Related
I've tried everything.The phone does not turn on at all,can't go into bootloader or recovery mode,only white LED light on when connected to pc.When i connected it for the first time to my PC (i have the drivers) windows showed "Motorola flash device" and was installing the drivers for it then the phone disconnected,windows was saying "Device unplugged!".Every time i connect it to the PC,nothing happens.If i press the power key,the PC makes that sound that it connects,then after 2 seconds it disconnects.I have to take the battery out and put it back in to make the PC connect to it again,disconnect after 2 seconds.I tried holding volume up and connecting,no luck,RDS does not read the device,tried with "First come first served" mode,nothing.The battery was a bit swollen so i brought a new one,both charged,no luck.The phone is bricked.What can i do?please help!
rammstein_08 said:
I've tried everything.The phone does not turn on at all,can't go into bootloader or recovery mode,only white LED light on when connected to pc.When i connected it for the first time to my PC (i have the drivers) windows showed "Motorola flash device" and was installing the drivers for it then the phone disconnected,windows was saying "Device unplugged!".Every time i connect it to the PC,nothing happens.If i press the power key,the PC makes that sound that it connects,then after 2 seconds it disconnects.I have to take the battery out and put it back in to make the PC connect to it again,disconnect after 2 seconds.I tried holding volume up and connecting,no luck,RDS does not read the device,tried with "First come first served" mode,nothing.The battery was a bit swollen so i brought a new one,both charged,no luck.The phone is bricked.What can i do?please help!
Click to expand...
Click to collapse
had the same problem, the escape was JORDN_U3_97.21.51.........................sbf flashed throw RSD lite.
Mine was green lens DEFY
ovu85 said:
had the same problem, the escape was JORDN_U3_97.21.51.........................sbf flashed throw RSD lite.
Mine was green lens DEFY
Click to expand...
Click to collapse
the problem is that RSD lite does not recognize the phone no matter what i do.any suggestions?
Maybe your battery is dead, try mcgiver
http://forum.xda-developers.com/showthread.php?t=892026
Feche said:
Maybe your battery is dead, try mcgiver
http://forum.xda-developers.com/showthread.php?t=892026
Click to expand...
Click to collapse
charged old battery with universal phone battery charger,nothing.got new battery,nothing.
this happened to me once, rsdlite would not recognise it etc etc. I am not sure how I fixed it, but I did end up getting it working so don't give up.
Try uninstalling and then installing the latest version of rsdlite
Also try and use a different computer.
Try downloading drivers for your defy off the internet - im sure you will find them somewhere
and lastly, use the search function in other threads, maybe someone else has had the same problem...........
I actually had this on saturday night.
I used MacGyver to charge my battery, and just kept using different RSDLite versions until it detected my phone Make sure you're using the right SBF too.. http://sbf.droid-developers.org/umts_jordan/list.php
tried mcgyver,tried other RSD versions,installed defy drivers,still nothing.Disconnects after 2 seconds,before RSD has a chance to read it
rammstein_08 said:
tried mcgyver,tried other RSD versions,installed defy drivers,still nothing.Disconnects after 2 seconds,before RSD has a chance to read it
Click to expand...
Click to collapse
Tell you what, maybe you should jump on ebay and buy another battery? I bought one that comes with a seperate charger. this way you know that you have a charged battery in your device.
Also try a different usb cable? I have so many that stop working or only work when you physically push them in or to an angle.
have you tired a second computer?
naleyb01 said:
Tell you what, maybe you should jump on ebay and buy another battery? I bought one that comes with a seperate charger. this way you know that you have a charged battery in your device.
Also try a different usb cable? I have so many that stop working or only work when you physically push them in or to an angle.
have you tired a second computer?
Click to expand...
Click to collapse
got a new genuine battery from ebay,tried different cable and laptop,same result.my guess hardware problem..also,if phone stays plugged in the USB for 5 minutes or so,the pc makes that connected/disconnected sound again.
me too
I have the same problem with Red lens Defy MB525 . Only black screen and white led when cable connected with PC . Now can using RSD for flash rom but after PASS ( too quickly ) , not anything . Sorry , my bad Englissh .
