Stuck at Android Animation -.- - GT540 Optimus General

Greetings all !
Since i am new here, i have a great problem.
So, my phone stopped working few days ago, i needed to log in to my account or something, didnt knew i can fix that with "hard reset" so i googled about 3 hours till i found this forum, great work me !
So i looked a lil bit whats going on here, was searching and searching till i found out how to flash a phone, so i did, and had no success, almost bricked my phone :silly:
So i keepd searching this forum till i found this "
http://forum.xda-developers.com/showthread.php?t=927379
Click to expand...
Click to collapse
" in a AiO setup here
http://androidforums.com/optimus-gt...ad-swiftdroid-cm-7-1-lg-gt540-new-method.html
Click to expand...
Click to collapse
so i downloaded that "setup" file, installed it, worked great, i was amazed to be honest, but to be honest, this is the worst mod ever made for android. cynamogen mod cyna my ass -.-
So here is the problem, i didnt like that 2.3.7 update at all, and that addon cyna thing, so i waned to roll it back, connected my phone to PC, removed SIM, Mem card, found a workin ROM i installed before (before i found cyna and android 2.3.7), used KDZ, selected all the options required, and started an update using KDZ, after it finished my phone restarts it by it self, and god stuck on "ANDROID" animation, i thought its bootin' so i let it about 20-30 min to do so, nothing happens :/
UPDATE:
Now my phone is stuck on the LG LOGO, i cant do any thing, all i can do is go in DL MODE but its useless, my pc wont recognize it, so does KDZ, nothin is recognizing my phone, any solutions ?
So my question here is:
- How do i install 1.6 or 2.1 OFFICIAL version (can be CUSTOM ROM) i dont care, i just want my phone to work again
- What is needed (apps, kdz files, etc)
- Is this so bad, did i bricked my phone or ?
btw. Here are some infos 'bout meh:
- Location: Bosnia and Herzegovina
- City: Sarajevo
- Provider: BH TELECOM
- Phone: LG GT540 Optimus
if u need more info just ask !

I DO NOT recommend to use kdz.
if you don't like cyanogenmod, you can try
1. aosp 2.3.7
2. some modded 2.1 ROM
3. stock 2.1 from LG
they can be flashed via recovery (clockworkmod)
as you now already used kdz again i'd recommend to try the following: turn off your device and try to reboot into recovery:
press and hold HOME and then press POWER.
hold HOME till CWM boots up.
if this doesn' work you may try fastboot:
press and hold CAMERA, press power and hold CAMERA till you see a black screen, PC should recognize a new device (fastboot interface)
if this doesn't work too try too boot and hold these buttons:
http://downloads.k0k0.de/MobilePhones/Devices/LG/GT540/GT540_Klammeraffe.png

update: the android logo disapeared, i accidently unpluged my device, and now my pc cant recognize it omg omg
also button tricks aint working ... :/
go to yt and paste this towards it
watch?v=GmXaRN2MQ-E
Click to expand...
Click to collapse

duku5k said:
update: the android logo disapeared, i accidently unpluged my device, and now my pc cant recognize it omg omg
also button tricks aint working ... :/
go to yt and paste this towards it
Click to expand...
Click to collapse
download mode?
power and VOL- button

andreas__ said:
download mode?
power and VOL- button
Click to expand...
Click to collapse
this one works fine
whats next, what should i do ?

In download mode connect phone to pc and use kdz flasher to flash fastboot enabled rom. Try different modes in kdz flasher (eg. cs_emurdiance).
Sent from my LG-GT540 using xda app-developers app

