when checking WB-AMR status its currently set to off. Does anyone know how to get into the WB-AMR SETTINGS?? i followed the international guide but we have no option 7 for WB-AMR SETTINGS
Link to OP in international http://forum.xda-developers.com/showthread.php?t=2288007
these are the directions
1. Dial *#0011#
2. Press Menu key,then Back
3. Press Menu again then Key input,Enter value 1,and wait for few seconds
4. Press Menu key,than Back
5. Press [7] DEBUG SCREEN
6. Press [7] WB-AMR SETTINGS
7. Press [1] WB-AMR ENABLE
8. Press Menu and then Back
And finaly 9. Press [6] WB-AMR Status, VIOLA, WB-AMR SETTINGS: ON and UMTS WB: ON
our problem with the att variant is that the settings stop at 5 when in debug, it was confirmed working on tmobile
ericos123 said:
when checking WB-AMR status its currently set to off. Does anyone know how to get into the WB-AMR SETTINGS?? i followed the international guide but we have no option 7 for WB-AMR SETTINGS
these are the directions
Ok so to find the setting to enable HD voice!
*#0011#
Menu> Back
Menu>KeyInput>2
Wait for menu
DON't select anything here, just do Menu>Back.
on the next menu. Select the last option DEBUG SCREEN
and here it is, you will see option 7 WB-AMR SETTINGS and in here you can enable it.
our problem with the att variant is that the settings stop at 5 when in debug, it was confirmed working on tmobile
Click to expand...
Click to collapse
Is this something that has to be carrier supported?
hamzer11 said:
Is this something that has to be carrier supported?
Click to expand...
Click to collapse
i thought the same thing i was reading up on it in the international section i will link it in this post just need to find it first!
OP updated with link
Last I had read, AT&T won't be supporting VoLTE (voice over LTE) for quite a while (another year at least). T-mobile has some variant of it, and I think Sprint delayed theirs but will have it soon. Verizon is also far out, but not as far as AT&T's
ChrisG683 said:
Last I had read, AT&T won't be supporting VoLTE (voice over LTE) for quite a while (another year at least). T-mobile has some variant of it, and I think Sprint delayed theirs but will have it soon. Verizon is also far out, but not as far as AT&T's
Click to expand...
Click to collapse
http://www.phonearena.com/news/AT-T-planning-Voice-over-LTE-launch-this-year_id42901
This year!
Sent from my SAMSUNG-SGH-I337 using xda premium
Please read forum rules before posting
Questions and help issues go in Q&A and help
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
sgh-i337
Why is my S4 SGH-I337 can not enter * # 0011 # to enter the setup menu?
When the input is "1"
The phone does not reflect
MK2 firmware
I found a video that got to the WB-AMR setting using some more funky "Key Input" of "Q" then "0000" to get to the UMTS menu.
https://www.youtube.com/watch?v=uT48bsq0sG0
But unfortunately, when you tap on the "Audio" settings, nothing happens!
Darn, so close...
I wonder if a SIM unlocked phone will enable the "AUDIO" setting?
Related
Type *#0*#
--------
http://twitter.com/vradovic
101 view and 0 comment )
did anyone test this ? I don't have phone yet. 7 days more
vrhunski said:
101 view and 0 comment )
did anyone test this ? I don't have phone yet. 7 days more
Click to expand...
Click to collapse
yes, tested, it is true. show up a testing menu.
It appears to bring up a test menu to test things like the screen and the camera.
Sent from my GT-I9000 using XDA App
hehe than my source is good
Can someone make screenshot ?
ps: There are other secret functions too ...
*#*#4636#*#* for battery and other general setttings like GSM/CDMA
*#*#8255#*#* for Gtalk service monitor
*#*#7780#*#* For factory data reset
*#*#34971539#*#* For information about phone camera (don't use the first option update camera firmware otherwise your phone camera will stop working and you'll need to take your phone to service center to reinstall
camera firmware.
*#*#7594#*#* This code can be used to change the "Power" button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.You can change this action using this code. You can enable direct power off on this button.
*#*#197328640#*#* For ....Serivice Mode....You can run various tests and change settings in the service mode.
enyoy
nice we are going in right direction
vrhunski said:
nice we are going in right direction
Click to expand...
Click to collapse
yes sir
whiskeybro said:
*#*#4636#*#* for battery and other general setttings like GSM/CDMA
*#*#8255#*#* for Gtalk service monitor
*#*#7780#*#* For factory data reset
*#*#34971539#*#* For information about phone camera (don't use the first option update camera firmware otherwise your phone camera will stop working and you'll need to take your phone to service center to reinstall
camera firmware.
*#*#7594#*#* This code can be used to change the "Power" button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.You can change this action using this code. You can enable direct power off on this button.
*#*#197328640#*#* For ....Serivice Mode....You can run various tests and change settings in the service mode.
enyoy
Click to expand...
Click to collapse
I have entered in Service Mode... Anyone knows how can I increase the speaker volume? Only to listen music, radio and videos. There is many sub-menus, and i don't know what menu choice, or that value input...
