Related
I guess I missed this over the weekend and I am looking for the original install that I dont need to have root for. I have been reading over the threads here and in the Dev forum and I am not seeing any links to the download for Non-Root users.
I am to much of a ***** to root my phone. i spent way to much cash on it and i am too worried something will go wrong.
So here is want I am asing for
A. The original non root install with instructions on how to do it
or
B. Someone to help walk me through the process of rooting and getting FroYo 2.2 set up on my phone.
Please shoot me a PM if your willing to help out. I am just way to worried if I do this without someone who knows what they are doing I am going to screw up my phone, and my wife would never let me buy another one ...lol
Can somsone help out a fellow Dev, thanks
Sorry I can't post links but here you go
androidandme.com/2010/05/news/how-to-manually-install-android-2-2-on-your-nexus-one/
Ya just found it buried in a thread
Thanks
See if I would have spent another 10 minutes searching I would have found it without having to ask ...lol
Got to remember to scan threads for 30 minutes not 20 before asking ...lol
Or use this: http://forum.xda-developers.com/showthread.php?p=6043779#post6043779
(Or the Root/2.2 links in my sig.)
Okay, I'll give you the general idea, as I understand it:
The FRF50 ROM that was leaked from Google is exclusively for ERE27 Builds only. Unless that is the native build on your phone, you will not be able to apply that as is.
Paul O'Brien, over at Modaco, repacked it so that it can be flashed with any current ROMs. Though he's said that there are no conditions, there in fact are a few stipulations to be aware of.
-If you have never unlocked your bootloader, you won't be able to flash anything at all. Something to think about. There's a few threads here dedicated to this topic alone. It voids your warranty so that is why some people are holding off and waiting for the official OTA update to be released.
-Though it's true that you don't have to be rooted to flash Paul's repack, unless you have ERE27 stock, you need to flash using one of the custom recovery images. And in order to flash your recovery.img, you need to be rooted. So you need to have had rooted before.
So the steps, from stock, would be:
(1) Unlock your bootloader, via flashboot.
(2) Flash superuser to your boot.img (aka rooting)
(3) Flash a custom recovery to recovery.img (I use RA)
(4) Flash Paul's FRF50 repack using said recovery image.
I'm sorry I can't post the links to the relavant posts, but my status as a member doesn't allow me to. Hope this helped clear some things up for you.
Paul22000 said:
Or use this: http://forum.xda-developers.com/showthread.php?p=6043779#post6043779
(Or the Root/2.2 links in my sig.)
Click to expand...
Click to collapse
Paul, is that Avatar a picture of YOU?
OMG theres a search feature!!!
Really OMG I didnt know this!
I guess me saying I searched threads and the site for 20 minutes was something you missed.
But thanks to all who actually decided to help and not be another one of these "USE SEARCH" people.
I respect the work you do for us here Paul, but come on man. Read before making a post like that ....lol
attn1 said:
Paul, is that Avatar a picture of YOU?
Click to expand...
Click to collapse
All I wil say is:
λ
LOL ...........
you don't need to root to install froyo and you don't need to hook up your nexus to a pc. my method is pretty simple and it works.
edit: I shouldn't say it's my method. Its actully a backdoor to installing froyo.
theletterj said:
Okay, I'll give you the general idea, as I understand it:
The FRF50 ROM that was leaked from Google is exclusively for ERE27 Builds only. Unless that is the native build on your phone, you will not be able to apply that as is.
Paul O'Brien, over at Modaco, repacked it so that it can be flashed with any current ROMs. Though he's said that there are no conditions, there in fact are a few stipulations to be aware of.
-If you have never unlocked your bootloader, you won't be able to flash anything at all. Something to think about. There's a few threads here dedicated to this topic alone. It voids your warranty so that is why some people are holding off and waiting for the official OTA update to be released.
-Though it's true that you don't have to be rooted to flash Paul's repack, unless you have ERE27 stock, you need to flash using one of the custom recovery images. And in order to flash your recovery.img, you need to be rooted. So you need to have had rooted before.
So the steps, from stock, would be:
(1) Unlock your bootloader, via flashboot.
(2) Flash superuser to your boot.img (aka rooting)
(3) Flash a custom recovery to recovery.img (I use RA)
(4) Flash Paul's FRF50 repack using said recovery image.
I'm sorry I can't post the links to the relavant posts, but my status as a member doesn't allow me to. Hope this helped clear some things up for you.
Click to expand...
Click to collapse
Okay, there's a lot of good info out there mixed in with a lot of mis-information.
Your steps will work BUT:
I prefer to do it this way:
Unlock the boot loader via fastboot
Flash Amon_RA 170 recovery for Nexus One
Do a nandroid Backup
Flash your ROM of choice (Modaco's FROYO in this case)
If you are running stock recovery, you CAN flash, but only Google's updates. If you have a T-mobile N1 this may work for you without unlocking the bootloader by flashing the Google Froyo Release with the stock recovery:
Google Froyo Release
You must be on release ERE27 for this to work.
Here's a link to some instructions on how to use the stock recovery program:
jp_macaroni's thread
I suspect that since most people have already rooted or cannot get to ERE27, Paul's guide is the best way to go for them.
If you are running a custom recovery, you can flash custom updates, but NOT Google's updates intended for any stock phone/firmware level.
You don't need to root (root access) to the current ROM before flashing a custom ROM. You only need to unlock the bootloader and install a custom recovery image.
jcohenlv said:
OMG theres a search feature!!!
Really OMG I didnt know this!
I guess me saying I searched threads and the site for 20 minutes was something you missed.
But thanks to all who actually decided to help and not be another one of these "USE SEARCH" people.
I respect the work you do for us here Paul, but come on man. Read before making a post like that ....lol
Click to expand...
Click to collapse
Yeah you know, everyone is new once. It's easy to sort out the tripe from the real deal when you've been around the block once or twice. Paul is doing his best to be helpful and not cause more confusion.
The problem isn't that people can't search so much as it is that searches yield too much conflicting information, so lets not jump down people's throats when they ask for a point of clarification. Instead, lets start asking moderators to sticky good info and pulling redundant/bad info so that searches are more meaningful. The number of new threads in here because of the Froyo release is mind numbingly high. Let's all try to exercise some patience.
attn1 said:
Okay, there's a lot of good info out there mixed in with a lot of mis-information.
Your steps will work BUT:
I prefer to do it this way:
Unlock the boot loader via fastboot
Flash Amon_RA 170 recovery for Nexus One
Do a Nadroid Backup
Flash your ROM of choice (Modaco's FROYO in this case)
If you are running stock recovery, you CAN flash, but only Google's updates. If you have a T-mobile N1 this may work for you without unlocking the bootloader:
If you are running a custom recovery, you can flash custom updates, but NOT Google's updates intended for any stock phone/firmware level.
You don't need to root (root access) to the current ROM before flashing a custom ROM. You only need to unlock the bootloader and install a custom recovery image.
Click to expand...
Click to collapse
I'm not disagreeing with you, but as far as I know, yes, you do have to root in order to flash Amon_RA Recovery to your phone. If that's not correct, I apologize for spreading misinformation.
theletterj said:
I'm not disagreeing with you, but as far as I know, yes, you do have to root in order to flash Amon_RA Recovery to your phone. If that's not correct, I apologize for spreading misinformation.
Click to expand...
Click to collapse
You only need to unlock the bootloader. You do not need root.
