Related
Appologies for duplicating this post here and on the accessories forum but needed a quick answer!
Anyone technically minded who can answer this....
I am using a HTC Touch Pro mains charger for my X1 (as it has a longer cable) which charges the X1 fully.
I did notice the back of the X1 getting a little warm, so double checked the outputs on the original X1 charger and the TouchPro one.
X1 = 5v 700mA
TouchPro = 5v 1A
Is this likely to be a problem?
You should definately not mix power adapters like that. On the other hand they both use mini-USB plugs so if they follow the USB standard (Battery Charging Specification) you are okay. The spec allows for up to 1,8 A, but that does not mean the X1 can take it.
I would have rather bought an extension cable for the X1 charger. Then you are safe _if_ anything happens and you damage your X1. :|
If you need a longer cable, just plug in a standard USB extension cable It will work perfectly and you can extend to plenty of meters if you need to.
Regarding the use of the 1A charger, I don't think it will be that much of a problem, but I wouldn't count on it to cause no problems either. The battery getting warm is not that odd when charging, as batteries generally generate heat when they get charged. The fact that it gets warmer with the 1A, instead of the 0.7A charger, is just because you charge the battery quicker, which in turn causes more heat. You should keep it mind though that heat is a bad thing for LiIon batteries like the X1 uses. Having it being warm reduces lifetime quicker then when it's cool.
maedox said:
You should definately not mix power adapters like that. On the other hand they both use mini-USB plugs so if they follow the USB standard (Battery Charging Specification) you are okay. The spec allows for up to 1,8 A, but that does not mean the X1 can take it.
I would have rather bought an extension cable for the X1 charger. Then you are safe _if_ anything happens and you damage your X1. :|
Click to expand...
Click to collapse
Thanks for your help. I assumed - like you - that USB was USB in regards to power output. But I will take your advice and get an extension and stop using the old one.
Cheers
.
What I've seen on battery charging on mobile phones is that they have an internal intelligent charging system, at least the Siemens and Wavecom systems I've been using.
LiIon batteries are normally charged using constant voltage/constant current until a certain voltage level is reached, ~4.2V for 3.6V batteries. Then the charge current is reduced with a constant voltage until the charging current reaches zero. This implies that from a 5V charger there has to be some sort of internal charging system to make it work.
If you get a charger for USB it is the internal system that handles the current rate, not the charger. The specs on the charger shows the maximum current possible, not the charger's constant charge rate.
So if the phone's internal charging system thinks it's ok with 1A it will use it, but as mentioned earlier, it will produce more heat, but with a faster charging.
Though USB charging specs is limited to 1.8A, most charging circuits is possible to set to less current, with some part charging the battery, the rest powering the phone.
on8a said:
What I've seen on battery charging on mobile phones is that they have an internal intelligent charging system, at least the Siemens and Wavecom systems I've been using.
LiIon batteries are normally charged using constant voltage/constant current until a certain voltage level is reached, ~4.2V for 3.6V batteries. Then the charge current is reduced with a constant voltage until the charging current reaches zero. This implies that from a 5V charger there has to be some sort of internal charging system to make it work.
If you get a charger for USB it is the internal system that handles the current rate, not the charger. The specs on the charger shows the maximum current possible, not the charger's constant charge rate.
So if the phone's internal charging system thinks it's ok with 1A it will use it, but as mentioned earlier, it will produce more heat, but with a faster charging.
Though USB charging specs is limited to 1.8A, most charging circuits is possible to set to less current, with some part charging the battery, the rest powering the phone.
Click to expand...
Click to collapse
Thanks very much that's very informative.
I am wondering if the X1 has this internal intelligent charging system you mentioned. Would be useful to know.
Actually the mA ratings are what the charger can deliver. Not what they actually will deliver. A 700mA rated charger will supply up to 700mA if asked for by the device. This is a two way thing. The charger side will never provide more than it's maximum rating, it's a built in safety thing. The charged side should never ask for more than it can handle, providing that it is a well built piece of electronics. I trust the X1 to be well built on this. USB standards rate a maximum of 500mA for high power devices. The X1 does adapt and thus will charge slower.
Glad this is being discussed; as my X1 is a UK model, I don't have a US wall charger.
I found some on monoprice.com, see under the Power to USB section at the bottom:
http://www.monoprice.com/products/subdepartment.asp?c_id=103&cp_id=10311
They have 3 varieties:
High-Speed WALL Power to USB Female Converter (1000mah) - Black
High-Speed WALL Power to USB Female Converter (1000mah) - White
[**cant tell a discernable difference between those two, but one is larger...**]
WALL Power to USB Female CHARGER Converter - Black (500mah)
[**many people complaining about this not charging their devices; either it really does suck or they didnt get one with enough output**]
I WONT kill the phone picking up a 1000mah?
