Database Users

[Q] Unusual brick

i was installing an app from google play. And suddenly my galaxy y's screen got hanged the display was stuck at same frame for like 15-20 minutes.
So i pulled out the battery, inserted battery again and powered on the phone. But it was stuck at samsung boot logo.
So i Entered Into CWM mode and i tried to wiped data. But it said "error mounting/data!"
So i Go into advanced mode And select mount /data but i got same error again
So finnaly i tried to install new custom rom(hyperion latest preview edition)(previously i was using jellyblast 3)I successfully installed rom without errors but it was also stuck at boot logo. I tried to wide data in stock recovery too but got the same error"cant mount data"
Now i'm totally stuck. I cant flash stock rom from odin too.... it also shows error.....
what to do now please help me

Flash a stock rom via odin
Edit
what error did you get while flashing a stock rom?

amal das said:
Flash a stock rom via odin
Edit
what error did you get while flashing a stock rom?
Click to expand...
Click to collapse
This Error-
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

u r stuck on splash image or the bootanimation?

hell_lock said:
u r stuck on splash image or the bootanimation?
Click to expand...
Click to collapse
Splash Image

anant_6 said:
This Error-
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try another version of Odin and stock

amal das said:
Try another version of Odin and stock
Click to expand...
Click to collapse
i have already tried 2 versions of odin and 3 versions of stock

TRY FLASHING ANY stock KERNEL USING NON ODIN METHODS

hell_lock said:
TRY FLASHING ANY stock KERNEL USING NON ODIN METHODS
Click to expand...
Click to collapse
tried installing this kernel http://www.mediafire.com/?2o40bhqa6dfnfzt using mai77's method, it said install from sdcard complete
but still stuck at splash screen :crying:

anant_6 said:
tried installing this kernel http://www.mediafire.com/?2o40bhqa6dfnfzt using mai77's method, it said install from sdcard complete
but still stuck at splash screen :crying:
Click to expand...
Click to collapse
Is that a stock kernel?
Sent from my GT-S5360 using XDA

use flashable stock rom...

hell_lock said:
Is that a stock kernel?
Sent from my GT-S5360 using XDA
Click to expand...
Click to collapse
yes that's stock kernel
explodeaamir said:
use flashable stock rom...
Click to expand...
Click to collapse
yeah i tried that too same thing installation successful but still stuck at splash screen

odin with repartition option checked?

kurotsugi said:
odin with repartition option checked?
Click to expand...
Click to collapse
yeah i tried that but it says installation failed .
anyways thanks for help guys. I tried everything but can't fix it ...
So i will give it to Samsung service center tomorrow i hope they will fix it ...

Odin fail again and again

Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.

devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
Mh...... odd
Sent from my LG-LS970 using xda app-developers app

devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
Sorry, but you can't mention the name of banned roms here. Anyway, try to install USB drivers for Galaxy Y here. If you can boot your phone, enable USB Debugging in Settings> Applications> Development. Make sure to download stock firmware from here: http://forum.xda-developers.com/showthread.php?t=1465800 and flash it via Odin.

luqman98 said:
Sorry, but you can't mention the name of banned roms" here. Anyway, try to install USB drivers for Galaxy Y here. If you can boot your phone, enable USB Debugging in Settings> Applications> Development. Make sure to download stock firmware from here: http://forum.xda-developers.com/showthread.php?t=1465800 and flash it via Odin.
Click to expand...
Click to collapse
What you mean by "Banned roms"
2. Samsung USB driver already installed.
i already downloaded stock firmware " S5360_DDLA3_ODDLA2_DDLA2 (revision 1) " Asia

devprakash said:
What you mean by "Banned roms"
2. Samsung USB driver already installed.
i already downloaded stock firmware " S5360_DDLA3_ODDLA2_DDLA2 (revision 1) " Asia
Click to expand...
Click to collapse
Banned roms are ROMs that are banned by xda members. It is caused by violating xda rules. Example, Jellyblast rom were banned because Avijit (creator) linking to a download which took you to an ad site and Nemesis is banned because containing warez and steal other's work.