PD.: My english is too bad, i know, sorry!!!!
*#06# - imei number
Is there a webpage that lists all the available menus?
whiskeybro said:
*#*#4636#*#* for battery and other general setttings like GSM/CDMA
...
Click to expand...
Click to collapse
This may be really stupid, but I see that the phone is set to GSM/CDMA auto (PRL).
Does this mean that this thing may work with say Sprint's CDMA network, if I plug in a Sprint SIM?
I read somewhere that the radio supports both GSM and CDMA (although it doesn't mean it has an antenna for both).
I don't think so that chip is 'dual'.
(and there is no list for this options)
vrhunski said:
I don't think so that chip is 'dual'.
(and there is no list for this options)
Click to expand...
Click to collapse
Hm, when I enter the service menu as posted above, I get a whole bunch of options, some say CDMA Only, some GSM only. Mine is set at GSM/CDMA auto (PRL).
For a brief description of the menus, see this:
http://www.google.com/support/forum/p/android/thread?tid=6a327a95211ac789&hl=en
Anyway, it would be too good to be true
MacGuy2006 said:
This may be really stupid, but I see that the phone is set to GSM/CDMA auto (PRL).
Does this mean that this thing may work with say Sprint's CDMA network, if I plug in a Sprint SIM?
I read somewhere that the radio supports both GSM and CDMA (although it doesn't mean it has an antenna for both).
Click to expand...
Click to collapse
This specific menu does not work with this phone.
Hello ! What about adding this option to our phone? Thanks!
it is already possible even in stock condition
1) go to your dialer and dial *#*#4636#*#*
2) hidden menu will appear, tap Phone information
3) scroll the page down and look for preferred network type:
4) select wcdma only and you will have 3g only
miata said:
it is already possible even in stock condition
1) go to your dialer and dial *#*#4630#*#*
2) hidden menu will appear, tap Phone information
3) scroll the page down and look for preferred network type:
4) select wcdma only and you will have 3g only
Click to expand...
Click to collapse
Its good , but having this option in main menu is better , isn't it? I think if this option present in hidden menu , we may add it ti main?
Not sure how you can add it to the main menu.
But u can simplifies the above steps by using Anycut to create a shortcut to "Phone Info" so that the "3g only" setting is only 2 taps away from home screen
good luck
l *#*#4630#*#* didnt work for me
i got it to work its *#*#4636#*#*
Thanks for the correction, had a typo
Sent from my Transformer TF101 using Tapatalk
Unfortunately i live in an area that only has 2G reception unless you're with telstra but I'm not so i cant connect to 3G and test it out
I keep seeing in reviews that they get much better battery life in hspa+ mode and when they turn on lte battery suffers etc
So can we turn off lte??
jdhommert said:
I keep seeing in reviews that they get much better battery life in hspa+ mode and when they turn on lte battery suffers etc
So can we turn off lte??
Click to expand...
Click to collapse
Yes, you can.
Here's from Sean's SKYICS.
It's on Page # 3, Look for APNs just do *#2263# choose WCDMA instead of LTE, , I just tried mine and voila, :victory:
pakxelaos said:
Yes, you can.
Here's from Sean's SKYICS.
It's on Page # 3, Look for APNs just do *#2263# choose WCDMA instead of LTE, , I just tried mine and voila, :victory:
Click to expand...
Click to collapse
Doesn't work. Brings up an option that says "RAT Selection Option is restricted" I can't select anything or make any changes (it also doesn't give an option for Cellular type" looks like AT&T locked it down again.)
pakxelaos said:
Yes, you can.
Here's from Sean's SKYICS.
It's on Page # 3, Look for APNs just do *#2263# choose WCDMA instead of LTE, , I just tried mine and voila, :victory:
Click to expand...
Click to collapse
It doesn't work and even if it works upon reboot you will have LTE again
naturefreak85 said:
Doesn't work. Brings up an option that says "RAT Selection Option is restricted" I can't select anything or make any changes (it also doesn't give an option for Cellular type" looks like AT&T locked it down again.)
Click to expand...
Click to collapse
Did you take the SIM card out before you do that ? It won't work with the SIM in.
daraj said:
It doesn't work and even if it works upon reboot you will have LTE again
Click to expand...
Click to collapse
It should stay here's how.
With the SIM card remove Dial *#2263# select WCDMA, select All, then bottom left haptic button select end and reboot with the SIM card in
I mean don't do the next step (Open dialer again.Dial *#2263# select automatic)
maybe this could be a project for the devs that allow us to simply enable and disable using radio buttons or something.
anyone know if it's possible?
rwc3b said:
maybe this could be a project for the devs that allow us to simply enable and disable using radio buttons or something.
anyone know if it's possible?
Click to expand...
Click to collapse
Yes it is possible but we'll have to be patient.
Does it drain battery even if you are not in an LTE supplied area?
Originally Posted by brkaras View Post Well my friends I have found the answer...please note if you don't have ICS build on your phone I'm not sure if this will work but I am running ICS 4.0.4 UCLE2 build and this should work for all ICS builds.