Anyone else in my situation needing a new US charger, this site has great prices on this stuff... these adapters are under 2 bucks, and USB cables are super-cheap too!
My G1 after I put him on charger goes till 100% and than act like it is not connected to any charger.
Like today it got to 100% and in the morning was on 98%.
I use AC wall charger for Motorola V3.
people tells me that is no problem, should be the same with miniUSB connected to PC.
I believe the default charing behavior of most rechargeable devices is
charge to 100% stop charging until the % is lower then a defined %
then charge to 100% once more
Do not use a moto V3 charger to charge your G1. It charges at a lower voltage and could effect your battery life. Use the one that came with the phone, another HTC charge or a blackberry charger. They all charge at the same voltage.
The only thing I see is the V3 charger has a lower amperage rating whereas the charger that came with the phone is capable of putting out 1A. It might be sending data at night and using more power than the V3 charger can put out.
First night I had my phone I had wifi and gps on with full screen brightness hooked up to the USB on my desktop PC and I was actually draining the battery while it was "charging" It's a power hungry phone when it wants to be. I would look into finding the factory charger.
speoples20 said:
Do not use a moto V3 charger to charge your G1. It charges at a lower voltage and could effect your battery life. Use the one that came with the phone, another HTC charge or a blackberry charger. They all charge at the same voltage.
Click to expand...
Click to collapse
usb can only charge at most usually 5v. Any miniusb charger will work for it, it wont overcharge it, it will only undercharge it. "smart circuits" if you will, tell the phone to shut off at a full charge, and like previous posts, to stop charging it, and when it reaches said threshold (98 percent) it will charge it, basically maintaining charge, without overcharging alltogether.
P.S.
http://www.hardwarebook.info/Universal_Serial_Bus_(USB)
inpherno3 said:
. Any miniusb charger will work for it, it wont overcharge it, it will only undercharge it.
Click to expand...
Click to collapse
Actually, I can tell you that the mini USB charger for my Toshiba G900 will *not* charge my G1, but will charge other devices I have.
Regards,
Dave
foxmeister said:
Actually, I can tell you that the mini USB charger for my Toshiba G900 will *not* charge my G1, but will charge other devices I have.
Regards,
Dave
Click to expand...
Click to collapse
UNLESS it charges it lower than the voltage thats needed to maintain a charge ;-)
If this was mentioned before I'm sorry about bringing it up again but with my lack of knowledge on li-ion batteries I figured I'd check with you guys to make sure nothing is amiss here. When I was charging my n1 I noticed the back getting quite warm so I installed spare parts and saw that my battery temp was nearly 38 degrees Celsius.
Is this a bad thing or is it completely normal and I shouldn't think to much of it?
Again I'm sorry for the noob question.
Completely normal.
its normal, the wall charger charges at 1A, while USB charges at 500mA. If you want a faster charge wall charging is the way to go. I use USB because im not in a hurry and high temps are not good for any device (although im not saying you shouldnt use a wall charger, its just my personal preference).
It's normal, mine behaves the same way...
melterx12 said:
its normal, the wall charger charges at 1A, while USB charges at 500mA. If you want a faster charge wall charging is the way to go. I use USB because im not in a hurry and high temps are not good for any device (although im not saying you shouldnt use a wall charger, its just my personal preference).
Click to expand...
Click to collapse
Actually, the battery is designed to be charged optimally at .98 amps. I recall someone saying that charging with the adapter is better for battery life, and charging with the USB cable should be done sparingly.
Cool that's good to hear, I just wanted to be a bit on the cautious side.
uansari1: so it's better for the battery to charge it with the power adapter? Offhand do you know what kind of drawbacks would occur if we were to use the usb cable instead? I'll try to do some research on it a bit later, if using the adapter means keeping the battery healthier I'd be all for it.
amlwaycooljr said:
Cool that's good to hear, I just wanted to be a bit on the cautious side.
uansari1: so it's better for the battery to charge it with the power adapter? Offhand do you know what kind of drawbacks would occur if we were to use the usb cable instead? I'll try to do some research on it a bit later, if using the adapter means keeping the battery healthier I'd be all for it.
Click to expand...
Click to collapse
What we were told, and this was in the G1 forum, was that the battery life and capacity is maximized when using the charger, and over time if you only charge with the USB cable, the capacity can go down...meaning it loses calibration over time.