Related

[Q] LG Optimus L5 Not booting

I have a problem with my like a mouth old LG Optimus L5 (LGE610).
The problem is that it keeps stuck on the boot screen and keeps doing the animation over and over.
I waited like 3 hours and still the same
I've heard there was a update today but i did not get it is that maybe why or is it something else?
Sorry for my bad english
You got a bootloop, so you will need to enter in download mode and flash the software again.
Donwload mode: hold volum + and - and after connect the usb to phone [ which is already connected to the pc].
Sabyn said:
You got a bootloop, so you will need to enter in download mode and flash the software again.
Donwload mode: hold volum + and - and after connect the usb to phone [ which is already connected to the pc].
Click to expand...
Click to collapse
It did not work i think its my device is broken although it does not matter i got everthing backed-up and a got like 2 years warranty on it
just to be sure, try another slot on your pc with usb, if the downlaod mode still not work, you might have a problem
Is the CWM working ? If yes follow the steps (I unbricked / unbootlooped my phone)
1) Pull out your phone battery
2) Press Vol+/Vol-/Home button and connect your phone to USB cable to PC
3) After 5-10 times my phone booted on CWM recovery
4) In there Wipe Data/Cache/Dalvik Cache (For 100% luck)
5. Restore your phone settings via backup you have done earlier (Nanodroid backup)
I think it will work. Chears :good:
harkis123 said:
Is the CWM working ? If yes follow the steps (I unbricked / unbootlooped my phone)
1) Pull out your phone battery
2) Press Vol+/Vol-/Home button and connect your phone to USB cable to PC
3) After 5-10 times my phone booted on CWM recovery
4) In there Wipe Data/Cache/Dalvik Cache (For 100% luck)
5. Restore your phone settings via backup you have done earlier (Nanodroid backup)
I think it will work. Chears :good:
Click to expand...
Click to collapse
It does not seem to work i dont thinks its the software but the hardware
My lge612 is power on lglogo only
Dear team, my lge612 power on lg logo on display. please provide the kdz software for lge612
.please help us . please sent the link as my email id
thanking you
pcpietjeisl said:
I have a problem with my like a mouth old LG Optimus L5 (LGE610).
The problem is that it keeps stuck on the boot screen and keeps doing the animation over and over.
I waited like 3 hours and still the same
I've heard there was a update today but i did not get it is that maybe why or is it something else?
Sorry for my bad english
Click to expand...
Click to collapse
What did you do before it happened?
pcpietjeisl said:
I have a problem with my like a mouth old LG Optimus L5 (LGE610).
The problem is that it keeps stuck on the boot screen and keeps doing the animation over and over.
I waited like 3 hours and still the same
I've heard there was a update today but i did not get it is that maybe why or is it something else?
Sorry for my bad english
Click to expand...
Click to collapse
1. Put out the battery, then put on it
2. Press volumn (-) + Home button then power on
If it success, there will be an ISC logo and your phone will be reboot
Sorry for my bad English
Thanks guys!
Thank you all for the ideas and tips
I brought it back to the shop where i bought it
and i got a new one it turned out it was broken
Thanks
Sorry for my bad English

[Q] LG Optimus L3 E405 Recovery Dead?

