Related
I had trouble finding a guide on how to get JB working on my a501 so I'm xposting this to xda. The link to the superuserfix was dead, but my install worked without it. I take no credit for this. Written by "dime" over at Tegra Owners.
I wanted to write a consolidated tutorial for people on the latest/unrooted 3.2.1 OTA and how to flash it to rooted Jelly Bean ROM. If you follow step 1, it actually installs an old version of Touch Recovery for you, so you do not need to bother with Acer Recovery Installer. All links are derived from the FAQ stickied thread.
1. First you need to obtain root. Follow this guide to install a rooted 3.2.1 image.
All data will be lost. The 10 step guide is included as a PDF in the download:
http://forum.xda-developers.com/showthread.php?t=1307539
Confirm you have the Superuser app installed once completed.
2. Download the following 4 zip archives, put them on your A500 external SD card, and do not extract them.
Touch Recovery: MOD EDIT: LINK REMOVED
Both latest JB ROM and GApps: MOD EDIT: LINK REMOVED.
Superuser Fix: http://www.mediafire.com/?xyznxalycnw9znw
3. Reboot your A500, and hold VOL- button until you boot into recovery.
VOL- is closest to the power button, what some would consider to be VOL+ on a phone.
Once in recovery, use VOL+/- to navigate the menu and power button to select.
4. Now that you are in recovery:
Go into the Wipe menu, and do a Data Wipe.
Go into the Install Zip from SD Card menu, and install/upgrade to the latest version of Touch Recovery.
Reboot the A500, and once again go into Recovery (hold VOL-).
Go into the Install Zip from SD Card menu, and install the JB ROM.
Go into the Wipe menu, and do a Data Wipe. (yes a 2nd data wipe)
Go into the Install Zip from SD Card menu, and install GApps.
Go into the Install Zip from SD Card menu, and install Superuser Fix.
(skip Superuser Fix if there comes a time when superuser is working by default)
Reboot the device (Don't hold VOL- this time).
5. You should now be in rooted JB.
Backup your apps with Titanium Backup or MyBackup Root.
Hope this helps.
Hi and thank you for this tutorial.
Can you please fix the links of the xda threads? None of them is working
behemot24 said:
Hi and thank you for this tutorial.
Can you please fix the links of the xda threads? None of them is working
Click to expand...
Click to collapse
found new link
Mizun0h said:
found new link
Click to expand...
Click to collapse
Which JB rom are you using, how is it working? Thanks.
A 501
Do it realy works an a A 501?
Anybody already tried?
thanks
thanks for the tutorial !
Mizun0h said:
found new link
Click to expand...
Click to collapse
new new links
emmerich1234 said:
Do it realy works an a A 501?
Anybody already tried?
Click to expand...
Click to collapse
worked on a501. I went from stock gb, straight to JB.
Many thanks, great post
MANY, MANY THANKS for such a great post, it really has helped me to get out of a 'sticky situation' I now have a fully functioning and latest version of JB on my PB G100 (Now Acer A500 )
You are A STAR :highfive:
Mizun0h said:
I had trouble finding a guide on how to get JB working on my a501 so I'm xposting this to xda. The link to the superuserfix was dead, but my install worked without it. I take no credit for this. Written by "dime" over at Tegra Owners.
I wanted to write a consolidated tutorial for people on the latest/unrooted 3.2.1 OTA and how to flash it to rooted Jelly Bean ROM. If you follow step 1, it actually installs an old version of Touch Recovery for you, so you do not need to bother with Acer Recovery Installer. All links are derived from the FAQ stickied thread.
1. First you need to obtain root. Follow this guide to install a rooted 3.2.1 image.
All data will be lost. The 10 step guide is included as a PDF in the download:
http://forum.xda-developers.com/showthread.php?t=1307539
Confirm you have the Superuser app installed once completed.
2. Download the following 4 zip archives, put them on your A500 external SD card, and do not extract them.
Touch Recovery: MOD EDIT LINKS REMOVED
Superuser Fix: http://www.mediafire.com/?xyznxalycnw9znw
3. Reboot your A500, and hold VOL- button until you boot into recovery.
VOL- is closest to the power button, what some would consider to be VOL+ on a phone.
Once in recovery, use VOL+/- to navigate the menu and power button to select.