better to install kies first
devprakash said:
What you mean by "Banned roms"
2. Samsung USB driver already installed.
i already downloaded stock firmware " S5360_DDLA3_ODDLA2_DDLA2 (revision 1) " Asia
Click to expand...
Click to collapse
If u have latest samsung drivers, then u should not get error... i'll advice to download latest kies from the samsung site.... install it... & then try odin..
i faced this problem long ago, & solved by this way...
as u know, dont use pit file.. dont clck on repartition...
best luck

devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
Use newer versions of Odin like Odin 3.0+
And make sure adb.exe/Kies.exe/Kiesxxxxxxxxxx.exe r not running

devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
Question:
Is this your first time flashing Odin?
Yes: Then first install KIES, but your stock driver is preferable (you know.. the one that comes with the box) to avoid incompatibilities, the install odin; i personally use Odin3 v1.85 and it has never failed me once.. and I have tried almost every ROM and kernel for Y. Close KIES before flashing.
No, I have done this before: Did you try another USB port or another computer? Assuming you didnt interchange the 3 files when flashing, did you remove the battery and let the fone discharge for atleast 1 minute and also did you remove the SD card. Sometimes there are files and script from your custom Roms that messes with odin so remove SD card prior to flashing.
There is another method you can do, I myself have used this twice to get out of a quite sticky softbrick... but I do not recommend it, Using a totoro pit file. If all other method fails this will MAY get you out
1. after placing PDA, MODEM and CSC... put the totoro pit file on "PIT", LEAVE BOOTLOADER ALONE!!!
2. Click repartition and NOTHING ELSE!!!
3. Click start
4. Hope for the best:fingers-crossed::fingers-crossed::fingers-crossed:

devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
did u install drivers of ur phone and started odin as administrator

As stated by a user above that make sure adb, kies ,any software that uses ur phobes usb is not running....
In odin make sure re-partition is disabled and dont use a pit file
All u need to use is pda,csc,phone,
Not even bootloader
Check whether the usb is nit interupted by anything during the flash...
Sent from my GT-S5360 using xda app-developers app

[Q] I9505 with radio issues

Hi,
Since I dont have 10 posts and cant post on the Android Development forum I guess I need to post here instead. I flashed my I9505 with Android 4.3 v.2.2 of this firmware http://forum.xda-developers.com/showthread.php?t=2341026 , which worked awesome except for a couple of force close and reboots. Perfect LTE and HSPA. I recently flashed it with the updated version Android 4.4 v.2. Everything works awesome except LTE or 3G, when trying to use those 2 the phone does not connect to a tower, doing a forced scan and connect works for a very short while and I get kicked off. Forcing 2G/Edge works perfect though!
1. When I flashed 4.4 V2, is it possible that it may somehow changed my radio firmware or can this only be done via odin? (I used philz to flash to 4.4 v2 without doing a full wipe, I wanted to keep settings/apps etc)
2. When checking here http://www.sammobile.com/firmwares/2/ under I9505 and my country South Africa(Vodafone/Vodacom), the radio version on the site and on my phone correlates
GT-I9505 Galaxy S 4 LTE
BASEBAND -> MODEM: I9505XXUBMGA
What may have caused the phone to loose HSPA and LTE connectivity?
Thanks in advance for the replies.

Ne3M said:
Hi,
Since I dont have 10 posts and cant post on the Android Development forum I guess I need to post here instead. I flashed my I9505 with Android 4.3 v.2.2 of this firmware http://forum.xda-developers.com/showthread.php?t=2341026 , which worked awesome except for a couple of force close and reboots. Perfect LTE and HSPA. I recently flashed it with the updated version Android 4.4 v.2. Everything works awesome except LTE or 3G, when trying to use those 2 the phone does not connect to a tower, doing a forced scan and connect works for a very short while and I get kicked off. Forcing 2G/Edge works perfect though!
1. When I flashed 4.4 V2, is it possible that it may somehow changed my radio firmware or can this only be done via odin? (I used philz to flash to 4.4 v2 without doing a full wipe, I wanted to keep settings/apps etc)
2. When checking here http://www.sammobile.com/firmwares/2/ under I9505 and my country South Africa(Vodafone/Vodacom), the radio version on the site and on my phone correlates
GT-I9505 Galaxy S 4 LTE
BASEBAND -> MODEM: I9505XXUBMGA
What may have caused the phone to loose HSPA and LTE connectivity?
Thanks in advance for the replies.
Click to expand...
Click to collapse
Please use the search button next time , because this has been answered so many times. and if you have any problem please post it in here.http://forum.xda-developers.com/galaxy-s4/help and in order to fix your problem you need to update your modem sir. have a nice day.
Edit: Mods please move this thread in a right section . thanks