Unlocking the boot loader allows installation of an alternate recovery, which allows you to install custom software to the existing ROM or to install a custom ROM. It's updating the ROM that allows you to gain root access, not unlocking the boot loader. It goes in this order:
> Unlock boot loader (void warranty - still not rooted)
> Install custom recovery
> nandroid backup (recommended/optional)
> Update ROM (for root access - or not)
The original instructions worked perfect
All that was needed was to change the name to update.zip load it on the root of the SD card then but the phone in bootloader and load recovery from SD.
Took about 5 minutes.
Once the phone came up it did a few things and took about another 5 minutes to chill on the processes then I was able to use the phone without any problems.
So for those interested here are the exact steps:
This is for NON Rooted T-Mobile Version!!!!
To manually install Android 2.2 on the Nexus One, perform the following steps:
1. Download the official Android 2.2 firmware for the Nexus One.
2. Copy the file to your microSD card and name it update.zip (newb warning: not update.zip.zip)
3. Power off your phone.
4. Hold down the VOLUME DOWN button and power it back on.
5. The phone will now search for files like PB00IMG.zip, etc. This is normal. Scroll down to recovery (using Volume Down Key) and press the POWER button.
6. When you see the “/!\” symbol, press the POWER button and the Volume Up button at the same time. You should be presented with a menu and one of the options should be “Apply sdcard:update.zip”.
7. Use the trackball to navigate to “apply sdcard:update.zip” and select it.
8. When you see “Install from sdcard complete”, select “reboot system now”.
Wait 5 minutes, phone will reboot once rebooted let the phone sit for about 5 minutes then you are good to go. It couldn't be any easier
I bought my Samsung Nexus S from a Koodo booth here in Canada two days ago and have been enjoying it quite a lot since. I've also been reading up on the wealth of information pertaining to rooting it and trying to sort out so many different factors. I notice I'll have to use the search feature to find one little triviality that comes along and the fix it.
Then I decided to just make my own thread where I'll post every step of the ways I find and how I figure out how to solve my issues involved with rooting my phone.
To start, I found out you can create a backup with NANdroid.
I couldn't find any information on where to download this elusive "NANdroid" and then heard from This thread that all I have to do is
kenvan19 said:
Now lets get started. First, how does one install mods on Android? Lets do a NANDroid backup to begin:
1) Turn your phone off.
2) While holding the Volume Up button press the power button until the screen turns on and you will see a black screen with an Android on it and a lot of numbers and words that will mean nothing to you. This is called the Bootloader. In both the bootloader and the recovery mod you will use the volume buttons to navigate between options and the power button to select one.
3) Navigate down to Recovery option and select it.
4) Navigate down to backup and restore
5) Navigate down to backup and select it and let it run.
Click to expand...
Click to collapse
This didn't seem to be the case when I followed these steps; coming first to the predicted screen,
(containing this information)
Code:
FASTBOOT MODE
HW VERSION - REV 16
BOOTLOADER VERSION - I9020XXKA3
BASEBAND VERSION - I9020UCKB2
CARRIER INFO - ATT (but im with Koodo?)
SERIAL NUMBER - Lots of digits.
LOCK STATE - LOCKED
Also giving me the option to select between
Reboot Bootloader
Reboot
Recovery
Power Off
When going into recovery mode I'm greeted with an animation of a box with an arrow coming out of it. This turns into a triangle with a exclamation in the middle of it.
From here I press power and volume up to come to a menu that is supposed to have a NANdroid option I've been told.
Instead; I get the options:
Reboot system now
Apply update from /sdcard
wipe data/factory reset
wipe cache partition
At this point I'm currently stumped, though I'll continue searching as I'd rather not be stuck without a backup before starting the rooting process.
UPDATE: Even though I'm weary of proceeding without backing up, I'm sure I'll be able to restore my phone back to factory somehow.
I spent the night downloading and installing the Android SDK, then started configuring my device for use on windows 7.
Currently I'm in the bootloader interface after installing my phone's device drivers while being in fastboot mode.
The drivers take a couple of minutes, but they install successfully!
On I go, I'll just point DOS to the directory I want it to. Now I'll run the program through dos. What's this?! AND ERROR!?
Psht, I WOULD be missing the "AdbWinApi.dll" Not a hard thing to fix. I'll just google for the file!
Oh! I don't even have to download the file, the directory has just changed!
That was an easy problem to solve with many solutions provided!
Time to try again!
Sweet, it works. WHOA! TEXT ON MY ANDROID WHAT ARE YOU DOING!
And I select Yes to come to a nice screen that says my phone is now unlocked!
Now I need to download an image file? Okay. I can do this.
Okay, flash recovery the flashboot. Looks like the image has updated since the thread's instructions. Hopefully it's still compatible.
Now I just need to root. Just need to install a nice zip file.
AAAND, I can't seem to push it onto my phone for some reason. Time to search.
Oh, I can just copy and paste this file by enabling USB storage and dragging it over.
I'll just follow the rest of the steps, to no errors! Whoo! I'm free to install any ROM I want!
You'll need a custom recovery for nandroid, but first you will need to root. There's guides in the nexus s general section on doing that.
I kind of like this post.
Sent from my Nexus S using XDA Premium App
apreichner said:
You'll need a custom recovery for nandroid, but first you will need to root. There's guides in the nexus s general section on doing that.
I kind of like this post.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
I just read through Kursk's guide for rooting the i9020a and i9023 and noticed I have no ability to backup my android in the case something goes wrong.
Am I missing something, or do I have to root before having the privilege of backing up my phone's current ROM.
edit: Got sidetracked by a thread in the Chef's forum and learned that Java is the language for App development for Androids. Been reading about the Android OS and how it works for the past couple of hours. Brains bursting. xd
http://forum.xda-developers.com/showthread.php?t=895545
^ Has pretty much all you need to know for installing a custom recovery and rooting your phone.
It's only once you've installed ClockWorkRecovery Mod that you'll be able to easily make backups.
I have updated this guide as I have a new replacement from t-mobile. This guide was based on my previous atrix which was running froyo (2.2.2) This time I have applied OTA 45.21.2.Mb860.T-mobile.en.gb and everything works perfect so if you have updated your phone to 2.3.4 then you can use this guide as well
I have decided to create this thread as I have seen many people confused about the difference between At&t phones and their UK ones. This thread will help you make the decision whether you want to hack your phone or not. I own T-mobile UK Atrix and whatever I have done worked perfectly for me. I’m not responsible for any bricks. You doing this on your own risk – good news is that no one (UK) had their mobile bricked. ALL CREDITS GOES TO DEVELOPERS AND OTHERS THAT CREATED SIMILAR THREATS – THANKS
ROOTING – If you running froyo (2.2.2) I have used gingerbreak method which is very easy:
Code:
1. Download Gingerbreak.exe from here: [url]http://api.viglink.com/api/click?format=go&drKey=1359&loc=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1046626&v=1&libid=1311795059566&out=http%3A%2F%2Fbandbinnovations.com%2Fxda%2FGingerBreak.exe&ref=http%3A%2F%2Fforum.xda-developers.com%2Fforumdisplay.php%3Ff%3D997%26order%3Ddesc%26page%3D4&title=%5BHOWTO%5D%20Easy%20Root%201.5.7%20%26%201.83%20using%20GingerBreak%20-%20xda-developers&txt=http%3A%2F%2Fbandbinnovations.com%2Fxda%2FGingerBreak.exe[/url]
2. Make sure you have got debugging mode ON(settingsApplications Development) and you have installed drivers for your atrix
3. Run Gingerbreak.exe on your pc
4. In your phone you will find new app called gingerbreak – run it and select root. Mobile will reboot itself once is done.
