Related
I have successfully flashed my Sprint THC hero with no problems.
My issue though is flashing the phone to 2.1d. i can't for the life of me follow these directions and I am really stumped on the process of doing a nandroid and flashing the ROM.
I downloaded the nandroid from this site but not sure where I put the directory with the files at. Can anyone break this process down into "ejpyle terminology"?
My problems are:
- where to copy the nandroid directory
- where to put the 2.1d ROM
- do i need this busybox that everyone is talking about?
Successfully flashed what? And what method.
If you mean you successfully ROOTED your Phone then huzzah, that's step one complete.
Part of the rooting process should include putting a recovery image on the phone. If you did that correctly then do this, power off the phone.hold down the home button and power it back up. In a few seconds you should boot into a recovery menu with options to do a nandroid backup/restore turn on the usb connection to move files to the phone from your pc, and flashing a zip. If you don't have this recovery menu then you need to install it.
I don't think you have downloaded a Nandroid, I think you have downloaded an "update.zip" as we so affectionitly call them around here. This is a term used from the first set of recovery tools we had, where we had to rename update files update.zip to be loaded. Thankfully the recovery software has been updated to let us store and use multiple files.
So you probable have fresh-cdma-hero-2.0d.zip downloaded.
Plug your phone into USB and set it to Mount SD Card or what ever it says in 1.5
Copy this file to the root of the sdcard. don't put it in to any folders just F:\ or whatever the drive letter is.
THEN
Unmount the sdcard or turn off the disk drive mode (Cant remember what 1.5 calls it)
THEN
Power off the phone.
Power the phone back on whilst holding the home key. When you feel the vibration (let your girl hold it if she wants ROFL) let go and it will boot into recovery.
THEN
Go to Wipe...do Factory Reset
THEN
Wipe dalvik
THEN
Go back to Flash Update from SDcard
Select the update file above and hit the home key to flash it.
The phone SHOULD install and go back to the main screen of recovery.
THEN select
Reboot
THEN
Wait a hell of a long time 10+ minutes is NOT uncommon (it has to rebuild dalvik and other stuff)
THEN
When the phone boots hit Always Allow for the memory settings app.
THEN
Setup all your google info again.....
THEN
You should be good to go
AND DEN????????
HAHAHAHAHAHAHA
EDIT:
I am SURE that I left a step out above, just go with the flow and wipe everything under the wipe menu. It's laid out so a monkey can do this stuff...hence the reason I am able to.
gunnyman said:
Successfully flashed what? And what method.
If you mean you successfully ROOTED your Phone then huzzah, that's step one complete.
Part of the rooting process should include putting a recovery image on the phone. If you did that correctly then do this, power off the phone.hold down the home button and power it back up. In a few seconds you should boot into a recovery menu with options to do a nandroid backup/restore turn on the usb connection to move files to the phone from your pc, and flashing a zip. If you don't have this recovery menu then you need to install it.
Click to expand...
Click to collapse
thank you thank thank you... you have me going in the right directions.
Quesion..what is the best (most reliable without as many bugs) ROM to load that is 2.0-1?
ejpyle said:
thank you thank thank you... you have me going in the right directions.
Quesion..what is the best (most reliable without as many bugs) ROM to load that is 2.0-1?
Click to expand...
Click to collapse
Not to be rude, because you seem like a decent enough person, but please read http://forum.xda-developers.com/showthread.php?t=668905 before asking anything else. Most of your answers are there, and 'search' will find the rest.
Kcarpenter said:
I don't think you have downloaded a Nandroid, I think you have downloaded an "update.zip" as we so affectionitly call them around here. This is a term used from the first set of recovery tools we had, where we had to rename update files update.zip to be loaded. Thankfully the recovery software has been updated to let us store and use multiple files.
So you probable have fresh-cdma-hero-2.0d.zip downloaded.
Plug your phone into USB and set it to Mount SD Card or what ever it says in 1.5
Copy this file to the root of the sdcard. don't put it in to any folders just F:\ or whatever the drive letter is.
THEN
Unmount the sdcard or turn off the disk drive mode (Cant remember what 1.5 calls it)
THEN
Power off the phone.
Power the phone back on whilst holding the home key. When you feel the vibration (let your girl hold it if she wants ROFL) let go and it will boot into recovery.
THEN
Go to Wipe...do Factory Reset
THEN
Wipe dalvik
THEN
Go back to Flash Update from SDcard
Select the update file above and hit the home key to flash it.
The phone SHOULD install and go back to the main screen of recovery.
THEN select
Reboot
THEN
Wait a hell of a long time 10+ minutes is NOT uncommon (it has to rebuild dalvik and other stuff)
THEN
When the phone boots hit Always Allow for the memory settings app.
THEN
Setup all your google info again.....
THEN
You should be good to go
AND DEN????????
HAHAHAHAHAHAHA
EDIT:
I am SURE that I left a step out above, just go with the flow and wipe everything under the wipe menu. It's laid out so a monkey can do this stuff...hence the reason I am able to.
Click to expand...
Click to collapse
You rock....You just taught a death and blind monkey how to do it. Thanks man!!!!! I will be sure to have my wife hold the phone for the vibrate thing. LMFAO
ejpyle said:
thank you thank thank you... you have me going in the right directions.
Quesion..what is the best (most reliable without as many bugs) ROM to load that is 2.0-1?
Click to expand...
Click to collapse
There is no best one. The 2.1 ROMS are all very stable. Just avoid the ones that say {DEV} in the thread title because they are under development and likely have lots of stuff broken in them.
Decide what you want for yourself, beauty, speed, both? A good hint is to look for the ROM threads that have the most pages attached to them these are the ROMS that have the most discussion and help within them.
ejpyle said:
You rock....You just taught a death and blind monkey how to do it. Thanks man!!!!! I will be sure to have my wife hold the phone for the vibrate thing. LMFAO
Click to expand...
Click to collapse
DO NOT FLASH THE 2.1 Signed RUU Test ROM
OR I WILL FIND AND KILL YOU!
gunnyman said:
There is no best one. The 2.1 ROMS are all very stable. Just avoid the ones that say {DEV} in the thread title because they are under development and likely have lots of stuff broken in them.
Decide what you want for yourself, beauty, speed, both? A good hint is to look for the ROM threads that have the most pages attached to them these are the ROMS that have the most discussion and help within them.
Click to expand...
Click to collapse
thanks man, if I win the power ball lottery I will be sending you all a private message.
one more quickie though, If Sprint releases the 2.1 before I become eligible for AARP will I have to flash back to the 1.5 version before updating my device with it?
Kcarpenter said:
I don't think you have downloaded a Nandroid, I think you have downloaded an "update.zip" as we so affectionitly call them around here. This is a term used from the first set of recovery tools we had, where we had to rename update files update.zip to be loaded. Thankfully the recovery software has been updated to let us store and use multiple files.
So you probable have fresh-cdma-hero-2.0d.zip downloaded.
Plug your phone into USB and set it to Mount SD Card or what ever it says in 1.5
Copy this file to the root of the sdcard. don't put it in to any folders just F:\ or whatever the drive letter is.
THEN
Unmount the sdcard or turn off the disk drive mode (Cant remember what 1.5 calls it)
THEN
Power off the phone.
Power the phone back on whilst holding the home key. When you feel the vibration (let your girl hold it if she wants ROFL) let go and it will boot into recovery.