Any ideas!?
Bé Yêu said:
I have the same problem with Red lens Defy MB525 . Only black screen and white led when cable connected with PC . Now can using RSD for flash rom but after PASS ( too quickly ) , not anything . Sorry , my bad Englissh .
Any ideas!?
Click to expand...
Click to collapse
Possibly trying to flash wrong SBF for your bootloader version?
What other SBFs have you flashed?
Don't worry !
Just flash rom bl7.sbf againts !
Try flash rom BL7
pls help me....defy stuck at black screen....
rsd lite recognises defy through factory cable but while flashing sbf it gives error sending ti rom packets and den it fails.....my stock rom was froyo india.....pls help.....
rahul_saklani said:
rsd lite recognises defy through factory cable but while flashing sbf it gives error sending ti rom packets and den it fails.....my stock rom was froyo india.....pls help.....
Click to expand...
Click to collapse
This may happen when u flash wrong sbf . Here's the link to all sbf's of defy and defy match it and then flash. I too had problems i and flashed this.. I am from india as well send me a pm if you got any doubts would try to help you at the best
Enjoy.!
---------- Post added at 08:55 AM ---------- Previous post was at 08:50 AM ----------
Bé Yêu said:
I have the same problem with Red lens Defy MB525 . Only black screen and white led when cable connected with PC . Now can using RSD for flash rom but after PASS ( too quickly ) , not anything . Sorry , my bad Englissh .
Any ideas!?
Click to expand...
Click to collapse
Ya its comman if u flash wrong sbf....Match the sbfs then flash...Link to all sbf's of defy and defy plus
Send me a pm if u have any doubt
Enjoy
vedang81 said:
This may happen when u flash wrong sbf . Here's the link to all sbf's of defy and defy match it and then flash. I too had problems i and flashed this.. I am from india as well send me a pm if you got any doubts would try to help you at the best
Enjoy.!
---------- Post added at 08:55 AM ---------- Previous post was at 08:50 AM ----------
Ya its comman if u flash wrong sbf....Match the sbfs then flash...Link to all sbf's of defy and defy plus
Send me a pm if u have any doubt
Enjoy
Click to expand...
Click to collapse
RSD Lite recognises my phone:
Status: connected...
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: N/A
DRM Version: N / A
everything is N/A.....wat does it imply? is the motherboard corrupted...hav i lost my defy? every sbf file i try it fails with error... failed flashing processPhone[0000].Eroor sending TIROM packet request API Error: 0xE003009F(0xE003109F);phone connected
pls help me....my defy is dead since past 2 months
rahul_saklani said:
RSD Lite recognises my phone:
Status: connected...
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: N/A
DRM Version: N / A
everything is N/A.....wat does it imply? is the motherboard corrupted...hav i lost my defy? every sbf file i try it fails with error... failed flashing processPhone[0000].Eroor sending TIROM packet request API Error: 0xE003009F(0xE003109F);phone connected
pls help me....my defy is dead since past 2 months
Click to expand...
Click to collapse
N/A doesn't mean ur motherboard is corrupted. Even when i connect it shows N/A..
Try starting everything again uninstalling and installing drivers and rsd. Better switch pc and try.
Sent from my Android lappy
vedang81 said:
N/A doesn't mean ur motherboard is corrupted. Even when i connect it shows N/A..
Try starting everything again uninstalling and installing drivers and rsd. Better switch pc and try.
Sent from my Android lappy
Click to expand...
Click to collapse
i've tried all that bro....is da flashing failing due to wrong sbf? i guess in ur case it shows da bootloader version but mine is n/a for dat too..... which rom shud i try it if i've accidentally tried to downgrade my rom.... actually i'm asking abt motherboard becoz when i took it to da motorolaservice center they said i've to replace da motherboard but i'm out of warranty ........
rahul_saklani said:
i've tried all that bro....is da flashing failing due to wrong sbf? i guess in ur case it shows da bootloader version but mine is n/a for dat too..... which rom shud i try it if i've accidentally tried to downgrade my rom.... actually i'm asking abt motherboard becoz when i took it to da motorolaservice center they said i've to replace da motherboard but i'm out of warranty ........