5. Congratulation you are rooted.
NOTICE: You need to have External SD Card and also be aware that rooting this way will format your internal storage.
ROOTING – If you running gingerbread (2.3.4) use superoneclick (http://forum.xda-developers.com/showthread.php?t=803682) and fallow the instructions on the original thread. Very easy way.
If you want to try ANY Custom ROM you need to Unlock your Bootloader:
Code:
1. You need to download and install RDS lite on your PC: [url]http://forum.xda-developers.com/attachment.php?attachmentid=634879&d=1308872277[/url]
2. Download and extract IHOP_Bell.rar: [url]http://diamantephoto.com/IHOP_Bell.rar[/url]
3. Download and extract Fastboot tools [url]http://gititbit.ch/FAST[/url]
4. Power down your Motorola Atrix
5. Take out your microSD card and SIM card for the flashing process
6. While turning the phone on, hold the Volume Up button until it acknowledges RSD
7. Your device will say “Starting RSD protocol support”
8. Run “RSD Lite” on your computer
9. Press the “. . .” button next to the box labeled “Filename”
10. Load up the SBF file – IHOP_Bell.sbf
11. Plug your device into your computer
12. RSD Lite should recognize your device and say “Model: NS Flash Olympus” and “Connected…”
13. Press the “Start” button
14. Be patient while the phone reboots. It will take a long time.
15. Open and extract the Fastboot package from above
16. Open a command prompt window
a. On Windows, press Start and type “cmd” then press the enter button
17. Type the following command. Your directory will be the folder where you extracted the Fastboot package.
(Example: cd C:\Users\Kenneth\Desktop\fastboot-package)
a. cd your directory here
18. Power down your Atrix device
19. Hold the power button and the downward volume button until you see “Fastboot”
20. Let go of the buttons and press the upward volume button once
21. You will now see “Starting Fastboot protocol support”
22. Plug your device into a USB port in the back slot of your computer
a. Front slots sometimes do not have enough power to stay connected to the device.
23. Type the following command:
a. fastboot oem unlock
24. You will now receive a warning along with a unique device ID
25. Type the following commands using your unique device ID in place of the ####:
a. fastboot oem unlock ####
b. fastboot reboot
26. Wait for your device to reboot. Congratulations! You now have an unlocked bootloader!
I recommend to install romracer's Recovery : http://forum.xda-developers.com/showthread.php?t=1204500.
Instalation:
Code:
$ fastboot devices
TA20700KXH fastboot
$ fastboot erase recovery
erasing 'recovery'... OKAY [ 0.741s]
$ fastboot flash recovery recovery.img
sending 'recovery' (4780 KB)... OKAY [ 0.490s]
writing 'recovery'... OKAY [ 0.544s]
The reason I recommend this recovery is because the official clockwork recovery doesn't support external sdcard (bug?). If this doesn't bother you then you can download Rom manager from market and install official recovery.
Most of the roms have unified kernel which means you don't need to apply anything after installation. This includes roms like aura, the dark side, cyanogen mod.
However if you do have issues with memory then download kernel from this thread: http://forum.xda-developers.com/showthread.php?t=1156040
Thanks for this - thats my night sorted
Very useful and thorough guide. Thanks a lot Mr Foka. I left you a "thanks" btw.
thank you so much! just going to unlock my orange atrix
Sent from my MB860 using XDA Premium App
Jibraldor said:
Very useful and thorough guide. Thanks a lot Mr Foka. I left you a "thanks" btw.
Click to expand...
Click to collapse
That's very kind. Thanks
Hi there,
sorry, a quick question regards to the custom ROMS, you mentioned if I am going to apply the AT&T ROMs, I need to apply custom kernels,
Foka002 said:
You can now install ANY Custom ROM. However if you want to install ROM That is designed for AT&T you will have to apply FIXED Kernel for international (faux’s or eveal kernels working excellent for our devices - http://forum.xda-developers.com/showthread.php?t=1169409 or http://forum.xda-developers.com/showthread.php?t=1156040)
Click to expand...
Click to collapse
but in eval-'s thread, he mentioned:
I suspect these boot.img will 'fix' RAM for unlocked internationals on any Gingerbread 2.3.x build (only), but this as faux123 helpfully points out, your modules must match (important for wifi, vpn) ! So for now, these boot.img with quick & dirty RAM fix are only for this Orange FR 2.3.4 system.img!! (Unless you want to copy around dhd.ko and parts of /system/lib/hw between /systems...)
Click to expand...
Click to collapse
So can I just apply his kernel on the AT&T firmware?
Cheers,
Well I tried eval kernel few times and long time ago. For every rom I had it I used faux kernel so it's safer to use it with recent roms.
Sent from Motorola Atrix
Hi thanks for the time and effort but I was hoping someone could help me.Trying to follow the guide but having trouble with two parts.Firstly when running pudding through rsd how long exactly do you leave it?It says to leave it at android lockscreen but rsd dhows as not finished like 38% rebooting at this time/Also when to connect or disconnect is confusing as I read a guide previously to yours am not sure if phone gets disconnected after rsd?Lastly and I think my most serious problem is that I cant get the fastboot command to work.It will either say unable to find the path specified or no command on internal or external etc.Any ideas?Thanks
Great guide! Thanks for putting this together.
So correct me if im wrong but I can follow this guide, and put on gingerbread on my orange ATRIX and it will work fine?!?!?!?
Also once the official update hits UK can I just install that?
Great work btw
Sent from my MB860 using XDA App
Just to ask / add
There is going to be an official Orange OTA update isnt there? I could do it this way but for a change want to try it the offical way
scotty7910 said:
Hi thanks for the time and effort but I was hoping someone could help me.Trying to follow the guide but having trouble with two parts.Firstly when running pudding through rsd how long exactly do you leave it?It says to leave it at android lockscreen but rsd dhows as not finished like 38% rebooting at this time/Also when to connect or disconnect is confusing as I read a guide previously to yours am not sure if phone gets disconnected after rsd?Lastly and I think my most serious problem is that I cant get the fastboot command to work.It will either say unable to find the path specified or no command on internal or external etc.Any ideas?Thanks
Click to expand...
Click to collapse
In order to use fastboot you need to have motorola drivers installed. Im not sure about eds but if your device is recognised then it is fine. Im not sure about waiting time in rsd but if you did fallow this guide step by step you shouldn't have any problems.
Roberts56
Yes you will be able to flash gingerbread but you won't be able to use official OTA unless you downgrade to 2.2.2 using fruitcake method. The thing is if you want to play with custom roms then there is no point in waiting for official release because its not going to be any better than any rom we've got now. Just keep in mind once you unlock your bootloader you will lose warranty.
Uk OTA is coming for sure but I have no idea when. Rumours says in sep/oct
Boot screen
Hi
After flashing IHOP_BELL, everytime I reboot I get a menu instead of Motorola Logo at beginning. Is that normal?? When I leave it there it will boot Android and will show the Motorola Logo.
It looks like this:
http://2.bp.blogspot.com/-dPOywn12xbg/Th6albF5xPI/AAAAAAAAAGw/BStIYOa7B_A/s1600/11.JPG
Thanks for your help
R3wt3d said:
Hi
After flashing IHOP_BELL, everytime I reboot I get a menu instead of Motorola Logo at beginning. Is that normal?? When I leave it there it will boot Android and will show the Motorola Logo.