Hello,
This morning I tried to root my phone so that I can force everything to be moved to a sd card since the storage of the system is low not enough to install apps and to install A mod that is more updated then the current GingerBread OS.
I managed to soft brick the device the rom clearly said e405 obviously the developer has a few bugs anyway I manage to recover from my soft brick by A software 'KDZ' Only issue I have now is when I press volume up on boot I get A notice icon trying to say something (image of the icon is attached below) and when I use ROM Manager to reboot to recovery it will attempt to go there, Instead of going to recovery it goes to A loading page then this erases all my data/apps except SuperUser/Root.
Tried everything and it still does it?
When I use the LG Emergency Software it just goes to a page saying not responding??
Any help and ideas would be grateful so I can fix this issue and move on also im mostly A samsung user and im fairly new to lg.
See thee error message below
Once i get the idea of what the icon is actually trying to say I should be in the right direction.
Thanks,
Spudster
umm
Anyone??
Spudster1 said:
Anyone??
Click to expand...
Click to collapse
Perhaps you can go to ROM Manager, uninstall Recovery, then re-install it?
I don't really know. I'm sorta new to this stuff.
hard reset
Spudster1 said:
Hello,
This morning I tried to root my phone so that I can force everything to be moved to a sd card since the storage of the system is low not enough to install apps and to install A mod that is more updated then the current GingerBread OS.
I managed to soft brick the device the rom clearly said e405 obviously the developer has a few bugs anyway I manage to recover from my soft brick by A software 'KDZ' Only issue I have now is when I press volume up on boot I get A notice icon trying to say something (image of the icon is attached below) and when I use ROM Manager to reboot to recovery it will attempt to go there, Instead of going to recovery it goes to A loading page then this erases all my data/apps except SuperUser/Root.
Tried everything and it still does it?
When I use the LG Emergency Software it just goes to a page saying not responding??
Any help and ideas would be grateful so I can fix this issue and move on also im mostly A samsung user and im fairly new to lg.
See thee error message below
Once i get the idea of what the icon is actually trying to say I should be in the right direction.
Thanks,
Spudster
Click to expand...
Click to collapse
I saw that icon after flashing back to stock rom with KDZ and a hard reset worked for me. Pull the battery, make sure you not connected to USB or charger, then press and hold home key and down volume while you press power on. Release power when you see LG logo, hold the down and home for a while until you see android unpacking a box. It takes about a minute to see this, so you gotta wait for it. The phone reboots or shut downs, don't rememberwhich
reply
kurtstraker said:
I saw that icon after flashing back to stock rom with KDZ and a hard reset worked for me. Pull the battery, make sure you not connected to USB or charger, then press and hold home key and down volume while you press power on. Release power when you see LG logo, hold the down and home for a while until you see android unpacking a box. It takes about a minute to see this, so you gotta wait for it. The phone reboots or shut downs, don't rememberwhich
Click to expand...
Click to collapse
Ok I will try that and let you know if it works in a few hours I gave the phone to my brother for free since I bought A samsung (used to samsungs and love then
Anyway should also mention that when I try to reboot into recovery with rom manager it reboots goes to the loading box thing then it wipes my data Like i said I tried that method in a few hours and get back to you here.
nope
didn't work ;.(
Man go to the screen u have posted the images above , then use KDZ to flash back Man!
This is "DIAG MODE" so select it in KDZ program
So select KDZ file ( download if u have tried urs so far)
No error .. when u click to start upgrade ur phone will apper in emergency mode. Then the KDZ will flash flawslessly
Sent From ... Lg e400 <-- {[Brasilian Here]}
Still didnt work it flash though but still didnt fix the recovery..
These lg are actually useless a simple firmware flash should do the job.
LG staff are also rude to be honest rang up and because I tried to root and I was doing the right thing going back to stock they denied support and hang up without me giving A reply. Glad ive switched back to samsung s4 and Apple IPhone 5C.
Thanks for attempting to help :.)

