Bottom of screen (1cm) not touch sensitive with nav. - Nexus 4 Q&A, Help & Troubleshooting

Hi all,
I dropped my nexus in water about a month ago, it didn't work for about 2 days and then day 3 it came out of rice and voila, it worked.. not a single issue, although the bottom of the screen where the nav buttons are, don't detect touch when the nav is visible, although when I remove nav and just touch the screen there, it acknowledges my touch.
Any thoughts? I've uploaded a video to explain a little more.
It's the same with stock rom, cm10.1 and pa.
Video here: http://www.youtube.com/watch?v=DQFR2XtlskI&feature=youtu.be

Anyone? Maybe I should take it apart?

T89 said:
Anyone? Maybe I should take it apart?
Click to expand...
Click to collapse
(Edit) Didn`t read the last part correctly (sorry for that), try reflashing the rom you are on or a factory image to see if the problem remains.

It works when no navbar is there, but doesn't when a navbar is present? Sounds like a software issue to me.

I thought so too, but I believe it's the "multitouch" function that constantly enabled down the bottom.. as if something is already touching it, so it doesn't allow a second touch. Which is why I thought I'd take it apart and see if something is possibly doing that..

T89 said:
I thought so too, but I believe it's the "multitouch" function that constantly enabled down the bottom.. as if something is already touching it, so it doesn't allow a second touch. Which is why I thought I'd take it apart and see if something is possibly doing that..
Click to expand...
Click to collapse
nav bar doesnt work
but with no nav bar it recognizes your touch, so just reflash the rom or another rom. simple as that.

Related

HTC Shift Touchscreen Problems

Has anyone had problems with their touchscreen not responding to their pen or fingertips? I received my Shift a couple of days ago and I have tried everything that I know to get the touchscreen working. Called support, but they had no solutions as well. The funny thing is, that when the computer first boots, after I enter my password, I can control the cursor for a couple of seconds and then it loses all ability to pick up my movements and taps. Also, when I reset snapvue, I can move the scroll bars but cannot double tap any icons to launch. I am sure it is some sort of software issue, but I have limited UMPC experience.
cschmiddy said:
Has anyone had problems with their touchscreen not responding to their pen or fingertips? I received my Shift a couple of days ago and I have tried everything that I know to get the touchscreen working. Called support, but they had no solutions as well. The funny thing is, that when the computer first boots, after I enter my password, I can control the cursor for a couple of seconds and then it loses all ability to pick up my movements and taps. Also, when I reset snapvue, I can move the scroll bars but cannot double tap any icons to launch. I am sure it is some sort of software issue, but I have limited UMPC experience.
Click to expand...
Click to collapse
I had the same problem. I had put my screenprotector the wrong way.
So, try to take of the sheet. Maybe that may help!
Huib
Isnt that just classic, I didnt know that you could put a screen protector on the wrong way. Well theres a couple days I wont be getting back. Out of curiosity, what is the right way to put the screen protector on? Thanks for the response - all is well, except for my slight embarassment!
Hmm... a screen protector is sticky on one side, and not on the other.
How do you put it on the wrong way?
cschmiddy said:
Isnt that just classic, I didnt know that you could put a screen protector on the wrong way. Well theres a couple days I wont be getting back. Out of curiosity, what is the right way to put the screen protector on? Thanks for the response - all is well, except for my slight embarassment!
Click to expand...
Click to collapse
Well, just put it once more. But under the edges you should put it correctly. Try your fingernails to put it firmly under the edges.
Huib
thanks
i try to fix the broblem with touch screen in about 3 days. i make everythink.....i read your post and you save me.there was a broblem with the screen protector...
thanks..thanks. i am ready to go tomorow at service htc...