It looks like this:
http://2.bp.blogspot.com/-dPOywn12xbg/Th6albF5xPI/AAAAAAAAAGw/BStIYOa7B_A/s1600/11.JPG
Thanks for your help
Click to expand...
Click to collapse
Strange...I've never seen this before. Can anyone tell why is that ?
hmm it's not normal then?
Any idea if I could overwrite with IHOP_BELL again downloaded freshly from xda?
I downloaded it from here.
http://diamantephoto.com/IHOP_Bell.rar
thanks
R3wt3d said:
hmm it's not normal then?
Any idea if I could overwrite with IHOP_BELL again downloaded freshly from xda?
I downloaded it from here.
http://diamantephoto.com/IHOP_Bell.rar
thanks
Click to expand...
Click to collapse
Notice of on your photo it says that your phone is unlocked! Is that right?
Did you flash a recovery? Romracer's I hear is good at the moment.
Then did you flash a rom? As says no OS DETECTED!
Can recommend http://forum.xda-developers.com/showthread.php?t=1169409
But you can use fruitcake s
Swyped from "Mount" Olympus
nitrox1 said:
Notice of on your photo it says that your phone is unlocked! Is that right?
Did you flash a recovery? Romracer's I hear is good at the moment.
Then did you flash a rom? As says no OS DETECTED!
Can recommend http://forum.xda-developers.com/showthread.php?t=1169409
But you can use fruitcake s
Swyped from "Mount" Olympus
Click to expand...
Click to collapse
yeah it's unlocked. and after that menu I flashed ORFR boot system webtop
U guys never seen that menu? I got it right after flashing sbf...well during sbf flashing.
R3wt3d said:
yeah it's unlocked. and after that menu I flashed ORFR boot system webtop
U guys never seen that menu? I got it right after flashing sbf...well during sbf flashing.
Click to expand...
Click to collapse
Did you flash the rom with it too, as webtop is a separate part?
Never seen that menu, but never tried to boot just after ihop either though, as has no rom as party of it, check out size of the file, and size of a normal sbf.
Swyped from "Mount" Olympus
I think this is soft brick...Is this UK atrix ??
Noob questions
Do I need to root before I flash this ROM? Because I don't have an SD card I'm a bit confused if I can do this or not. Once flashed to Orange France 2.3.4, if the OTA comes through what should I do? Accept? Decline? I'm very doubtful that Motocrap will update us to ICS, so can we update to ICS manually if I flash right now? Finally, if I do Brick, what can I do? I don't have insurance. Can I backup to a PC? I want something that no matter what happens I can restore to. Thanks for the answers ( if I get any )
Kartik
HellllOOooOoOo!!
Ok, here goes. First off, I searched. A lot. There is so much conflicting information and opinions out there. I hate to annoy you pros with noob-ness but I have to. Sorry!
Here is the quick version:
Friend gave me an Atrix 4G. He is big on experimenting, rooting, custom ROMs and all that. I am not. At all. I want to use it on t-mobile. I DO get a signal and can text. MMS doesn't work and motoblur wont let me set up an account. This results in no access to email other then Gmail. Basically, I want to bring the phone back to its original (or close as possible) state. Hopefully, that will solve some of my issues.
-Android Version
2.3.4
-Unlocked
-Rooted
-Build Number
olympus_hktw-userdebug 2.3.4 4.5.2A-5_OLH-3110614 test-keys
-Clockwork recovery mod installed (if that matters)
I am not THAT tech savvy but can follow instructions well. I've already been messing around but cant seem to get RSD Lite to actually flash properly. I dont care for customs ROMS, hacking and tinkering. I just want this phone to work as well as possible.
Can anyone give me some personal assistance? Please? Step by step would be great. I'll be refreshing this page often in hopes of responses.
Vul said:
HellllOOooOoOo!!
Ok, here goes. First off, I searched. A lot. There is so much conflicting information and opinions out there. I hate to annoy you pros with noob-ness but I have to. Sorry!
Here is the quick version:
Friend gave me an Atrix 4G. He is big on experimenting, rooting, custom ROMs and all that. I am not. At all. I want to use it on t-mobile. I DO get a signal and can text. MMS doesn't work and motoblur wont let me set up an account. This results in no access to email other then Gmail. Basically, I want to bring the phone back to its original (or close as possible) state. Hopefully, that will solve some of my issues.
-Android Version
2.3.4
-Unlocked
-Rooted
-Build Number
olympus_hktw-userdebug 2.3.4 4.5.2A-5_OLH-3110614 test-keys
-Clockwork recovery mod installed (if that matters)
I am not THAT tech savvy but can follow instructions well. I've already been messing around but cant seem to get RSD Lite to actually flash properly. I dont care for customs ROMS, hacking and tinkering. I just want this phone to work as well as possible.
Can anyone give me some personal assistance? Please? Step by step would be great. I'll be refreshing this page often in hopes of responses.
Click to expand...
Click to collapse
It sounds like you need to set up a proper T-Mobile APN. (you have a T-Mobile SIM card currently installed?)
If you can get on Wifi, try to go the the Play store and download Tweakker or other APN utilities that enter the APN for your based on your carrier.
co.ag.2005 said:
It sounds like you need to set up a proper T-Mobile APN. (you have a T-Mobile SIM card currently installed?)
Click to expand...
Click to collapse
Yes. I have a t-mobile SIM card installed. My concern is what the previous owner may have done and whatever ROM is loaded on this phone. Can I somehow bring it back to stock or get a super stable, close to stock as possible ROM first and then start addressing the quirks I have?
Is this an AT&T branded phone? I'm not sure if getting back to stock is necessary, and if you do get back to stock, you might be SIM locked to AT&T (I could be wrong however). If you want to flash a fresh, stock ROM but still be rooted, SIM unlocked, etc., find a 2.3.6 Fruitcake in this forum or try NottachTrix 4G ROM.
however, I'd wait till others weighed in before doing anything. Honestly, I'd try getting your APN (download Tweakker app and walk through the steps) going now and if that solves your issue, your ROM might be working fine for you... my $0.02
oh, and welcome to XDA!
Vul said:
Yes. I have a t-mobile SIM card installed. My concern is what the previous owner may have done and whatever ROM is loaded on this phone. Can I somehow bring it back to stock or get a super stable, close to stock as possible ROM first and then start addressing the quirks I have?
Click to expand...
Click to collapse
1. Download the fruitcake .zip you want (webtop also, if you want it)
2. Do a full wipe with fastboot (search if you're unsure how to)
3. Boot into recovery and flash the .zip you downloaded from step 1
4. Reboot and you're done
This will put you back to stock. I can't remember if fruitcakes are pre-rooted, but if not you can easily root again.
Alright, now we're getting somewhere.
co.ag
The phone itself says "unlocked" upon startup. I got the network unlock code direct from AT&T because at first the phone wouldn't even recognize my t-mo SIM. Phone is now network unlocked.
Ghost
gonna search now for fruitcake and see what thats all about. Do I need webtop?
Then going to get fastboot. Guess I dont need RSD Lite anymore?
Im doing this because I dont know what the previous owner has done and would like a clean slate. Kind of like changing the oil on a used car you buy, even if the PO says it was done.
Ok so,
I found fastboot with recovery tool and the .exe files within the ZIP dont do anything.
The fruitcake ZIP file I downloaded according to your link, I'm not sure what to do with that. lol
Help?
