What is the Firmware and Build Number for the latest G1 upgrade from Tmobile?
I flashed my phone with the Google ION ROM and under "About Phone" it states:
Firmware Version
1.5
Build Number
CRB43
Mine says the same, and it's the simple OTA cupcake update, I haven't rooted my replacement phone yet, but that's what the build and firmware say.
However, what does your kernel, build, and baseband tell you? ^-^ Those should be different than the official build's
*edited after rooting, forgot that bit. But simply google-image "Official t-mobile cupcake* and you should get screenshots to compare to
What should the stock US G1 with the CRC build show under firmware version,baseband version,kernel version and build?
subguy812 said:
What should the stock US G1 with the CRC build show under firmware version,baseband version,kernel version and build?
Click to expand...
Click to collapse
LOL, no one probably knows because most on this forum are r00ted....
The CRC build should be CRC1, I know that much and the firmware version should be 1.5, I will have to look into the others.
I am rooted too..........but I need to know. LOL
it should read the .19.26 radio as well i believe, i am not sure on any of the other stuff though cause i keep updating daily to new roms. why do you need to know what it should say?? as long as it is unrooted or has never been rooted and shows 1.5 then the rest will come up as it is supposed to, on a non-rooted phone there is no way to change the radio without the entire build being changed or anything else.
I am having some phone issues need to return and want to make sure it is current when I return it!
Model Number -T-Mobile G1
Firmware Version -1.5
Baseband Version- 62.50S.20.17H_2.22.19.26I
Kernel Version- 2.6.27-00393-g6607056 [email protected] #1
Build Number- CRC1
HOPE THATS WORKS FOR YOU =)
This may be a stupid question, but what is the different between the JI6 update and the 2.1 update1?
I just got a replacement phone from T-Mob and it claims to have firmware version 2.1 update1 but the baseband version is JFD.
Or maybe I'm trying to understand what things are in baseband vs. what is in firmware. I assume one difference is that its easy to change the firmware, but that does not help me much.
Thanks
JI6 is latest and 2.1 update 1 is the old version
I really don't know if there was a pre release version 2.1 (without update 1)...
as far as i know, the very first vibrant came with 2.1 update 1 (or JFD), and that's what you have now.
You should get this updated to JI6...
sandstones said:
This may be a stupid question, but what is the different between the JI6 update and the 2.1 update1?
I just got a replacement phone from T-Mob and it claims to have firmware version 2.1 update1 but the baseband version is JFD.
Or maybe I'm trying to understand what things are in baseband vs. what is in firmware. I assume one difference is that its easy to change the firmware, but that does not help me much.
Thanks
Click to expand...
Click to collapse
There are no stupid questions, only stupid answers....
Eclair 2.1 update1 is the stock ROM that comes pre-installed on the Vibrant.
JFD is the launch version of that firmware.
The newest revision of the Eclair 2.1 update1 is JI6 which, I'm sure you've seen a thread or two about, attempts to fix many of the issues users were having with GPS/Sync/etc. If you realllllly wanted to simplify it, and I know this is completely wrong but follow me here, you have Eclair 2.1 update1(JFD). JI6 would essentially be Eclair 2.1 update1(JI6).
Since you've got a vanilla Vibrant, I'd suggest you charge up your phone and head over to the Kies Mini page to grab the JI6 update. Of course you could also wait for the OTA (over the air) update if you felt like it.
Has anyone thats gotten the update posted what the following versions list?
Firmware Version:
Baseband Version:
Kernel Version:
Build Number:
tommyk38 said:
Has anyone thats gotten the update posted what the following versions list?
Firmware Version:
Baseband Version:
Kernel Version:
Build Number:
Click to expand...
Click to collapse
Firmware Version: 2.1-update1
Baseband Version:T959UVJI6
Kernel Version: 2.6.29
Build Number: ECLAIR.UVJI6
hi guys..i owning an atrix 2.3.4 which asia retail version. i try to find it at firmware thread at development there but most of that is 2.2.2. so is that anyway or any place i can find it ? the system info as below
System Version: 45.31.0.MB860.AsiaRetail.en.03
Android Version: 2.3.4
Baseband Version: N_01.100.00R
Webtop Version: WT-1.2.0-133_38
Kernel Version: 2.6.32.9 [email protected]#3
APflex Version:
GAS_ASIA_USAOLYGBSEARET_P011
GAS_ASIA_USAOLYGBSEARET_A003
GAS_ASIA_USAOLYEMSEARET_M001
Build Number: 4.5.2A-74_OLE-31
http://www.filefactory.com/f/89f588286a560e39/
hmm..i just see the me retail only..is this the full sbf?