THEN
Go to Wipe...do Factory Reset
THEN
Wipe dalvik
THEN
Go back to Flash Update from SDcard
Select the update file above and hit the home key to flash it.
The phone SHOULD install and go back to the main screen of recovery.
THEN select
Reboot
THEN
Wait a hell of a long time 10+ minutes is NOT uncommon (it has to rebuild dalvik and other stuff)
THEN
When the phone boots hit Always Allow for the memory settings app.
THEN
Setup all your google info again.....
THEN
You should be good to go
AND DEN????????
HAHAHAHAHAHAHA
EDIT:
I am SURE that I left a step out above, just go with the flow and wipe everything under the wipe menu. It's laid out so a monkey can do this stuff...hence the reason I am able to.
Click to expand...
Click to collapse
I hope the possible step left out above does not give me "another" bricked phone.
ejpyle said:
I hope the possible step left out above does not give me "another" bricked phone.
Click to expand...
Click to collapse
I think I may have left out a step if you have apps on your sd card...
NOT WAIT I LEFT OUT THE DO A NANDROID BACK UP FIRST!!!!!!!!!!! DO THAT FIRST!!!! HOLY CRAP I HOPE YOU HAVEN'T DONE ANYTHING YET!!! DO A NANDROID!!!!!!!
Nope no chance at all of that as far as I can tell.
The only bricks we have seen are from people downloading GSM software or dropping a brick on their phone...that sounded funnier in my head.
smw6180 said:
Not to be rude, because you seem like a decent enough person, but please read http://forum.xda-developers.com/showthread.php?t=668905 before asking anything else. Most of your answers are there, and 'search' will find the rest.
Click to expand...
Click to collapse
Because you too seem like a decent person I will share this with you....
I followed a thread on here at the beginning of march to install a ROM and the directions (which I followed exact) bricked my phone. I spent hours reading up on this website to find out after the fact that the RUU might have a bug and some users will have issues. With that said, I decided to ask questions. This site has a lot of cleanup going on (no disrespect to anyone here as you are all VERY intelligent) and I do not think that someone as myself would be comfortable just "searching" for the answer without asking questions first with respect to the experience we have had in the past.
Kcarpenter said:
I think I may have left out a step if you have apps on your sd card...
NOT WAIT I LEFT OUT THE DO A NANDROID BACK UP FIRST!!!!!!!!!!! DO THAT FIRST!!!! HOLY CRAP I HOPE YOU HAVEN'T DONE ANYTHING YET!!! DO A NANDROID!!!!!!!
Nope no chance at all of that as far as I can tell.
The only bricks we have seen are from people downloading GSM software or dropping a brick on their phone...that sounded funnier in my head.
Click to expand...
Click to collapse
LOL I have not done it yet. I am about to copy this nandroid - file name "nandroid-2.0.zip" to my SDCARD. then i will do it.
ejpyle said:
LOL I have not done it yet. I am about to copy this nandroid - file name "nandroid-2.0.zip" to my SDCARD. then i will do it.
Click to expand...
Click to collapse
So you have gotten me curious now, where did you pick up that file at?
My only guess is that someone has posted a nandroid of their device and zipped it. Most of the Rom downloads are ROMNAME.zip....
You can always try to load it, it won't load if its not setup properly inside for a rom.
And about your going back to 1.5 to update to sprints 2.1:
IF YOU UPDATE TO SPRINTS OTA 2.1 UPDATE YOU WILL NOT BE ABLE TO ROOT AGAIN UNTIL SOMEONE FINDS ANOTHER EXPLOIT!!! WHICH COULD BE NEVER!!
Kcarpenter said:
So you have gotten me curious now, where did you pick up that file at?
My only guess is that someone has posted a nandroid of their device and zipped it. Most of the Rom downloads are ROMNAME.zip....
You can always try to load it, it won't load if its not setup properly inside for a rom.
And about your going back to 1.5 to update to sprints 2.1:
IF YOU UPDATE TO SPRINTS OTA 2.1 UPDATE YOU WILL NOT BE ABLE TO ROOT AGAIN UNTIL SOMEONE FINDS ANOTHER EXPLOIT!!! WHICH COULD BE NEVER!!
Click to expand...
Click to collapse
I got it from here....
http://dx.infernix.net/nandroid-2.0.zip
when you boot into recovery, what do you see?
If you rooted correctly and put a recovery image on there there isn't anything else you have to do to enable Nandroid.
ejpyle said:
I got it from here....
http://dx.infernix.net/nandroid-2.0.zip
Click to expand...
Click to collapse
Ok, so this leads me to another question. Where is the thread that links to this download?
The reason I am worried about this file now that I see it:
It's only 942kb - WAY to small for a rom or nandroid.
gunnyman said:
when you boot into recovery, what do you see?
If you rooted correctly and put a recovery image on there there isn't anything else you have to do to enable Nandroid.
Click to expand...
Click to collapse
I had a triangle with an exclamation point.
I am copying the recovery to my SDCARD now... recovery-RA-heroc-v1.5.2
ejpyle said:
I had a triangle with an exclamation point.
I am copying the recovery to my SDCARD now... recovery-RA-heroc-v1.5.2
Click to expand...
Click to collapse
1.6.2 is the latest. Not a whole lot different from 1.5.2 but some bugs where fixed and you can get the nifty Green Nexus Carebear back ground.
Kcarpenter said:
1.6.2 is the latest. Not a whole lot different from 1.5.2 but some bugs where fixed and you can get the nifty Green Nexus Carebear back ground.
Click to expand...
Click to collapse
I copied everything you indicated to my card. When I press HOME and PWR together I get a triangle with an exclamation point. Did this monkey not do something right?
I have an Acer 500a I just bought off carigslist. Initially I thought it would be fine but then I realized I was inheriting someone elses problems. I hope someone may be able to help.
Within the first few hours I was noticing google Play crashed a number of times and struggled to update from Market. Somehow the update went through but now there is a system update that won't go through. I'm able to down load it and when i restart the computer to complete installation the screen goes black and says: booting recovery kernel in the corner. I then see a picture of an android and a load bar which after 2-4 seconds the android is on his back and an exclaimation mark is coming out of his belly.
My android version is 3.2
Kernel version
2.6.36.3+
Build number
Acer_a500_7.006.01_COM_GEN2
I'm pretty sure its rooted and i think that might be why its not playing nice with google market and system updates. I called the old owner and explained the problem and he just said he had it rooted and he thought he unrooted it. There is an ap called superuser in aps. (although if it were rooted would'nt I be able to uninstal some of thecrap software it comes with like GOLF HD? -- it won't let me).
The system update is for Acer_a500_7.014.01_COM_GEN2 8.88mb
My problem is all of the force closes I'm getting and the inability to update the system. Any thoughts? I don't have a usb cord to connect it to a desktop either =(
I am a bit out of practice, but...
Should be pretty simple to fix. From what I am seeing, you are running a stock rom. Just because the superuser.apk is installed on the system does not mean it is rooted, but it probably is.
Hit the market, grab "Root Checker" - simple tiny program to let you know for sure if your tab is rooted or not.
https://play.google.com/store/apps/details?id=burrows.apps.rootchecker&hl=en
From what I understand - automatic system updates will fail when trying to apply them to a rooted or modded system. Probably why you cannot auto-update.