**am I supposed to be saving these files to the phone itself? If so, where? Internal storage? SD card?
Vul said:
Alright, now we're getting somewhere.
co.ag
The phone itself says "unlocked" upon startup. I got the network unlock code direct from AT&T because at first the phone wouldn't even recognize my t-mo SIM. Phone is now network unlocked.
Ghost
gonna search now for fruitcake and see what thats all about. Do I need webtop?
Then going to get fastboot. Guess I dont need RSD Lite anymore?
Im doing this because I dont know what the previous owner has done and would like a clean slate. Kind of like changing the oil on a used car you buy, even if the PO says it was done.
Click to expand...
Click to collapse
that "unlocked" bit on start up means your bootloader is unlocked, doesn't have anything to do with the SIM card. All this means is that you can flash a ROM since the phone is "unlocked"
Vul said:
Ok so,
I found fastboot with recovery tool and the .exe files within the ZIP dont do anything.
The fruitcake ZIP file I downloaded according to your link, I'm not sure what to do with that. lol
Help?
**am I supposed to be saving these files to the phone itself? If so, where? Internal storage? SD card?
Click to expand...
Click to collapse
the fruitcake .zip goes on your internal sdcard. BUT, before you start doing anything, please go through the stickied threads in this section and read up on how to flash ROMs to your phone. This will include how to wipe your phone using the fastboot commands and how to flash the fruitcake .zip.
start here, read this post
http://forum.xda-developers.com/showthread.php?t=1154600
then follow guides to
"HOW TO INSTALL FRUITCAKES ON 2.3.4 (GREAT SBF/RSD ALTERNATIVE!!!)"
and
"ROMs & Kernels:
FYI:
Before installing any ROM or Kernel I suggest you do the following to help prevent error, boot-loops, etc. Also, it's a good idea to flash a new ROM or Kernel on a fully charged device:
1) Download which ever ROM or Kernel you plan on flashing and have the .zip on your device ready to flash.
2) Backup your apps (not system data), contacts, etc. Also consider making a CWM backup of your device, just in case.
3) Boot into CWM Recovery
4) Wipe Dalvik Cache (under advanced in CWM)
5) Wipe Cache Partition
6) Wipe data/factory reset
6a) If you're using ROM Manager/CWM you will need to reboot the device after step 5, and upon reboot enter fastboot mode and enter the command: "fastboot -w" or "moto-fastboot -w" if you prefer using moto-fastboot. Then type "fastboot reboot" and upon reboot make sure to enter Android Recovery again, so that you can flash the ROM/Kernel.
7) Install .zip from SD Card (choose the .zip you wish to install)
8) If you installing a radio, theme, kernel, etc. on top of a ROM, I would suggest redoing the whole wipe process again between flashes.
9) Reboot the Device
- If you get a boot loop, try entering Android recovery and re-wiping the chace and data, and perhaps try reflashing the ROM/Kernel. Or if you made a CWM backup, you can always restore that."
Vul said:
Ok so,
I found fastboot with recovery tool and the .exe files within the ZIP dont do anything.
The fruitcake ZIP file I downloaded according to your link, I'm not sure what to do with that. lol
Help?
Click to expand...
Click to collapse
Ok, sorry I wasn't that detailed in my other post and assumed you were on your phone (my bad). First things first, read the N00b guide.
1. Anytime you download CWM .zips, put them on the root of your phone's sdcard. You'll need them there in order access them from recovery. ( note: sdcard=internal sd card & sdcard-ext=external sd card for blur ROMS )
2. Fastboot commands are executed from the command line. Open a command prompt and navigate to the directory containing fastboot.exe in order to use it. The Noob guide should have links to all the fastboot commands you'll need.
3. With the Atrix's unlocked BL, holding Volume Down when turning the phone on will bring up a series of bootmodes to choose from. This is how you get into fastboot, recovery, RSD, etc. Navigate through the choices with Volume Down. Select one by pressing Volume Up. You should only ever really need Fastboot and Android Recovery.
4. CWM is used to flash .zips (ROMS, kernels, apps) while in recovery mode. Use romracer's to make things easier on yourself later.
Read through the N00b guide and this will all make perfect sense.
I have no idea what Im doing. I think because this phone has been tampered with so much already, it's making it extra tough to work with.
I managed to install CM7. Its the only ZIP file that actually seemed to take. I still dont understand fastboot , in the sense that I don;t know when Im supposed to see a command prompt. Also, now, CM7 is asking me to upgrade to premium and I have to pay for it. There doesnt seem to be a free way of installing it so that I can sync all my info through my google account. Ugh. Im not cut out for this but Ive been screwing with this literally since 730 this morning.
**CM7 with google apps packet installed. So far, so good. Im happy with this considering its pretty close to stock gingerbread, kinda like my G2. Now, Im hopefully done messing around. Would be nice if they release a solution for the fingerprint scanner or if I can get my gmail to auto sync but at least I can stop obsessing for the time being. Great help guys, thanks so much!!!!
Having recently purchased a TF300T with intent to customize the hell out of it, I ran into a big problem. There wasn't one definitive guide for my general case, some of the steps I read weren't completely clear, and I often had to put pieces together from multiple guides to get where I wanted. Halfway through the process it occurred to me that sharing my experience in form of a guide could give the community something I wish that I had when I began. So enough with the intro, let's visualize the process before we begin.
This guide is for new owners of TF300T devices that have Jelly Bean 4.1.X preflashed from the factory.
joelalmeidaptg said:
If your tablet has 4.2.1 Android version from Asus, DO NOT FLASH A RECOVERY THAT WAS ACTUALLY MADE FOR 4.1 TABLETS! You will end up on a PERMANENT BRICK with no solution until now. You won't be able to use fastboot ever again. You won't be able to flash anything ever again. You will be stuck with a bricked tablet!
If you are looking for a Recovery for a 4.2.1 bootloader (and a complete guide for updating), read this thread: http://forum.xda-developers.com/showthread.php?t=2187982 Don't do it with any other tutorial: they are for 4.1 bootloaders!
Click to expand...
Click to collapse
For those curious...
My TF300T was one of the Champagne Gold models purchased from Groupon with a serial that begins with C9. I recall seeing a user with a Champagne Gold from Amazon that still had ICS. If you're still on ICS, this guide isn't for you-- Read up on NVflash and decide if you want to take advantage of it BEFORE you upgrade to JB.
Here's an overview of what we will be doing:
Click to expand...
Click to collapse
Unlock the TF300T
Backup apps, app data and files (Recommended, Optional)
Install ClockworkMod Recovery (soon to be replaced with TWRP; I gave in)
Root the TF300T (Optional)
Backup your stock Asus ROM (Recommended, Optional)
Flash a Custom ROM
Backup your working Custom ROM (Optional)
Additional information you should know:
Click to expand...
Click to collapse
This guide has been made with the total android noob in mind. Having only owned an android tablet for a week, I too am an android noob. On the flipside, I'm no noob to hardware and software exploits and modifications. I've tried to make this friendly for any type of noob, but there are a few instances where I expect basic menu and Windows 7 navigation skills.
ClockworkMod Recovery doesn't appear to have a "Shutdown" function, nor does it display current battery level-- for this reason, the recommendation and warning to have a battery charged to at least 60% is extremely heavy. The worst thing that can happen to any device is usually an incomplete flash. Don't let it happen to you-- start charging your TF300T NOW.