4. Now that you are in recovery:
Go into the Wipe menu, and do a Data Wipe.
Go into the Install Zip from SD Card menu, and install/upgrade to the latest version of Touch Recovery.
Reboot the A500, and once again go into Recovery (hold VOL-).
Go into the Install Zip from SD Card menu, and install the JB ROM.
Go into the Wipe menu, and do a Data Wipe. (yes a 2nd data wipe)
Go into the Install Zip from SD Card menu, and install GApps.
Go into the Install Zip from SD Card menu, and install Superuser Fix.
(skip Superuser Fix if there comes a time when superuser is working by default)
Reboot the device (Don't hold VOL- this time).
5. You should now be in rooted JB.
Backup your apps with Titanium Backup or MyBackup Root.
Hope this helps.
Click to expand...
Click to collapse
Hi there....I'm just wondering how this works!!!!!
If I understand your guide correctly then,
U run timmydeans v4 rooted HC bootloader
check s/user
Flash 1.7.3 ics recovery, the ROM, gapps and s/user fix
Then enter recovery wipe/flash etc....
So, not only did u manage to flash a recovery, u r also running JB - all without the unlocked boot loader?????
I have to give this a go....if this really does work you have made my day, lol
Sent from my A500 using Tapatalk 2
EDIT: k I've just read 60 odd pages from the JB ROM thread - and answered my own question...seems this tegra-owners ROM runs with or without the patched boot loader....interesting!
EDIT: ok i tried this anyway even tho i was running the patched bootloader....may explain my issues!!
had troubles right from the get go - The tdv4 EUU wouldnt recognise my tab in apx mode, after mucking about I got the "Pass"
rebooted into cwm - nup - stock recovery??? weird....
found a boot.p file so renamed that and installed acer recover installer to flash cwm 1.7
from there flashed cwm 1.7.3 and the rest of the guide!!!!
could not install super user fix zip kept telling me there was an error and had aborted installation...s/user seems to be working ok
so after 7 hours I have thors JB with the 3,01 BL
perhaps it could be made clearer that this guide is for tabs runnin gingerbread or HC, altho it will work on the v8 BL the question would be why you would want to....however for those who havent updated its not as complicated as trying to get ones head around patched bootloaders, nvFlashing etc.
JUST A WARNING not all ICS/JB roms can be flashed like this MOST WILL REQUIRE the patched bootloader....
ALWAYS BACKUP and ALWAYS CHECK THE DEV's OP for whatever rom u intend to fllash, and if u dont understand something
please ask stating what rom/BL config you're on and what you're trying to flash to!!! Its alot easier than trying to talk/msg your way out of a brick
Mizun0h said:
worked on a501. I went from stock gb, straight to JB.
Click to expand...
Click to collapse
After the update did you have any issues with cellular data or is that still intact too?
Thanks!
lft4ded said:
After the update did you have any issues with cellular data or is that still intact too?
Thanks!
Click to expand...
Click to collapse
I dont use a sim card. but on my a501 it asked me to please insert sim during first boot and always has a signal bar in the bottom right the indicates no reception. So most likely yes. Hope that helps.
lft4ded said:
After the update did you have any issues with cellular data or is that still intact too?
Thanks!
Click to expand...
Click to collapse
For me cellular data has worked flawlessly. It has been definitely the best rom for my a501!
Thread Closed
Thread is currently closed and links removed for the following reason;
Thor202ro rom kernel violates GPL. Otherwise know as not releasing kernel source. Most people here in the forums are well aware of the fact that non-GPL compliant kernels are not allowed to have links directly posted to them. This in the XDA rules.
The reason GPL is in place, is so that things like "carrier IQ' don't happen again. This is why kernel source should be open-source. Without it, the kernel could be transmitting personal data, and nobody would know it.
Additionally, the website in question, is a revenue generating website, and thus this also violates XDA rules by having links posted to revenue generating websites (ad-fly) to download Thors software. So this is a touchy spot.
Most people know where the site is anyhow.
And no, I am not going to re-hash the history.
Any issues regarding this, then please contact XDA Senior Moderators.
