Good afternoon.
could you tell me if there is a solution to have the choice to stay on the 3G network and not only on the 2 (2G/3G)? because when I had my gs3, I stayed more on the 3g when I chose the option 3g only. thank you.
alessa said:
Good afternoon.
could you tell me if there is a solution to have the choice to stay on the 3G network and not only on the 2 (2G/3G)? because when I had my gs3, I stayed more on the 3g when I chose the option 3g only. thank you.
Click to expand...
Click to collapse
CM 10 has this feature as a quick toggle (link to ROM dev thread: http://forum.xda-developers.com/showthread.php?t=2020859).
Sent by carrier pigeon
Go to the dialer. Type *#*#4636#*#*
Choose: Phone Information
Scroll down and change "WCDMA Preferred" to "WCDMA only"
No more 2G. Until your reboot. Then you'll have to do those steps again.
Or you can go to the dialer -> then type in *#*#4636#*#* -> then choose phone info, next, scroll down and you'll see a rectangular box that has "WCDMA Preferred". Click on that, a list of options would then appear.
2G only=GSM Only
3g only=WCDMA Only
2g + 3g=WCDMA Preferred or GSM/WCDMA (Auto)
Sent from my Nexus 4 using xda premium
thank you all for your tip, but I did not really want to install a cyanogen rom on my vanilla because rootbox suits me very well and the thing * # * # 4636 # * # * I already knew, but just the fact of power on / off connection ensures that the default setting revert ...
up
Related
ok guys... I found this in another device forum related to wp7. I just got this LG Quantum yesterday so I'm learning as I go along.
I used the code ##3282# and hit dial.
This brought up some field test menu.
Don't choose anything from the menu, instead at the bottom hit the "..." and choose settings.
Then choose "Network Type", 2G. Its showing Edge for me now.
If you go back to the menu, it again shows "Automatic" but the setting seems to stick.
Report back to this thread if you see different results.
Still need to figure out:
- Persistent Wifi
- Peak / off Peak settings for Corporate Email.
vkeswani said:
ok guys... I found this in another device forum related to wp7. I just got this LG Quantum yesterday so I'm learning as I go along.
I used the code ##3282# and hit dial.
This brought up some field test menu.
Don't choose anything from the menu, instead at the bottom hit the "..." and choose settings.
Then choose "Network Type", 2G. Its showing Edge for me now.
If you go back to the menu, it again shows "Automatic" but the setting seems to stick.
Report back to this thread if you see different results.
Still need to figure out:
- Persistent Wifi
- Peak / off Peak settings for Corporate Email.
Click to expand...
Click to collapse
Nicely done. I'm on a 2G network too. Good find!
The settings stick for you? Huh.. Every time I try that no matter what I pick, auto, 2g or 3g nothing happens..
Work perfectly thanks
Works for me too, thx for it.
The only thing is, it will be reset all the time. I don't really know why. No need to restart, it is reset to default "only 3G" without doing something.
Someone who knows why?
Regards.
I would want to ask are there any apps/widgets that can place a short cut for me to toggle between 3G(HSDPA) and 2G and Auto? Basically it serve the same function as going into
Settings -> Wireless and Networks -> Mobile Network Settings -> Network mode -> Changing between WCDMA, GSM and GSM/WCDMA auto.
So far, the closest I can get to is some apps, such as extended controls, bring me to the Mobile Network Settings page, which then I would have to press Network Mode and change it from there. I have used CM7 for a brief while but reverted back to a sense rom after a month, as I prefer using some of the sense stuff. CM7 have a Network Mode toggle in the quick switch and it works exactly as I wanted it to.
But now I'm on ARHD, which like every other sense rom, doesn't have Network Settings in the quick settings menu. Hence, I am wondering if there are any apps or widgets that allow you to instantly toggle between WCDMA, GSM and GSM/WCDMA Auto. Does anyone know of such an app?
Try a search in Market.