I have seen reports that "Fastboot" doesn't work properly on Windows 7 64-bit. This guide addresses that issue, as I also encountered it. If you don't know what "Fastboot" is, in the words of an admirable comedian, "You gonna learn today". Don't worry about it for now!
Your device came with JB-- you didn't miss the bus for NVflash. In your case, the bus never came.
I am not responsible for any damages caused to (but not limited to) yourself or your device.
Even if you think you're pretty good at figuring this stuff out, stick to the directions as close as possible.
If you love tweaks, you're going to love your custom ROMs.
Let's get started!
Unlocking Your TF300T
Click to expand...
Click to collapse
WARNING: Unlocking your TF300T will void your warranty. If your device breaks or fails under normal use, don't expect Asus to pick up the tab! Be aware that once unlocked, it cannot be relocked.
There are two ways you can go about this-- Either download the official Asus unlock utility for Windows or download the .apk and install from your tablet (Asus utility still working! I successfully unlocked mine on JB 4.1.1). I chose to download the .apk and install directly on my tablet, therefore this is the method I will cover.
To download the .apk file, scan the QR Code below with Barcode Scanner (free; on Play store) and open the URL to the Asus Support page for the TF300T. Alternatively, if you are viewing this thread on your TF300T, you may simply tap the code below.
On the Asus Support page, select "Android" as your OS. The page will reload and present you with a list. Click on "Utilities", then after it has loaded, download the Unlock Device App. When it is done downloading, a notification will pop up in the lower right corner. Click on it to install the Unlock tool. You'll also be able to open the app immediately after the install completes-- open it now.
After scrolling to the bottom of the End User Licence Agreement, select the checkbox indicating that you agree to those terms. You should now have access to the slider that will unlock your tablet. Stay connected to your wifi and unlock when ready. The unlock will not work without access to the internet.
If I recall correctly, your tablet should reboot. Just let it do what it wants. After it's done doing it's thing, take this opportunity to make backups! when you and your tablet are ready, we'll continue on to the next step.
Setting Up The Android SDK and Installing ClockworkMod Recovery
Click to expand...
Click to collapse
Perhaps this was the most frustrating part of my experience-- Installing the Android SDK went fine when I could actually find the .exe download. After that it was a matter of getting the drivers for Fastboot working properly. I was able to narrow it down to a problem for users of Windows 7 64-bit.
From your PC, go HERE, scroll down and click on "Download For Other Platforms". Scroll down more and under the "SDK Tools Only" downloads, you should find a download that looks like: "installer_r##-windows.exe" where "##" is the revision number. Download this .exe and assuming Windows is installed on C:\, install it to either "C:\tools\android-sdk" or "C:\android-sdk". If Windows is not installed to drive letter C, replace the drive letter with the correct letter for your system. Do the same when following the command prompt examples that follow.
Open the Android SDK Manager. Search for "SDK Manager" in the start menu and you should find a result with the same name and a little android icon. Once it's open, you'll be presented with a list. Check the box next to the "Tools" folder, then expand the "Extras" folder and check the box next to "Google USB Driver". In the lower right corner, click "Install packages...", agree to all when ready and begin your downloads.
In the settings application of your tablet, go to the "Developer options" tab near the bottom. Ensure that the switch in the top right corner is in the "ON" position, then under the "Debugging" header, enable "Android debugging". Read the following carefully before you continue: Shut down your tablet and connect your USB cable. Hold the power and volume down buttons at the same time. Keep holding until you see a menu. The menu will consist of a few items, among them there is "RCK", a USB icon, an Android icon, and a "Wipe Data" icon. Tap volume down until the USB icon is selected, then press volume up. Cross your fingers and hope drivers install automatically.
They probably won't, so have windows look in the \android-sdk\extras\ folder. It should say the drivers installed successfully. Either way, open the start menu, and right click on "Computer". Click "Manage", then in the left hand pane of the new window, click "Device Manager". The "Other Devices" section may be already expanded in the center pane. If it is, look to see if "Fastboot" appears in that section with a yellow exclamation mark.
If it isn't there, you shouldn't be worried-- check for a section called "Android Phone" or "Portable Devices". Look for a device called "Android ADB Interface" or "Fastboot". It shouldn't have a yellow exclamation mark next to it.
In the event you have the device appearing with a yellow exclamation mark next to it, go HERE and download PdaNet. This was my remedy for this error. Unplug your TF300T from your computer and install PdaNet following instructions. During the install a warning will appear to install unsigned drivers. Install the driver anyway, and let the installation finish. You can now plug your TF300T back in, and it should be recognized automatically. Just in case, hold the volume down and power buttons again until your tablet restarts and you see your hidden menu again. Once again, tap volume down until the USB icon is selected, then press volume up again to select it. Check the Device Manager again and you should find the "Android Phone" section at the top. Within it, you'll find a device called "Android ADB Interface".
Now that we have your tablet and computer set up nicely, we can finally install ClockworkMod (CWM) Recovery. Go to THIS thread and download the attachment called "recovery-jb.img" (thanks XpLoDWilD!). It is VERY important that you download "recovery-jb.img" as this is the version for users with Jelly Bean bootloader!
Rename the file you just downloaded to "recovery.img" and place it in \android-sdk\platform-tools . In Windows 7, open the Start Menu and search for "cmd". You should see a result called "cmd.exe". Right click that result and click "Run as Administrator". Now type the following commands into the new command prompt window in order to flash CWM Recovery:
Code:
cd C:\tools\android-sdk\platform-tools\
fastboot -i 0x0B05 flash recovery recovery.img
DON'T unplug your tablet!! Don't close the window either! Wait for the command prompt to finish what it's doing, then you can type the final command:
Code:
fastboot -i 0x0B05 reboot
Your tablet will reboot. Once it has fully rebooted, shut it down and hold volume down and power again to access our tablet's hidden menu. This time, instead of selecting the USB icon, select "RCK" and press volume up. If I'm not mistaken, "RCK" stands for "ReCovery Kernel". ClockworkMod Recovery should load up. If it doesn't, then you were not successful in flashing CWM. If it does, then you can go to the Backup and Restore menu and create a backup.
I was overconfident when I went through all this, and I didn't make a backup-- for me, I wasn't able to get my SD card detected (64GB fat32), but even in this case you should be able to make a backup to your "Internal SD card". Unfortunately, you are on your own for this step. Make sure that you transfer this backup to your PC after creating it. You may need to disable Developer options in your TF300T's settings before you can transfer files over again.
In THIS post, XpLoDWilD gives instructions on how to Root your tablet. If I'm not mistaken, this applies to users who are using a ROM that does not already have root. If you care about Root right now, you can go ahead and flash his attached .zip file using CWM to your TF300T.
When I did this, I selected the .zip file with CWM and then went back to the main menu to select reboot. CWM then prompted me that it needed to fix permissions in order to keep Root. I tried it both ways-- first I let it fix permissions, then used a Play store app to check for root. Test came up negative, so I tried again without allowing it to fix permissions. Negative again. I tried again, allowing it to fix permissions again and then left it alone. If you are successful in rooting your TF300T, you can use Titanium Backup to backup your device later. However I used an app that did not require root that worked fine. The choice is yours.
Flashing a custom ROM
Click to expand...
Click to collapse
Now it's time to find a custom ROM to flash. For my guide I will cover Baked TF300T Blackbean #6-- Based on CyanogenMod10, and quite a nice upgrade from the stock ROM. The only downside I found is the Asus App Backup application is not included and cannot be installed. I'm unsure why this is the case-- I have even attempted to install it via CWM with no success. If you need this app or the App Locker app, I suggest you choose a non-CM10 ROM. You are on your own in deciding an alternative, but I have heard great things about CleanROM and I seem to recall reading that these incompatible Asus apps work on it. Don't take my word for it-- do your own research to make sure!
