First, I'm not a noob, so don't answer something like "did you go into download mode" or something like that ok? Thanks.
I just bricked my phone which is on Savie's kernel, Hyperion 8 while multitasking hard. I was converting a batch of MP3s, Downloading a video and listening to music, when it just hanged, when I decided to restart it , i realised that it was bricked. Even worse, Odin can't get it out of brick. Odin can recognize the device, complete the flash sucessfully
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_DXLJ1.tar.md5 is valid.
<OSM> MODEM_S5360_DXLF1.tar.md5 is valid.
<OSM> CSC_S5360_OLBLG1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> param.lfs
<ID:0/003> system.img
<ID:0/003> sbl.bin
<ID:0/003> userdata.img
<ID:0/003> BcmCP.img
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response form LOKE
<ID:0/003> csc.rfs
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
But it just won't boot. I need help, urgent. PWEATY PWEATY PWEASE is there anyone out there?
Can you enter recovery?
If yes, go into CWM and check if you can mount /data.
If you can mount /data, then I dont know what is wrong, but if you cant mount /data, then try this: http://forum.xda-developers.com/show....php?t=2122370
I hope it helps.
Flash stock kernel via odin from
https://hotfile.com/list/2023820/c55629e
wait a while with the cable still attached until it says passed
you should then be able to get into stock recovery
from there flash a temporary cwm
then restore your nandriod backup
Or
Wipe system & data & Flash a cutom rom or deodex stock rom from dev section
Hey thanks for your time... I booted it up the next day without doing anything special.
It was hard bricked, nothing I could do except entering download mode, and even after I flashed Odin successfully it is still bricked. Even weirder, I didn't do anything to brick /un brick it
________________________________
Many people don't get this but,
Being humble is like the "I win" button in your life.
Related
Searched and have tried to fix my issue on here for 2 days now reaching out for help. Rooted my verizon Note 3 SM-N009 running 4.4.2 with safestap and tried to flash a rom from this post http://forum.xda-developers.com/showthread.php?t=2726558. Completly new to rooting and everything. I have downloaded oden 3.07 and 3.09 and get the same problem
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.08.9-hltevzw.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have a nandroid backup to my stock root on my internal sd card. Someone lend me a hand please
Can you boot into recovery? Usually a soft brick is easily fixable. If you can boot into recovery, go to backups and restore and restore your nandroid backup from there.
Sent from my Nexus 4
abealert said:
Can you boot into recovery? Usually a soft brick is easily fixable. If you can boot into recovery, go to backups and restore and restore your nandroid backup from there.
Sent from my Nexus 4
Click to expand...
Click to collapse
He is trying to install recovery..
Lim Wee Huat said:
He is trying to install recovery..
Click to expand...
Click to collapse
Well instead of trying to correct me, help him. Anyway, Samsung's stock recovery has a few extra options. I'm not really familiar with Samsung devices, but I thought that their recovery was pretty close to CWM.. I may be wrong, but I thought I read that somewhere.
I have fixed it now. Just by trial and error. Of. Stock firmware that I have found
When I want to put the PDA file in Odin3 to restore the phone because it does not start I get this error message on the phone "firmware upgrade and tell them issue. Please select recovery mode in kies and try again" I can not use Kies for it is that I entering the wrong model and when I put the PDA file in Odin3 then I FAIL! continuously
HTML:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNC5_I9505HTSFNB1_I9505XXUFNC5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I bet you did a full wipe in recovery?
I bet you did a full wipe in recovery? after that you have to make a full boot into android one time. After that odin will flash if it is the same or a newer version firmware. I have had this problem myself after TWRP full wipe. cant remember if i had to flash a costum rom first? try that if it cant boot. And try to remove phone battery for 30 sec.