Don't worry about the battery getting warm... the phone is designed for it, and so is the battery.
Sarcasm, haha laugh a little.
But really, do you guys notice that it takes a long time for the battery to charge?
I think when available, I'll buy a bunch of batteries just to have handy.
well the battery is 1500mAh the nexus charged pretty quickly but it was 1400mAh i am not sure how much difference 100mAh will make on charging the battery but that could be a possibility.
Charging with the computer will always be slower, if that's what you're using.
I wonder if its the charger. The provided charger has an output rating of 0.7A. I know some microusb chargers I have seen are rated as high as 1.0A. That could be the difference.
soklean said:
well the battery is 1500mAh the nexus charged pretty quickly but it was 1400mAh i am not sure how much difference 100mAh will make on charging the battery but that could be a possibility.
Click to expand...
Click to collapse
I was thinking the same thing...hhmm could 100mAh make that much of a difference?
heygrl said:
Charging with the computer will always be slower, if that's what you're using.
Click to expand...
Click to collapse
I always try to avoid using the computer to charge my phone. It just seems to take awfully long even plugged into the wall.
landale said:
I wonder if its the charger. The provided charger has an output rating of 0.7A. I know some microusb chargers I have seen are rated as high as 1.0A. That could be the difference.
Click to expand...
Click to collapse
Interesting...that could be. However, maybe it's 0.7A for a reason? Perhaps the battery needs to have it at that "flow rate." ???
We did get a different charger over the i9000, they had a separate USB cable and microUSB wall charger. We obviously don't have that setup.
Some phones have Li-Pol batteries and they have to charge differently. This could be why it's taking so long to recharge.
check a tmobile store or website for the new portable micro usb charger. charges your phone on the go and recharges itself via a usb charger the vibrant ships with or your computer. i got mine and was a lifesaver the other night when i needed to leave my house with 10% charged.
I hate saying this, but: I literally LOL'd from the title of this thread.
I completely agree. Charging takes fuggin' forever. My guess would be that turning the device off helps speed this up, tremendously. But of course, who wants to do that?
That said, battery life has been impressively long, provided you turn off Samsung's widgets. :/
iunlock said:
Interesting...that could be. However, maybe it's 0.7A for a reason? Perhaps the battery needs to have it at that "flow rate." ???
Click to expand...
Click to collapse
That would be a huge design oversight if a generic charger caused problems with the battery. I'm sure Samsung thought about the user charging with a generic charger.
Mine charges pretty fast I'm using the usb that came with the moto cliq
iceshinobi said:
Mine charges pretty fast I'm using the usb that came with the moto cliq
Click to expand...
Click to collapse
How fast is fast, iceshinobi?
I have conditioned my battery twice and going from empty with the phone off and pluged into the wall not via usb-pc, took me over 4hrs each time.
If the charger is 0.7 going to a 1.0 would be a huge improvement. The only worry would be the extra heat and problems that might cause. With NiMH batteries quick charging is preferable to slow charging, is this the same for Li-ion?
came here for insight as well, woke up at like 5am, phone was almost dead, 10% battery or so
turned it off, plugged it in to the wall charger and it is now 8am and it is maybe 60-70% charged
what the hell?
with my g1 turned off i can go from 0 to 100% charge in like an hour or so using a USB port. now i know the battery is smaller but c'mon... this is ridiculous.
Could it be that the phone just has to break in? When I first got G1 it would take about 4 hours to charge I remember, now a year and a half later I can get it to 80-90 percent in 1 and a half.
The computer USB standard is 100 to 500 milliamp, the USB walloulet adapter (charger) Is 700 milliamp, our batteries are 1500 milliamp and that's why.
USB cables have a certain standards witch includes voltage and current standards.
If you want a fast charger look for a hard wired 1000-1200 milliamp charger with a micro USB connector on ebay.
siberslug said:
The computer USB standard is 100 to 500 milliamp, the USB walloulet adapter (charger) Is 700 milliamp, our batteries are 1500 milliamp and that's why.
USB cables have a certain standards witch includes voltage and current standards.
If you want a fast charger look for a hard wired 1000-1200 milliamp charger with a micro USB connector on ebay.
Click to expand...
Click to collapse
Interesting...having a 1000+ milliamp charger shouldn't cause heat issues would it for pumping in more juice at a higher rate?
Any one Disappointed with the charger they included with the Pure. The non removable cord just sucks and a poor choice in my opinion
I'm more disappointed at the size of the wall wart. They could have made more friendly to other power strip users.
razor237 said:
Any one Disappointed with the charger they included with the Pure. The non removable cord just sucks and a poor choice in my opinion
Click to expand...
