Database Users

Stuck at Android Animation -.-

Greetings all !
Since i am new here, i have a great problem.
So, my phone stopped working few days ago, i needed to log in to my account or something, didnt knew i can fix that with "hard reset" so i googled about 3 hours till i found this forum, great work me !
So i looked a lil bit whats going on here, was searching and searching till i found out how to flash a phone, so i did, and had no success, almost bricked my phone :silly:
So i keepd searching this forum till i found this "
http://forum.xda-developers.com/showthread.php?t=927379
Click to expand...
Click to collapse
" in a AiO setup here
http://androidforums.com/optimus-gt...ad-swiftdroid-cm-7-1-lg-gt540-new-method.html
Click to expand...
Click to collapse
so i downloaded that "setup" file, installed it, worked great, i was amazed to be honest, but to be honest, this is the worst mod ever made for android. cynamogen mod cyna my ass -.-
So here is the problem, i didnt like that 2.3.7 update at all, and that addon cyna thing, so i waned to roll it back, connected my phone to PC, removed SIM, Mem card, found a workin ROM i installed before (before i found cyna and android 2.3.7), used KDZ, selected all the options required, and started an update using KDZ, after it finished my phone restarts it by it self, and god stuck on "ANDROID" animation, i thought its bootin' so i let it about 20-30 min to do so, nothing happens :/
UPDATE:
Now my phone is stuck on the LG LOGO, i cant do any thing, all i can do is go in DL MODE but its useless, my pc wont recognize it, so does KDZ, nothin is recognizing my phone, any solutions ?
So my question here is:
- How do i install 1.6 or 2.1 OFFICIAL version (can be CUSTOM ROM) i dont care, i just want my phone to work again
- What is needed (apps, kdz files, etc)
- Is this so bad, did i bricked my phone or ?
btw. Here are some infos 'bout meh:
- Location: Bosnia and Herzegovina
- City: Sarajevo
- Provider: BH TELECOM
- Phone: LG GT540 Optimus
if u need more info just ask !

I DO NOT recommend to use kdz.
if you don't like cyanogenmod, you can try
1. aosp 2.3.7
2. some modded 2.1 ROM
3. stock 2.1 from LG
they can be flashed via recovery (clockworkmod)
as you now already used kdz again i'd recommend to try the following: turn off your device and try to reboot into recovery:
press and hold HOME and then press POWER.
hold HOME till CWM boots up.
if this doesn' work you may try fastboot:
press and hold CAMERA, press power and hold CAMERA till you see a black screen, PC should recognize a new device (fastboot interface)
if this doesn't work too try too boot and hold these buttons:
http://downloads.k0k0.de/MobilePhones/Devices/LG/GT540/GT540_Klammeraffe.png

update: the android logo disapeared, i accidently unpluged my device, and now my pc cant recognize it omg omg
also button tricks aint working ... :/
go to yt and paste this towards it
watch?v=GmXaRN2MQ-E
Click to expand...
Click to collapse

duku5k said:
update: the android logo disapeared, i accidently unpluged my device, and now my pc cant recognize it omg omg
also button tricks aint working ... :/
go to yt and paste this towards it
Click to expand...
Click to collapse
download mode?
power and VOL- button

andreas__ said:
download mode?
power and VOL- button
Click to expand...
Click to collapse
this one works fine
whats next, what should i do ?