Or use this:
http://www.appbrain.com/app/2g-3g-onoff/com.curvefish.widgets.network2g3gonoff
Hello ! What about adding this option to our phone? Thanks!
it is already possible even in stock condition
1) go to your dialer and dial *#*#4636#*#*
2) hidden menu will appear, tap Phone information
3) scroll the page down and look for preferred network type:
4) select wcdma only and you will have 3g only
miata said:
it is already possible even in stock condition
1) go to your dialer and dial *#*#4630#*#*
2) hidden menu will appear, tap Phone information
3) scroll the page down and look for preferred network type:
4) select wcdma only and you will have 3g only
Click to expand...
Click to collapse
Its good , but having this option in main menu is better , isn't it? I think if this option present in hidden menu , we may add it ti main?
Not sure how you can add it to the main menu.
But u can simplifies the above steps by using Anycut to create a shortcut to "Phone Info" so that the "3g only" setting is only 2 taps away from home screen
good luck
l *#*#4630#*#* didnt work for me
i got it to work its *#*#4636#*#*
Thanks for the correction, had a typo
Sent from my Transformer TF101 using Tapatalk
Unfortunately i live in an area that only has 2G reception unless you're with telstra but I'm not so i cant connect to 3G and test it out
I keep seeing in reviews that they get much better battery life in hspa+ mode and when they turn on lte battery suffers etc
So can we turn off lte??
jdhommert said:
I keep seeing in reviews that they get much better battery life in hspa+ mode and when they turn on lte battery suffers etc
So can we turn off lte??
Click to expand...
Click to collapse
Yes, you can.
Here's from Sean's SKYICS.
It's on Page # 3, Look for APNs just do *#2263# choose WCDMA instead of LTE, , I just tried mine and voila, :victory:
pakxelaos said:
Yes, you can.
Here's from Sean's SKYICS.
It's on Page # 3, Look for APNs just do *#2263# choose WCDMA instead of LTE, , I just tried mine and voila, :victory:
Click to expand...
Click to collapse
Doesn't work. Brings up an option that says "RAT Selection Option is restricted" I can't select anything or make any changes (it also doesn't give an option for Cellular type" looks like AT&T locked it down again.)
pakxelaos said:
Yes, you can.
Here's from Sean's SKYICS.
It's on Page # 3, Look for APNs just do *#2263# choose WCDMA instead of LTE, , I just tried mine and voila, :victory:
Click to expand...
Click to collapse
It doesn't work and even if it works upon reboot you will have LTE again
naturefreak85 said:
Doesn't work. Brings up an option that says "RAT Selection Option is restricted" I can't select anything or make any changes (it also doesn't give an option for Cellular type" looks like AT&T locked it down again.)
Click to expand...
Click to collapse
Did you take the SIM card out before you do that ? It won't work with the SIM in.
daraj said:
It doesn't work and even if it works upon reboot you will have LTE again
Click to expand...
Click to collapse
It should stay here's how.
With the SIM card remove Dial *#2263# select WCDMA, select All, then bottom left haptic button select end and reboot with the SIM card in
I mean don't do the next step (Open dialer again.Dial *#2263# select automatic)
maybe this could be a project for the devs that allow us to simply enable and disable using radio buttons or something.
anyone know if it's possible?
rwc3b said:
maybe this could be a project for the devs that allow us to simply enable and disable using radio buttons or something.
anyone know if it's possible?
Click to expand...
Click to collapse
Yes it is possible but we'll have to be patient.
Does it drain battery even if you are not in an LTE supplied area?
Originally Posted by brkaras View Post Well my friends I have found the answer...please note if you don't have ICS build on your phone I'm not sure if this will work but I am running ICS 4.0.4 UCLE2 build and this should work for all ICS builds.
1.Click on Menu button and go to Settings.