[Q] LG Optimus L3 - LG Logo Loop

Salut à tous,
Yesterday, i got a problem with my LG. I wanted to change the Rom and after i finished the procedure, i got and LG Logo Loop
Here a little video a made of the Loop : http://www.youtube.com/watch?v=1ZDgzhDNBb0&feature=youtu.be
Normaly, i can change the Rom again by Hard Reseting, but when i press the 3 buttons, nothing happens.
When i connect the phone to the PC, i don't even got the sound that Win8 does when a phone is pluged in, that means that the phone isn't recongnized by the PC, and i allready installed all the Drivers.
I can't enter Emergency mode, when i press the buttons, nothing happens too.
My phone wasn't rooted so i don't have CWM.
I tried LG Support Tool, KDZ Software update, but as i said, the phone isn't recongnized, so i can't do anything.
Some people on forums adviced Medusa Box, but when i launch the app, i got as a message : Card init failed ..
So this is it.
I hope someone can help me. The phone isn't mine, so i'm little afraid of this loop .. Some people on forums said that this is a Hard Break, others said that this is Soft break, other also said that this is a Dalvik Cache Loop ..
Anyway,
Thanx in advance
Makozak said:
Salut à tous,
Yesterday, i got a problem with my LG. I wanted to change the Rom and after i finished the procedure, i got and LG Logo Loop
Here a little video a made of the Loop : http://www.youtube.com/watch?v=1ZDgzhDNBb0&feature=youtu.be
Normaly, i can change the Rom again by Hard Reseting, but when i press the 3 buttons, nothing happens.
When i connect the phone to the PC, i don't even got the sound that Win8 does when a phone is pluged in, that means that the phone isn't recongnized by the PC, and i allready installed all the Drivers.
I can't enter Emergency mode, when i press the buttons, nothing happens too.
My phone wasn't rooted so i don't have CWM.
I tried LG Support Tool, KDZ Software update, but as i said, the phone isn't recongnized, so i can't do anything.
Some people on forums adviced Medusa Box, but when i launch the app, i got as a message : Card init failed ..
So this is it.
I hope someone can help me. The phone isn't mine, so i'm little afraid of this loop .. Some people on forums said that this is a Hard Break, others said that this is Soft break, other also said that this is a Dalvik Cache Loop ..
Anyway,
Thanx in advance
Click to expand...
Click to collapse
mAke sure you have install all LG Software on your computer, like usb driver the important one
then download stock rom for your device
and flash it through KDZ Software update,
Try instaling drivers on some win7 pc/laptop, then try to revive the phone via kdz, because win8 sometimes has problems with drivers etc,
Btw which procedure were you using to change the rom?
Makozak said:
Salut à tous,
Yesterday, i got a problem with my LG. I wanted to change the Rom and after i finished the procedure, i got and LG Logo Loop
Here a little video a made of the Loop : http://www.youtube.com/watch?v=1ZDgzhDNBb0&feature=youtu.be
Normaly, i can change the Rom again by Hard Reseting, but when i press the 3 buttons, nothing happens.
When i connect the phone to the PC, i don't even got the sound that Win8 does when a phone is pluged in, that means that the phone isn't recongnized by the PC, and i allready installed all the Drivers.
I can't enter Emergency mode, when i press the buttons, nothing happens too.
My phone wasn't rooted so i don't have CWM.
I tried LG Support Tool, KDZ Software update, but as i said, the phone isn't recongnized, so i can't do anything.
Some people on forums adviced Medusa Box, but when i launch the app, i got as a message : Card init failed ..
So this is it.
I hope someone can help me. The phone isn't mine, so i'm little afraid of this loop .. Some people on forums said that this is a Hard Break, others said that this is Soft break, other also said that this is a Dalvik Cache Loop ..
Anyway,
Thanx in advance
Click to expand...
Click to collapse
Try to remove battery and connect the phone to the pc, hold volume + and - (between + and -, the middle) and the power button, this will works to get emergency mode, got same problem when tried to flash, still have the problem as you, logo loop with this stupid sound
Thank you everybody for your awnsers !
mugen_dz said:
Try to remove battery and connect the phone to the pc, hold volume + and - (between + and -, the middle) and the power button, this will works to get emergency mode, got same problem when tried to flash, still have the problem as you, logo loop with this stupid sound
Click to expand...
Click to collapse
Yes, it work, i'm finaly in the Emergency Mode ! My mistake was to press Power and Volume - or +, not the middle ..
Now that i'm in the Emergency mode and i don't want to get in any trouble again, which rom do you advise me to instal ? and with what method ?
Thanx again
Makozak said:
Thank you everybody for your awnsers !
Yes, it work, i'm finaly in the Emergency Mode ! My mistake was to press Power and Volume - or +, not the middle ..
Now that i'm in the Emergency mode and i don't want to get in any trouble again, which rom do you advise me to instal ? and with what method ?
Thanx again
Click to expand...
Click to collapse
Download the stock rom (original) for your phone, must know which version there is a lot of version ( V10C, V10G, V10E ...)
Use Kdz updater, if the App crash check compatibility and choose windows XP, in KDZ updater use the mode 3GQCT and phone mode DIAG, browse for the stock rom in the KDZ FILE and click Launch software update.
When i flashed the stock rom i got the loop, so i tried to hard reset it and it worked for me (power + menu + volume down or up i forgot)
Try to hard reset before flash if it doesn't work, flash it.
Okay Thanx again mate, i'll try it now and tell you
Worked ?
Sent from my HTC Desire S using xda app-developers app
Sorry mate, i was busy all the week, i only had free time today.
Anyway, yes it worked
Thanx a lot !!
You're a life saver
Excellent !
Sent from my HTC Desire S using xda app-developers app

