is there an option to enable volume boost while on a call , my s3 used to show a small speaker icon when on a call , and it would enable volume boost.
but i cant seem to locate an option on the s4.
ex-28 said:
is there an option to enable volume boost while on a call , my s3 used to show a small speaker icon when on a call , and it would enable volume boost.
but i cant seem to locate an option on the s4.
Click to expand...
Click to collapse
Go to music app. Menu adapt sound. Set it up and there should be a stereo button in call after.
in the dialer, under call setting, under personalize call sound choose clear sound. then when in a call next to the HOLD button( to its right) there will be am extra volume button.
Thank you :-$
Sent from my SGH-I337M using Tapatalk 2
Related
i use O2 xda flame
i wanna it automaticly adjust the in-call volume to the top when i inputed a number and pressed the "talk"button,Or when a incoming call comes and i pressed the "answer" .
the reason why i need it:my flame(perhapt also yours)'s volume in call is always too small(not at the top) even your vomlue bar is at top.and which is more seriosly,sometimes a call comes,you pressed the answer,and you may hear nothing(but he/she can hear you w/o problem).
the two problem above can be solved by pressing the volume+ key during the call,and as soon as you pressed it,you can hear him/her in highest volume,but....
sounds it's easy,but i need to press it almost every call.i hate doing repeated things.so,is there a software can help me "press" the volume+ key?
check out phone weaver
Using the profile of phone weaver, you can adjust the in-call volume.
1) how do I turn off that damn touchtone sound when I type in a phone number?
2) how can I lower the volume of the call? having it all the way down to zero still is "loud" and everyone can hear the otherside of the conversation. Is there some admin panel or something like the samsung omnia where I enter a combination of keys and it will allow me to adjust volume or something?
1) - settings menu all settings personal phone change keypad setting.
what about the volume of conversations? its soooo loud. volume is all the way to zero and still it makes no difference!
I want to mention this problem though i know it has been questioned previously with no answer.
When during a call you raise the bluetooth headset volume then the phone doesnt remember the setting and you have to raise the volume after the next call and again and again.
Very annoying!!Also raising the bt headset volume then the volume control opens and the ringer sound is raised too and i need to lower it after each call!!
Any solution on this?
Thanks!!
solved it
[HKEY_CURRENT_USER\ControlPanel\Notifications\ShellOverrides]
"SavedInCallVolume"=dword:FFFFFF
This key seems to save the in call volume.
Set to FFFFFF for maximum in call bt headset volume.SOFT RESET.
Works for me, now in each call the bluetooth in call voice is set to max and i dont have to raise it any more.
When for any reason the volume goes down again, click the volume button in the earphone, just to stimulate it, set your prefferred settings for ring volume etc and then soft reset and the high earphone volume is back.
It is not a complete solution, of course, but it is better than having to raise and low the volumes after each call.
Up to now there is not a better solution to this problem.
If someone knows a better registry setting or tip solution he can post it.
Another problem also is that sometimes the last call button is accidentally pushed in the bluetooth earphone and the last call is activated.
I will try to find the setting that disables last call through bluetooth if there is any.
has anyone else tried this? I have this problem with the t-mous version of the hd2.
NIKOSXRI said:
[HKEY_CURRENT_USER\ControlPanel\Notifications\ShellOverrides]
"SavedInCallVolume"=dword:FFFFFF
This key seems to save the in call volume.
Set to FFFFFF for maximum in call bt headset volume.SOFT RESET.
Works for me, now in each call the bluetooth in call voice is set to max and i dont have to raise it any more.
Click to expand...
Click to collapse
if this works you are a life saver I have had this problem for over 3 months now with no answer I will give it a try and answer back!
edit: it works!!!
I've just tried this, and get the following error:
Error : System.FormatException: FormatException at System.Number.ParseUInt32() at System.UInt32.Parse() at RegeditService.RegeditResponse.Send() at httpserv.Services.Service.sendResponse() at RegeditService.RegeditService.Exec() at httpserv.HttpServerWorker.run()
Any ideas?
i entered the value as dec...with total commander you can change in hex also
with this cab that I found here you can restore the original wm sound manager and the HD2 'remembers' the sound volume and keeps it at the highest level even with a bt headset!
NIKOSXRI said:
If someone knows a better registry setting or tip solution he can post it.
Click to expand...
Click to collapse
I know it has been sometime to post in this thread, but I have found a work around.
Go to the market and download and instal the app 'Volume Locker' - its free. Make sure you do not activate it until you adjust the 'in-call bluetooth volume' level to a comfortable level (i usually call me wife, and then adjust the level while on the phone with her). Then before you end the call, go into the app 'Volume Locker' and activate it. Make sure you uncheck the box 'Allow Apps To Override'.
Now, everytime you call out using your bluetooth headset - it will remember your 'in-call bluetooth volume' setting.
I hope this works!
lawalty said:
I know it has been sometime to post in this thread, but I have found a work around.
Go to the market and download and instal the app 'Volume Locker' - its free. Make sure you do not activate it until you adjust the 'in-call bluetooth volume' level to a comfortable level (i usually call me wife, and then adjust the level while on the phone with her). Then before you end the call, go into the app 'Volume Locker' and activate it. Make sure you uncheck the box 'Allow Apps To Override'.
Now, everytime you call out using your bluetooth headset - it will remember your 'in-call bluetooth volume' setting.
I hope this works!
Click to expand...
Click to collapse
There is no "in call volume" setting in volume locker. Which box did you check in order to activate the in call volume?
I use my phone for work, the volume rocker isnt working properly it turns down but not back up. My in call volume is stuck where its at and is set very low, its very hard to hear important phone calls, how can I raise it in the software and or registry??? Im currently using Hyperdroid CM7. THanks for your help.
scottydc said:
I use my phone for work, the volume rocker isnt working properly it turns down but not back up. My in call volume is stuck where its at and is set very low, its very hard to hear important phone calls, how can I raise it in the software and or registry??? Im currently using Hyperdroid CM7. THanks for your help.
Click to expand...
Click to collapse
Download volume + from market
download Audio Manager or Audio Manager Pro from market (free vs paid)
can adjust every volume, create profiles and widgets
OR Remove your phone from your ear > unlock any lockscreen (if you have any) > adjust volume > put phone back to your ear
Hello,
My in call volume is VERY loud, so much so that I'm forced to move my phone away from my face when in a call. I've tried hitting the volume buttons when in a call but they seem to make no difference to the actual volume. Am I missing a setting somewhere?
Thanks!