My advice at this point would be to:
1) Since you just bought it, just do a factory wipe on it. That will remove all the stuff the prior owner had running on it and will result in a unrooted tab that should be able to get auto updates without a problem.
2) Un-Root it. Once the tablet is unrooted, the system should update without any issue.
As for your Play Store issues - I have never heard of or personally seen any issues caused with installing apps from the store on a rooted device. I have seen a few apps that will refuse to run on a rooted device - but that does not sound like your problem.
I would go with option 1 - just factory wipe the thing. Prior owner may have made tons of changes to the OS that we will never know about, and may have handed you a unstable system. Start fresh. Wipe it out.
Hope this helps you out! Let me know if I can answer any questions.
k thank you so much for the quick reply! I downloaded the root checker and it Is rooted. I did a factory wipe as found in the settings privacy tab when I bought it. That factory reset did not unroot and only cleaned out some of the aps on the device. Is there a better or more surefire way to unroot it? If I reset with the volume down key will it hard reset it?
Thank you for you help!
Draight
Okay.
I am about a year out of practice with my a500 - but from what I am think, if a factory reset still results in a rooted device - the prior user installed a stock ROM that comes pre-rooted.
I highly doubt being rooted is causing the issues you are running into.
At this point if you just want to get back to stock you can probably just install the Acer Recovery Manager from the market and use it to reflash a stock unrooted ROM. Or I see a few guides about how to manually restore back to stock over in the dev section for the a500.
Others will correct me if I am wrong, but I think Acer Recovery Manager should take care of your problem.
Hope this helps!
(Edit: Or you can just download the official stock 4.x rom (ICS) from the dev section and flash that. 3.2 is pretty slow and wonky in my experience, you should be able to just download a 4.x ROM and flash, since you are rooted. Again, I am way out of practice. Don't do anything before reading up!)
(Edit again: I think I was making this harder then needs be. Just flash any stock 3.2 unrooted ROM, done. After you do that the automatic on the air update should kick in for you and update you to ICS)
Thanks for taking the time to work with me on this. I downloaded the program you suggested and tried to use a stock rom. When i went to reboot I had a picture of an android looking up at an exclaimation mark. It was froze like that until I restarted it. Now its back to the way it was, rooted and unupdatable.
I'm probably going to try to just wipe it all over but do i need to plug it into my computer somehow? I dont have a usb connector for the tablet, just the wall charger plugin. can i just download a rom and use the utility to try install it? when I reboot it am I supposed to be pressing the volume button?
I've read a few other forums but usually they sound pretty intense...
draight said:
Thanks for taking the time to work with me on this. I downloaded the program you suggested and tried to use a stock rom. When i went to reboot I had a picture of an android looking up at an exclaimation mark. It was froze like that until I restarted it. Now its back to the way it was, rooted and unupdatable.
I'm probably going to try to just wipe it all over but do i need to plug it into my computer somehow? I dont have a usb connector for the tablet, just the wall charger plugin. can i just download a rom and use the utility to try install it? when I reboot it am I supposed to be pressing the volume button?
I've read a few other forums but usually they sound pretty intense...
Click to expand...
Click to collapse
Hmmm..
Try the thread I linked two in my second edit of my last post. You just need to grab the stock and unrooted 3.2 - put it on a MicroSD card as update.zip - then reboot with vol rocker and power switch to get the system to flash the update.
That *should* work just fine.
(Edit: Forgot the link! http://forum.xda-developers.com/showthread.php?t=1839313 - there you go)
Thankw, I am going to try it after readingna bit more. Do I need to have clockworkmod installed for all of this?
draight said:
Thankw, I am going to try it after readingna bit more. Do I need to have clockworkmod installed for all of this?
Click to expand...
Click to collapse
Nope. Just snag the stock unrooted 3.2 ROM - place it in the root of the MicroSD card as update.zip
Power down.
Power up with VOL + and POWER key held at the same time (you can let the vol rocker go when you see text appear in the upper left corner)
Should be all you need to do. Worst case; it does not work and returns you back to where you are now. Worth a shot.
If that does not work, let me know so I can do a few mins of homework and help you further. Been a long time since I have changed ROMS or had any issues with my a500.
I have bricked it twice by not following directions all the way or just making simple mistakes, but from what I have found there is always a way to recover.
Just tried it. I copied the boot zip to sd card and renamed update.zip and reset..It looked like it was going to download after showing some text in the corner and then an exclamation mark appeared above the androids head... I left it and after a few.min it rebooted back
draight said:
Just tried it. I copied the boot zip to sd card and renamed update.zip and reset..It looked like it was going to download after showing some text in the corner and then an exclamation mark appeared above the androids head... I left it and after a few.min it rebooted back
Click to expand...
Click to collapse
Hmmm. Odd.
Like I said, I am rather out of practice.
Someone more experienced them me: please help me point Draight in the right direction here?
Thanks for trying to help. =(
I wish that my tablet wasn't having such issues. I;m going to try to scramble around the forums and see if I can find some advice...If anyone has a suggestion please let me know.
Thanks again entropy,
Draight
Update:
So I've been tinkering around with it a bit more and I found a usb cord that plugs it into my computer. I keep finding boken links on this site so Im struggling to find an update I can use to flash to. I downloaded a different super user program which allowed me to temporarily unroot my device. I then restarted it and no root checker says its no rooted and I cannot find the superuser program. I think I have somewhat unrooted it -- but I think the real issue now is the recovery tool. I keep reseting it - hard reset, or factory reset and it wipes everything away but when i try to update it gets about 1/3 of the way up the bar then it stops with an '!' Mark above the droid. Im kind of annoyed at this point and hoping for some new links or some ideas on how to repair the recovery piece.
Draight
Go to the Dev section, and grad a couple of the ICS Update roms. You will see them listed for the a500. Make sure they are the FULL update roms. Should be about 3-400mb. These contain a FULL ICS Update Rom, and not a patch file.
http://forum.xda-developers.com/showthread.php?t=1816560
Then, go to the Themes and apps forum. You'll see a sticky that has the Acer Update Decrypter.
http://forum.xda-developers.com/showthread.php?t=1869505
Now, unpack the decrypter, and select one of the ICS Updates. Then hit Start. Take a couple minutes, but you will have a duplicate file with the word "decrypted" added to it.
Wait, you are not done yet.
Using a program like 7zip, or even Winzip, open the decrypted file. DO NOT EXTRACT, just open it and pull the update.zip to your PC's desktop.
Copy that update.zip file to your Ext SD Card of the tablet. Don't be putting it in any folder, just copy it to the root of the card.
Now, you still ain't done.
With the tablet off. Press and hold Vol+ and then PWR. Hold them both untill you start to see text about installing blah blah blah, then release the buttons.
If it completes, and you can reboot into ICS, then you are good to go.
If something fails during installation, then decrypt the other update Rom file you downloaded, and do the same procedure. Usually one of the 2 or three should work for you.
Note these are for the a500, and not the a501.