[Q] Hard bricked G2 after flash

Hi everyone
I may have bricked my G2. I use to have a Samsung Galaxy S which I flashed many times so I kinda know when I mess up with instructions. This time though, things look a bit more serious... Anyway, here is what happened:
I flashed the Cloudy G3 rom (1.0) for my G2 D802 32gb. Original rom was stock rooted 4.4.
I followed the instructions :
- Backup rom
- All wipes
- Flash kitkat baseband
- Flash rom zip
- Get through the aroma installer steps
But then, when it asked to reboot, the phone just shut down.
Now it won't turn on. All I have is a quick look at the LG boot logo, and then the screen goes all black (blacklit is still on) again.
All I managed to do so far is maintaining the LG boot logo a bit longer on screen by alternatively pressing volume + or - at random times.
I can't access recovery or download mode anymore.
Plugging the phone will only show the LG boot logo and do all the same.
The phone is no longer recognized by my computer.
When I plug it, I get 13 new windows asking me to format the device and one I can explore.
Inside, there is one folder named "Image", filled with 51,4 Mb of files...
Quite confusing.
I don't know what to do, so any help to get the phone back to work will be appreciated
Thank you in advance.
Eijo said:
Hi everyone
I may have bricked my G2. I use to have a Samsung Galaxy S which I flashed many times so I kinda know when I mess up with instructions. This time though, things look a bit more serious... Anyway, here is what happened:
I flashed the Cloudy G3 rom (1.0) for my G2 D802 32gb. Original rom was stock rooted 4.4.
I followed the instructions :
- Backup rom
- All wipes
- Flash kitkat baseband
- Flash rom zip
- Get through the aroma installer steps
But then, when it asked to reboot, the phone just shut down.
Now it won't turn on. All I have is a quick look at the LG boot logo, and then the screen goes all black (blacklit is still on) again.
All I managed to do so far is maintaining the LG boot logo a bit longer on screen by alternatively pressing volume + or - at random times.
I can't access recovery or download mode anymore.
Plugging the phone will only show the LG boot logo and do all the same.
The phone is no longer recognized by my computer.
When I plug it, I get 13 new windows asking me to format the device and one I can explore.
Inside, there is one folder named "Image", filled with 51,4 Mb of files...
Quite confusing.
I don't know what to do, so any help to get the phone back to work will be appreciated
Thank you in advance.
Click to expand...
Click to collapse
same here after flashing the wrong kernel, and tried with the good one using fastboot....
please help!
darkflyer1983 said:
same here after flashing the wrong kernel, and tried with the good one using fastboot....
please help!
Click to expand...
Click to collapse
At least I'm not alone :laugh:
I found this thread but haven't tried yet. Don't know if the problem is similar.
I really hope the phone isn't dead, it's almost brand new
This is exactly what I have . The main problem is we can not see phone partitions. Always the alarm "can not access " or "format" !Waiting for some body to help restaure our LG G2.
3205
Are you still under warranty. If you can't get into download mode that means that LG won't be able to either. You could process a return directly from LG.
Problem solved ...
Somehow I did manage to hard reset (vol - & power, wait for LG logo, release and then press vol - & power again) and then access recovery mode, so I did restore my backup (which had been renamed to ... 1970-05-01 ! lol) and my G2 is now back to life.