Repulsa said:
Please use the search button next time , because this has been answered so many times. and if you have any problem please post it in here.http://forum.xda-developers.com/galaxy-s4/help and in order to fix your problem you need to update your modem sir. have a nice day.
Edit: Mods please move this thread in a right section . thanks
Click to expand...
Click to collapse
Ok, tried flashing the modem with Odin 3.04 and fails with I9505_XXUBMH1_MODEM.tar.md5 which is an upgrade to I9505XXUBMGA?! When I google how to upload the modem firmware there are many variants. What is the CORRECT method to upload a modem to a i9505 using Odin? I dont want to brick my phone.

Ne3M said:
Ok, tried flashing the modem with Odin 3.04 and fails with I9505_XXUBMH1_MODEM.tar.md5 which is an upgrade to I9505XXUBMGA?! When I google how to upload the modem firmware there are many variants. What is the CORRECT method to upload a modem to a i9505 using Odin? I dont want to brick my phone.
Click to expand...
Click to collapse
Bro download and unzip this file http://www.mediafire.com/download/48r0rgqv25s8968/GSM_Modem_XXUEMKF_and_LTE_Modem_XXUBMH1.rar then flash it with odin by selecting phone. Let me know if that fix your problem

It hangs on setup connections.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Again I ask what is the exact/correct procedure to do a flash for I9505? I assume I should extract the RAR first to a .TAR which I did and then what?

Ne3M said:
It hangs on setup connections.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Again I ask what is the exact/correct procedure to do a flash for I9505? I assume I should extract the RAR first to a .TAR which I did and then what?
Click to expand...
Click to collapse
You have to extract it and then you open odin and select phone on odin and find the file you extract then on your phone power off manually and wait 5 sec and hold power+volume down in order to go to download mode and connect the cable andpress start in odin . done/

Repulsa said:
You have to extract it and then you open odin and select phone on odin and find the file you extract then on your phone power off manually and wait 5 sec and hold power+volume down in order to go to download mode and connect the cable andpress start in odin . done/
Click to expand...
Click to collapse
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
And I get this error if I try again:
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NON-HLOS.bin
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Still not working
It says write protect enable on the phone. Is this my problem? and how do disable it?

Ne3M said:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
And I get this error if I try again:
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NON-HLOS.bin
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Still not working
It says write protect enable on the phone. Is this my problem? and how do disable it?
Click to expand...
Click to collapse
I just flashed the file via odin then select PHONE and it works alright here and i dont understand why it doesnt work for you when someone been using that file. try another file from here http://forum.xda-developers.com/showthread.php?t=2192025

Repulsa said:
I just flashed the file via odin then select PHONE and it works alright here and i dont understand why it doesnt work for you when someone been using that file. try another file from here http://forum.xda-developers.com/showthread.php?t=2192025
Click to expand...
Click to collapse
That is where I got my first files from that did not work as well...
edit: after numerous attemps I got it to work. Yay!

Ne3M said:
That is where I got my first files from that did not work as well...
edit: after numerous attemps I got it to work. Yay!
Click to expand...
Click to collapse
glad it works try to update your samsung driver prolly this is the one that causing it . but its not that bad to give it a try have a nice day

Ne3M said:
That is where I got my first files from that did not work as well...
edit: after numerous attemps I got it to work. Yay!
Click to expand...
Click to collapse
Edit: Even with the new radio. Same problems. 3g & LTE not working. 2G works flawless....

Hello,
You are tried from recovery factory resset and clean dalvik?
Sent from my GT-I9505 using Tapatalk 2

bogdan109 said:
Hello,
You are tried from recovery factory resset and clean dalvik?
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
Same problem and lost all data on my phone now:crying:
Edit:
This modem I9505XXUEMKE-MODEM seems to work. From the thread it is a ROM issue, I hope I now have enough posts to post on the developer section. Other people had the same complaints, I seemed to be one of the first.

ne3m said:
same problem and lost all data on my phone now:crying:
Edit:
This modem i9505xxuemke-modem seems to work. From the thread it is a rom issue, i hope i now have enough posts to post on the developer section. Other people had the same complaints, i seemed to be one of the first.
Click to expand...
Click to collapse
did u find a fix?
xxuemke modem didnt work for me

I flashed with latest I9505 firmware from Sammobile website. Updated Radio, bootloader and camera firmware automatically! Then you can flash whatever you want. You must also check that the modem you use is compatible with your country.

