Both of these apps worked on the previous version of the software for me, but now neither is for different reasons.
"Mail By Google" returns the error:
"Your phone doesn't support end-to-end secure connections (reason: Cause unknown). In order to protect your data, Mail By Google for mobile cannot be used at this time.
"GMail" returns this error:
This program required a data connection. Please contact your carrier, or visit the GMail for mobile FAQ on your ocmputer for more info.
The proxy has been disabled, both by running the CAB and by running KaiserTweak, and other browsers work fine, both Pocket IE and others that I have installed to play around with.
The phone is an AT&T Tilt, and it has the official ROM released a few days ago.
P.S. - I am willing to try one of the cooked ROM's if it'll work with AT&T's network right out of the box.
I'm having the same problems, please if anyone has suggestions please let me know. I'll even revert back to the original ROM if I could find it anywhere.
Same issue here as well using a cooked ROM. I've seen T-mobile related posts on blogs saying this is an issue with the GPRS settings but I've reset mine back to default to make sure and still having the same issue.
I am having the same problem since updating to the latest AT&T firmware. It worked fine with the shipped ROM (just got the device yesterday), but doesn't work with the new one.
You might need to unlock CAPTCHA on that email account, here's a good write up: http://www.mydigitallife.info/2008/...dentials-or-web-login-requires-failure-error/
NOTE: For Google Apps user, visit https://www.google.com/a/yourdomain.com/UnlockCaptcha instead, with yourdomain.com as the valid domain name.
I would like to run the Blackberry Connect 4.0 Software on my HTC HD2 witrh Winmo 6.5
My Service provider in India Vodafone says they are not sure if it will work
HTC Service center says < no HTC phone support Blackberry ??? LOL
Please advice me if I can use the Blackberry sevrice on the HTC HD2 to recive & Send Emails
I curse my self why I didnd buy a blackberry phone & tried my stunts with a winmo
Please advice
ayr_ray said:
I would like to run the Blackberry Connect 4.0 Software on my HTC HD2 witrh Winmo 6.5
My Service provider in India Vodafone says they are not sure if it will work
HTC Service center says < no HTC phone support Blackberry ??? LOL
Please advice me if I can use the Blackberry sevrice on the HTC HD2 to recive & Send Emails
I curse my self why I didnd buy a blackberry phone & tried my stunts with a winmo
Please advice
Click to expand...
Click to collapse
Not available for WinMo 6.5 esp. an HD2 working addon.
I suggest you use Microsoft Exchange for the time being.
"esp. an HD2 working addon." ??
are you working on an add on ?
will a registry hack permit intallation and running of Balckberry connect 4
I tried contacting blackberry , but they requested we contact service provider
I belive there is some hot fix for some HTC devices by hacking the Registry
Will it work with HTC HD2
Please advice , I am desprate to make it work
Nope Im not working on one as RIM usually provides the solution and chefs take that one solution from a particular ROM and modded to make it compatible with other devices. It seem RIM hasn't created a WinMo 6.5 compatible BB Connect app.
ayr_ray said:
I would like to run the Blackberry Connect 4.0 Software on my HTC HD2 witrh Winmo 6.5
My Service provider in India Vodafone says they are not sure if it will work
HTC Service center says < no HTC phone support Blackberry ??? LOL
Please advice me if I can use the Blackberry sevrice on the HTC HD2 to recive & Send Emails
I curse my self why I didnd buy a blackberry phone & tried my stunts with a winmo
Please advice
Click to expand...
Click to collapse
Despair no more. I have it working (see my signature!)
This is what you do:
BEFORE INSTALLING Blackberry Connect you do the following:
* Use a registry editor and change the AKU to .1.6.3 (HLMK\System\Versions) --> Please note the leading dot before the number 1.
With AKU .1.6.3 you will get email but not the Blackberry browser, i.e. Internet Explorer using the Blackberry Internet connection, but believe me: You don't need that.
Resco Registry Editor (not free) is a good choice, but there are others.
* Create a new String registry entry under HLKM\Init called Launch130 and set its contents to SetModelID.exe (Case SeNsiTive!!!)
* Copy/Paste SetModelID.exe to the Windows folder in your Phone
* You can find SetModelID.exe here: http://forum.xda-developers.com/showthread.php?t=520413&page=4
* SetModelID will trick BB Connect into thinking you have a different phone.