Click to expand...
Click to collapse
service centre guys dnt pay dat much attention to this.. they always give this comman solution of changing motherboard... a friend of myn had some problem with his galaxy ace he was too told to replace it...
Ryt nw u just got a option to flash as many sbfs as u can... keep the faith one might work.
Sent from my Android lappy
Hello guys,
my friend gave me his defy+. I successfully rooted+flashed a new JB rom on it. He was experimenting something, he started to flash another rom on it, and now the device wont even boot. It does nothing, only it shows a white led when it is connected to the PC. The RSD lite recognizes the device.
Is there any solution to fix this or it should fly in the trash?
edit:
I flashed this rom
DEFYPLUS_U3_4_5_1_134_DFP-231_CEE_ROOTED_No_Signed
now the device starts, gets to the Motorola red logo, but then it goes to a black screen, where are these informations.
Bootloader 9.10
Err 46,69,35,00,27
battery OK
Transfer mode USB
Follow this procedure make it work
Vicsa said:
Follow this procedure make it work
Click to expand...
Click to collapse
Vicsa, the thread is pasted is about defy and materijalmen asked about defy+... will it works?
I am facing the same problem...
i have the same problem on defy mb525 red lens
materijalmen said:
Hello guys,
my friend gave me his defy+. I successfully rooted+flashed a new JB rom on it. He was experimenting something, he started to flash another rom on it, and now the device wont even boot. It does nothing, only it shows a white led when it is connected to the PC. The RSD lite recognizes the device.
Is there any solution to fix this or it should fly in the trash?
edit:
I flashed this rom
DEFYPLUS_U3_4_5_1_134_DFP-231_CEE_ROOTED_No_Signed
now the device starts, gets to the Motorola red logo, but then it goes to a black screen, where are these informations.
Bootloader 9.10
Err 46,69,35,00,27
battery OK
Transfer mode USB
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------------------------------
i rooted and flashed my defy mb525 and after the rsdlite finished and show me the pass its going to be rebooted and shows nothing and does nothing only the white led is blinking by connecting to the pc
please help me
is there a solution or not ?
email me if someone know a solution to solve it thnx [email protected]
Vicsa said:
Follow this procedure make it work
Click to expand...
Click to collapse
Do you maybe have a link for the motorola defy me525 (since the link was bout Defy plus)?
Defy Plus Bricked
Tungieee said:
Do you maybe have a link for the motorola defy me525 (since the link was bout Defy plus)?
Click to expand...
Click to collapse
Hi,
I'm too facing same issue, Did you found any solution ?
Issue is even when connecting to PC phone is not getting detected hence I could not flash it.
hi,
i tryed to update my motorola defy with a .sbf file with RDS Lite and my phone died
only when i connect the phone to charge the white light tuen on that it ...
tryed to get into hard recovery = fail
i dont know what to do please please help me
thanks alot.
1st of all you have to be patient and wait for an answer before opening the same threads
2nd you need to be more specific e. g. what is the model of your defy?
Last but not least, please use the search option to find your answer. I am sure that someone before you had the same problem already.
Maybe this or this will help you, but please take your time and read
This kind of problem was debated on the forum. Take off battery and after you put it on press power+vol+ and after 3 sec release power. From now one proceed according to a guide.
Vicsa said:
1st of all you have to be patient and wait for an answer before opening the same threads
2nd you need to be more specific e. g. what is the model of your defy?
Last but not least, please use the search option to find your answer. I am sure that someone before you had the same problem already.
Maybe this or this will help you, but please take your time and read
Click to expand...
Click to collapse
Tnx for replaying mate & sorry
i got a motorola defy.
tryed what you posted but stil fail cant get into bootloader ...
please help tnx.
:good:
pgreed said:
This kind of problem was debated on the forum. Take off battery and after you put it on press power+vol+ and after 3 sec release power. From now one proceed according to a guide.
Click to expand...
Click to collapse
did like you toled - but stil cant get into bootloader
please help.
the RSD Lite dont reconzie my motorola defy...
tuneon said:
the RSD Lite dont reconzie my motorola defy...