MD
i opened this post to encourage developers to port roms on alcatel c7 phones
root
this phone can be rooted with kingo root or vroot
cwm recovery for 7041x
My stock backup here:
http://forum.xda-developers.com/showpost.php?p=51647278&postcount=17
My first update to stock here:
http://forum.xda-developers.com/showpost.php?p=51658198&postcount=18
And my recovery cwm 5.5.0.4 here:
http://forum.xda-developers.com/showpost.php?p=51698373&postcount=3
maybe a Cyanogen mode will be nice to have dor this device...to bad this screen has only 2 touch point
How to install CWM Recovery?
rascally81 said:
How to install CWM Recovery?
Click to expand...
Click to collapse
with mobile uncle tools
gabi4175 said:
cwm recovery for 7041x
Click to expand...
Click to collapse
On 7041D install? Sorry.
litunse said:
On 7041D install? Sorry.
Click to expand...
Click to collapse
you can build your own with mtk droid tools there are guides in xda for that. or you can use my own as i know c7 have the same rom on all versions. But the cwm doesn't fully support the alcatel so it's useless you can flash but you can't make backup with it
Does anyone know a good guide to follow? I'm looking to root and flash CWM on my 7041X without bricking it. Thanks!
The quick sollution it's to gain root with RootGenius, install Mobile Uncle Tools, Flash CWM from here http://forum.xda-developers.com/showpost.php?p=51698373&postcount=3 and after that you will have all. If you don't like kinguser, install supersu, lunch it to gain root and uninstall kinguser after that.
fantomel said:
The quick sollution it's to gain root with RootGenius, install Mobile Uncle Tools, Flash CWM from here http://forum.xda-developers.com/showpost.php?p=51698373&postcount=3 and after that you will have all. If you don't like kinguser, install supersu, lunch it to gain root and uninstall kinguser after that.
Click to expand...
Click to collapse
I would very much like to do a backup before installing a recovery so I can send my phone back to warranty without issues in case it's needed.
I have answered you here: http://forum.xda-developers.com/showpost.php?p=52458446&postcount=32
CTR / TWRP Recovery Alcatel C7 7041X
Carliv Touch Recovery V2.2 / TWRP Recovery support custpack
DOWNLOAD Carliv Touch Recovery http://d-h.st/5b2
DOWNLOAD TWRP 2.4.1.0 Recovery http://d-h.st/XJV
TWRP Fixed bug mount
hanuma said:
Carliv Touch Recovery V2.2 / TWRP Recovery support custpack
DOWNLOAD Carliv Touch Recovery http://d-h.st/5b2
DOWNLOAD TWRP 2.4.1.0 Recovery http://d-h.st/P73
Click to expand...
Click to collapse
tried to flash the 2 of them within mobile uncle tools but are not seen by it
Unlocking language's
Hi,
I have a alcatel one touch 7041X. But this phone dosn't have a possibility to change on my language. (polish)
I trying with morelocale 2 but this help for only 10%.
So if is any possibility to change that please answer me.
Thank you
fantomel said:
tried to flash the 2 of them within mobile uncle tools but are not seen by it
Click to expand...
Click to collapse
to see the recovery with mobileuncle tool.
it must rename:
hanuma50_recovery in recovery
renamed them in CTR_recovery and TWRP_recovery and it works now. They can be flashed.
What i have seen it's that it does not have a mountpoint for protect_f and protect_s partition and in TWRP i have errors in mounting points:
Unable to mount '/emmc' - 3 times
Unable to recreate android secure folder
Unhandled flag :'backup=1' - 6 times
Updating partition details ...
Unable to mount '/emmc'
Unable to mount /emmc during GUI startup,
Unable to mount /emmc when trying to read settings
Does anyone know if this phone supports HDMI MHL with an adapter? I know it has USB OTG, but the HDMI I don't know. I know some french websites sell this adapter for this phone, but I couldn't find info anywhere.
So, following the tutorial that has been made for Idol X mini HERE and since i had already the scatter file from my C7 Vodafone ES, today i had on my hands a new C7 from Vodafone RO. So i have made a full backup from this phone using SP Flash v5.1408.00 without even opening it. So this back-up it's a fresh one with no initialisation on phone. Also it has the extra img of cache and userdata.
You can find all the files HERE . On attached image it's the backup address used and also the scatter file.
Hello everyone,
last night I was toying with my Note 3 (SM-N9005) European Edition and I succesfully rooted the phone and installed Super SU.
Super SU was upgraded automatically via TWPR.