* Install BB Connect 4.0.0.106 (It will soft reset after the initial configuration/installation)
* You can get BB Connect 4.0.0.106 from http://www.sems.org/entry.asp?entry_id=338
* After reboot, you may see a window with an error message about security failed or something like that. If you get that, you won't be able to run Enterprise Activation. That means that the BB Security Service couldn't start. That's a timing issue found with Windows Mobile 6.5.X.
To make that service start you need Task Manager v3.1 from FdcSoft. Start Task Manager and go to Services and press on restart service (icon at the bottom). Task Manager will seem to lock up for a few seconds. Be patient. Once BB Security Service is running you can continue with Enterprise Activation.
* Run the Wireless Enterprise Activation process (No need for BB Desktop Manager)
* Remember that your BES Administrator must set your activation password in your BES Server and of course, you have to have the Blackberry Service from your wireless carrier.
Questions? Let me know how it goes.
Good Luck!!!
Hi Miscom
I own an HD 2 , I belive you own an HD
I tried all that you Said
a) Changed the AKu Value to .1.6.3 from the original .5.0.82
b) Created a Registry String : HLKM\Init called Launch130 set value to SetModelID.exe
c) Copied the file SetModelID.exe to the windows folder
d) Installed BB Connect 4.0.0.106
but I did not get Security failed as suggested by you
my HD2 booted and the BBC SHowed my IMEI but said pin Pending
I have the Task manager 3.1 as said by you but the BB Service doesnot show as stoped
The Task Manager Services Shows Black Berry Security (BBDO
A system folder was created in the Mails Folder ???
but no Black Berry Connect
When I click Black Berry It shows BlackBErry Lock Device
The Black Berry Security Settings
How can I confirm my Black BErry Connect Service is working
How can I configure my Accounts
Why does Black BErry icon lead e to a screen with a lock with the name black berry Lock
Will your efforts work on HTC HD2 LEo Running ROM VErsion 1.48.720.2
If I have failed do I need to revert the changes to the originals to prevent further problems
Thanks in advance
miscom said:
Despair no more. I have it working (see my signature!)
This is what you do:
BEFORE INSTALLING Blackberry Connect you do the following:
* Use a registry editor and change the AKU to .1.6.3 (HLMK\System\Versions) --> Please note the leading dot before the number 1.
With AKU .1.6.3 you will get email but not the Blackberry browser, i.e. Internet Explorer using the Blackberry Internet connection, but believe me: You don't need that.
Resco Registry Editor (not free) is a good choice, but there are others.
* Create a new String registry entry under HLKM\Init called Launch130 and set its contents to SetModelID.exe (Case SeNsiTive!!!)
* Copy/Paste SetModelID.exe to the Windows folder in your Phone
* You can find SetModelID.exe here: http://forum.xda-developers.com/showthread.php?t=520413&page=4
* SetModelID will trick BB Connect into thinking you have a different phone.
* Install BB Connect 4.0.0.106 (It will soft reset after the initial configuration/installation)
* You can get BB Connect 4.0.0.106 from http://www.sems.org/entry.asp?entry_id=338
* After reboot, you may see a window with an error message about security failed or something like that. If you get that, you won't be able to run Enterprise Activation. That means that the BB Security Service couldn't start. That's a timing issue found with Windows Mobile 6.5.X.
To make that service start you need Task Manager v3.1 from FdcSoft. Start Task Manager and go to Services and press on restart service (icon at the bottom). Task Manager will seem to lock up for a few seconds. Be patient. Once BB Security Service is running you can continue with Enterprise Activation.
* Run the Wireless Enterprise Activation process (No need for BB Desktop Manager)
* Remember that your BES Administrator must set your activation password in your BES Server and of course, you have to have the Blackberry Service from your wireless carrier.
Questions? Let me know how it goes.
Good Luck!!!
Click to expand...
Click to collapse
Thank You but Do Not Work with my HD2 Leo I do all your issues and nothing still IP pending and not connect??? My OS version is 5.2.21869 Manila version 2.5.19211619.0 and the important thing my ROM version is 1.48.412.2 (71294) ESN Radio Version 2.05.51.05_2. Any suggestion??