Weirdest thing ever... Kinda worried about flashing it again now !
Thing to remember : always have a backup file.
You are lucky man! I've done it but nothing after. I can access to hard reset but when I push power button the screen goes black as before ....
Is it actually in "Download Mode"?
GeneralMills777 said:
Are you still under warranty. If you can't get into download mode that means that LG won't be able to either. You could process a return directly from LG.
Click to expand...
Click to collapse
So, if my G2 shows "Download Mode" on the screen with the little white dots, but it's not recognized by Windows 7, Ubuntu, or Knoppix, and is for all intents and purposes, non-responsive, does anyone know if it's actually in "Download Mode"?
Eijo said:
Somehow I did manage to hard reset (vol - & power, wait for LG logo, release and then press vol - & power again) and then access recovery mode, so I did restore my backup (which had been renamed to ... 1970-05-01 ! lol) and my G2 is now back to life.
Weirdest thing ever... Kinda worried about flashing it again now !
Thing to remember : always have a backup file.
Click to expand...
Click to collapse
Peperepe said:
You are lucky man! I've done it but nothing after. I can access to hard reset but when I push power button the screen goes black as before ....
Click to expand...
Click to collapse
In my case, it just stuck on the same screen. Nothing moves.
honest1212 said:
In my case, it just stuck on the same screen. Nothing moves.
Click to expand...
Click to collapse
same problem here:
+ Download mode with some blue dot and nothing move, PC has no usb connection detected
+ Stuck on the LG logo screen with normal boot
+ NO recovery
+ it does FACTORY RESET but keep processing and nothing happen
Helped me, too.
Eijo said:
Hi everyone
I may have bricked my G2. I use to have a Samsung Galaxy S which I flashed many times so I kinda know when I mess up with instructions. This time though, things look a bit more serious... Anyway, here is what happened:
I flashed the Cloudy G3 rom (1.0) for my G2 D802 32gb. Original rom was stock rooted 4.4.
I followed the instructions :
- Backup rom
- All wipes
- Flash kitkat baseband
- Flash rom zip
- Get through the aroma installer steps
But then, when it asked to reboot, the phone just shut down.
Now it won't turn on. All I have is a quick look at the LG boot logo, and then the screen goes all black (blacklit is still on) again.
All I managed to do so far is maintaining the LG boot logo a bit longer on screen by alternatively pressing volume + or - at random times.
I can't access recovery or download mode anymore.
Plugging the phone will only show the LG boot logo and do all the same.
The phone is no longer recognized by my computer.
When I plug it, I get 13 new windows asking me to format the device and one I can explore.
Inside, there is one folder named "Image", filled with 51,4 Mb of files...
Quite confusing.
I don't know what to do, so any help to get the phone back to work will be appreciated
Thank you in advance.
Click to expand...
Click to collapse
hi dude , i had the same issue , and i lost my g2 cause of it , please dont mess with the partitions , to all of you please dont delete the partitions , just turn off your phone , press volume up and push usb cable you ll get into download mode , from there yo can go back to stock by the .tot flashing method or kdz but dont mess with partitions , i deleted partitions and my phone wad totally dead , no one could repair it
Something happened to me today...
Sent from my LG-D802 using XDA Free mobile app