In download mode connect phone to pc and use kdz flasher to flash fastboot enabled rom. Try different modes in kdz flasher (eg. cs_emurdiance).
Sent from my LG-GT540 using xda app-developers app

[Q] LG Optimus L3 - LG Logo Loop

Salut à tous,
Yesterday, i got a problem with my LG. I wanted to change the Rom and after i finished the procedure, i got and LG Logo Loop
Here a little video a made of the Loop : http://www.youtube.com/watch?v=1ZDgzhDNBb0&feature=youtu.be
Normaly, i can change the Rom again by Hard Reseting, but when i press the 3 buttons, nothing happens.
When i connect the phone to the PC, i don't even got the sound that Win8 does when a phone is pluged in, that means that the phone isn't recongnized by the PC, and i allready installed all the Drivers.
I can't enter Emergency mode, when i press the buttons, nothing happens too.
My phone wasn't rooted so i don't have CWM.
I tried LG Support Tool, KDZ Software update, but as i said, the phone isn't recongnized, so i can't do anything.
Some people on forums adviced Medusa Box, but when i launch the app, i got as a message : Card init failed ..
So this is it.
I hope someone can help me. The phone isn't mine, so i'm little afraid of this loop .. Some people on forums said that this is a Hard Break, others said that this is Soft break, other also said that this is a Dalvik Cache Loop ..
Anyway,
Thanx in advance

Makozak said:
Salut à tous,
Yesterday, i got a problem with my LG. I wanted to change the Rom and after i finished the procedure, i got and LG Logo Loop
Here a little video a made of the Loop : http://www.youtube.com/watch?v=1ZDgzhDNBb0&feature=youtu.be
Normaly, i can change the Rom again by Hard Reseting, but when i press the 3 buttons, nothing happens.
When i connect the phone to the PC, i don't even got the sound that Win8 does when a phone is pluged in, that means that the phone isn't recongnized by the PC, and i allready installed all the Drivers.
I can't enter Emergency mode, when i press the buttons, nothing happens too.
My phone wasn't rooted so i don't have CWM.
I tried LG Support Tool, KDZ Software update, but as i said, the phone isn't recongnized, so i can't do anything.
Some people on forums adviced Medusa Box, but when i launch the app, i got as a message : Card init failed ..
So this is it.
I hope someone can help me. The phone isn't mine, so i'm little afraid of this loop .. Some people on forums said that this is a Hard Break, others said that this is Soft break, other also said that this is a Dalvik Cache Loop ..
Anyway,
Thanx in advance
Click to expand...
Click to collapse
mAke sure you have install all LG Software on your computer, like usb driver the important one
then download stock rom for your device
and flash it through KDZ Software update,

Try instaling drivers on some win7 pc/laptop, then try to revive the phone via kdz, because win8 sometimes has problems with drivers etc,
Btw which procedure were you using to change the rom?

Makozak said:
Salut à tous,
Yesterday, i got a problem with my LG. I wanted to change the Rom and after i finished the procedure, i got and LG Logo Loop
Here a little video a made of the Loop : http://www.youtube.com/watch?v=1ZDgzhDNBb0&feature=youtu.be
Normaly, i can change the Rom again by Hard Reseting, but when i press the 3 buttons, nothing happens.
When i connect the phone to the PC, i don't even got the sound that Win8 does when a phone is pluged in, that means that the phone isn't recongnized by the PC, and i allready installed all the Drivers.
I can't enter Emergency mode, when i press the buttons, nothing happens too.
My phone wasn't rooted so i don't have CWM.
I tried LG Support Tool, KDZ Software update, but as i said, the phone isn't recongnized, so i can't do anything.
Some people on forums adviced Medusa Box, but when i launch the app, i got as a message : Card init failed ..
So this is it.
I hope someone can help me. The phone isn't mine, so i'm little afraid of this loop .. Some people on forums said that this is a Hard Break, others said that this is Soft break, other also said that this is a Dalvik Cache Loop ..
Anyway,
Thanx in advance
Click to expand...
Click to collapse
Try to remove battery and connect the phone to the pc, hold volume + and - (between + and -, the middle) and the power button, this will works to get emergency mode, got same problem when tried to flash, still have the problem as you, logo loop with this stupid sound