Any way thank you for your ideas nad trying
ayr_ray said:
Hi Miscom
I own an HD 2 , I belive you own an HD
I tried all that you Said
....
but I did not get Security failed as suggested by you
my HD2 booted and the BBC SHowed my IMEI but said pin Pending
I have the Task manager 3.1 as said by you but the BB Service doesnot show as stoped
The Task Manager Services Shows Black Berry Security (BBDO
A system folder was created in the Mails Folder ???
but no Black Berry Connect
When I click Black Berry It shows BlackBErry Lock Device
The Black Berry Security Settings
How can I confirm my Black BErry Connect Service is working
How can I configure my Accounts
Why does Black BErry icon lead e to a screen with a lock with the name black berry Lock
Will your efforts work on HTC HD2 LEo Running ROM VErsion 1.48.720.2
If I have failed do I need to revert the changes to the originals to prevent further problems
Thanks in advance
Click to expand...
Click to collapse
I think we are on the right track. Yes, I have an HD but that procedure works on Windows Mobile 6.5.X regardless of device.
You say that it says PIN pending, but did you get an IP Address? If so, BB Connect is working properly. For the PIN Pending issue read on:
Not getting the security failed message is a good thing. It means that BB Connect was able to initialize all of its services with no issues; and that's why Task Manager is showing it as started already!
That said, there will be times when it won't be able to do it after a soft reset and that's when Task Manager comes in handy.
As part of the installation a system folder (or new account) will be created.
Once BB Connect initializes it will talk to your Wireless Carrier to register itself in the network. If the registration is successful you will find a new email in the system mailbox saying something like your device has been registered to the network.
At this point there are a few things we can try:
1. Go to Settings --> System --> Blackberry
a. Once Blackberry loads, scroll to the right until you are in the Utility Tab
b. Tap on Register Now.
c. After a few seconds you should receive an email in the System Account saying that your device is registered in the network.
This is critical because that registration sends to your device the host routing table and the service books from RIM and your carrier so that your device is correctly provisioned to get Blackberry email.
If after registration you don't get the email in the system account or you don't get PIN it could mean one or more of the following issues:
1. Besides having a data plan with your wireless carrier, do you also have a Blackberry Plan for PDA? (Blackberry Plan for PDA is what AT&T calls it in the USA. If you don't have it, BB Connect won't work)
2. Has an account being provisioned in the BES Server in your organization?
If not you need to ask your BES Administrator to provision one for you.
If yes, you need to ask your BES Administrator to assign an activation password to your account.
After yout BES Administrator assigns the Activation Password to your BES Account, in your device you do the following:
Settings --> System --> Blackberry
Go to the activation tab
Enter your BES Server email account and activation password
Tap on Activate.
If all goes well, after a few minutes (be patient), the activation process will finish and you will start receiving emails in your BB Account.
Let me know how it goes.
v1zca1n0 said:
Thank You but Do Not Work with my HD2 Leo I do all your issues and nothing still IP pending and not connect??? My OS version is 5.2.21869 Manila version 2.5.19211619.0 and the important thing my ROM version is 1.48.412.2 (71294) ESN Radio Version 2.05.51.05_2. Any suggestion??
Any way thank you for your ideas nad trying
Click to expand...
Click to collapse
v1zca1n0,
Please read my previous post.
Do you get an IP Address?
Settings --> System --> Blackberry (Status Tab).
Are you provisioned with your Wireless Carrier for Blackberry Connect?
Have you been provisioned in your BES Server?
v1zca1n0,
Something comes to mind and this may sound a bit strange but...
Sometimes Wireless Carriers won't activate your BB Connect service if your device's IMEI number is not in the list of devices that support BB Connect, in this case in a Leo.
The way to trick them into doing this is to insert your SIM Card into another device that is supported by the Carrier with BB Connect (ATT Fuze in my case). Install BB Connect and activate it. It should go through with no issues.
Once your SIM Card is registered as a valid card that can use BB Connect, put it back into your device, install BB Connect and you should be good to go.
I know that this sounds like a long shot, but I did it once a year ago to get my ATT Fuze with BB Connect because at that time the Fuze was not supported by AT&T with BB Connect but I had a Tilt and that one was supported.
And now I am using that same SIM Card with an HTC T8285 (Telstra Australia) in the AT&T Network with BB Connect.
Saludos,
miscom said:
v1zca1n0,
...
The way to trick them into do it is to insert your SIM Card into another device that is supported by the Carrier with BB Connect (ATT Fuze in my case). Install BB Connect and activate it. It should go thorugh with no issues.
Once your SIM Card is registered as a valid card that can use BB Connect, put it back into your device, install BB Connect and you should be good to go.
I know that this sounds like a long shot, but I did it once a year ago to get my ATT Fuze with BB Connect because at that time the Fuze was not supported by ATT with BB Connect but I had a Tilt and that one was supported.