Click to collapse
Pretty sure they did that so you couldn't just stick any usb charging cord in their...it'd most likely fry it.
The disappointing part is the my other cords not working with Android auto. Luckily I have a nexus 6, and the cord with its charger works.
Sent from my P01MA using Tapatalk
brholt6 said:
Pretty sure they did that so you couldn't just stick any usb charging cord in their...it'd most likely fry it.
Click to expand...
Click to collapse
I guess that could be a reason but highly doubt anything would be fried. Ive been using a nexus 6 turbo charger and before that i was using a note 4 charger to charge multiple android/apple devices without issue. This just limits what i can charge on a single charger now need a second lol
razor237 said:
I guess that could be a reason but highly doubt anything would be fried. Ive been using a nexus 6 turbo charger and before that i was using a note 4 charger to charge multiple android/apple devices without issue. This just limits what i can charge on a single charger now need a second lol
Click to expand...
Click to collapse
If you plugged in a charging cord that can't handle the increased power it sure could fry the cord. I feel ya though...it would be nice if it were a USB cord.
I'm glad it looks different.... My son knows NOT to plug his HTC M7 into this charger.
I can see if this was someones first Android, the lack of a micro-USB for data would be frustrating, but I have about 5 of these in my desk drawer and throughout my house and office, so it doesn't bother me.
Also having a fixed cord means you don't pulg some 'slow' cable in and not get any benefits. Out my 8-10 micro USB cables, only 2-3 get a decent charge speed.
tele_jas said:
I'm glad it looks different.... My son knows NOT to plug his HTC M7 into this charger.
I can see if this was someones first Android, the lack of a micro-USB for data would be frustrating, but I have about 5 of these in my desk drawer and throughout my house and office, so it doesn't bother me.
Click to expand...
Click to collapse
If a device that does not do Turbo Charging is connected, the charger should automatically adjust and charge it at regular speed. At least, that's what it is supposed to do. The Turbo Charger is supposed to be the single charger for all types.
Sent from my Nexus 10 using Tapatalk
Darnell_Chat_TN said:
If a device that does not do Turbo Charging is connected, the charger should automatically adjust and charge it at regular speed. At least, that's what it is supposed to do. The Turbo Charger is supposed to be the single charger for all types.
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
Good, because I know I'll find his phone on that charger some day
I still have my galaxy s6 nexus charger that is a fast charging and it seems to work fine with turbo charging
Sent from my LG-H345 using XDA Free mobile app
I think the reason they made the cable fixed is because a lot of cheaper usb cables use very thin wire gauges. Since this charger puts out a lot of current at varying voltages, it's very possible for a thin cable to overheat easier and catch on fire. And my guess is, they didn't want to take any chances
How do we determine if turbo charger is ongoing? I mean are there any indication? Coz when I plug in the TurboCharger that comes with it, sometimes TurboPower Connected shows at the bottom of the screen, sometimes not. Then when I check it on the Status, it says Charging over USB, not Charging over AC? Could be that my unit is defective? perhaps the charger? or the battery?
DrearierJester1 said:
How do we determine if turbo charger is ongoing? I mean are there any indication? Coz when I plug in the TurboCharger that comes with it, sometimes TurboPower Connected shows at the bottom of the screen, sometimes not. Then when I check it on the Status, it says Charging over USB, not Charging over AC? Could be that my unit is defective? perhaps the charger? or the battery?
Click to expand...
Click to collapse
I've got the same issue going on. My replacement from Amazon will be here Tuesday so I'll have time to mess with both and see if its the charger or what. Currently my turbocharging is hit or miss.
DrearierJester1 said:
How do we determine if turbo charger is ongoing? I mean are there any indication? Coz when I plug in the TurboCharger that comes with it, sometimes TurboPower Connected shows at the bottom of the screen, sometimes not. Then when I check it on the Status, it says Charging over USB, not Charging over AC? Could be that my unit is defective? perhaps the charger? or the battery?
Click to expand...
Click to collapse
I have this issue sometimes to. So if I need to know if im charging at turbo I use an app from the app store to see if states I'm turbo Charging or not. In the Charging screen it will say "normal or Turbo"
https://play.google.com/store/apps/details?id=com.gombosdev.ampere
DrearierJester1 said:
How do we determine if turbo charger is ongoing? I mean are there any indication? Coz when I plug in the TurboCharger that comes with it, sometimes TurboPower Connected shows at the bottom of the screen, sometimes not. Then when I check it on the Status, it says Charging over USB, not Charging over AC? Could be that my unit is defective? perhaps the charger? or the battery?
