films and pictures to be stored on and of as largest size possible but maybe not so fast if price of speed or data transfer over size consideration.
i see *exception in specs htc626 could use 2 TB of storage space but is limited to 128 gb by operating system of android 5.1 , and yet see maybe android 6.0 maybe allows up-to 512 gb.
root is only way cure this bloatware problem for now and yet even so i have paid for my hardware i am not allowed to make full use of the hardware by restrictions placed on my phone by the manufacturer desire to force me to buy the more expensive models. that have more free internal memory.
i was going to wait till monday before attempting too root phone, but now i feel safer in that i can recover phone from soft brick possibility , i have decided to go through all the one click apps again that i tried using blindly before ,, but now with eyes wide open to the possible pitiful and knowledge i can recover to stock boot again . lets go again as the gains from having rooted device far out weighs the drawbacks of having useless unrooted device as far as i am concerned.
frankgambit said:
i was going to wait till monday before attempting too root phone, but now i feel safer in that i can recover phone from soft brick possibility , i have decided to go through all the one click apps again that i tried using blindly before ,, but now with eyes wide open to the possible pitiful and knowledge i can recover to stock boot again . lets go again as the gains from having rooted device far out weighs the drawbacks of having useless unrooted device as far as i am concerned.
Click to expand...
Click to collapse
you have to relock your device on fastboot to be enable to restore with RUU, belive me, i did the same with a M&, ne max and one 626s, i was like crazy why got error until i found that relocking bootloader then I was able to restore with RUU in some minutes.!

Categories

Resources