Thank you everybody for your awnsers !
mugen_dz said:
Try to remove battery and connect the phone to the pc, hold volume + and - (between + and -, the middle) and the power button, this will works to get emergency mode, got same problem when tried to flash, still have the problem as you, logo loop with this stupid sound
Click to expand...
Click to collapse
Yes, it work, i'm finaly in the Emergency Mode ! My mistake was to press Power and Volume - or +, not the middle ..
Now that i'm in the Emergency mode and i don't want to get in any trouble again, which rom do you advise me to instal ? and with what method ?
Thanx again

Makozak said:
Thank you everybody for your awnsers !
Yes, it work, i'm finaly in the Emergency Mode ! My mistake was to press Power and Volume - or +, not the middle ..
Now that i'm in the Emergency mode and i don't want to get in any trouble again, which rom do you advise me to instal ? and with what method ?
Thanx again
Click to expand...
Click to collapse
Download the stock rom (original) for your phone, must know which version there is a lot of version ( V10C, V10G, V10E ...)
Use Kdz updater, if the App crash check compatibility and choose windows XP, in KDZ updater use the mode 3GQCT and phone mode DIAG, browse for the stock rom in the KDZ FILE and click Launch software update.
When i flashed the stock rom i got the loop, so i tried to hard reset it and it worked for me (power + menu + volume down or up i forgot)
Try to hard reset before flash if it doesn't work, flash it.

Okay Thanx again mate, i'll try it now and tell you

Worked ?
Sent from my HTC Desire S using xda app-developers app

Sorry mate, i was busy all the week, i only had free time today.
Anyway, yes it worked
Thanx a lot !!
You're a life saver

Excellent !
Sent from my HTC Desire S using xda app-developers app

Help i have bricked my phone and dont know what to do to fix it

HI . I am new to this .
I rooted my lg g2 and installed twrp on the phone and tried to install custom rom. this i where it went wrong.
i have lost twrp recovery not on phone any more .
phone when switched on goes to black screen with fastboot mod ready txt, i can access firmware update and do the lg firmware update with stock rom but drops off at 49% , i have changed port to no41 but still hangs and fails at 49%.
i don't know what to do to install all this to get it working again , please help me guy n girls .

Lord Kelly said:
HI . I am new to this .
I rooted my lg g2 and installed twrp on the phone and tried to install custom rom. this i where it went wrong.
i have lost twrp recovery not on phone any more .
phone when switched on goes to black screen with fastboot mod ready txt, i can access firmware update and do the lg firmware update with stock rom but drops off at 49% , i have changed port to no41 but still hangs and fails at 49%.
i don't know what to do to install all this to get it working again , please help me guy n girls .
Click to expand...
Click to collapse
I had the same problem...
1. So first you have to turn the phone completely off.
2. Then hold down the volume down+power until the LG logo is shown, let go and then immediately hold down same buttons.
3. This will bring you to a reset screen. Go through the reset process
4. This will bring you to the recovery
5. I installed a backup or try installing a rom you have on the phone
If any questions just ask. I know how stressful this could be

Ars3nal said:
I had the same problem...
1. So first you have to turn the phone completely off.
2. Then hold down the volume down+power until the LG logo is shown, let go and then immediately hold down same buttons.
3. This will bring you to a reset screen. Go through the reset process
4. This will bring you to the recovery
5. I installed a backup or try installing a rom you have on the phone
If any questions just ask. I know how stressful this could be
Click to expand...
Click to collapse
I have tried this and I get the factory hard reset white screen and I press power + power again and restarts but goes straight to black screen again with the following
[800] fastboot mode started
[850] udc_start ()
I am stuck with no ideas what to do.

Lord Kelly said:
I have tried this and I get the factory hard reset white screen and I press power + power again and restarts but goes straight to black screen again with the following
[800] fastboot mode started
[850] udc_start ()
I am stuck with no ideas what to do.
Click to expand...
Click to collapse
KDZ emergency mode?

francyesco said:
KDZ emergency mode?
Click to expand...
Click to collapse
what is KDZ EMERGANCY MODE?