[Q] Soft Brick... Need Help :(

So I tried flashing a stock Poland 4.2.2 ROM and when I tried to flash it with Odin I got the invalid Ext4 firmware error... I tried flashing like 6 different roms and none of them work... I keep getting either that or some other weird fused 3 > BInary 2 message...
I have no idea what to do... Is it fixable? I can't get to recovery. Only download mode.
PS: i searched for an answer here and found someone with a similar problem. He just flashed a ROM and it worked for him. I tried to do the same, and no luck...

Ok I managed to get Recovery to work and I tried putting Roms in there and flashing... It's stuck on the Samsung Logo and it bootloops... Any ideas? :/

Sinotek said:
Ok I managed to get Recovery to work and I tried putting Roms in there and flashing... It's stuck on the Samsung Logo and it bootloops... Any ideas? :/
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2507403
try this but dont know if it works on 4.4.2

jaythenut said:
http://forum.xda-developers.com/showthread.php?t=2507403
try this but dont know if it works on 4.4.2
Click to expand...
Click to collapse
No luck... I think the problem is the phone assumes it's updated to 4.4.2 so now I can't do any rollback to 4.3 and I'm just stuck... No ROM is working out for me... This is horrible... Seems a lot of people are experiencing the same issue as well.

Sinotek said:
No luck... I think the problem is the phone assumes it's updated to 4.4.2 so now I can't do any rollback to 4.3 and I'm just stuck... No ROM is working out for me... This is horrible... Seems a lot of people are experiencing the same issue as well.
Click to expand...
Click to collapse
looks like your going to have to flash stock again

jaythenut said:
looks like your going to have to flash stock again
Click to expand...
Click to collapse
That's the point... Doesn't work either... My phone is stuck... I tried all possible stock ROMS. All of them either give me invalid Ext4 error or that Fuse error...
I'm starting to worry... It doesn't seem fixable...

Sinotek said:
That's the point... Doesn't work either... My phone is stuck... I tried all possible stock ROMS. All of them either give me invalid Ext4 error or that Fuse error...
I'm starting to worry... It doesn't seem fixable...
Click to expand...
Click to collapse
I would suggest trying to flash the Kitkat rom again, the one that was broken up originally from Sammobile.
Make sure the new bootloader is also flashed.
I wonder if you flashed with re-activation lock on?I know it caused a buttload of problems with 4.3 so it would definately NOT like 4.4.2....

Extract PIT file from the leaked firmware and flash the Kit Kat with the PIT file.

ultramag69 said:
I would suggest trying to flash the Kitkat rom again, the one that was broken up originally from Sammobile.
Make sure the new bootloader is also flashed.
I wonder if you flashed with re-activation lock on?I know it caused a buttload of problems with 4.3 so it would definately NOT like 4.4.2....
Click to expand...
Click to collapse
I tried. It doesn't even start to flash. Invalid Ext4 image error straight away...
vndnguyen said:
Extract PIT file from the leaked firmware and flash the Kit Kat with the PIT file.
Click to expand...
Click to collapse
There is no PIT file. It's an md5 file. I extracted all the files from it anyways. No Pit there... Maybe you could upload it for me or link it to me?

Sinotek said:
That's the point... Doesn't work either... My phone is stuck... I tried all possible stock ROMS. All of them either give me invalid Ext4 error or that Fuse error...
I'm starting to worry... It doesn't seem fixable...
Click to expand...
Click to collapse
try another new recovery, like cwm 6 that is compatible with ext4..

Sinotek said:
There is no PIT file. It's an md5 file. I extracted all the files from it anyways. No Pit there... Maybe you could upload it for me or link it to me?
Click to expand...
Click to collapse
you can find the PIT file in the CSC_OXX_N9005OXXENA5_327209_REV03_user_low_ship_MULTI_CERT.tar
download it here: http://x-mirror.cu.cc/Samsung/Note3...NA5_327209_REV03_user_low_ship_MULTI_CERT.tar

emanuelefreddo said:
try another new recovery, like cwm 6 that is compatible with ext4..
Click to expand...
Click to collapse
Recovery works fine. It's the stock ROM flashing via Odin that keeps failing.
I tried flashing ROMs via CWM. No go. Flashing goes fine but the phone bootloops on the Samsung logo...
It's so annoying Samsung doesn't have EFR on Kies for Note 9005...
vndnguyen said:
you can find the PIT file in the CSC_OXX_N9005OXXENA5_327209_REV03_user_low_ship_MULTI_CERT.tar
download it here: http://x-mirror.cu.cc/Samsung/Note3...NA5_327209_REV03_user_low_ship_MULTI_CERT.tar
Click to expand...
Click to collapse
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> FAIL! (Ext4)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Same. Invalid EXT4 Image
Any other ideas?