Tried to Flash Darkwolf Note7 rom for Note3.
Installation starts, but once it begines I get an error about wrong footer and the progress bar stops.
So I went back, used Odin again, changed from TWRP to CWM tried to flash again the same Rom got verification of zip file failed.
Downloaded RessurectionRom with 6.0.1 for note 3, same issue.
Went back again, changed from CWM to TWRP once more, same issue.
Installation fails
Ultimately had to recover the ROM that I had backed up.
Not sure what the problem is?
Can someone help me?
Thank you in advance.
Read the roms OP a guess is you are using the wrong version of TWRP .
TWRP recovery recommended, 2.8.7.0. Newer versions are not supported
Ι don't think that the issue mate.
I downloaded exactly what I should have according to their site and the tutorial I follow.
Furthermore CWM has a dedicated CWM for note 9005 which again was unable to complete the installation.
So any other thoughts?
This is most likely due to the unsupported version of twrp you are using as darkwolf ported roms uses aroma/pico installer. Use below v3 like 2.8 you should be able to launch aroma installer.
REMEMBER TO FLASH A CUSTOM KERNEL OR IT WILL NOT BOOT ONCE YOU FINISH FLASHING THE DARKWOLF ROM AS DARKWOLF ROMS DONT HAVE ANY KERNEL INCLUDED.
I recommend using SKYNET GENESIS as your custom kernel. You will know how good it is after you install it:laugh:
I highly recommend you not to use note 7 darkwolf rom as your daily driver... features are really good but in actuall fact heats up like mad and drains battery very well
If there's still problems after trying my methods out please let me know i will give a full tutorial on how to install the DARKWOLF ROM on youtube
Cheers!
<<I recommend using SKYNET GENESIS as your custom kernel. You will know how good it is after you install it >>
That by the way is a closed thread by the mods on xda .
Hi guys, thank you for your replies.
But to b honest I am a bit of a novice. I just checked some tutorial videos and I though FUN let's sprush up the NOTE 3....
So I do not know how to proceed??
Let's see if I can help you with at least installing a CM12.1 on the n9005. Once you can successfully install CM12.1, you'll have a basic working knowledge of flashing.
Download the latest tar version of TWRP for the n9005 from here: https://twrp.me/devices/samsunggalaxynote3internationalqualcomm.html
Download Odin 3.07 from here: https://www.google.ca/url?sa=t&rct=...5QWImOPDJboTA_V3D5S9eA&bvm=bv.133178914,d.amc
Download the latest cm12.1 for the n9005 from here and save it to either a micro SD card which you will put into the phone or the phone's internal memory: https://download.cyanogenmod.org/?device=hlte
Download the latest ARM version of gapps for the n9005 from here and save it to either a micro SD card which you will put into the phone or the phone's internal memory: http://opengapps.org/
Open Odin, uncheck everything except f.reset time.
Make sure CM12.1 and gapps are either on a micro SD card or the phone's internal memory. If CM12.1 and gapps are on a micro SD card, insert the card into the phone.
Put the phone into download mode, connect the phone to the computer, flash TWRP in the PDA slot. When you see the word "reset" in the status window remove the USB cable from the phone, remove the battery, replace the battery, use the button combination (home, volume up, power) to boot into recovery which should now be TWRP.
Once you are in TWRP, wipe system, data, cache, install CM12.1, install gapps, and reboot.
JJEgan said:
<<I recommend using SKYNET GENESIS as your custom kernel. You will know how good it is after you install it >>
That by the way is a closed thread by the mods on xda .
Click to expand...
Click to collapse
It IS a closed thread but you sill can get it somewhere else from a mirror. I will provide the link once i finish hosting somewhere. I have the kernel...
---------- Post added at 12:48 AM ---------- Previous post was at 12:47 AM ----------
JJEgan said:
<<I recommend using SKYNET GENESIS as your custom kernel. You will know how good it is after you install it >>
That by the way is a closed thread by the mods on xda .
Click to expand...