One more thing. It's advisable you get your UID number before doing these things. You probably won't need it, but it's nice to have written down in case you need it in the future. Inf to get it is at;
http://forum.xda-developers.com/showthread.php?t=1624645
MD
Thanks! I am downloading a few of the FULL ICS roms:
*Acer_A500_1.031.00_WW_GEN1 : http://d-h.st/uAy
Acer_A500_1.031.00_PA_CUS1: http://d-h.st/idO
Acer_A500_1.041.00_WW_CUS1: http://d-h.st/Yt5
*Acer_AV041_1.054.00_WW_GEN1: http://www.theandroidcollective.org/...00_WW_GEN1.zip
*Acer_A500_7.014.16_041.206.01_COM_GEN1: https://docs.google.com/file/d/0B_bk...hVc1RVcHc/edit
The I downloaded the ones ending with Gen1. Once they are downloaded I will continue with the instructions. Thank you so much for your help! I will post how it goes later tonight.
Draight
I just decrypted both:
*Acer_AV041_1.054.00_WW_GEN1:
*Acer_A500_1.031.00_WW_GEN1
Both get get to the third bullet quickly and the bottom says DONE! It takes like 4 seconds. I don't think the Decryption key of $12 is working
[*] Opening file: Acer_A500_1.031.00_WW_GEN1.zip
[*] Decrypting using key $12
[*] Writing decrypted file: Acer_A500_1.031.00_WW_GEN1_decrypted.zip
I try to extract something from the decrypted file and it says the file was not downloaded properly and I should try redownload it...it says its not a proper archive
wahoo!
So that worked! I down loaded the file Acer_AV041_A500_1.033.00_PA_CUS1 and extracted the update. I palced the update on the sd card and booted with the power and sound volume pressed down. it went through the installation procedure and restarted twice before saying it was upgrading my aps and BOOM its got ICS and everything looks great. Thank you so much for your help and I hope that this paper trail is able to help someone in the future
My problem is that I'm on ICS and I'm rooted, but I just can't download a custom recovery. I've tried, and I haven't gotten anywhere
Sent from my SPH-L710 using Tapatalk 2
Having recently purchased a TF300T with intent to customize the hell out of it, I ran into a big problem. There wasn't one definitive guide for my general case, some of the steps I read weren't completely clear, and I often had to put pieces together from multiple guides to get where I wanted. Halfway through the process it occurred to me that sharing my experience in form of a guide could give the community something I wish that I had when I began. So enough with the intro, let's visualize the process before we begin.
This guide is for new owners of TF300T devices that have Jelly Bean 4.1.X preflashed from the factory.
joelalmeidaptg said:
If your tablet has 4.2.1 Android version from Asus, DO NOT FLASH A RECOVERY THAT WAS ACTUALLY MADE FOR 4.1 TABLETS! You will end up on a PERMANENT BRICK with no solution until now. You won't be able to use fastboot ever again. You won't be able to flash anything ever again. You will be stuck with a bricked tablet!
If you are looking for a Recovery for a 4.2.1 bootloader (and a complete guide for updating), read this thread: http://forum.xda-developers.com/showthread.php?t=2187982 Don't do it with any other tutorial: they are for 4.1 bootloaders!
Click to expand...
Click to collapse
For those curious...
My TF300T was one of the Champagne Gold models purchased from Groupon with a serial that begins with C9. I recall seeing a user with a Champagne Gold from Amazon that still had ICS. If you're still on ICS, this guide isn't for you-- Read up on NVflash and decide if you want to take advantage of it BEFORE you upgrade to JB.
Here's an overview of what we will be doing:
Click to expand...
Click to collapse
Unlock the TF300T
Backup apps, app data and files (Recommended, Optional)
Install ClockworkMod Recovery (soon to be replaced with TWRP; I gave in)
Root the TF300T (Optional)
Backup your stock Asus ROM (Recommended, Optional)
Flash a Custom ROM
Backup your working Custom ROM (Optional)
Additional information you should know:
Click to expand...
Click to collapse
This guide has been made with the total android noob in mind. Having only owned an android tablet for a week, I too am an android noob. On the flipside, I'm no noob to hardware and software exploits and modifications. I've tried to make this friendly for any type of noob, but there are a few instances where I expect basic menu and Windows 7 navigation skills.
ClockworkMod Recovery doesn't appear to have a "Shutdown" function, nor does it display current battery level-- for this reason, the recommendation and warning to have a battery charged to at least 60% is extremely heavy. The worst thing that can happen to any device is usually an incomplete flash. Don't let it happen to you-- start charging your TF300T NOW.
I have seen reports that "Fastboot" doesn't work properly on Windows 7 64-bit. This guide addresses that issue, as I also encountered it. If you don't know what "Fastboot" is, in the words of an admirable comedian, "You gonna learn today". Don't worry about it for now!
Your device came with JB-- you didn't miss the bus for NVflash. In your case, the bus never came.
I am not responsible for any damages caused to (but not limited to) yourself or your device.
Even if you think you're pretty good at figuring this stuff out, stick to the directions as close as possible.
If you love tweaks, you're going to love your custom ROMs.
Let's get started!
Unlocking Your TF300T
Click to expand...
Click to collapse
WARNING: Unlocking your TF300T will void your warranty. If your device breaks or fails under normal use, don't expect Asus to pick up the tab! Be aware that once unlocked, it cannot be relocked.
There are two ways you can go about this-- Either download the official Asus unlock utility for Windows or download the .apk and install from your tablet (Asus utility still working! I successfully unlocked mine on JB 4.1.1). I chose to download the .apk and install directly on my tablet, therefore this is the method I will cover.
To download the .apk file, scan the QR Code below with Barcode Scanner (free; on Play store) and open the URL to the Asus Support page for the TF300T. Alternatively, if you are viewing this thread on your TF300T, you may simply tap the code below.
On the Asus Support page, select "Android" as your OS. The page will reload and present you with a list. Click on "Utilities", then after it has loaded, download the Unlock Device App. When it is done downloading, a notification will pop up in the lower right corner. Click on it to install the Unlock tool. You'll also be able to open the app immediately after the install completes-- open it now.
After scrolling to the bottom of the End User Licence Agreement, select the checkbox indicating that you agree to those terms. You should now have access to the slider that will unlock your tablet. Stay connected to your wifi and unlock when ready. The unlock will not work without access to the internet.
If I recall correctly, your tablet should reboot. Just let it do what it wants. After it's done doing it's thing, take this opportunity to make backups! when you and your tablet are ready, we'll continue on to the next step.
Setting Up The Android SDK and Installing ClockworkMod Recovery
Click to expand...
Click to collapse
Perhaps this was the most frustrating part of my experience-- Installing the Android SDK went fine when I could actually find the .exe download. After that it was a matter of getting the drivers for Fastboot working properly. I was able to narrow it down to a problem for users of Windows 7 64-bit.
From your PC, go HERE, scroll down and click on "Download For Other Platforms". Scroll down more and under the "SDK Tools Only" downloads, you should find a download that looks like: "installer_r##-windows.exe" where "##" is the revision number. Download this .exe and assuming Windows is installed on C:\, install it to either "C:\tools\android-sdk" or "C:\android-sdk". If Windows is not installed to drive letter C, replace the drive letter with the correct letter for your system. Do the same when following the command prompt examples that follow.
Open the Android SDK Manager. Search for "SDK Manager" in the start menu and you should find a result with the same name and a little android icon. Once it's open, you'll be presented with a list. Check the box next to the "Tools" folder, then expand the "Extras" folder and check the box next to "Google USB Driver". In the lower right corner, click "Install packages...", agree to all when ready and begin your downloads.