Click to expand...
Click to collapse
What is your problem exactly? I mean, be specific and give details as in what happened and what is the situation? what were you trying to do? at what step this happened?
You need to tell us;
- What did you flashed into your Defy, give us the name of .sbf file(s) you used. All of them.
- What happened when you try booting into Bootloader mode, stuck at logo? blank screen?
- What happened when you try normal boot up, stuck at logo? blank screen? nothing happened?
- You sure your battery didn't drained yet? You can't charge it when your rom isn't ready.
- Did you have external battery charger in handy?
If not, try to preserve your battery juice as much as possible, or you'll need to go McGuyver.
There, be extremely specific or we couldn't help you one bit.
White LED means that your system pass the bootloader and can charge the battery. If you remove the battery, press simultaneously on the power and vol+ put the battery in place and after 3 sec release the power and after the vol+ the system MUST enter in USB SW update and AFTER driver is installed will be recognized by PC/RSD.
tuneon said:
Tnx for replaying mate & sorry
i got a motorola defy.
tryed what you posted but stil fail cant get into bootloader ...
please help tnx.
:good:
Click to expand...
Click to collapse
When I mentioned which model you have, I meant do you have MB525 or MB526, red or green lens? This is important to know if you want to flash an SBF-file! To prevent the future issues, if you're not sure what you're doing - don't do it.
Hello guys, I have a huge problem with my P9 Lite:
- the phone does not start, does not show signs of life, the pc can not see it, it is impossible to enter the download mod, nothing ...
This is P9 Lite, before uploading Nougata about a year ago it was VNS-L21, but after uploading it changed to generic-a15 and instead of CxxBxx it was NRD90m test-keys.
Phone died today after uploading UPDATE.APP, but, I think, for P9 (EVA-L09) because other updates didnt work because of 5% error (on EVA-L09 soft 99% for few minutes and then screen off) ...
Please, help ...
KaJzii2807 said:
Hello guys, I have a huge problem with my P9 Lite:
- the phone does not start, does not show signs of life, the pc can not see it, it is impossible to enter the download mod, nothing ...
This is P9 Lite, before uploading Nougata about a year ago it was VNS-L21, but after uploading it changed to generic-a15 and instead of CxxBxx it was NRD90m test-keys.
Phone died today after uploading UPDATE.APP, but, I think, for P9 (EVA-L09) because other updates didnt work because of 5% error (on EVA-L09 soft 99% for few minutes and then screen off) ...
Please, help ...
Click to expand...
Click to collapse
Hello,
so why you haven't searched for help when you got generic a-15 ??
Now you did a big mistake flashing EVA-L09 firmware.. (you know it's for P9 not for P9 lite)
Hope you will "save" your phone but you have to know exactly what was your model (L21/L31/L23, etc)
cust C432/C185/C02/C55/C605,etc.. and firmware B160/B161/B360/B370/B380,etc.. (mine are/was L31C432B381)
When u sure model and latest firmware u have/had try follow the rollback guide u find in
UNIFIED HELP THREAD.. here's the link
https://forum.xda-developers.com/huawei-p9lite/how-to/unified-help-thread-huawei-p9-lite-t3649152
P.S.: READ CAREFULLY ALMOST TWO (THREE IS BETTER) TIMES BEFORE DO ANYTHING !!!
I think I did somethink like this, flashing oem info from P9.... I waste many time but it's ok now. I've try many way... The first step : drain your battery to 0 % , make your phone unable to start
then plug usb holding power and volume - , you could use fastboot, then, unlock, then flash images from update.... there is many tuto here...i 've use them....
The better advice is from Campobasso :
P.S.: READ CAREFULLY ALMOST TWO (THREE IS BETTER) TIMES BEFORE DO ANYTHING !!!
sonneper said:
I think I did somethink like this, flashing oem info from P9.... I waste many time but it's ok now. I've try many way... The first step : drain your battery to 0 % , make your phone unable to start
then plug usb holding power and volume - , you could use fastboot, then, unlock, then flash images from update.... there is many tuto here...i 've use them....