Click to expand...
Click to collapse
You can use a USB voltage/current indicator device to see it directly. I use one that displays voltage and current simultaneously, it cost about $10 on Amazon.
The Qualcomm QC 2.0 (which Motorola terms "TurboPower) spec is 5, 9, 12, and 20 volts, with up to 2 amps plus at each voltage. The QC 2.0 chargers I've tested including the Motorola charger included with the XT1575, range up to 9V and about 2+ A at 9V, with the higher voltage/amperage when battery is discharged to a lower SoC.. Haven't seen 12V or 20V, I think those only come into play when battery is discharged to nearly zero SoC.
Agree the reason the included charger has cable attached may be to ensure adequate wire gage. Too-thin wire will increase voltage drop across cable thus lengthening charge time in higher power modes. But the design here uses higher voltage to keep current down around the same 2A max current of USB 2.0 chargers, so cable heat will not be a problem with any old USB cable.
I will attest to the benefit of QC 2.0. I thought it was a useless gimmick until I started using it. It does effectively compensate for mediocre battery capacity.
My "Turbo Charging" icon displays properly, but doesn't charge very quickly if connected to a cheap extension cord.
Plugged into the wall, the charging Stull doesn't impress me that much
Sent from my XT1575 using Tapatalk
DrearierJester1 said:
How do we determine if turbo charger is ongoing? I mean are there any indication? Coz when I plug in the TurboCharger that comes with it, sometimes TurboPower Connected shows at the bottom of the screen, sometimes not. Then when I check it on the Status, it says Charging over USB, not Charging over AC? Could be that my unit is defective? perhaps the charger? or the battery?
Click to expand...
Click to collapse
It's defective. Call moto they will replace it for free. Just have to send copy of purchase receipt. Had the same issue.
The charge rate depends on how discharged the battery is when connected to charge.
More discharged (lower SoC, State of Charge) will drive a higher charge rate.
As to the difference between this Motorola TurboPower (aka Qualcomm Quick Charge 2.0), vs. other phones:
I've measured up to 1.4 amps at 5V nominal on other phones, that is about 9 watts charging power. That is max charge rate, with a very discharged battery. As the battery charges up closer to fully charged, the charge rate (power) is reduced. Total charging time from fully discharged to fully charged would be about 4-5 hours, give or take, for a typical cellphone battery.
For comparison, the QC 2.0 measurements I made with the MXPE: Up to 2.2 amps at 9V nominal with a phone battery discharged to about 40-50%. That works out to about 20 watts charging power. As with other Li-Ion battery charging systems, this also declines as the battery approaches fully charged. Total time to charge, from fully discharged to fully charged will be about 2-3 hours, give or take.
So the marketing claims about QC 2.0 are about right: A 75% improvement over conventional charging systems.
The biggest gains come when charging batteries discharged to lower SoC. If you are comparing charge rate/time of batteries discharged to only, say, 70-80%, you will not see as much of a difference with QC 2.0.
I'm not a QC 2.0 marketing shill, mind you. I pretty much ignored it, before buying the phone. But for this phone, QC 2.0 actually does a good job to compensate for the mediocre battery. I can run the battery down to 40-50%, put it on QC 2.0 charger in my car for my 30 minute commute, and it is charged to around 80+% when I arrive at my destination. There are a lot of QC 2.0 certified aftermarket chargers out there too, Qualcomm did a lot of work on the front end as part of bringing it to market. (Just make sure any AC charger is UL listed or equivalent, if you care about safety.
Caveats on cables: The cable does make a difference at higher charge rates. Thinner gage wire will impose a greater voltage drop at higher current, this will reduce power and thus increase charge time.
Typical USB cables are AWG 26-28. You can buy 20, 22, and 24 AWG USB cables. Some cables advertise heavier (22-24) gage wire for the power leads with standard (26-28) gage wire for the data leads. The aftermarket QC 2.0 AC chargers I bought listed their included cables as 20 gage.
Get the heavier gage if you want full QC 2.0 charging.
soufdallas said:
I still have my galaxy s6 nexus charger that is a fast charging and it seems to work fine with turbo charging
Sent from my LG-H345 using XDA Free mobile app
Click to expand...
Click to collapse
Just to check did you use S6 original charger ? And does it charge same with the turbo power charger provided by moto?
Sent from my Moto X Pure (2015) via Tapatalk