In the settings application of your tablet, go to the "Developer options" tab near the bottom. Ensure that the switch in the top right corner is in the "ON" position, then under the "Debugging" header, enable "Android debugging". Read the following carefully before you continue: Shut down your tablet and connect your USB cable. Hold the power and volume down buttons at the same time. Keep holding until you see a menu. The menu will consist of a few items, among them there is "RCK", a USB icon, an Android icon, and a "Wipe Data" icon. Tap volume down until the USB icon is selected, then press volume up. Cross your fingers and hope drivers install automatically.
They probably won't, so have windows look in the \android-sdk\extras\ folder. It should say the drivers installed successfully. Either way, open the start menu, and right click on "Computer". Click "Manage", then in the left hand pane of the new window, click "Device Manager". The "Other Devices" section may be already expanded in the center pane. If it is, look to see if "Fastboot" appears in that section with a yellow exclamation mark.
If it isn't there, you shouldn't be worried-- check for a section called "Android Phone" or "Portable Devices". Look for a device called "Android ADB Interface" or "Fastboot". It shouldn't have a yellow exclamation mark next to it.
In the event you have the device appearing with a yellow exclamation mark next to it, go HERE and download PdaNet. This was my remedy for this error. Unplug your TF300T from your computer and install PdaNet following instructions. During the install a warning will appear to install unsigned drivers. Install the driver anyway, and let the installation finish. You can now plug your TF300T back in, and it should be recognized automatically. Just in case, hold the volume down and power buttons again until your tablet restarts and you see your hidden menu again. Once again, tap volume down until the USB icon is selected, then press volume up again to select it. Check the Device Manager again and you should find the "Android Phone" section at the top. Within it, you'll find a device called "Android ADB Interface".
Now that we have your tablet and computer set up nicely, we can finally install ClockworkMod (CWM) Recovery. Go to THIS thread and download the attachment called "recovery-jb.img" (thanks XpLoDWilD!). It is VERY important that you download "recovery-jb.img" as this is the version for users with Jelly Bean bootloader!
Rename the file you just downloaded to "recovery.img" and place it in \android-sdk\platform-tools . In Windows 7, open the Start Menu and search for "cmd". You should see a result called "cmd.exe". Right click that result and click "Run as Administrator". Now type the following commands into the new command prompt window in order to flash CWM Recovery:
Code:
cd C:\tools\android-sdk\platform-tools\
fastboot -i 0x0B05 flash recovery recovery.img
DON'T unplug your tablet!! Don't close the window either! Wait for the command prompt to finish what it's doing, then you can type the final command:
Code:
fastboot -i 0x0B05 reboot
Your tablet will reboot. Once it has fully rebooted, shut it down and hold volume down and power again to access our tablet's hidden menu. This time, instead of selecting the USB icon, select "RCK" and press volume up. If I'm not mistaken, "RCK" stands for "ReCovery Kernel". ClockworkMod Recovery should load up. If it doesn't, then you were not successful in flashing CWM. If it does, then you can go to the Backup and Restore menu and create a backup.
I was overconfident when I went through all this, and I didn't make a backup-- for me, I wasn't able to get my SD card detected (64GB fat32), but even in this case you should be able to make a backup to your "Internal SD card". Unfortunately, you are on your own for this step. Make sure that you transfer this backup to your PC after creating it. You may need to disable Developer options in your TF300T's settings before you can transfer files over again.
In THIS post, XpLoDWilD gives instructions on how to Root your tablet. If I'm not mistaken, this applies to users who are using a ROM that does not already have root. If you care about Root right now, you can go ahead and flash his attached .zip file using CWM to your TF300T.
When I did this, I selected the .zip file with CWM and then went back to the main menu to select reboot. CWM then prompted me that it needed to fix permissions in order to keep Root. I tried it both ways-- first I let it fix permissions, then used a Play store app to check for root. Test came up negative, so I tried again without allowing it to fix permissions. Negative again. I tried again, allowing it to fix permissions again and then left it alone. If you are successful in rooting your TF300T, you can use Titanium Backup to backup your device later. However I used an app that did not require root that worked fine. The choice is yours.
Flashing a custom ROM
Click to expand...
Click to collapse
Now it's time to find a custom ROM to flash. For my guide I will cover Baked TF300T Blackbean #6-- Based on CyanogenMod10, and quite a nice upgrade from the stock ROM. The only downside I found is the Asus App Backup application is not included and cannot be installed. I'm unsure why this is the case-- I have even attempted to install it via CWM with no success. If you need this app or the App Locker app, I suggest you choose a non-CM10 ROM. You are on your own in deciding an alternative, but I have heard great things about CleanROM and I seem to recall reading that these incompatible Asus apps work on it. Don't take my word for it-- do your own research to make sure!
It should also be noted that ROMs like Blackbean #6 have some potentially dangerous settings that can make a power user salivate profusely.
Spiderman's Dad said:
With great power comes great responsibility
Click to expand...
Click to collapse
Okay, so it was his uncle, whatever. But either way, if you're going to install this ROM (or any other with overclock tweaks), BE CAREFUL when selecting different settings for CPU speed and overclocking. I used to overclock my PC as a hobby and pushed a 1.8GHz CPU to 2.77GHz on air cooling.. The thing I learned in the process is if you don't have the proper settings, your computer becomes unstable and weird things start happening. Data corruption, clicking the Start Menu does something crazy and unusual, PC crashes randomly, etc... Some of these errors are due to insufficient cooling-- a problem you cannot remedy when working with a portable device.
Assuming you are new to this tablet like I am, use this rule of thumb when dealing with foreign and potentially dangerous things: DON'T TOUCH IT until you understand it. Then when you understand it, understand it again. Then when you feel you've understood it twice, take baby steps. It's like jumping up a cement set of stairs-- you're definitely not going to try to jump five steps in your first attempt, unless you want to risk smashing your face and bloodying yourself up. Take it one step at a time-- make sure you can land on your feet before deciding to go further.
There's a lot of other options Blackbean #6 has that the average user can still appreciate, so ignore those overclocking/CPU stuff and focus on the other tweaks. Nova Launcher is included and is pretty sweet. I upgraded to Nova Launcher Prime and feel it's worth the extra $4, but I'll leave that for you to decide. There are more options than merely Nova Launcher alone, and not all of them have a price tag.
Without further adieu, let's download the Blackbean #6 ROM and Gapps. Head over to THIS official release thread for the downloads. The names of the files you want are:
baked_tf300t_blackbean-6_jb-bl_b6.zip
gappsinverted-jb-20121029-signed.zip
Put them into a folder called "bb6" and copy the folder over to your TF300T. If your SD card is working in CWM (from CWM, go to the "mount" menu and try to mount SD card), copy the folder to your SD card.
NOW is the time to do any final backups before your fresh ROM install! I recommend "App Backup & Restore" on the Play store. If your tablet is rooted, you can also use Titanium Backup. Both will work fine, though generally speaking people seem to prefer Titanium Backup. People also seem to prefer TWRP over CWM, but I personally find the design unappealing. More importantly, I could only find a proper guide on installing CWM on a factory flashed JB TF300T.
Once you've made your backups, don't do anything until these backups are safely transferred to your PC! Don't forget to backup your music, movies and photos...