Samsung A20 semi-hard bricked

Please help ASAP. I tried to install lineage os with MindGapps. After I flashed lineageos with twrp, I rebooted it and now it doesnt turn on. I tried to go to download mode, but doesnt.
The phone doesnt turn on. When I press and hold power button + volume down button for 7 seconds, samsung+knox logo appears and then 'phone bootloader unlocked' warning appears for few seconds.
An hour ago, somehow I managed to open its download mode. To test how it got opened, I restarted my device, but unfortunately, I couldnt go back to download mode. Is there any way to solve this problem? I want to go back to download mode
Hold the volume + and - buttons down at the same time and then plug in the usb cable into the phone.
sammiev said:
Hold the volume + and - buttons down at the same time and then plug in the usb cable into the phone.
Click to expand...
Click to collapse
Thanks solved
sarthak.whenever said:
Please help ASAP. I tried to install lineage os with MindGapps. After I flashed lineageos with twrp, I rebooted it and now it doesnt turn on. I tried to go to download mode, but doesnt.
The phone doesnt turn on. When I press and hold power button + volume down button for 7 seconds, samsung+knox logo appears and then 'phone bootloader unlocked' warning appears for few seconds.
An hour ago, somehow I managed to open its download mode. To test how it got opened, I restarted my device, but unfortunately, I couldnt go back to download mode. Is there any way to solve this problem? I want to go back to download mode
Click to expand...
Click to collapse
I have a question. did you install the twrp to one ui 3.1 ? pls answer me bc I wanna get out from the stock rom . I used gsi roms on my previous phone ( lg g3) and I was really enjoying while using gsi roms . now the one ui 3.1 has so many bugs or idk maybe they are only happening to me but I got really sick of that
haiise said:
I have a question. did you install the twrp to one ui 3.1 ? pls answer me bc I wanna get out from the stock rom . I used gsi roms on my previous phone ( lg g3) and I was really enjoying while using gsi roms . now the one ui 3.1 has so many bugs or idk maybe they are only happening to me but I got really sick of that
Click to expand...
Click to collapse
I first flashed twrp-black or something and it didn't work properly so I installed twrp-official downloaded from website. But then, after installing the official one, the recovery got corrupted. I couldn't boot into downloadmode, but luckily, it was just some key combination that was wrong, so, with a right key combination. I booted into download mode and reinstalled the initial firmware.
sarthak.whenever said:
I first flashed twrp-black or something and it didn't work properly so I installed twrp-official downloaded from website. But then, after installing the official one, the recovery got corrupted. I couldn't boot into downloadmode, but luckily, it was just some key combination that was wrong, so, with a right key combination. I booted into download mode and reinstalled the initial firmware.
Click to expand...
Click to collapse
Ohh glad to hear that you fixed your phone
Hello, I just finished to install LineageOS on my A20 and after reboot I saw the same message of Samsung Knox and the bootloader warning then a black screen and reboot automatically. Any sugestions?
sh_amuel said:
Hello, I just finished to install LineageOS on my A20 and after reboot I saw the same message of Samsung Knox and the bootloader warning then a black screen and reboot automatically. Any sugestions?
Click to expand...
Click to collapse
Yes, it just looks like it is bricked but it is not yet completely bricked.
The solution was simple.
First, completely power off device (don't restart, just turn off). After that, by certain keys combination, go to download mode.
It seems it doesn't work while restarting but works if it is completely turned off.(At least in my case it had been so)
sarthak.whenever said:
Yes, it just looks like it is bricked but it is not yet completely bricked.
The solution was simple.
First, completely power off device (don't restart, just turn off). After that, by certain keys combination, go to download mode.
It seems it doesn't work while restarting but works if it is completely turned off.(At least in my case it had been so)
Click to expand...
Click to collapse
I do know how to enter in download mode, but even when I upload the TWRP again and start over the process it get into the same black screen. I was wondering if Samsung Knox is blocking this action.
I have a one A20(SM-A205F).And I when installing the rom with odin in device, I unplugged the device cable on pc. Since that time device no reaction.PC, seen one second device's processor name. Can I bring the device back to life ?
MrMusti53 said:
I have a one A20(SM-A205F).And I when installing the rom with odin in device, I unplugged the device cable on pc. Since that time device no reaction.PC, seen one second device's processor name. Can I bring the device back to life ?
Click to expand...
Click to collapse
try to flash original software
haiise said:
try to flash original software
Click to expand...
Click to collapse
Any program can't see the device and the pc only saw it for a second
MrMusti53 said:
Any program can't see the device and the pc only saw it for a second
Click to expand...
Click to collapse
can you go to download mode ?
haiise said:
can you go to download mode ?
Click to expand...
Click to collapse
No, phone's no reaction
MrMusti53 said:
No, phone's no reaction
Click to expand...
Click to collapse
konudan bağımsız türk müsün la
Translated by GT: independent of the subject are you turkish
sarthak.whenever said:
Thanks solved
Click to expand...
Click to collapse
it didnt work for me , is there any other combo

Categories

Resources