When you are unbricking it through the method that didn't work for you there is a KDZ Emergency mode that you can check. When I had the same problem as you did I just did the method that I posted above. Not sure what will happen if you do use the KDZ method.

L7 HardBricked + bricked sd?

Hello there!
I have already used the search function, but I wasn't able to find my exact problem in any other post.
Yesterday I flashed the rom Carbon (4.4.2 maded by coderzs) on my p705, and today It appeared with the LG logo a little buggy, then I take out the battery and it never turns on again (no matter what key combination I used) and another surprise is that my 32gb micro sd was corrupted too, I can't even format it with HP disk storage format tool, neither I can use Recuva to get the files.
Plus, when I connect the phone to USB withouth battery it gets really hot.
Do anyone have an Idea of what to do? Actually I'm more concerned in recovering the SD card info or at least use it again in the future.
Thanks in advance.
New Info:
Now I can make it boot LG logo sometimes, but it still buggy and there is no key method to enter bootload emergency is working. =S

try this
nehuy said:
1 Actually I'm more concerned in recovering the SD card info or at least use it again in the future.
2 Now I can make it boot LG logo sometimes, but it still buggy and there is no key method to enter bootload emergency is working. =S
Click to expand...
Click to collapse
1 try putting it in a blackberry while its on (old bb are the best) and it will prompt its corrupted say yes to format and then try plugging into recuva (worked for me numerous times)
2 did you try vol+ and vol- and power hold and release power after vibration and then use KDZ_FW_UPD_EN.7z
try link2sd it does same but on a different level

IGGYVIP said:
1 try putting it in a blackberry while its on (old bb are the best) and it will prompt its corrupted say yes to format and then try plugging into recuva (worked for me numerous times)
2 did you try vol+ and vol- and power hold and release power after vibration and then use KDZ_FW_UPD_EN.7z
try link2sd it does same but on a different level
Click to expand...
Click to collapse
I will have to try to put the sd in another phone, but I don't know anyone with bb =S
Also, the only way to make the phone "boot" is holding vol+ (and any other key) and then it vibrates and sow a buggy LG logo, then it continously restart over and over again showing different buggy logos (LG ones).
THanks for the reply.

Other than trying kdz flash you can use LG official update tool to do an emergency update. You will in that process need to enter both imei&serial. Basically this also flash kdz but in addition it check and repair your partitions.
Hope it might help you :beer:

I will try that last advice, thanks
The SD card seems dead =S
It is recognized by the computer and devices, it shows 1gb instead of 32 and it needs to be formated, but no program let me do it.

I already have this problem with my girlfriend's phone last week-end and solve it!
I use a modified stock rom (root + cwm in KDZ) avaiable here http://forum.xda-developers.com/showthread.php?t=2214717. ROM KDZ V20A_00 ROOT
Put the phone in emergency mode (power off the phone, plug it on usb to your pc, wait for the battery logo then press vol+ and power)
Start KDZ updater then flash the rom. After install, start cwm (vol+ vol- power home at same time) and do a wipe data factory reset and wipe dalvik and cache.
Reboot and it work! :victory:

Yes, I already did it too in the past, I bricked my phone twice, but this time is a hard brick, and wont let me get to emergency mode (there is no way, really I test it). It seems that I can't make it boot =S
Maybe all this is because I was using ART instead of davlink, and something may explode inside the phone.
Thanks anyway for the reply, I'l keep searching for some solution (the SD have more chances to keep alive I guess)

hmmm
nehuy said:
Yes, I already did it too in the past, I bricked my phone twice, but this time is a hard brick, and wont let me get to emergency mode (there is no way, really I test it). It seems that I can't make it boot =S
Maybe all this is because I was using ART instead of davlink, and something may explode inside the phone.
Thanks anyway for the reply, I'l keep searching for some solution (the SD have more chances to keep alive I guess)
Click to expand...
Click to collapse
does your phone come-up with blank (black but backlit) screen ?
if it does then you will be able to use kdz updater in attachment LG-RDTT_1.0.5.4 (needs included windows enabler for this version)
use THIS GUIDE to flash just skip the hosts file editing steps
and let us know

Okey, I'll try it in a moment
well, it didn't work =S
Computer don't recognize the phone, I tried with ubuntu, 3 windows and 2 mac.