Now that you're 100% confident you've made all the backups you need and your battery is well charged and ready to go, let's flash your custom ROM! Shutdown and enter our hidden menu you should be very familiar with by now. Boot into CWM (with RCK icon from hidden menu selected, press volume up), then press volume up/down to navigate.
READ THE FOLLOWING SECTION BEFORE DOING ANYTHING ELSE:
Select "install zip from sdcard" and tap power. If you placed your "bb6" folder on your SD card, tap the power button once more. If it says "Can't mount /sdcard/" in the bottom left corner, then select "choose zip from internal sdcard" and tap power. Earlier you should have put your ROM and Gapps in a folder called "bb6". If you can't find this folder in either the SD card or internal SD card locations, GO BACK, reboot, and make sure you put the folder on your TF300T or your SD card. You should also make sure that the ROM and the Gapps file are inside that folder as well. Do NOT unzip them! They are just fine as they are. We are NOT flashing the ROM and Gapps yet, we are merely making sure they are there before you wipe your tablet. If the files are there, go back to CWM's main menu.
Select "wipe data/factory reset" and tap the power button. Confirm that you want to wipe, wait for it to finish.
Now select "wipe cache partition" and press the power button. Confirm that you want to wipe, wait for it to finish.
Go back to the main menu and select "advanced" and tap power, then select "wipe dalvik cache" and tap power. Confirm that you want to wipe, wait for it to finish.
Don't worry! Your ROM and Gapps should still be in your bb6 folder. Navigate to "install zip from sdcard" again, and let's make the magic happen. We are going to install the ROM first, then install Gapps. Only after both the ROM and Gapps are installed will we reboot our tablet.
So select the ROM first, confirm that you want to install, wait for it to finish. This one will take a long time compared to the Gapps. Just be patient and wait, even though it looks like it's not doing anything.
Then select the Gapps, confirm that you want to install, wait for it to finish.
Finally, reboot your tablet and cross your fingers. You should be greeted with the sweet victory of the startup animation. Go through the first time setup routine, and make sure the tablet works. From here you can optionally backup your custom ROM, but I recommend getting your settings the way you like them before you backup.
Give yourself a pat on the back--you survived! Hope this guide helped someone out-- I was able to sort through my problems fine, but I felt it important to share my experience. I know I couldn't have been the first to hop through these hoops anyway.
Congrats on your custom ROM Transformer Pad. Enjoy your tablet.
P.S. Questions? Comments? Suggestions? If you have any of the three, feel free to share! If it's a suggestion, please PM me and I'll see about making edits to my guide. All are appreciated, and especially anything that clears up any uncertainties I've expressed.
Special thanks (individuals and groups I owe credit for my process):
Drgravy, Team Baked, and everyone who wrote code that was used in the Blackbean ROMs. Blackbean #6 is my first custom ROM, and so far it's been great!! Keep up the awesome work!
XpLoDWilD, for CWM Recovery + Root on TF300T. These files and instructions were the major keys in making my endeavor a success
I also want to send out a big thank you to every other individual and team who has released a custom ROM for the TF300T-- admirable work, and far more than I could ever do. Thanks for giving us options and making us excited to have a customized tablet!
(....And many more! Currently in finals week (yikes) and can't recall everything right now-- will add more as I remember)
It's a shame that such a well written guide has so little thanks. Have mine.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Very nice. hopefully this helps people just getting the tf300.
note, if you want to install TWRP recovery instead, your command will change accordingly, just make sure you type in the exact file name you want to flash. so if your recovery file is named twrp.blob:
fastboot -i 0x0B05 flash recovery twrp.blob
Thanks!
Your guide helped me a lot. I had problems only with root. Flashed 4 times, but always got "no root acces". Finally, I downloaded root package from here http://forum.xda-developers.com/showthread.php?t=1845377 and it works well
is there any way around that "unknown error..." when i try to use the unlock app yet?
I keep trying but the same error message keeps coming up
sq1ne said:
is there any way around that "unknown error..." when i try to use the unlock app yet?
I keep trying but the same error message keeps coming up
Click to expand...
Click to collapse
Is your tf300 new? first hand? or have u ever sent it to asus for repair before?
Well written, well thought out instructions. Many, many thanks!! I'm still having some trouble though. I get stuck once I download the unlock app, open it, agree to the EULA, then another warning appears that is a black screen white text and a yellow triangle. Nothing happens after that. There are no buttons to agree, no checkboxes, nothing happens. Any advice?
*UPDATE* Figured it out. Be sure to sent the font in settings->display->font size to small, then you will see it. The large font pushes the agree button off the bottom of the screen.
It would be great if CWM in this OP were replaced with TWRP. Many are having issues with CWM. Me being one of them. I flashed TWRP with fastboot and no more problems!
I agree with the post above. Sad that such a well written post has so little thanks. :good:
thnx for this amazing guide, but I am still unsure of this guide will work for me.
I am from Holland (Europe)
specs from my ASUS Transformer TF300T:
Android 4.1.1
Kernel 3.1.10 ([email protected])
Buildnr JR003C.WW_epad-10.4.2.18-20121122
Pad EC Version PAD-EC20T-0216
My question is...will this guide also work for me? ...since I have JB 4.1.1 & build 10.4.2.18
I am also worried about the fact that this guide in for an american(?) transformer I gues...so do I need other files then the files mentioned?
I would love to have ROOT and install a custom rom and remove bloatware etc.
thnx for the help in advance!
Thank you so much, perfect for so many people here.
Can you edit it with TWRP? I would use this right now but as above poster said there have been issues with CWM so don't want to try it.
P.s. i got mine from groupon too
Tamaskan said:
Is your tf300 new? first hand? or have u ever sent it to asus for repair before?
Click to expand...
Click to collapse
bought mine brand new just this past Black Friday.
updated to .18 firmware
I don't want to have to send it in.
GodfleshNL said:
thnx for this amazing guide, but I am still unsure of this guide will work for me.
I am from Holland (Europe)
specs from my ASUS Transformer TF300T:
Android 4.1.1
Kernel 3.1.10 ([email protected])
Buildnr JR003C.WW_epad-10.4.2.18-20121122
Pad EC Version PAD-EC20T-0216
My question is...will this guide also work for me? ...since I have JB 4.1.1 & build 10.4.2.18
I am also worried about the fact that this guide in for an american(?) transformer I gues...so do I need other files then the files mentioned?
I would love to have ROOT and install a custom rom and remove bloatware etc.
thnx for the help in advance!
Click to expand...
Click to collapse
Yes, it will work, I've tried it. But i suggest you use TWRP custom recovery though. CWM has high chances of getting bricked.
Tamaskan said:
Yes, it will work, I've tried it. But i suggest you use TWRP custom recovery though. CWM has high chances of getting bricked.
Click to expand...
Click to collapse
Could you also please add a NOOB tutorial for installing TWRP Recovery (this forum is very confusing in getting the right tutorials / avoiding outdated tutorials which would brick my TF300T etc)?
Example:
quote from XDA forum in TWRP topic: "The fastest and easiest way to install TWRP is to use the GooManager app" <--- GooMnager needs ROOT so I can't use this method?
My ASUS TF300T is completely untouched & unrooted still and don't won't to mess it up.