The better advice is from Campobasso :
P.S.: READ CAREFULLY ALMOST TWO (THREE IS BETTER) TIMES BEFORE DO ANYTHING !!!
Click to expand...
Click to collapse
\
Bro, with more than 0% my phone is unable to start anyway... I cant use fastboot because "waiting for device". I cant enter download mode too.
sorry Dude, say that cause it was the only way to manage my device, I hope the link Campobasso post here may help you
Hello @KaJzii2807
you wrote on UNIFIED HELP THREAD but until now u didn't get any help... i know,
sometimes things won't go as we expect...
Let me see if i can help you make dload rollback method...
You have L21 but some other info needed to do this, like single or dual sim, and very important
i have to know if your CUST is C432 or a branded version like C02 or other...
ASAP i will try to give you OEMinfo.zip + stock rom for your model, maybe you'll be able to unbrick.
Regards
Its Dual Sim, i had NRD90m test-keys, before this i probably had unbranded C432
KaJzii2807 said:
Its Dual Sim, i had NRD90m test-keys, before this i probably had unbranded C432
Click to expand...
Click to collapse
Good afternoon,
first of all dude, install HISUITE for windows and minimal adb and fastboot on your computer
(with windows) u find here on XDA..
Make a try, only a try....
You said phone won't turn on, so try keep vol - and connect to computer with USB cable...
If won't turn on try (even holding vol -) press power button until it boots to fastboot.
Report what's happen when you do this...
Dadditz said:
Good afternoon,
first of all dude, install HISUITE for windows and minimal adb and fastboot on your computer
(with windows) u find here on XDA..
Make a try, only a try....
You said phone won't turn on, so try keep vol - and connect to computer with USB cable...
If won't turn on try (even holding vol -) press power button until it boots to fastboot.
Report what's happen when you do this...
Click to expand...
Click to collapse
Good afternoon!
Unfortunately, phone does not respond for connecting, pressing vol- and power etc. I thikn the phone is completely dead and nothing will turn him on ;(
KaJzii2807 said:
Good afternoon!
Unfortunately, phone does not respond for connecting, pressing vol- and power etc. I thikn the phone is completely dead and nothing will turn him on ;(
Click to expand...
Click to collapse
Do not despair...:fingers-crossed:
The only thing from now is to wait a few weeks hoping that will completely discharge the battery. This should make some sort of wipe. After this try again if phone starts in fastboot mode ..
Without fastboot you can't do anything ...
Wish u the best and fingers crossed.
Hello Guys,
Recently my Moto G5 plus Xt1686 was hard bricked.. Its was showing qhsusb_bulk in pc , i thought blank flash will work . but it was showing waiting for device , i was able to hear rebooting animation sound and i was able to go to fastboot using power key (As screen is completely Black) ... I decided to repair next day . the restarting sound was continously coming. so left it restarting for one night..
The next day i came to know that pc is not recognizing it as any usb device (not even qhsbulk) . i was to able to do anything. The only thing it is showing is that white blinking led. Also I am not able to go to Fastboot or in EDL mode . Thats why i am not able to do anything . The main problem is that i am not able do anything by pc..
Please Guys Help me i am so confused about it ..
Sorry for bad english.
Riderprovider10 said:
Hello Guys,
Recently my Moto G5 plus Xt1686 was hard bricked.. Its was showing qhsusb_bulk in pc , i thought blank flash will work . but it was showing waiting for device , i was able to hear rebooting animation sound and i was able to go to fastboot using power key (As screen is completely Black) ... I decided to repair next day . the restarting sound was continously coming. so left it restarting for one night..
The next day i came to know that pc is not recognizing it as any usb device (not even qhsbulk) . i was to able to do anything. The only thing it is showing is that white blinking led. Also I am not able to go to Fastboot or in EDL mode . Thats why i am not able to do anything . The main problem is that i am not able do anything by pc..
Please Guys Help me i am so confused about it ..
Sorry for bad english.
Click to expand...
Click to collapse
Try connecting to a wall charger
sd_shadow said:
Try connecting to a wall charger
Click to expand...
Click to collapse
I Tried , It's just blinking white led...