1.Click on Menu button and go to Settings.
2. Go to "More....", once in, click on "Mobile Networks"
3. Go to "Access Point Names"
4. Once in you will see "AT&T PTA" with a radial button as your only option. This is the default gateway.
5. Click on Menu button below, and you will have two choices, "New APN" or "Reset to default" click on New APN.
You will see a series of lines under "Edit Access Point" and click on "APN" and enter as follows "wap.cingular"
If you like you can rename the "Name" to whatever you like...I used "AT&T HSPA+"
Click "Save"
This will give you access to HSPA+ network only. I found this info online for the Galaxy SIII with ICS coming stock. This is an ICS only option I believe, I don't recall cause I dumped the Gingerbread 2.3.6 cause it was burning up batteries like crazy.
Please be advised I have the Galaxy SII Skyrocket, they are building the LTE network in my area as we speak and I was getting all sorts of interference from their testing and upgrades so until its complete I'm running HSPA+ only and the problems went away.
Hope this helps!
Sent from my SAMSUNG-SGH-I747 using xda premium
carica42 said:
Originally Posted by brkaras View Post Well my friends I have found the answer...please note if you don't have ICS build on your phone I'm not sure if this will work but I am running ICS 4.0.4 UCLE2 build and this should work for all ICS builds.
1.Click on Menu button and go to Settings.
2. Go to "More....", once in, click on "Mobile Networks"
3. Go to "Access Point Names"
4. Once in you will see "AT&T PTA" with a radial button as your only option. This is the default gateway.
5. Click on Menu button below, and you will have two choices, "New APN" or "Reset to default" click on New APN.
You will see a series of lines under "Edit Access Point" and click on "APN" and enter as follows "wap.cingular"
If you like you can rename the "Name" to whatever you like...I used "AT&T HSPA+"
Click "Save"
This will give you access to HSPA+ network only. I found this info online for the Galaxy SIII with ICS coming stock. This is an ICS only option I believe, I don't recall cause I dumped the Gingerbread 2.3.6 cause it was burning up batteries like crazy.
Please be advised I have the Galaxy SII Skyrocket, they are building the LTE network in my area as we speak and I was getting all sorts of interference from their testing and upgrades so until its complete I'm running HSPA+ only and the problems went away.
Hope this helps!
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
That might work. But it will not turn off the LTE radio, the phone will still have LTE on but will connect to the slower internet. LTE remains on=battery drain is on.
Good afternoon.
could you tell me if there is a solution to have the choice to stay on the 3G network and not only on the 2 (2G/3G)? because when I had my gs3, I stayed more on the 3g when I chose the option 3g only. thank you.
alessa said:
Good afternoon.
could you tell me if there is a solution to have the choice to stay on the 3G network and not only on the 2 (2G/3G)? because when I had my gs3, I stayed more on the 3g when I chose the option 3g only. thank you.
Click to expand...
Click to collapse
CM 10 has this feature as a quick toggle (link to ROM dev thread: http://forum.xda-developers.com/showthread.php?t=2020859).
Sent by carrier pigeon
Go to the dialer. Type *#*#4636#*#*
Choose: Phone Information
Scroll down and change "WCDMA Preferred" to "WCDMA only"
No more 2G. Until your reboot. Then you'll have to do those steps again.
Or you can go to the dialer -> then type in *#*#4636#*#* -> then choose phone info, next, scroll down and you'll see a rectangular box that has "WCDMA Preferred". Click on that, a list of options would then appear.
2G only=GSM Only
3g only=WCDMA Only
2g + 3g=WCDMA Preferred or GSM/WCDMA (Auto)
Sent from my Nexus 4 using xda premium
thank you all for your tip, but I did not really want to install a cyanogen rom on my vanilla because rootbox suits me very well and the thing * # * # 4636 # * # * I already knew, but just the fact of power on / off connection ensures that the default setting revert ...
up
i did the idoneapps thing, and it said it was successful but my imei is still under financial obligation until april. I know that theres a *#0011# menu that gets you to a place via sub menu selections that tells you, but i have scoured the threads and cant find it. any help would be nice
youdoofus said:
i did the idoneapps thing, and it said it was successful but my imei is still under financial obligation until april. I know that theres a *#0011# menu that gets you to a place via sub menu selections that tells you, but i have scoured the threads and cant find it. any help would be nice
Click to expand...
Click to collapse
Easiest way would be to use a SIM from another carrier and see if it works.
Cryceratops said:
Easiest way would be to use a SIM from another carrier and see if it works.
Click to expand...
Click to collapse
it wont work because my IMEI has a financial obligation tied to it still
its actually this
*#0011#
hit the upper right menu button, select key input, and type a capital Q, then ok. then menu again, key input type in 4 zeros "0000" and hit ok. Menu again and hit the back selection, menu again and hit the back selection. It can take up to 30 seconds for it to give you the next menu and you may need to repeat that process, but once the menu is up, make the following selections.
[1] Protocol State
[5] Sim Information
[3] Check NV
the bottom 2 lines should read as follows
SPR BIP Unblocked
sim lock is disable