When you say buggy logo do you mean there is visual distortion to screen?
if so it most likely will be hw damage
you got ubuntu can you see it in adb ?
Push/pull ?

IGGYVIP said:
When you say buggy logo do you mean there is visual distortion to screen?
if so it most likely will be hw damage
you got ubuntu can you see it in adb ?
Push/pull ?
Click to expand...
Click to collapse
No, and I'm not able to mount it neither.
The logo is as you say, but it reboots constantly and make some little color bars blur the image, then restart again and make some other kind of buggy image :x all with LG logo.
--------------------------------------------------------------
Well, I finally choose to go for LG service, I'm going to call them tomorrow.
Thanks for the help and trying to solve my problem, I guess they will make my phone boot, but my SD will never come back, or that is what is seems =(
It keeps saying that it is read only, and that's why I can format it.

[Q] Hard bricked G2 after flash

Hi everyone
I may have bricked my G2. I use to have a Samsung Galaxy S which I flashed many times so I kinda know when I mess up with instructions. This time though, things look a bit more serious... Anyway, here is what happened:
I flashed the Cloudy G3 rom (1.0) for my G2 D802 32gb. Original rom was stock rooted 4.4.
I followed the instructions :
- Backup rom
- All wipes
- Flash kitkat baseband
- Flash rom zip
- Get through the aroma installer steps
But then, when it asked to reboot, the phone just shut down.
Now it won't turn on. All I have is a quick look at the LG boot logo, and then the screen goes all black (blacklit is still on) again.
All I managed to do so far is maintaining the LG boot logo a bit longer on screen by alternatively pressing volume + or - at random times.
I can't access recovery or download mode anymore.
Plugging the phone will only show the LG boot logo and do all the same.
The phone is no longer recognized by my computer.
When I plug it, I get 13 new windows asking me to format the device and one I can explore.
Inside, there is one folder named "Image", filled with 51,4 Mb of files...
Quite confusing.
I don't know what to do, so any help to get the phone back to work will be appreciated
Thank you in advance.

Eijo said:
Hi everyone
I may have bricked my G2. I use to have a Samsung Galaxy S which I flashed many times so I kinda know when I mess up with instructions. This time though, things look a bit more serious... Anyway, here is what happened:
I flashed the Cloudy G3 rom (1.0) for my G2 D802 32gb. Original rom was stock rooted 4.4.
I followed the instructions :
- Backup rom
- All wipes
- Flash kitkat baseband
- Flash rom zip
- Get through the aroma installer steps
But then, when it asked to reboot, the phone just shut down.
Now it won't turn on. All I have is a quick look at the LG boot logo, and then the screen goes all black (blacklit is still on) again.
All I managed to do so far is maintaining the LG boot logo a bit longer on screen by alternatively pressing volume + or - at random times.
I can't access recovery or download mode anymore.
Plugging the phone will only show the LG boot logo and do all the same.
The phone is no longer recognized by my computer.
When I plug it, I get 13 new windows asking me to format the device and one I can explore.
Inside, there is one folder named "Image", filled with 51,4 Mb of files...
Quite confusing.
I don't know what to do, so any help to get the phone back to work will be appreciated
Thank you in advance.
Click to expand...
Click to collapse
same here after flashing the wrong kernel, and tried with the good one using fastboot....
please help!

darkflyer1983 said:
same here after flashing the wrong kernel, and tried with the good one using fastboot....
please help!
Click to expand...
Click to collapse
At least I'm not alone :laugh:
I found this thread but haven't tried yet. Don't know if the problem is similar.
I really hope the phone isn't dead, it's almost brand new

This is exactly what I have . The main problem is we can not see phone partitions. Always the alarm "can not access " or "format" !Waiting for some body to help restaure our LG G2.