Click to collapse
It IS a closed thread but you sill can
get it somewhere else from a mirror. I will provide the link once i finish hosting somewhere. I have the kernel...
please teach me how to root my phone and install CWM and TWRP.
im still noob in this site. sorry not good in english but i can understand. hopefully you could help me. i wanted to flash the noble rom powered ny remi. http://forum.xda-developers.com/gal...e-rom-v2-0make-phone-note7big-update-t3446032 :good::highfive:
How to root and install twrp revovery on grand 2 sm-g7102
hackako11 said:
please teach me how to root my phone and install CWM and TWRP.
im still noob in this site. sorry not good in english but i can understand. hopefully you could help me. i wanted to flash the noble rom powered ny remi. http://forum.xda-developers.com/gal...e-rom-v2-0make-phone-note7big-update-t3446032 :good::highfive:
Click to expand...
Click to collapse
First download kingroot and follow as the app instruct and then your device will be rooted .
Open your browser and search for "Super sume"
( but do not download it from apps4fun.com )
once u download super sume open the app and
grant it root permission and then press the big blue
icon and let it do its work once it is completed
super su will start autometiclly and then go to its seting and scroll down and search for ENABLE PRO
and put a tick on it . Now close super su and open playstore and search for FLASH FIRE and download it . Now open it and grant it root permission . Now close it and download ZIP FILE OF TWRP FOR GRAND 2 . Once u downloaded it copy i to your external sd card . Now open flash fire you will see a plus sign at the bottom press it and select flash zip or otp now select sd card as a storage from the top
and select the zip file of twrp it will show u a screen and now selet ok from the top left corner and the scroll down and select flash and then ok . And it will take 1 to 5 min to flash and its down twrp is now installed in your grand 2 . IF YOU LIKED IT PLEASE LIKE MY REPLY AND I ANY PROBLEM TELL ME
How to root and flash recoveries!
Its just easy mate, first of all youll need a PC, Odin3, and a USB Cable. Download SuperSU zip file on the chainfire website in youre phone, download TWRP or CWM recovery tar file on a specific thread, install Odin3 on any website (You need working one), so after downloading those youll need to turn off and put your phone in Download Mode or Odin mode which is for Samsung. Connect the phone into the PC and open Odin3, after opening youll see buttons which includes AP or PDA. Select it and choose the tar file and turn off any settings if told on instructions of installation, after setting those flash and once its done and shows "PASS!" remove battery for 10 secs if told and set your phone on recovery. Select install zip and choose the SuperSU zip file on the download location and BOOM! Youre done mate.
LEAVE A THX PLS! Sincerely youre friendly neighbor NYT
How should i install twrp on grand 2 sm-g710k?
NYT_RootComm said:
Its just easy mate, first of all youll need a PC, Odin3, and a USB Cable. Download SuperSU zip file on the chainfire website in youre phone, download TWRP or CWM recovery tar file on a specific thread, install Odin3 on any website (You need working one), so after downloading those youll need to turn off and put your phone in Download Mode or Odin mode which is for Samsung. Connect the phone into the PC and open Odin3, after opening youll see buttons which includes AP or PDA. Select it and choose the tar file and turn off any settings if told on instructions of installation, after setting those flash and once its done and shows "PASS!" remove battery for 10 secs if told and set your phone on recovery. Select install zip and choose the SuperSU zip file on the download location and BOOM! Youre done mate.
LEAVE A THX PLS! Sincerely youre friendly neighbor NYT
Click to expand...
Click to collapse
The first step bro look at it.
Hamza Muzaffar said:
How should i install twrp on grand 2 sm-g710k?
Click to expand...
Click to collapse
There is No TWRP for the Korean Variant of the GRAND 2 (SM-G710K)
STORMING BLOOD17 said:
There is No TWRP for the Korean Variant of the GRAND 2 (SM-G710K)
Click to expand...
Click to collapse
And what if i want to install noble rom in grand 2 it is not possible?
Hamza Muzaffar said:
And what if i want to install noble rom in grand 2 it is not possible?
Click to expand...
Click to collapse
You need to flash TWRP first
But there is No TWRP FOR SM-G710K
Flashing will probably Brick your device and/or corrupt your EFS partition
how to install TWRP 3.1.1 on Samsung Galaxy J3 2017
-------------------------------------------------
J330F--OK!
J330G--OK!
J330FN--OK!
-------------------------------------------------
TWRP for j330 3.1.1-1 by Lemlis
-------------------------------------------------
FULL STEPS TO INSTALL TWRP
DO THIS AT YOUR OWN RISK. I AND XDA AND NOT RESPONSIBLE FOR BRICKS. FOLLOW THE STEPS CORRECTLY.