Vertical touch area not working

Hello,
After many hours of searching I havent found something that is like my problem. I got this model recently, and now the touch area issint working. In landscape mode only the bottom of the screen is working.
Is does not mather if you push for example in the left upper side corner or the left lower side corner.... Both will result in getting "Phone" up
I havent tried a hard reset or something. And Im running the standard Vodafone rom on it. (Windows mobile 5)
Is this problem hardware or software? and is there perhaps some kind of software so I can get a mouse cursor with my Arrow-keys?
I hope you guys can give me some answers. Its a waste not using this phone
I have also no idea what the reason is why its not working. It did not drop on the floor or something like that.
Thanks in advance,
Erlerain
erlerain said:
Hello,
After many hours of searching I havent found something that is like my problem. I got this model recently, and now the touch area issint working. In landscape mode only the bottom of the screen is working.
Is does not mather if you push for example in the left upper side corner or the left lower side corner.... Both will result in getting "Phone" up
I havent tried a hard reset or something. And Im running the standard Vodafone rom on it. (Windows mobile 5)
Is this problem hardware or software? and is there perhaps some kind of software so I can get a mouse cursor with my Arrow-keys?
I hope you guys can give me some answers. Its a waste not using this phone
Thanks in advance,
Erlerain
Click to expand...
Click to collapse
Welcome to the forum
I´ve never heard of this problem, but if I were you I try to reflas with another ROM to see if corrects (see the Wiki to learn how to), if not perhaps could be a hardware problem...
Good luck,
erlerain said:
Hello,
... In landscape mode only the bottom of the screen is working.
Is does not mather if you push for example in the left upper side corner or the left lower side corner.... Both will result in getting "Phone" up
...
Thanks in advance,
Erlerain
Click to expand...
Click to collapse
Have you tried to re-align the screen?
wovens said:
Have you tried to re-align the screen?
Click to expand...
Click to collapse
Yes, but it is not getting the points that it should get. So you can try it a thousand times, and it would not make a diffreance.
Anyone? (sorry to bumb)
I have the same problem. Though I read on someplace that the screen is actualy getting pressed somewhere. try these steps and check after each try.
1st: Massage the screen softly all over.
2nd: Take a something very thin and move it under the edges of the screen.
3rd: (this on is the one that usualy works for me) try to tap softly on the back of the screen.(The aluminum plate) tap it all around the back of it.
4th: (this is the last way out when step 3 doesn't work for me.) Tap softly around the screen.
Gonna put up a video on youtube on how I do it. so you get to know how hard to tap and stuff. Since I guess we're not the only people with this problem.
Edit: Ehm. does anyone know a good free webcam recording program so I can make a video.
Ive already tried those steps. did not work
Then open the monitor part of the phone and press on the backside of the LCD.
Yep, thought the same. Ive tried to open the casing of the monitor part, but its pretty hard to get the plastic cover off
Ill try it soon again.
Thanks MiZore for ur active answering
No problem, but if you find a solution that lasts please write how here. Because I also have this problem. You have to use a little force to the the cover off. There is a dissassembly guide somewhere, I can find it for you if you haven't used it already.
i dont have that guide
Here's the guide
http://wiki.xda-developers.com/index.php?pagename=HTC Universal Service Manual
I've found another temporary solution. Take a good grip on each side of screenpart of the universal, then bend it softly back and then forth. This hasn't failed me once yet. But still no permanent solution.
gonna open mine and put something that will apply a constant pressure to the back of the screen like som cotton or something simmilar. I'll let you know the results.
Also, do you use a replacement battery or the original that came with the Uni?
Okay I opened it up today, and I think I've found the problem. Though not 100% sure. From my inspections one of the cables(small ones inside the silver tape) on the flexcable is not connected. and sadly I'm not that skilled with fixing it. So I'm gonna order a new one. I will tell you if it helps.
Okey, so I continued working on the uni today again.
Ive de-assembled the entire screen section. inspected it if anything looked broken. Wich was not the case.
Re-assembled everything again. but I still have the same problem.
As far as I know I use the retail battery
When I have some spair time ill try to look for some damaged cables.
I dont see the future of this device very brightfull
erlerain said:
Okey, so I continued working on the uni today again.
Ive de-assembled the entire screen section. inspected it if anything looked broken. Wich was not the case.
Re-assembled everything again. but I still have the same problem.
As far as I know I use the retail battery
When I have some spair time ill try to look for some damaged cables.
I dont see the future of this device very brightfull
Click to expand...
Click to collapse
Well I had to cut open the gray cover for the cables to see the damage.
But I'll see what happens when my new cable arrives.
I've installed the new cable and that fixed the touchscreen for me.
But now my sound won't work for some reason....