It should also be noted that ROMs like Blackbean #6 have some potentially dangerous settings that can make a power user salivate profusely.
Spiderman's Dad said:
With great power comes great responsibility
Click to expand...
Click to collapse
Okay, so it was his uncle, whatever. But either way, if you're going to install this ROM (or any other with overclock tweaks), BE CAREFUL when selecting different settings for CPU speed and overclocking. I used to overclock my PC as a hobby and pushed a 1.8GHz CPU to 2.77GHz on air cooling.. The thing I learned in the process is if you don't have the proper settings, your computer becomes unstable and weird things start happening. Data corruption, clicking the Start Menu does something crazy and unusual, PC crashes randomly, etc... Some of these errors are due to insufficient cooling-- a problem you cannot remedy when working with a portable device.
Assuming you are new to this tablet like I am, use this rule of thumb when dealing with foreign and potentially dangerous things: DON'T TOUCH IT until you understand it. Then when you understand it, understand it again. Then when you feel you've understood it twice, take baby steps. It's like jumping up a cement set of stairs-- you're definitely not going to try to jump five steps in your first attempt, unless you want to risk smashing your face and bloodying yourself up. Take it one step at a time-- make sure you can land on your feet before deciding to go further.
There's a lot of other options Blackbean #6 has that the average user can still appreciate, so ignore those overclocking/CPU stuff and focus on the other tweaks. Nova Launcher is included and is pretty sweet. I upgraded to Nova Launcher Prime and feel it's worth the extra $4, but I'll leave that for you to decide. There are more options than merely Nova Launcher alone, and not all of them have a price tag.
Without further adieu, let's download the Blackbean #6 ROM and Gapps. Head over to THIS official release thread for the downloads. The names of the files you want are:
baked_tf300t_blackbean-6_jb-bl_b6.zip
gappsinverted-jb-20121029-signed.zip
Put them into a folder called "bb6" and copy the folder over to your TF300T. If your SD card is working in CWM (from CWM, go to the "mount" menu and try to mount SD card), copy the folder to your SD card.
NOW is the time to do any final backups before your fresh ROM install! I recommend "App Backup & Restore" on the Play store. If your tablet is rooted, you can also use Titanium Backup. Both will work fine, though generally speaking people seem to prefer Titanium Backup. People also seem to prefer TWRP over CWM, but I personally find the design unappealing. More importantly, I could only find a proper guide on installing CWM on a factory flashed JB TF300T.
Once you've made your backups, don't do anything until these backups are safely transferred to your PC! Don't forget to backup your music, movies and photos...
Now that you're 100% confident you've made all the backups you need and your battery is well charged and ready to go, let's flash your custom ROM! Shutdown and enter our hidden menu you should be very familiar with by now. Boot into CWM (with RCK icon from hidden menu selected, press volume up), then press volume up/down to navigate.
READ THE FOLLOWING SECTION BEFORE DOING ANYTHING ELSE:
Select "install zip from sdcard" and tap power. If you placed your "bb6" folder on your SD card, tap the power button once more. If it says "Can't mount /sdcard/" in the bottom left corner, then select "choose zip from internal sdcard" and tap power. Earlier you should have put your ROM and Gapps in a folder called "bb6". If you can't find this folder in either the SD card or internal SD card locations, GO BACK, reboot, and make sure you put the folder on your TF300T or your SD card. You should also make sure that the ROM and the Gapps file are inside that folder as well. Do NOT unzip them! They are just fine as they are. We are NOT flashing the ROM and Gapps yet, we are merely making sure they are there before you wipe your tablet. If the files are there, go back to CWM's main menu.
Select "wipe data/factory reset" and tap the power button. Confirm that you want to wipe, wait for it to finish.
Now select "wipe cache partition" and press the power button. Confirm that you want to wipe, wait for it to finish.
Go back to the main menu and select "advanced" and tap power, then select "wipe dalvik cache" and tap power. Confirm that you want to wipe, wait for it to finish.
Don't worry! Your ROM and Gapps should still be in your bb6 folder. Navigate to "install zip from sdcard" again, and let's make the magic happen. We are going to install the ROM first, then install Gapps. Only after both the ROM and Gapps are installed will we reboot our tablet.
So select the ROM first, confirm that you want to install, wait for it to finish. This one will take a long time compared to the Gapps. Just be patient and wait, even though it looks like it's not doing anything.
Then select the Gapps, confirm that you want to install, wait for it to finish.
Finally, reboot your tablet and cross your fingers. You should be greeted with the sweet victory of the startup animation. Go through the first time setup routine, and make sure the tablet works. From here you can optionally backup your custom ROM, but I recommend getting your settings the way you like them before you backup.
Give yourself a pat on the back--you survived! Hope this guide helped someone out-- I was able to sort through my problems fine, but I felt it important to share my experience. I know I couldn't have been the first to hop through these hoops anyway.
Congrats on your custom ROM Transformer Pad. Enjoy your tablet.
P.S. Questions? Comments? Suggestions? If you have any of the three, feel free to share! If it's a suggestion, please PM me and I'll see about making edits to my guide. All are appreciated, and especially anything that clears up any uncertainties I've expressed.
Special thanks (individuals and groups I owe credit for my process):
Drgravy, Team Baked, and everyone who wrote code that was used in the Blackbean ROMs. Blackbean #6 is my first custom ROM, and so far it's been great!! Keep up the awesome work!
XpLoDWilD, for CWM Recovery + Root on TF300T. These files and instructions were the major keys in making my endeavor a success
I also want to send out a big thank you to every other individual and team who has released a custom ROM for the TF300T-- admirable work, and far more than I could ever do. Thanks for giving us options and making us excited to have a customized tablet!
(....And many more! Currently in finals week (yikes) and can't recall everything right now-- will add more as I remember)
It's a shame that such a well written guide has so little thanks. Have mine.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Very nice. hopefully this helps people just getting the tf300.
note, if you want to install TWRP recovery instead, your command will change accordingly, just make sure you type in the exact file name you want to flash. so if your recovery file is named twrp.blob:
fastboot -i 0x0B05 flash recovery twrp.blob
Thanks!
Your guide helped me a lot. I had problems only with root. Flashed 4 times, but always got "no root acces". Finally, I downloaded root package from here http://forum.xda-developers.com/showthread.php?t=1845377 and it works well
is there any way around that "unknown error..." when i try to use the unlock app yet?
I keep trying but the same error message keeps coming up
sq1ne said:
is there any way around that "unknown error..." when i try to use the unlock app yet?
I keep trying but the same error message keeps coming up
Click to expand...
Click to collapse
Is your tf300 new? first hand? or have u ever sent it to asus for repair before?
Well written, well thought out instructions. Many, many thanks!! I'm still having some trouble though. I get stuck once I download the unlock app, open it, agree to the EULA, then another warning appears that is a black screen white text and a yellow triangle. Nothing happens after that. There are no buttons to agree, no checkboxes, nothing happens. Any advice?
*UPDATE* Figured it out. Be sure to sent the font in settings->display->font size to small, then you will see it. The large font pushes the agree button off the bottom of the screen.
It would be great if CWM in this OP were replaced with TWRP. Many are having issues with CWM. Me being one of them. I flashed TWRP with fastboot and no more problems!