Hey guys,
I've been having some issues with an international rom on my W8 and i decided to go back to stock with odin. As i was flashing i realized that everytime i would reboot, even after a factory reset, or data/system/cache wipe, all my file and folders were not erased. So i booted into TWRP and wiped internal SD and all the other stuff, then flashed back stock rom with odin and now i keep getting this error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910W8VLU1ANJ3_N910W8OYA1ANJ3_N910W8VLU1ANJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __Xmit Write fail
<ID:0/003> XmitData Fail..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Click to expand...
Click to collapse
Basically i start flash process and about 30 seconds in i hear the phone disconnect and i get the fail. I know it's not a bad firmware download as i've lready flahsed it 5 times today, i know it's not cable, or USB port because until i wiped internal SD i did not have any issues. Now, i can still access download mode, but i cannot access recovery because it tells me "firmware upgrade encountered an issue. Please select recovery mode in kies and try again." When i connect it to kies, it simply says phone not supported and doesnt show up under emergency recovery.
Anybody know how to get me out of this mess??
weird, my note 4 cable was causing the issue. I took my old S2 cable and it worked. Thanks anyways
TL;DR: My phone is in a bootloop. Attempts to flash back to stock or perform a factory reset haven't worked.
Originally posted on Reddit at r/AndroidQuestions and r/TechSupport. Please forgive me if this is an oft-discussed topic, but I've yet to find anything that's helped me.
A little background: I rooted my Samsung Galaxy s5 (Verizon) in August, 2014. No third-party ROM was installed; just root with Nova Pro, Gravitybox, and Xposed. I had no issues until about 2 months ago when my phone stopped rotating. It'd start rotating again after removing the battery, but eventually that stopped working, too, even in safe mode. I assumed I installed something weird, so I did a factory reset. That didn't fix the problem, though, so I intended to flash the stock ROM for a total reset. Earlier this week, my phone wouldn't connect to wifi. I powered off, removed the battery, and powered back on. And lo, le loop.
Solutions I've attempted:
1) Removing my microSD card. Didn't work.
2) Cache wipe. When I hold the power, home, and volume up buttons, I arrive at this screen. I'm not sure if I can get to the menu shown in the video. Factory reset and safe mode don't work, either. I'm guessing this is because I didn't set up a custom recovery? I'm honestly not familiar with CWM and TWRP.
3) Flash to stock ROM. I did exactly as this guide instructed. I put the ROM on the SD card, then flashed the firmware and kernel. Odin said it was successful and outputted this message (apologies for the wall of text):
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VZW_BOC4_RETAIL_FIRMWARE_ONLY.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> boot.img
<ID:0/003> modem.bin
<ID:0/003> recovery.img
<ID:0/003> rpm.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> sdi.mbn
<ID:0/003> tz.mbn
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> NI2_stock_kernel.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)​Upon completion, the phone just kept rebooting as it had before.
4) Flash to factory ROM. I downloaded the files for my phone mentioned in this tutorial, but they were in this format, so I'm not sure how to run this in Odin (which is looking for .tar, .md5, etc.).
IN CONCLUSION...
Thoughts? Opinions? Questions?
Did I make any mistakes when attempting the solutions above?
If you are collectively baffled, what are my options? My warranty is voided by my root, is it not? Is there an online service that repairs soft bricks for a nominal fee?
Thank you for your time.
Hey guys ive been trying to find a fix for this for weeks now, there has to be a android guru out there that knows how to fix this. but anyways i flashed twrp and rooted my device sucessfully and got the custom rom to install without a hitch and the bootloader is also unlocked. but the issue is that in the new rom i cant get my 4g lte connection to work whatsoever so i decided to go to sammobile and downlaod the stock rom for my device the SM-S902L straight talk galaxy s5. i put my phone into odin mode/fastboot mode and load up the stock rom in the ap slot in odin, i hit start and always get the following error
I really hope you can help me with these. I am begging my data is not lost, I have lots of useful things... Im hoping i wont lose that.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195UBUBNA2_I9195CHOBMK1_I9195UBUBNA2_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
the device reads SW REV CHECK FAIL: [aboot]"Fused 3" > "Binary 2"
Anyone know what these errors mean and what to do?