WARNING: Flashing a custom recovery to your device will trip the Knox warranty bit on your phone. Check with your mobile provider to see if they will still cover warranty on Knox bit triggered devices. If you understand this risk, continue on.
NOTE: IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
1-Download TWRP :twrp3.1.1-1_J330.tar
2-Download no-verity-opt-encrypt-5.1.zip and put it on SD, external memory of the phone in any folder
3-Flash twrp3.1.1-1_J330.tar with ODIN in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
4- For the full work of the recovery need to make the format of the data section.(WIPE-format data-yes) (Warning: all your data and applications on the phone (not the SD card) will be deleted)
5-MANDATORY !!! reboot again in the recovery and install the script no-verity-opt-encrypt-5.1.zip
Congratulations! already quietly go to make backups, sewing firmware and in general anything you like
-------------------------------------------------
Download:
twrp3.1.1-1_J330.tar
twrp3.1.1-1_J330.img
no-verity-opt-encrypt-5.1.zip
-------------------------------------------------
To root with SuperSU:
Download the latest SuperSU by Chainfire,or Magisk
Flash it through TWRP.
Go to [Reboot] -> [System].--------------
opensource.samsung.com j330f
--------------
Credits:
@ashyx
@AlexVolzsk
...reserved
Succesfully installed to my j330g & enter to recovery but touch screen not working without mouse as mentioned by developer. Must wait for another stable version...aaarghhh need to flash stock rom again:crying::crying: btw thanks to mr developer for their efforts & hopefully can release stable version as soon as possible.
hi from j330fn boot from recvovery twrp but touchscreen dont work .. you can not use it but thanks this way is good
This is great! I'll be even happier when touchscreen is available.
LeeTG3 said:
This is great! I'll be even happier when touchscreen is available.
Click to expand...
Click to collapse
so why is it so unusable
ANDROIDXFOREVER said:
so why is it so unusable
Click to expand...
Click to collapse
You can use this TWRP only with mouse through the OTG cable.
In the near future I will try to fix it
I never said it was unusable. But I don't have an otg cable
LeeTG3 said:
I never said it was unusable. But I don't have an otg cable
Click to expand...
Click to collapse
I followed your advice and I solved you confirm twrp works perfectly on j330fn thanks waiting for update:good:
lemlis said:
TWRP 3.1.1-2 J330 Aroma
-Touch screen does not work! You can only use with the mouse through the OTG cable!
Changes:
-added items in the backup and mount section
-fixed small bugs
-In the Aroma, the mouse does not work, but you can select items using the volume and power buttons
Click to expand...
Click to collapse
Boss, please make touch screen working as well...i know you can do it...tq
@lemlis are twrp and the kernel both built from source?
ashyx said:
@lemlis are twrp and the kernel both built from source?
Click to expand...
Click to collapse
Twrp is ported .kernel is custom build from source.with stok kernel not work mount sd card.
Anual said:
please make touch screen working as well...i know you can do it...tq
Click to expand...
Click to collapse
here is TWRP with working touch screen
lemlis said:
here is TWRP with working touch screen
Click to expand...
Click to collapse
thanks bro from j330fn work perfect :good::good:
lemlis said:
here is TWRP with working touch screen
Click to expand...
Click to collapse
I'm 2 hours late..download link temporary removed hahaha..btw thanks.
I've downloaded twrp you attached here but the extension is .img which odin cannot read this type. I try to convert this image file to .tar and still fail to flash. Any suggestion?
Anual said:
extension is .img which odin cannot read this type. Any suggestion?
Click to expand...
Click to collapse
I aded link to .tar and to .img
Thank you very much bro...it's working???
Anual said:
I'm 2 hours late..download link temporary removed hahaha..btw thanks.
Click to expand...
Click to collapse
It will be back up later on today.
Keep an eye on this thread.
https://forum.xda-developers.com/ga...overy-twrp-3-1-1-1-samsung-galaxy-j3-t3709056
Arggghh i feel something goes wrong with my device intead of succesfull installation. Yes i can flash zip and make nandroid backup. But my device not running properly. I can't adjust screen brightness even camera not functioning. Now i'm waiting for full batery charge to flash stock rom & try to flash twrp once again???