Saludos,
Click to expand...
Click to collapse
Hi,
I tried that as I have the BBC activated on RAPHAEL, however when I put it to LEO the PIN is still pending.
Salu2
miscom said:
v1zca1n0,
Please read my previous post.
Do you get an IP Address?
Settings --> System --> Blackberry (Status Tab).
Are you provisioned with your Wireless Carrier for Blackberry Connect?
Have you been provisioned in your BES Server?
Click to expand...
Click to collapse
I do... I am... Yes... but nothing
[Something comes to mind and this may sound a bit strange but...
Sometimes Wireless Carriers won't activate your BB Connect service if your device's IMEI number is not in the list of devices that support BB Connect, in this case in a Leo.
The way to trick them into doing this is to insert your SIM Card into another device that is supported by the Carrier with BB Connect (ATT Fuze in my case). Install BB Connect and activate it. It should go through with no issues.
Once your SIM Card is registered as a valid card that can use BB Connect, put it back into your device, install BB Connect and you should be good to go.
I know that this sounds like a long shot, but I did it once a year ago to get my ATT Fuze with BB Connect because at that time the Fuze was not supported by AT&T with BB Connect but I had a Tilt and that one was supported.
And now I am using that same SIM Card with an HTC T8285 (Telstra Australia) in the AT&T Network with BB Connect.
Saludos,]
I will try but I use to have a diamond 2 (Topaz) untill it break down and no problems at all I was regristed in the BB System and use it with any kind of limits... Whit Leo no is a pity.... Anyway gracias
See this
http://forum.xda-developers.com/showpost.php?p=5237897&postcount=69
miscom said:
I think we are on the right track. Yes, I have an HD but that procedure works on Windows Mobile 6.5.X regardless of device.
You say that it says PIN pending, but did you get an IP Address? If so, BB Connect is working properly. For the PIN Pending issue read on:
Not getting the security failed message is a good thing. It means that BB Connect was able to initialize all of its services with no issues; and that's why Task Manager is showing it as started already!
That said, there will be times when it won't be able to do it after a soft reset and that's when Task Manager comes in handy.
As part of the installation a system folder (or new account) will be created.
Once BB Connect initializes it will talk to your Wireless Carrier to register itself in the network. If the registration is successful you will find a new email in the system mailbox saying something like your device has been registered to the network.
At this point there are a few things we can try:
1. Go to Settings --> System --> Blackberry
a. Once Blackberry loads, scroll to the right until you are in the Utility Tab
b. Tap on Register Now.
c. After a few seconds you should receive an email in the System Account saying that your device is registered in the network.
This is critical because that registration sends to your device the host routing table and the service books from RIM and your carrier so that your device is correctly provisioned to get Blackberry email.
If after registration you don't get the email in the system account or you don't get PIN it could mean one or more of the following issues:
1. Besides having a data plan with your wireless carrier, do you also have a Blackberry Plan for PDA? (Blackberry Plan for PDA is what AT&T calls it in the USA. If you don't have it, BB Connect won't work)
2. Has an account being provisioned in the BES Server in your organization?
If not you need to ask your BES Administrator to provision one for you.
If yes, you need to ask your BES Administrator to assign an activation password to your account.
After yout BES Administrator assigns the Activation Password to your BES Account, in your device you do the following:
Settings --> System --> Blackberry
Go to the activation tab
Enter your BES Server email account and activation password
Tap on Activate.
If all goes well, after a few minutes (be patient), the activation process will finish and you will start receiving emails in your BB Account.
Let me know how it goes.
Click to expand...
Click to collapse
Kindly i've followed the installation procedure
but still the name of the device hasn't changed...
my device is HTC jade (touch3G)
Yeah tried it, and I can confirm it..
BBC and BAS couldn't work with HD2 yet..
I got my pin in my X1 but couldn't even connect to the network in HD2.. well it connected for a while.. then it disconnected it self..
kindly i would appriciate a feedback who had tried it on HTC-Jade (Touch 3G) & it worked for him.
was there any tricks to get it work?
i added the reg key "launch130" & added the "SetmodID.exe" in windows folder & running it manually. I installed the bbconnect, & after restrarting the device there was no error, & the application started smoothly. but as for the device name in BBC wasn't changed it's always HTC-Jade. when trying to connect the tunnel & IP address are shown, the PIN=pending....
any comments or suggestions!!!!!!
thank you
anyone????