Major touch screen problem with touch hd!!

touchscreen was working today morning, took battery out for 2 hours, turned it back on and it was working abit weird, and now i cant press any touchscreen buttons atall!
So no softkeys (pick call, home etc.) and nothining on the big screen! I can turn on the phone, press the power button and volume buttons, see my home screen get calls etc.. hard reset twice, took battery out, nothing does it .. gonna try flash it but dont think itll do it ... and ideas?
Im in uk aswell if that makes a diff
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
I had the same thing, a oily spot, but it was there for months, then i noticed another new spot (looked like a tiny tiny burn) and thats when it stopped working completely... ive ordered a new screen which should be comming in a few days, im hoping thats the issue
will let you know if it works ....
keep me updated if you find anything
thanks!
NECROSTONE said:
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
Click to expand...
Click to collapse
download and install this _HTC Touch HD_TouchHD system.exe
BOLDESH said:
download and install this _HTC Touch HD_TouchHD system.exe
Click to expand...
Click to collapse
whats it do? and where from??
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
ok basically i received a new digitizer today (the actual touchscreen) ...
i dismantled the whole phone using the service manual and some video some guy made (VERY HELPFUL, if anyone wants it for any reason i can post a link), ok so i got rid of all the top bits, the circuit boards (or watever theyre called)
I got down to just the bezel, lcd and digitizer (dont know what a bezel is, the lcd is where the display actually is and digitizer is directly stuck ontop of that)
Apparently when replacing the screen, htc have made it so that you have to replace all three of those parts instead of individual ones, but you can buy them seperately so i thought i'd hero it.
i poked out the screen from the frame (some chewingum like stuff holding it in) then i started peeling off the digitizer (if you get one and want to try it you'll know where to peel) ... this was a mistake tho cause the lcd is unbelievebly sensitive so while peeling off it left scratches on the lcd, and me not knowing the lcd is sticky tried to wipe them and use a dust free cloth, which left alot of crap on the actual lcd!
i managed to get the digitizer off and ripped the cable that goes from digitizer to whatever reads our fingers on the screen, took it all off, placed the new one directly ontop and fed the wire exactly how it was for the first screen.
Put it all together again
Now I did mess up my screen badly, but in a good way! .. i now have full touchscreen working (smoother than ever) but my LCD display is near enough gone, so it looks like the screens really really dark, and i have to tilt it at certain angles to see the screen..
After all of this i now have a touch hd i can controll from my pc (using mymobiler) so i can recieve calls, send texts all from my pc when connected thru active sync, can even play teeter ... but not really the same!
I wouldnt recomend anyone to try what i did, although i think its worth the risk as I would have to replace the lcd anyways if i wanted a new screen in the first place... and who knows you might be able to peel the digitizer off clean (NEVER EVER EVER TOUCH LCD WITH ANYTHING!!!).
It all cost me around 10-15£ for the digitizer and screwdrivers and alot of hours dismantling phone compared to 50-100£ for a new lcd.
I am either going to get a new lcd now so i can actually see the screen, or get a new phone.
Sorry for the essay but hopefully this helps someone in any similar situation
if i do get a new lcd will post how it goes and if it sorts out everything
if anyone knows of any other reasons why my lcd would be so dim (brightness is 100%) accept for me getting carried away with it ... help would be appreciated
the_cool said:
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
Click to expand...
Click to collapse
Yeah swirly oil marks is how myne started ... i think i finished off the screen by trying to press hard on the mark to try and clear it .. . so be careful with it.. but think that overall the screen had seen better days (course only a few weeks after warrenty finishes) ... all conections inside were ok aswell
doczyus said:
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
Click to expand...
Click to collapse
Same here. Touch screen not working. Phone never flashed, droped,...
Any solution?
unfortunately, a friend of mine changed the touchscreen without success. Phone was in perfect state, no drop, no flash. Just the touch not responding. I'm not sure that changing whole part lcd+digitizer solve the problem.
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
igothtc2 said:
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
Click to expand...
Click to collapse
use ScreenCal to fix it, hopefully it can help you
Hakim Rahman said:
use ScreenCal to fix it, hopefully it can help you
Click to expand...
Click to collapse
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
igothtc2 said:
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
Click to expand...
Click to collapse
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Hakim Rahman said:
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Click to expand...
Click to collapse
Just did the hard reset. When it asked me to align the screen, I just couldn't align the top left corner. I had to press it like 50 times before cross went to the lower corner. Otherwise, after the align it's good for about couple of seconds and then it's just pressing all over.
I thought I had just some software issues because the screen wasn't dead, it responded to my touch. So, I'll probably have to buy a new screen and digitizer, right? Or do you have any other ideas?
Thank you again for your help!
Regards
firstly screencal installs calibration settings not for blackstone so do not install it, no point. (btw it also increases device touch sensitivity)
secondly you guys should try and install the calibration settings for blackstone, basicly what the align screen does, not sure where to find them for download but i could post the registrys if someone wants to make a .cab from them. (atm i cba making the .cab but i am able to do it )
if the calibration settings do not work i think it is best to buy a new lcd package (or buy new device and give me old one for spares oj)
Rn
hi buddy ! What you mean GSensorCalibrator ??
i didnt mention anything about gsensor calibration dude.
tried and tested screencal the other week and it screwed my blackstone.
install these instead:
*screen calibration, sets the blackstone touch points: (aligning the screen)
if you install a cab with these registrys it should fix the alignment problem.
(if it doesnt then its hardware issue = lcd etc)
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"MaxCalError"=dword:8
"CalibrationData"="511,542 183,881 183,198 834,197 833,880"
*this one will maximise the touch sensitivity for those that want it:
[HKEY_LOCAL_MACHINE\Drivers\TouchPanel]
"PressureThreshold"=dword:0
Rn
Does anyone have a recommendation where you can buy a digitizer and lcd from?