Sinotek said:
Recovery works fine. It's the stock ROM flashing via Odin that keeps failing.
I tried flashing ROMs via CWM. No go. Flashing goes fine but the phone bootloops on the Samsung logo...
It's so annoying Samsung doesn't have EFR on Kies for Note 9005...
Click to expand...
Click to collapse
can stock rom be flashed by recovery?i dont like client like odin...

emanuelefreddo said:
can stock rom be flashed by recovery?i dont like client like odin...
Click to expand...
Click to collapse
Would be awesome if there would be such way... I never found it tho...

Sinotek said:
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> FAIL! (Ext4)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Same. Invalid EXT4 Image
Any other ideas?
Click to expand...
Click to collapse
Did you select to flash the pit file?
All other files are selected properly?
Can you post the screenshot of the ODIN?

Sinotek said:
Recovery works fine. It's the stock ROM flashing via Odin that keeps failing.
I tried flashing ROMs via CWM. No go. Flashing goes fine but the phone bootloops on the Samsung logo...
It's so annoying Samsung doesn't have EFR on Kies for Note 9005...
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> FAIL! (Ext4)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Same. Invalid EXT4 Image
Any other ideas?
Click to expand...
Click to collapse
corrupted stock rom file?

vndnguyen said:
Did you select to flash the pit file?
All other files are selected properly?
Can you post the screenshot of the ODIN?
Click to expand...
Click to collapse
There are only 2 files so yeah.
I'll post a sreenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Sinotek said:
There are only 2 files so yeah.
I'll post a sreenshot:
Click to expand...
Click to collapse
No, that's not correct. You should:
- Load all of 5 files to the Odin: PIT, BL, AP, CP, CSC
- Select the checkbox Re-Partition
Download all needed files here: http://x-mirror.cu.cc/Samsung/Note3/UnofficialFW/Extracted/

vndnguyen said:
No, that's not correct. You should:
- Load all of 5 files to the Odin: PIT, BL, AP, CP, CSC
- Select the checkbox Re-Partition
Download all needed files here: http://x-mirror.cu.cc/Samsung/Note3/UnofficialFW/Extracted/
Click to expand...
Click to collapse
Hmm... Odd that this wasn't in Samfirmware's site...
Will give it a shot and report back shortly. Thanks

Sinotek said:
Hmm... Odd that this wasn't in Samfirmware's site...
Will give it a shot and report back shortly. Thanks
Click to expand...
Click to collapse
This is a mirror. There is also a copy in the sammobile, and they are the same.
Look here: http://www.sammobile.com/2014/01/12...-galaxy-note-3-sm-n9005/#.UtMGEIhqC48.twitter

[HELP] Phone Doesn't Boot

I tried to flash a stock ROM and got an error in ODIN that said:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now my phone only boots into Odin Mode and to a screen that says:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Please Help!

Odin stock Rom tar and start from scratch.

carwashman said:
Odin stock Rom tar and start from scratch.
Click to expand...
Click to collapse
I tried multiple Stock ROMs and I get the same error. Do you know of a legit one? The ones I had could've been corrupt.

What device do you have?

carwashman said:
What device do you have?
Click to expand...
Click to collapse
The Sprint Samsung Galaxy S4. SPH-L720

You may have to try the kitkat rom.

http://forum.xda-developers.com/showthread.php?t=2663619
This is the one I used recently. I was already on NAE

carwashman said:
http://forum.xda-developers.com/showthread.php?t=2663619
This is the one I used recently. I was already on NAE
Click to expand...
Click to collapse
Is there a way to find out what I'm on without being able to elsewhere except download?
EDIT: I get the same error with that ROM.
EDIT #2: I got it to work!!! Thanks so much guys!