A possible way to make BB Connect work
Hello all,
I know that the procedure explained in the attached Word document may seem like a long shot; but I think it's worth a try.
I don't own an HD2, but by following this procedure I was able to install and run the Blackberry Application Suite in my Blackstone.
You see, the HTC-BlackStone is not supported by the BAS and an tried many versions of SetModelID.exe and none of those worked, but by changing the Device Model ID in the ROM to HTC-Raphael before flashing I was able to trick BAS and make it install and run with no issues.
If someone wants to give it a try, please let me know whether or not it worked.
I am attaching two files: One is a screen shot of my Blackstone being identified by Blackberry Connect as an HTC-Raphael and the second one is a Word document explaining the procedure on how to change the Device Model ID.
miscom said:
Hello all,
I know that the procedure explained in the attached Word document may seem like a long shot; but I think it's worth a try.
I don't own an HD2, but by following this procedure I was able to install and run the Blackberry Application Suite in my Blackstone.
You see, the HTC-BlackStone is not supported by the BAS and an tried many versions of SetModelID.exe and none of those worked, but by changing the Device Model ID in the ROM to HTC-Raphael before flashing I was able to trick BAS and make it install and run with no issues.
If someone wants to give it a try, please let me know whether or not it worked.
I am attaching two files: One is a screen shot of my Blackstone being identified by Blackberry Connect as an HTC-Raphael and the second one is a Word document explaining the procedure on how to change the Device Model ID.
Click to expand...
Click to collapse
i want to buy the HD2 and need BBConnect. What you have done looks the same as the setmodelid cab that has been floating around for a while. it worked for me on my TP2 but apparantly not on the HD2. I have attached it for reference (and a LEO one someone posted that I have no idea if it works). is what youare doing differnet?
ekerbuddyeker said:
i want to buy the HD2 and need BBConnect. What you have done looks the same as the setmodelid cab that has been floating around for a while. it worked for me on my TP2 but apparantly not on the HD2. I have attached it for reference (and a LEO one someone posted that I have no idea if it works). is what youare doing differnet?
Click to expand...
Click to collapse
Yes, it's different because this change is made to the ROM file before it's flashed into the phone.
I tried all versions of SetModelID.exe I could find and none worked for me when testing Blackberry Application Suite because BAS would always say that I had an unsupported device (a BlackStone).
I don't use BAS but I did all those tests because I suspect that both products, BAS and BB Connect, use the same detection scheme.
So, if someone with an HD2 is willing to test this we would know for sure if BB Connect will work or not.
I remembers I had a lottery ticket and tried to check it, and apparently T-Mobile is blocking me from doing so.
Like if I try to go to http://www.flalottery.com/ it blocks the site.
Any way to remove the block? I saw one thing that said dial 1818 but it was from a co.uk site and I am in the US so not sure if it would work?
No way to unblock it, I might be a error, For a good year AT&T and Simple Mobile(T-Mobile) Blocked wjunction.com but now recently ive been able to access it
Check your tmo online account an make sure your web filtering is turned off
When you first get T-Mobile they have web filtering on. Log in your account and turn it off.
sent from my captivate glide running ICS (NardROM 0.4 Rooted)
Hello,,
fellow xda-ians.. does anyone know of a patched, hacked, modded APK, paid licensed etc PACKAGE DISABLER that would be able to work and run as normal without connection to the Internet for activation ? The reason is because I want to disable fooking SAMSUNG SERVICE UPDATE after I flashed it back to stock before it can connect to the Update Server. Samsung Software Update really is a piece of **** service that operate like a virus and even download data in the background without my consent and depleted my mobile data quota and automatically start to connect and check Update server the moment it detected it has Internet access.
watchman.see said:
Hello,,
fellow xda-ians.. does anyone know of a patched, hacked, modded APK, paid licensed etc PACKAGE DISABLER that would be able to work and run as normal without connection to the Internet for activation ? The reason is because I want to disable fooking SAMSUNG SERVICE UPDATE after I flashed it back to stock before it can connect to the Update Server. Samsung Software Update really is a piece of **** service that operate like a virus and even download data in the background without my consent and depleted my mobile data quota and automatically start to connect and check Update server the moment it detected it has Internet access.
Click to expand...
Click to collapse
Nobody will help you for pirated software.
Sent from my SM-G935F using Tapatalk
I have actually paid for the BK Package Disabler and has messaged the dev asking whether they can give me a version that doesnt require Internet activation. But I can respect the rules here but I find that kinda ironic.