Does my touchscreen have parkinson?

Hey everbody,
I can't remember if i've had this problem before, but my DHD came back from repairs 4 weeks ago. Touchscreen was removed to refix it because it was a little lose at some points.
Got it all back and repaired, new camera coating etc. But.....
I (Sometimes!) notice when i pull down my status bar, or my lock screen, and i stop before pulling it all the way down (So holding it in the middle of the screen with your finger).. the bar starts shaking like hell.
It's like i have a really big finger and the screen doesnt know where to go with the status bar. Even when i just hold the screen with my nail the problem stays.
Problem only occurs vertically, not horizontally and doesn't always seem to be there..
Do other desire HD's have this also? Is it normal? And if it isn't does anyone know a quick fix? (Tried cleaning screen, restarting..etc)
Thanks in advance!
http://forum.xda-developers.com/showthread.php?t=946834
Here you go! Seems that every DHD has this problem.
Noticed the topic, but not sure if it is the same.
I also have the problem with drawing lines diagonally when doing it slow, not fast.
But it does not seem to be the same problem as i am referring to right now.
http://www.youtube.com/watch?v=A4jgpZSwwyQ
This other brand phone seems to have the same
Flussen said:
http://forum.xda-developers.com/showthread.php?t=946834
Here you go! Seems that every DHD has this problem.
Click to expand...
Click to collapse
Incorrect my friend, you will notice that the OP states the problem is in vertical scrolling and not horizontal. That thread is all about the horizontal scroll problem that affects a huge number of touch-screens in a great many devices.
haahah funny title hope u fix that.

Touchscreen Issue

Hello. I am having issues with my touch screen. Sometimes stuff will open automatically or the screen will act irratically and go back and fourth on my home screen by itself. Sometimes I can't click on things. The update all button in the playstore is unhittable. It's very frustrating. I'm on d803 running cloudy kit Kat 2.2. I've tried updating touch screen firmware. I've tried doing a clean flash of the Rom and other Roms. I've changed kernels. The just started happening out of the blue. Faulty screen?
Sounds like broken digitalizer.. Try kdz/tot stock, if that doesn't help, you probably need a new part. Stuff breaks
Also take a look at this thread, you might find some helpful info http://forum.xda-developers.com/showthread.php?t=2521663
adam1741 said:
Hello. I am having issues with my touch screen. Sometimes stuff will open automatically or the screen will act irratically and go back and fourth on my home screen by itself. Sometimes I can't click on things. The update all button in the playstore is unhittable. It's very frustrating. I'm on d803 running cloudy kit Kat 2.2. I've tried updating touch screen firmware. I've tried doing a clean flash of the Rom and other Roms. I've changed kernels. The just started happening out of the blue. Faulty screen?
Click to expand...
Click to collapse
Try a drawing app...do you have a bar that won't register touch or only registers upward and downward strokes? Usually 1/4 inch thick and around an inch from the top of screen
jamesd1085 said:
Try a drawing app...do you have a bar that won't register touch or only registers upward and downward strokes? Usually 1/4 inch thick and around an inch from the top of screen
Click to expand...
Click to collapse
Yes I tried a drawing app and what's what happens.
MilanStojkovic said:
Sounds like broken digitalizer.. Try kdz/tot stock, if that doesn't help, you probably need a new part. Stuff breaks
Also take a look at this thread, you might find some helpful info http://forum.xda-developers.com/showthread.php?t=2521663
Click to expand...
Click to collapse
And ya I found the after haha sounds like I need to pop the back off and check it out.

Categories

Resources