I agree with the post above. Sad that such a well written post has so little thanks. :good:
thnx for this amazing guide, but I am still unsure of this guide will work for me.
I am from Holland (Europe)
specs from my ASUS Transformer TF300T:
Android 4.1.1
Kernel 3.1.10 ([email protected])
Buildnr JR003C.WW_epad-10.4.2.18-20121122
Pad EC Version PAD-EC20T-0216
My question is...will this guide also work for me? ...since I have JB 4.1.1 & build 10.4.2.18
I am also worried about the fact that this guide in for an american(?) transformer I gues...so do I need other files then the files mentioned?
I would love to have ROOT and install a custom rom and remove bloatware etc.
thnx for the help in advance!
Thank you so much, perfect for so many people here.
Can you edit it with TWRP? I would use this right now but as above poster said there have been issues with CWM so don't want to try it.
P.s. i got mine from groupon too
Tamaskan said:
Is your tf300 new? first hand? or have u ever sent it to asus for repair before?
Click to expand...
Click to collapse
bought mine brand new just this past Black Friday.
updated to .18 firmware
I don't want to have to send it in.
GodfleshNL said:
thnx for this amazing guide, but I am still unsure of this guide will work for me.
I am from Holland (Europe)
specs from my ASUS Transformer TF300T:
Android 4.1.1
Kernel 3.1.10 ([email protected])
Buildnr JR003C.WW_epad-10.4.2.18-20121122
Pad EC Version PAD-EC20T-0216
My question is...will this guide also work for me? ...since I have JB 4.1.1 & build 10.4.2.18
I am also worried about the fact that this guide in for an american(?) transformer I gues...so do I need other files then the files mentioned?
I would love to have ROOT and install a custom rom and remove bloatware etc.
thnx for the help in advance!
Click to expand...
Click to collapse
Yes, it will work, I've tried it. But i suggest you use TWRP custom recovery though. CWM has high chances of getting bricked.
Tamaskan said:
Yes, it will work, I've tried it. But i suggest you use TWRP custom recovery though. CWM has high chances of getting bricked.
Click to expand...
Click to collapse
Could you also please add a NOOB tutorial for installing TWRP Recovery (this forum is very confusing in getting the right tutorials / avoiding outdated tutorials which would brick my TF300T etc)?
Example:
quote from XDA forum in TWRP topic: "The fastest and easiest way to install TWRP is to use the GooManager app" <--- GooMnager needs ROOT so I can't use this method?
My ASUS TF300T is completely untouched & unrooted still and don't won't to mess it up.
GodfleshNL said:
Could you also please add a NOOB tutorial for installing TWRP Recovery (this forum is very confusing in getting the right tutorials / avoiding outdated tutorials which would brick my TF300T etc)?
Example:
quote from XDA forum in TWRP topic: "The fastest and easiest way to install TWRP is to use the GooManager app" <--- GooMnager needs ROOT so I can't use this method?
My ASUS TF300T is completely untouched & unrooted still and don't won't to mess it up.
Click to expand...
Click to collapse
www.mediafire.com/?7v1gwbbzqzvzto7 <- fastboot and twrp, the twrp is out dated so if you want you can download new one from twrp website.
2)Extract the recovery with fastboot files zip and open a command prompt in the same folder of the adb and fastboot files (you must click the fastboot and adb when extracred and i suggest you put your extracted fastboot and recovery zip in C:\(foldername) and then open cmd)
3) Reboot into the bootloader of your tablet, type: adb reboot bootloader
4) When your tablet has reached the bootloader navigate with volume down to the usb icon and press volume up to confirm.
5) To flash the recovery type:
fastboot -i 0x0b05 flash recovery tf300t-jb.blob
Credits to krabappel2548.
Tamaskan said:
www.mediafire.com/?7v1gwbbzqzvzto7 <- fastboot and twrp, the twrp is out dated so if you want you can download new one from twrp website.
2)Extract the recovery with fastboot files zip and open a command prompt in the same folder of the adb and fastboot files (you must click the fastboot and adb when extracred and i suggest you put your extracted fastboot and recovery zip in C:\(foldername) and then open cmd)
3) Reboot into the bootloader of your tablet, type: adb reboot bootloader
4) When your tablet has reached the bootloader navigate with volume down to the usb icon and press volume up to confirm.
5) To flash the recovery type:
fastboot -i 0x0b05 flash recovery tf300t-jb.blob
Credits to krabappel2548.
Click to expand...
Click to collapse
Here is a little update on my progress...
- I unlocked the bootloader of my TF300T
- I managed to install latest TWRP
- Made a (COMPLETE) backup of the untouchedl system with TWRP <--- DO THIS BEFORE ANYTHING ELSE!
- Rooted the TF300T with the WW file in this topic: http://forum.xda-developers.com/showthread.php?t=2033205 <----works awesome!
- Made a second (COMPLETE) backup of the now ROOTED system with TWRP
- Tried installing the latest "Cleanrom 3.01 Inheritance", but got the infamous "bootloop" too...the rom has been pulled down from the forum till that is fixed ( I thought I had done something wtong flashing a custom rom, but actually a lot of others had the same problem)
- Waiting for a "bootloop fixed" Cleanrom Inheritance 3.02....and gonna try flashing it again.
first of all thanks a lot ive been going crazy looking for this!! my question is will it work for me?
i bought my tf300t in sept with ics and upgraded to jb....
also i tried this not to long ago and ran into a problem after i unlocked
so right now its just unlocked but not rooted do i need to reverse that or what?
my apologies im extremely noob haha
GodfleshNL said:
Here is a little update on my progress...
- I unlocked the bootloader of my TF300T
- I managed to install latest TWRP
- Made a (COMPLETE) backup of the untouchedl system with TWRP <--- DO THIS BEFORE ANYTHING ELSE!
- Rooted the TF300T with the WW file in this topic: http://forum.xda-developers.com/showthread.php?t=2033205 <----works awesome!
- Made a second (COMPLETE) backup of the now ROOTED system with TWRP
- Tried installing the latest "Cleanrom 3.01 Inheritance", but got the infamous "bootloop" too...the rom has been pulled down from the forum till that is fixed ( I thought I had done something wtong flashing a custom rom, but actually a lot of others had the same problem)
- Waiting for a "bootloop fixed" Cleanrom Inheritance 3.02....and gonna try flashing it again.
Click to expand...
Click to collapse
i never backup.... I only backup app using titanium backuo, if something on the rom goes wrong i just reflash latest firmware from asus website. If you like custom roms, i suggest you use Energy Rom if you want OC or Hydro rom if you want just modified stock rom with better performance.
I have a problem while I try to run the flash recovery command. I have done all steps prior to this.The only difference I see is in device manager I get "ASUS Android Devices". Now, the error I am getting comes after trying to run the command, I get "error: cannot load 'recovery.img' No error" . I have also tried the pdanet solution. Thank you for your help in advance.
Stupid question... but I am going to ask it. Having never rooted my TF300 it is on latest firmware will this guide still apply to be even though I bought my device running ICS but have updated to latest firmware? Have never rooted tablets before so all new to this.
Agera said:
Stupid question... but I am going to ask it. Having never rooted my TF300 it is on latest firmware will this guide still apply to be even though I bought my device running ICS but have updated to latest firmware? Have never rooted tablets before so all new to this.
Click to expand...
Click to collapse
It will work as long as you are using Jelly Bean