Am also from asia- manila.. im using an at&t us version atrix. Id recommend a cwm flashable firmware instead of an sbf based firmware. Running on cm7 nightly
Sent from my MB860
chonkit said:
hmm..i just see the me retail only..is this the full sbf?
Click to expand...
Click to collapse
There's a SEA-Retail sbf in there. Look for the one that ends with "-searet". And yes, it's the full stock sbf.
As has been warned many times in this forum, if you don't know what you're doing, DO NOT flash an sbf. It might brick your phone. Although 4.5.2A is the latest version for SEA (which means it should be safe - bricking only occurs when downgrading), I'd still recommend caution.
i c..so after i unlocked and flash custom rom, can i use this sbf to back to stock and perform ota? or after unlocked bl, i could not use ota if it is available..
Sent from my MB860 using XDA
You can use that to go back to stock, but only if you were on the same/earlier build. Do not use sbf to downgrade.
hmm..ok..mean that if i flash custom rom from 4.5.2A version of 2.3.4, if wan to go back stock, i only can flash this 4.5.2A sbf to get back to stock rite?
bigboy_r said:
Am also from asia- manila.. im using an at&t us version atrix. Id recommend a cwm flashable firmware instead of an sbf based firmware. Running on cm7 nightly
Sent from my MB860
Click to expand...
Click to collapse
i c..but i using international asia version..
chonkit said:
hmm..ok..mean that if i flash custom rom from 4.5.2A version of 2.3.4, if wan to go back stock, i only can flash this 4.5.2A sbf to get back to stock rite?
Click to expand...
Click to collapse
Yes.
that's nice..thank for the answer..by the way, can I still update to official ics through ota update if Motorola release it using this sbf? it won't brick my device right?
You *should* be able to update from stock ROM, but since official ICS isn't out yet, we still don't know if Moto changes anything in their update policy. They could in theory prevent the updates to be installed on unlocked devices.
In any case, when the official update hits, I'll bet the devs are gonna be all over it anyway...
ok..maybe i will just unlocked it and use because i not sure when is ics will release for international version..thanks for help ya..
ICS has only been confirmed for US (AT&T) devices. Other regions are still "under evaluation". Seeing how the US version is currently on 2.3.6 and other regions on 2.3.4, I wouldn't bet on Motorola releasing ICS internationally unless there's a huge pressure from users like with Milestone's Froyo update.
so there might had chance that international version might not get the ics upgrade?
Yes. Looking at Motorola's update history, there's a chance that the international version won't get ICS (at least officially).
i see..but motorola update schedule listed the asia retail as ics upgrade in planing. so it might fail during the process?
From Motorola's Upgrade News:
PHASE 1 – EVALUATION & PLANNING: During this phase, we evaluate the benefits, technical issues and user experience of an upgrade. Generally, we are not able to provide release dates in this stage. There are also some cases in which we can state that an upgrade will happen but are not able to provide a release date. Please note that some products that enter the Evaluation and Planning phase may not complete the upgrade cycle.
wow..seriously speechless..but then never mind. if its fail, I still can grab custom rom that based on at&t ics right?
Yes. I do hope we get an official ICS release, though.
Here's what I got:
Baseband: p6800xxla1
Build number: htj85b.zsla2 p6800zsla2
Any ideas?
Sent from my GT-P6800
I get the same thing. I'm not sure if my radio is supposed to be ZSLA2 as well.
I installed the ZSLA2 firmware from the official firmware thread. The tab never finds any updates even though it did when I first bought it (was on ZSLA2 originally too) and Kies said it's not compatible with firmware updates.
I think the baseband version may be the same. Other than not updating officially, have you had any problems? Im surprised to uave gotten my device and it was already rooted, debloated etc. I pit cwm on it and backed it up first thing.... but have been hesitant to flash roms until I can successfully get this thing back to stock. Having trouble getting mms to work. In the US and had to import this model. Wanted it over the verizon version for telephonics and the original samsung processor.
To what degree does it matter what firmware version you use? Been reading through the firmware thread and have only found partial answers.
Sent from my GT-P6800