2. Go to "More....", once in, click on "Mobile Networks"
3. Go to "Access Point Names"
4. Once in you will see "AT&T PTA" with a radial button as your only option. This is the default gateway.
5. Click on Menu button below, and you will have two choices, "New APN" or "Reset to default" click on New APN.
You will see a series of lines under "Edit Access Point" and click on "APN" and enter as follows "wap.cingular"
If you like you can rename the "Name" to whatever you like...I used "AT&T HSPA+"
Click "Save"
This will give you access to HSPA+ network only. I found this info online for the Galaxy SIII with ICS coming stock. This is an ICS only option I believe, I don't recall cause I dumped the Gingerbread 2.3.6 cause it was burning up batteries like crazy.
Please be advised I have the Galaxy SII Skyrocket, they are building the LTE network in my area as we speak and I was getting all sorts of interference from their testing and upgrades so until its complete I'm running HSPA+ only and the problems went away.
Hope this helps!
Sent from my SAMSUNG-SGH-I747 using xda premium
carica42 said:
Originally Posted by brkaras View Post Well my friends I have found the answer...please note if you don't have ICS build on your phone I'm not sure if this will work but I am running ICS 4.0.4 UCLE2 build and this should work for all ICS builds.
1.Click on Menu button and go to Settings.
2. Go to "More....", once in, click on "Mobile Networks"
3. Go to "Access Point Names"
4. Once in you will see "AT&T PTA" with a radial button as your only option. This is the default gateway.
5. Click on Menu button below, and you will have two choices, "New APN" or "Reset to default" click on New APN.
You will see a series of lines under "Edit Access Point" and click on "APN" and enter as follows "wap.cingular"
If you like you can rename the "Name" to whatever you like...I used "AT&T HSPA+"
Click "Save"
This will give you access to HSPA+ network only. I found this info online for the Galaxy SIII with ICS coming stock. This is an ICS only option I believe, I don't recall cause I dumped the Gingerbread 2.3.6 cause it was burning up batteries like crazy.
Please be advised I have the Galaxy SII Skyrocket, they are building the LTE network in my area as we speak and I was getting all sorts of interference from their testing and upgrades so until its complete I'm running HSPA+ only and the problems went away.
Hope this helps!
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
That might work. But it will not turn off the LTE radio, the phone will still have LTE on but will connect to the slower internet. LTE remains on=battery drain is on.
Hi everyone,
Obviously, I know where to find the setting that allows you to switch between LTE/GSM/WCDMA to, say, just WCDMA. But is there a tool that would allow me to switch that mode from a widget or quick setting tile? My commute features varying degrees of network congestion on LTE, so I like to switch back and forth. I'd just like for that process to be something I could do more quickly.
Any ideas?
Thanks!
I don't think so as far as I know. Best option I've found is keep the code in a text file and copy paste into the dialer and change from there.
ocelot4ark said:
Hi everyone,
Obviously, I know where to find the setting that allows you to switch between LTE/GSM/WCDMA to, say, just WCDMA. But is there a tool that would allow me to switch that mode from a widget or quick setting tile? My commute features varying degrees of network congestion on LTE, so I like to switch back and forth. I'd just like for that process to be something I could do more quickly.
Any ideas?
Thanks!
Click to expand...
Click to collapse
On the pull down shade there is a data toggle. Press and hold to go directly to that setting screen.
Sent from my LG-H918 using Tapatalk
beast330001 said:
On the pull down shade there is a data toggle. Press and hold to go directly to that setting screen.
Click to expand...
Click to collapse
Hurmm..not appear on my F800L for that.. Can u make a screen shot?
maelxiv said:
Hurmm..not appear on my F800L for that.. Can u make a screen shot?
Click to expand...
Click to collapse
View attachment 4076078
Sent from my LG-H918 using Tapatalk
Thank.. But this is appeared.. No toggle in everywhere
5457#*800# sroll down to end and it have a network mode. After select phone will restart
277634#*#
RAT selection
LTE/WCDMA
You saved my v20
v.m.quang said:
5457#*800# sroll down to end and it have a network mode. After select phone will restart
Click to expand...
Click to collapse
I had no idea how to select network mode, thanks to your working code I was able to select gsm only network and save my old non LTE supported sim card from randomly searching for signals on a lte supported network and draining my battery like hell!
THANK YOU for your working code :good: