my samsung galaxy s4 is not detecting on odin even with the drivers
i tried my SGS2 and it detects normally as modem on device manager and on odin
some help ?
slytidar said:
my samsung galaxy s4 is not detecting on odin even with the drivers
i tried my SGS2 and it detects normally as modem on device manager and on odin
some help ?
Click to expand...
Click to collapse
Same with mine. I restored my phone via nandroid restore, but got stuck at Samsung Boot logo. Then tried to connect it to ODIN, it didn't work.
TheSinister said:
Same with mine. I restored my phone via nandroid restore, but got stuck at Samsung Boot logo. Then tried to connect it to ODIN, it didn't work.
Click to expand...
Click to collapse
Odin only works in DOWNLOAD MODE
Joku1981 said:
Odin only works in DOWNLOAD MODE
Click to expand...
Click to collapse
I forgot to mention, but, I tried connecting it in download mode only... It doesn't show in it.
TheSinister said:
I forgot to mention, but, I tried connecting it in download mode only... It doesn't show in it.
Click to expand...
Click to collapse
Can u make a screenshot of Odin when u conect ur phone in download mode to ur pc? Ty :highfive:
Why have you necroed a 6 mth old thread when you have had a thread going about this issue since earlier today ? (not you Joku, the person you responded to).
Mod Edit
As MistahBungle says, one thread at a time is enough.
Thread closed
malybru
Forum Moderator
Related
Hi guys i was just flashing my stock 4.2.2 rom for warranty purposes with odin, and the process has just failed half way, The usb made a sound as it got disconnected even though the phone was untouched. What do i do at this stage? is my phone bricked? i have attached below what happend in odin, can someone tell me what to do? i am stuck here and have not disconnected my device yet. Should i hit the start button again? please help me, thanks
kuljit55 said:
Hi guys i was just flashing my stock 4.2.2 rom for warranty purposes with odin, and the process has just failed half way, The usb made a sound as it got disconnected even though the phone was untouched. What do i do at this stage? is my phone bricked? i have attached below what happend in odin, can someone tell me what to do? i am stuck here and have not disconnected my device yet. Should i hit the start button again? please help me, thanks
Click to expand...
Click to collapse
- Install Odin 3.09 and update ur drivers: HERE
- Try to flash ur stock rom with other USB port
Joku1981 said:
Install Odin 3.09 and update ur drivers: HERE
*EDIT: I dont know if u know this but u cant come back to 4.2.2 if u are in 4.3
Click to expand...
Click to collapse
Hi mate, my phone is currently connected to laptop in download mode, and the blue bar is half way and not moving as odin failed. What do i do at this stage? could you please give me some instructions? like shall i disconnect the usb cable? do i restart phone? what am i actually suppose to do in this state? please help. thanks as i dont want the phone to brick. I am on 4.2.2 btw already.
kuljit55 said:
Hi mate, my phone is currently connected to laptop in download mode, and the blue bar is half way and not moving as odin failed. What do i do at this stage? could you please give me some instructions? like shall i disconnect the usb cable? do i restart phone? what am i actually suppose to do in this state? please help. thanks as i dont want the phone to brick. I am on 4.2.2 btw already.
Click to expand...
Click to collapse
Easy.
1. Take ur battery off now for 1 min
2. Put in it again
3. Go to DOWNLOAD MODE
4. Close Odin in ur computer
5. Install Odin 3.09 & open it
6. Try to flash the same firmware android 4.2.2 with other USB port
Joku1981 said:
Easy.
1. Take ur battery off now for 1 min
2. Put in it again
3. Go to DOWNLOAD MODE
4. Close Odin in ur computer
5. Install Odin 3.09 & open it
6. Try to flash the same firmware android 4.2.2 with other USB port
Click to expand...
Click to collapse
Thank you, will try and report back.
kuljit55 said:
Thank you, will try and report back.
Click to expand...
Click to collapse
Hello Sir, with odin 3.09, i cant see a PDA box, which one am i suppose to use?
Same thing happend to me try this as of #6
IT WILL WORK
follow the Steps
http://forum.xda-developers.com/showthread.php?t=2594483
kuljit55 said:
Hello Sir, with odin 3.09, i cant see a PDA box, which one am i suppose to use?
Click to expand...
Click to collapse
PDA is now AP
you cannot move to 4.2.2 after updating to 4.3.It will definitely fail
Sent from my GT-I9500 using XDA Premium 4 mobile app
Thankyou very much joku1981, following your steps done the job. Cheers
Sent from my GT-I9505 using xda premium
I have recently purchased a new PC, installed all drivers and now can't flash anything (custom recovery or official firmware)
Any ideas what has gone wrong?
I will attach 2 pictures. 1 showing the first error (no pit partition) and the 2nd with the pit still not working.
Please help
Is your phone in DOWNLOAD MODE? What version of ODIN u used?
Joku1981 said:
Is your phone in DOWNLOAD MODE? What version of ODIN u used?
Click to expand...
Click to collapse
Yes I'm in download mode. Using Odin 3.09.
CyberTbag said:
Yes I'm in download mode. Using Odin 3.09.
Click to expand...
Click to collapse
try a different cable/port
Repulsa said:
try a different cable/port
Click to expand...
Click to collapse
Only have 1 cable and I've tried all the USB ports
I had the error in your 1st pic, and like Repulsa says....the unused cable from my tab3 made it work.
Is there any connecting/disconnecting beeps grom pc if you move the cable up and down a touch?.
theunderling said:
I had the error in your 1st pic, and like Repulsa says....the unused cable from my tab3 made it work.
Click to expand...
Click to collapse
Guess I'm gonna have to find a new cable :/
Oh well, cheers anyway
CyberTbag said:
Only have 1 cable and I've tried all the USB ports
Click to expand...
Click to collapse
After checking your screenshot , why do you flash the kitkat 4.4.2 with a pitfile on it?and untick Repartion.. Flash only the FNB8.Home.tar mate . I encounter this issue once and the fix was changing the Port
Repulsa said:
After checking your screenshot , why do you flash the kitkat 4.4.2 with a pitfile on it?and untick Repartion.. Flash only the FNB8.Home.tar mate . I encounter this issue once and the fix was changing the Port
Click to expand...
Click to collapse
Just had the same "no pit partition" error
Are entering recovery from total shutdown and pressing buttons or using the restart to download mode?
I had similar problem and turns out odin flashing don't work when you use restart to download mode.
New Folder said:
Are entering recovery from total shutdown and pressing buttons or using the restart to download mode?
I had similar problem and turns out odin flashing don't work when you use restart to download mode.
Click to expand...
Click to collapse
I don't have an option to restart to download mode. I'm using stock firmware.
I can confirm today that it was indeed my USB cable. I have borrowed my friends cable and it works just fine.
Cheers for all the help guys
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
rajukhadka19782 said:
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
Click to expand...
Click to collapse
You must use ODIN
go to download mode then flash your rom
rajukhadka19782 said:
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
Click to expand...
Click to collapse
i have same problem after i install app from google play try to flash rom can,t find 1 that work
plz help.
you need to use odin to flash the stock firmware back going into download mode and for rom just visit - http://www.sammobile.com/ and download firmware from there just see you model and select you country and download latest stock rom and flash it or else tell me your model number and country i will provide you link
AmGaD-SaLaH said:
You must use ODIN
go to download mode then flash your rom
Click to expand...
Click to collapse
Thanks dude for the suggestion.
me 2
Me 2, I want to unbrick it how to download my firmware?
Galaxy Grand Prime SM-G530/H/DV is Not accepting ODIN connection
Galaxy Grand Prime SM-G530/H/DV
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
maq66 said:
Galaxy Grand Prime SM-G530/H/DV
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
Click to expand...
Click to collapse
Seems like the EFS partition is broken (IMEI Invalid)
If You don't have any backups done by custom recovery, well... You're probably done.
I am having a similar problem. After enabling KNOX, which I thought was just another antivirus, my phone rebooted, and just got stuck. It would go to the boot page, with the name, and then it would act like it was gonna go to my home screen, but the screen would go black and it would start over. I cleared the cache and factory wiped it, but still no luck. I didn't enable usb debugging, and from what I know there is no way to enable it. I need it to use odin to flash a rom and start over. any suggestions?
dineshjumani said:
you need to use odin to flash the stock firmware back going into download mode and for rom just visit - http://www.sammobile.com/ and download firmware from there just see you model and select you country and download latest stock rom and flash it or else tell me your model number and country i will provide you link
Click to expand...
Click to collapse
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
talvigi said:
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
Click to expand...
Click to collapse
I'm with the same problem! All solutions need to go to download or recovery mode, but I can't turn on my phone and Odin can't catch it! Please, could somebody help me?
Thanks!
lucas13garcia said:
I'm with the same problem! All solutions need to go to download or recovery mode, but I can't turn on my phone and Odin can't catch it! Please, could somebody help me?
Thanks!
Click to expand...
Click to collapse
Does your device start at all or not? if it starts tell me what do you see? Is the battery charged, anden have you tried Odin 1.87, and have you tired to flash repair firmware 4.4.4, please Try it and make sure to only flash BL file first.
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
Does your device start at all or not? if it starts tell me what do you see? Is the battery charged, anden have you tried Odin 1.87, and have you tired to flash repair firmware 4.4.4, please Try it and make sure to only flash BL file first.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Hey, thank you for the help!
It starts and it doesn't! With the battery, after I try to turn on, it keeps blinking repeatedly and stops only if I remove the battery. And my issue with any fix that I try to flash is that the computer doesn't recognize, probably cuz the blinking blue light is just a random light and not the phone actually trying to turn on... so Odin, for example, doesn't catch any device!
Is there any way to make the computer recognize it? I already tried some usb drivers, but nothing so far... BTW, I have a windows 10.
Thanks!
lucas13garcia said:
Hey, thank you for the help!
It starts and it doesn't! With the battery, after I try to turn on, it keeps blinking repeatedly and stops only if I remove the battery. And my issue with any fix that I try to flash is that the computer doesn't recognize, probably cuz the blinking blue light is just a random light and not the phone actually trying to turn on... so Odin, for example, doesn't catch any device!
Is there any way to make the computer recognize it? I already tried some usb drivers, but nothing so far... BTW, I have a windows 10.
Thanks!
Click to expand...
Click to collapse
Well Windows 10 64bit has been creating problems for many many people in the forum and I have seen people running vm and win 7 for the best results. And something very important I must say is that, most of the new computers do have USB 2.0 ports but they are limited in number, so you should find one on ur PC, to us it specifically for phone tweaking softwares. I would suggest you find another PC or laptop around,
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
Click to expand...
Click to collapse
Without recovery or Download mode, you'll need to take it to someone with a black box or jtag.
If you can access a working phone of your same model, you can boot download mode from sd
http://forum.xda-developers.com/grand-prime/development/fix-g530-debrick-img-guide-to-make-t3422115
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
mrunank said:
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
Click to expand...
Click to collapse
What happens when you go to download mode?
---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------
mrunank said:
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
Click to expand...
Click to collapse
Did you try wiping cache and what is your model?
waleeds1 said:
What happens when you go to download mode?
---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------
Did you try wiping cache and what is your model?
Click to expand...
Click to collapse
My model is SM530H I cannot enter the recovery mode to wipe the cache . When I try to go into the recovery mode, samsung logo flashes and then the screen goes blank. Same thing happens when i try to normally switch on the phone
mrunank said:
My model is SM530H I cannot enter the recovery mode to wipe the cache . When I try to go into the recovery mode, samsung logo flashes and then the screen goes blank. Same thing happens when i try to normally switch on the phone
Click to expand...
Click to collapse
What about download mode? Btw it should not go to logo it should go to recovery after bootimage. You should hold down power home and volume down untill download mode comes or power home and volume up untill recovery menu comes
hello people , I have a neo s3 and he stopped on the logo of Samsung ( why I was in a rom custom and clicked to format , so I also had a custon recovery then he stopped ) and is only trying to enter the recovery mode and still not working
already tried everything Odin and etc ..
he does not recognize in any PC with no driver
and also he just turn on with a charger conected
Can someone help me please!!!
PS: sorry for my bad english
how about download mode?
DerPuGNa said:
how about download mode?
Click to expand...
Click to collapse
yeah i can boot on download mode but he dosent recognize in any pc...
i think it is because the usb port is a little damaged so i replace it soon , but i cant do it at now , that is why i asking here...
JUST AL said:
yeah i can boot on download mode but he dosent recognize in any pc...
i think it is because the usb port is a little damaged so i replace it soon , but i cant do it at now , that is why i asking here...
Click to expand...
Click to collapse
Try connecting your phone when its in download and try with Odin, if it recognize your device than just flash stock rom.
JUST AL said:
yeah i can boot on download mode but he dosent recognize in any pc...
i think it is because the usb port is a little damaged so i replace it soon , but i cant do it at now , that is why i asking here...
Click to expand...
Click to collapse
Try a different version of Odin first. For me only 3.09 and upwards works.
Install Samsung kies 3 to make the phone recognizable by pc and try flashing stock firmware with odin 3.09
First of all, you should download the drivers and stock rom from Sammobile.
Found the drivers here: http://www.mediafire.com/download/k93a92c9rpyg4r5/Samsung-Usb-Driver-v1.5.55.0.exe
(not sure if they work, go and ahead install them and boot to download mode, then see, if odin recognizes it)
Latest Odin download: http://odindownload.com/
If the drivers work and your device is connected to the computer(also boot into download mode) and odin recognizes it:
1) Choose bootloader, then search for your downloaded firmware.
2) Head to the options tab and tick "Nand Erase All", "Phone EFS Clear" and "Phone Bootloader Update".
3) Then hit start and wait it to finish.
It should delete everything on your phone, restore it like it came out of the box.
If the drivers don't work let me know, I'll search for other working ones.
Ok so i am trying to mainline my tab 2 but in that process i didnt have a dts so i tried to make my own and got to the point where a simplefb screen would come and go! Now the problem arises is that i cannot open anythin, only sometimes it boots up to shows the simplefb screen when charging but other than that i cannot go to twrp nor to download mode
i think it might be bricked
Help me fix it
@Android-Andi I dont wanna disturb you as i know you have moved on from the tab but you seem to be the guy who knows how to fix my tab
Please check the post above and guide me to recover the tab
Sorry, no idea. You can try to get access via Odin or Heimdall to flash a stockrom. Haven't touched Android devices for a while now.
Android-Andi said:
Sorry, no idea. You can try to get access via Odin or Heimdall to flash a stockrom. Haven't touched Android devices for a while now.
Click to expand...
Click to collapse
Well the issue is 1) I can't boot into download mode
2) Usb cable is charging only it can't transfer data
Android-Andi said:
Sorry, no idea. You can try to get access via Odin or Heimdall to flash a stockrom. Haven't touched Android devices for a while now.
Click to expand...
Click to collapse
Hey got a cable but can't get into Download mode any help is appreciated
Thanks