GodfleshNL said:
Could you also please add a NOOB tutorial for installing TWRP Recovery (this forum is very confusing in getting the right tutorials / avoiding outdated tutorials which would brick my TF300T etc)?
Example:
quote from XDA forum in TWRP topic: "The fastest and easiest way to install TWRP is to use the GooManager app" <--- GooMnager needs ROOT so I can't use this method?
My ASUS TF300T is completely untouched & unrooted still and don't won't to mess it up.
Click to expand...
Click to collapse
www.mediafire.com/?7v1gwbbzqzvzto7 <- fastboot and twrp, the twrp is out dated so if you want you can download new one from twrp website.
2)Extract the recovery with fastboot files zip and open a command prompt in the same folder of the adb and fastboot files (you must click the fastboot and adb when extracred and i suggest you put your extracted fastboot and recovery zip in C:\(foldername) and then open cmd)
3) Reboot into the bootloader of your tablet, type: adb reboot bootloader
4) When your tablet has reached the bootloader navigate with volume down to the usb icon and press volume up to confirm.
5) To flash the recovery type:
fastboot -i 0x0b05 flash recovery tf300t-jb.blob
Credits to krabappel2548.
Tamaskan said:
www.mediafire.com/?7v1gwbbzqzvzto7 <- fastboot and twrp, the twrp is out dated so if you want you can download new one from twrp website.
2)Extract the recovery with fastboot files zip and open a command prompt in the same folder of the adb and fastboot files (you must click the fastboot and adb when extracred and i suggest you put your extracted fastboot and recovery zip in C:\(foldername) and then open cmd)
3) Reboot into the bootloader of your tablet, type: adb reboot bootloader
4) When your tablet has reached the bootloader navigate with volume down to the usb icon and press volume up to confirm.
5) To flash the recovery type:
fastboot -i 0x0b05 flash recovery tf300t-jb.blob
Credits to krabappel2548.
Click to expand...
Click to collapse
Here is a little update on my progress...
- I unlocked the bootloader of my TF300T
- I managed to install latest TWRP
- Made a (COMPLETE) backup of the untouchedl system with TWRP <--- DO THIS BEFORE ANYTHING ELSE!
- Rooted the TF300T with the WW file in this topic: http://forum.xda-developers.com/showthread.php?t=2033205 <----works awesome!
- Made a second (COMPLETE) backup of the now ROOTED system with TWRP
- Tried installing the latest "Cleanrom 3.01 Inheritance", but got the infamous "bootloop" too...the rom has been pulled down from the forum till that is fixed ( I thought I had done something wtong flashing a custom rom, but actually a lot of others had the same problem)
- Waiting for a "bootloop fixed" Cleanrom Inheritance 3.02....and gonna try flashing it again.
first of all thanks a lot ive been going crazy looking for this!! my question is will it work for me?
i bought my tf300t in sept with ics and upgraded to jb....
also i tried this not to long ago and ran into a problem after i unlocked
so right now its just unlocked but not rooted do i need to reverse that or what?
my apologies im extremely noob haha
GodfleshNL said:
Here is a little update on my progress...
- I unlocked the bootloader of my TF300T
- I managed to install latest TWRP
- Made a (COMPLETE) backup of the untouchedl system with TWRP <--- DO THIS BEFORE ANYTHING ELSE!
- Rooted the TF300T with the WW file in this topic: http://forum.xda-developers.com/showthread.php?t=2033205 <----works awesome!
- Made a second (COMPLETE) backup of the now ROOTED system with TWRP
- Tried installing the latest "Cleanrom 3.01 Inheritance", but got the infamous "bootloop" too...the rom has been pulled down from the forum till that is fixed ( I thought I had done something wtong flashing a custom rom, but actually a lot of others had the same problem)
- Waiting for a "bootloop fixed" Cleanrom Inheritance 3.02....and gonna try flashing it again.
Click to expand...
Click to collapse
i never backup.... I only backup app using titanium backuo, if something on the rom goes wrong i just reflash latest firmware from asus website. If you like custom roms, i suggest you use Energy Rom if you want OC or Hydro rom if you want just modified stock rom with better performance.
I have a problem while I try to run the flash recovery command. I have done all steps prior to this.The only difference I see is in device manager I get "ASUS Android Devices". Now, the error I am getting comes after trying to run the command, I get "error: cannot load 'recovery.img' No error" . I have also tried the pdanet solution. Thank you for your help in advance.
Stupid question... but I am going to ask it. Having never rooted my TF300 it is on latest firmware will this guide still apply to be even though I bought my device running ICS but have updated to latest firmware? Have never rooted tablets before so all new to this.
Agera said:
Stupid question... but I am going to ask it. Having never rooted my TF300 it is on latest firmware will this guide still apply to be even though I bought my device running ICS but have updated to latest firmware? Have never rooted tablets before so all new to this.
Click to expand...
Click to collapse
It will work as long as you are using Jelly Bean
so i recently got the 2012 nexus 7 from my step daughter she wasnt using. i replaced the usb port cause it was messed up. im trying to root it and im following some guides and it says to make sure usb debugging is checked but i cant find it. im on 4.4.4 latest one and cant find it at all anyone shed some light on it please
nvm got it
still cant get the dang thing to root. i got recovery in there and everything but when i go to super user it says no su binary installed
ok i cant find anything can someone point me in right direction ive tried a couple different ones and none work
Hey man,
Use search in future, please
But here's what you need. I did this with my "virgin" Nexus 7 2012 (virgin by means, it ran over 1 year stock).
http://forum.xda-developers.com/showthread.php?t=1741395
But in step 4, instead of CWM, i flashed TWRP recovery, because I like it more. Process remain the same.
But PLEASE ! Read before you attempt to do anything.
I did search for like 3 hours trying to find something that would work with 4.4.4 and never came across this but thank u I'll take a look. I already have it unlocked and clock work instilled but I guess I can't get super user to install. I'm not sure
bjballar41 said:
I did search for like 3 hours trying to find something that would work with 4.4.4 and never came across this but thank u I'll take a look. I already have it unlocked and clock work instilled but I guess I can't get super user to install. I'm not sure
Click to expand...
Click to collapse
Hi, bjballar41...
Rooting the Nexus 7 is a piece of cake... well, I think so anyway.
Essentially, it's a three stage process...two of which you've already accomplished.
1) Unlock the bootloader. Check... YOU'VE DONE!
2) Flash a Custom Recovery. Check... YOU'VE DONE! (ClockWorkMod installed).
*****
3) Using that Custom Recovery, flash ChainFires SuperSU root package. YET TO BE DONE...
-----------------------
Here's how...
The third piece of this jigsaw can be found here...
http://download.chainfire.eu/567/SuperSU/UPDATE-SuperSU-v2.13.zip
Using Chrome (or whatever Android browser you favour) download it directly to your Nexus 7.
Chrome, and most Android browsers, download stuff to the /download folder on your device. Wherever it gets downloaded to, it's important that you take note of it's location.
-----------------------
Next, boot into your Custom Recovery (CWM), as follows...
** Fully shut down the device.
** With your N7 shut down... press & hold the VOL DOWN button... whilst holding, press POWER ON.
** Your N7 should now boot into the bootloader.
** Using either of the volume buttons, cycle through the options until you see the RECOVERY MODE option. Press the Power button to select it.