3205
Are you still under warranty. If you can't get into download mode that means that LG won't be able to either. You could process a return directly from LG.

Problem solved ...
Somehow I did manage to hard reset (vol - & power, wait for LG logo, release and then press vol - & power again) and then access recovery mode, so I did restore my backup (which had been renamed to ... 1970-05-01 ! lol) and my G2 is now back to life.
Weirdest thing ever... Kinda worried about flashing it again now !
Thing to remember : always have a backup file.

You are lucky man! I've done it but nothing after. I can access to hard reset but when I push power button the screen goes black as before ....

Is it actually in "Download Mode"?
GeneralMills777 said:
Are you still under warranty. If you can't get into download mode that means that LG won't be able to either. You could process a return directly from LG.
Click to expand...
Click to collapse
So, if my G2 shows "Download Mode" on the screen with the little white dots, but it's not recognized by Windows 7, Ubuntu, or Knoppix, and is for all intents and purposes, non-responsive, does anyone know if it's actually in "Download Mode"?

Eijo said:
Somehow I did manage to hard reset (vol - & power, wait for LG logo, release and then press vol - & power again) and then access recovery mode, so I did restore my backup (which had been renamed to ... 1970-05-01 ! lol) and my G2 is now back to life.
Weirdest thing ever... Kinda worried about flashing it again now !
Thing to remember : always have a backup file.
Click to expand...
Click to collapse
Peperepe said:
You are lucky man! I've done it but nothing after. I can access to hard reset but when I push power button the screen goes black as before ....
Click to expand...
Click to collapse
In my case, it just stuck on the same screen. Nothing moves.

honest1212 said:
In my case, it just stuck on the same screen. Nothing moves.
Click to expand...
Click to collapse
same problem here:
+ Download mode with some blue dot and nothing move, PC has no usb connection detected
+ Stuck on the LG logo screen with normal boot
+ NO recovery
+ it does FACTORY RESET but keep processing and nothing happen

Helped me, too.

Eijo said:
Hi everyone
I may have bricked my G2. I use to have a Samsung Galaxy S which I flashed many times so I kinda know when I mess up with instructions. This time though, things look a bit more serious... Anyway, here is what happened:
I flashed the Cloudy G3 rom (1.0) for my G2 D802 32gb. Original rom was stock rooted 4.4.
I followed the instructions :
- Backup rom
- All wipes
- Flash kitkat baseband
- Flash rom zip
- Get through the aroma installer steps
But then, when it asked to reboot, the phone just shut down.
Now it won't turn on. All I have is a quick look at the LG boot logo, and then the screen goes all black (blacklit is still on) again.
All I managed to do so far is maintaining the LG boot logo a bit longer on screen by alternatively pressing volume + or - at random times.
I can't access recovery or download mode anymore.
Plugging the phone will only show the LG boot logo and do all the same.
The phone is no longer recognized by my computer.
When I plug it, I get 13 new windows asking me to format the device and one I can explore.
Inside, there is one folder named "Image", filled with 51,4 Mb of files...
Quite confusing.
I don't know what to do, so any help to get the phone back to work will be appreciated
Thank you in advance.
Click to expand...
Click to collapse
hi dude , i had the same issue , and i lost my g2 cause of it , please dont mess with the partitions , to all of you please dont delete the partitions , just turn off your phone , press volume up and push usb cable you ll get into download mode , from there yo can go back to stock by the .tot flashing method or kdz but dont mess with partitions , i deleted partitions and my phone wad totally dead , no one could repair it

Something happened to me today...
Sent from my LG-D802 using XDA Free mobile app