** Your Nexus 7 should now boot into your Custom Recovery, CWM.
** From the the CWM menu options, select the following...
- install zip
- choose zip from /sdcard
- select 0/ from the menu option
- navigate to the folder where you downloaded the UPDATE-SuperSU-v2.13.zip file to earlier
** Select it, and confirm... YES - Install UPDATE-SuperSU-v2.13.zip.
** Then tap Go Back (at the bottom) followed by Reboot System Now.
** Ignore any 'Fix Root messages'... this is a spurious CWM error message. Ignore it, and just proceed with a reboot.
-----------------------
Your Nexus 7 should now be rooted. ...hopefully...
I've just run this exact procedure on my Nexus 7, and I had no problems at all.
You can check you have root via a plethora of root checking tools available on PlayStore, or just by installing and running Titanium.
Good luck, and hope this helps.
Rgrds,
Ged.
That worked thanks. Any suggestions on a custom rom
bjballar41 said:
That worked thanks. Any suggestions on a custom rom
Click to expand...
Click to collapse
I would recommend you to convert to f2fs and use ART.
Try slimkat(all-f2fs) its fast and never slows down even after a month and tons of apps.
For playing around you can try Liquid smooth or Mahdi.
What do I have to do to convert to f2fs? Im so rusty I haven't put a ROM on since galaxy s2
ive been seeing enough and more posts asking about flashing OxygenOS. I'll try and explain in simple terms. read carefully and only then try it.
I TAKE NO RESPONSIBILITY IF YOU SPOIL YOUR DEVICES. YOU ARE DOING THIS AT YOUR OWN RISK!
if you have a custom recovery skip to step 7
1. Your devices needs a custom recovery. to install one you need to be rooted. to root u need an unlocked bootloader. OnePlus claims that you wont loose warranty on rooting and unlocking so your safe there unless u do something wrong. so be cautious.
2.for unlocking rooting and flashing i recommend using Bacon Root Toolkit. even though i know to do it the Oldschool way. this is much more simple and u really cant go wrong with the toolkit its NoobFriendly. download the toolkit from the following link and install it along with the drivers. http://www.wugfresh.com/brt/
3. once installed choose the version of CM you are running. the toolkit will automatically download all required files. once in u will have to set up the drivers. the instructions for that are well explained in the toolkit please follow it there.
4. after the drivers are set up first u need to unlock. REMEMBER UNLOCKING WILL CLEAR ALL DATA!. so backup all required data.for the internal SD card u can connect the phone to the computer as an MTP device and copydata, for the apps you can backup using Helium and copy the helium folder to the computer. please do not post comments telling that you lost all data there is NO WAY to recover that data once you unlock.
5.press UNLOCK in the toolkit, it will guide you through the process. after unlock when you switch on the phone itll be as good as new you will have to go through the procedure of logging into google etc. once done head over to settings enable developer options and tick ADB. DONT FORGET TO DO THIS
6. Now you need to root your device. by default the toolkit uses SUPERSU to root and TWRP as custom recovery its perfectly fine unless you intend on changing it later on stick to these two. remember to tick CUSTOM RECOVERY under the root option. press root and follow the steps. it pretty much does everything u jut have to keep confirming.
7. Hoping that right now your rooted and have a custom recovery, if not please go through the previous steps.
now we need to download the oxygenOS head over to the forum and download or use this link https://oneplus.net/oxygenos, once downloaded check the size it should be 705MB incase its not the download again may be the download got corrupted.
8. IMPORTANT STEP FOR NEWBIES
once u download u have ONE .zip file named "oxygenos_1.0.0.zip" extract that file and u will get a folder named "oxygenos_1.0.0" leave it there DONT EXTRACT ANY FURTHER!. the folder will contain two files "oxygen_1.0.0_flashable.zip" "oxygen_1.0.0_flashable.md5" leave them as they are. preferably copy this folder containing the two files to the root of the phone. in simple terms put it in your phone memory without putting it into any other folder.
9. Now you have your files ready you need to head over to the recovery. two ways of doing it. you can go to settings developer options and tick advance reboot. now when u press reboot u get an option to reboot recovery and bootloader. choose recovery.
another way of getting to recovery is shut down the phone hold the buttons POWER+VOLUME DOWN once the phone comes on leave the power button and hold VOLUME DOWN till the recovery shows up.
10. Once your in TWRP u have an option to backup your rom. You could do this as a precaution if anything goes wrong u can restore from this backup file. fro backing up press backup and choose the partitions you want to backup and swipe to backup. the backup should be around 2-3gb i think. once backed up copy the file from the TWRP folder on your phone to the computer.
11. since you are changing the ROM completely you need to factory reset once before flashing. in TWRP press WIPE and swipe to factory reset. and go back to home dont reboot device.
12. FLASHING THE ROM: in TWRP press install in the list find the folder oxygenos_1.0.0. in that folder click on the file "oxygen_1.0.0_flashable.zip" and then swipe to flash. the flashing can take a while dont do anything while its in progress.
13.once flashed reboot system. the first reboot will take time let it happen do not get worried and try restarting just let it take its time it has to set up everything for u.
14. Now you should be having OXYGEN OS... use it appreciate it rather than criticizing it. incase u feel like customizing it try out XPOSED. though it is still in testing for L it shouldnt be too buggy. gravityBox is compatible with lollipop.
15. incase you feel like going back to CM.. head over to the toolkit connect the phone (remember to enable ADB) doesnt matter which build u set. press FLASH STOCK+UNROOT choose the CM build you want and let it do its work. follow the instructions.
some may point out that the toolkit has an option to flash the rom as well. yes it does but i wont dive into that now. this method is simple enough. but if u know how to do it that way u sure can
PS: KEEP YOU BATTERY FULLY CHARGED WHILE DOING ALL THIS. INCASE THE PHONE DIES WHILE FLASHING ITLL BE BRICKED.
please correct me if i went wrong anywhere.
hope this helps.
shoaib30 said:
ive been seeing enough and more .....
Click to expand...
Click to collapse
There is absolutely no need for this thread - it's all been covered before. Flashing OOS is no different to any other custom ROM.
You text/formatting is abysmal. You recommend using the toolkit, WTF? This device is the easiest ever created for unlocking/rooting and using a toolkit is a BAD idea as if it goes wrong you will end up confused and not knowing what to do next. Anyone who can't unlock / root / flash TWRP on this device should not be attempting to install a custom ROM anyway.
What you have posted is actually more confusing for a 'noobie' than what is already out there, I'd suggest this thread should probably be deleted and people with questions can simply search and find the useful instructions which already exist.
SimonTS said:
There is absolutely no need for this thread - it's all been covered before. Flashing OOS is no different to any other custom ROM.
You text/formatting is abysmal. You recommend using the toolkit, WTF? This device is the easiest ever created for unlocking/rooting and using a toolkit is a BAD idea as if it goes wrong you will end up confused and not knowing what to do next. Anyone who can't unlock / root / flash TWRP on this device should not be attempting to install a custom ROM anyway.
What you have posted is actually more confusing for a 'noobie' than what is already out there, I'd suggest this thread should probably be deleted and people with questions can simply search and find the useful instructions which already exist.
Click to expand...
Click to collapse
im sorry ill take it off. i had ppl asking me in person so i thought i can explain here and send the link to them. my bad
Please don't create duplicate threads. There are already threads open that cover this topic.
Thread closed.