Related
Hi there. I would appreciate your help here. I am a rookie with android software as I own an HTC Magic almost 3 weeks from now. My phone has the above characteristics:
SAPPHIRE PVT32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Dec 8 2009, 17:38:48
The software I had was Android 1.5 and it was rooted with RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver ROM. I was watching on Youtube some videos about CyanogenMod 6 at HTC phones and I decided to try to put this software to my phone via ROM Manager. The result is a major disaster (or not?). Specifically, from my phone I opened ROM Manager, download rom, CyanogenMod nightlies , CM6 XXXXXXXX (can’t remember which one) EBI1 Kernel… So I had successfully downloaded it and followed the instructions while installing. After installation completed it automatically rebooted and started loop again and again. All it gets to is the "HTC MAGIC" screen and then reboots every 5 seconds. At the begging I thought that this is the installation process. 30 minutes later I had a doubt for this. I pulled out the battery cause pressing the Power on/off button nothing happened. I tried everything… nothing at all. I pressed the Power on/off button again it continued looping. After I pulled out and inserted the battery I pressed the Home and Power on/off button (Android recovery) it still continued looping. Removed again the battery and inserting again while pressing Back and Power on/off button (fastboot ) it still continued looping. I pressed Home and Back buttons and tapped Power on/off button… the same issue (continued looping). Down volume and Power on/off button… nothing. Up volume and Power on/off button… nada. Pulled out the battery for 30 minutes and tried again… nothing again. Tried again and again with the USB connected and disconnected… nothing. Still looping. I tried to install the previous Rom I had via PC but I couldn’t cause USB was connecting and disconnecting because of the rapid (5 second) boot loop. The only button which seems to work is the trackball which freezes everything with the blue led on and a black screen between the loops. I pressed all the buttons together wishing something to happen… unfortunately nothing happened. I backup my SD card and tried with an older backup I had… nothing… boot loop remains. I am despaired and tired (almost 18 hours online searching some help or solution). The only thing I want is to make fastboot work and install my old ROM via my PC… nothing else.
Please, please, please…. HELP ME!!!
well this is a pain. Your fastboot is also locked. You should read instructions and learn a bit before just flashing whatever you please. CM6 requires old radio and a different SPL. The one you're using isn't compatible, hence the reboots. You also can't get into recovery because your radio and recovery are also not compatible. I'm assuming that rom manager did that? I'm not sure, all you new people are just running that thing and flashing away without any knowledge behind it.
I don't think you're bricked but I'm not 100% sure what to do since I've kept my bootloader unlocked to run fastboot commands (which would easily solve this situation). My suggestion is to get an RUU for your phone, update and then reroot it. Maybe someone else has a better solution but right now you don't have the right recovery and fastboot is locked. At the moment, I can't think of a better solution.
edit: ugh it's late and im sleepy! i just reread what you said, you can't get into fastboot either? If not you're probably bricked
yup, I totally agree: I remember the first time I flashed a rom over the stock version which was installed. I read every sticky thread, the whole wiki page and lots of xda threads before giving flashing a try. It's just too risky to mess up an expensive phone. Just look at all the "bricked my phone, please help" threads, that alone should make one think twice (and read, read, read) before flashing...
I hope someone can still help you. But not getting into fastboot anymore?! :-(
Sorry and good luck,
V.
Sent from my HTC Magic using Tapatalk
Thanks gyes for your replies. Still I can't find a solution. The only thing I can barelly see before it boots again by pressing Back button and On/Off button is ClockworkMod Recovery v2.5.0.1.
As about the mistakes I admit that this is my fault but also I have to say that before I root my HTC I couldn't download anything from ROM Manager. After I had succesfully rooted my phone and downloaded the ROM update from my phone there was no mention about radio issues or conflicts in the installtion proccess. Even though it is my fault and I admit it. I don't mind if I loose my data (I made an SD buck up). I just want to find a way to stop this stuppid loop, make a USB connection with my PC and install my previous ROM even if I have to screw out my phone.
as I'm not able to help you myself (I'm just a user not a developer) I can only recommend checking the "bricked phone" threads for solutions. I think I saw an "how to unbrick phone" thread somewhere. Never read it though. Probably there are many others who messed up their phone somehow and lots of solutions in all those threads. Just use the search feature and look for brick threads, solutions, help, etc. Maybe you'll find something.
Sry that I can't offer more,
Greetz,
V.
It's ok my friend... Thanx 4 replying
i don't know if it's related but a guy had a bad flash and had a blue trackball toom, which you mention in first post, here is his thread on what he did to fix his phone http://forum.xda-developers.com/showthread.php?t=649689&highlight=unbrick
Nope... Nothing helpfull unfortunately! Thanx anyway
A new clue is that I left my HTC magic to boot loop while the usb cable was connected with my PC dinging in and out while rebooting and after 10 minutes it stoped rebooting (it happened one's more yesterday). No button combination is responding (the trackball also) even if I keep pressing them over a minute continuesly. Also no led is lighting even if it is on USB connection. I ashume that if I remove and putt back the battery it will start again the boot loop as it happened yesterday. So I will leave it as it is and try later to restart...
Nothing... Started boot loop again
Today I gave my Magic to HTC Service. It was confirmed that the electronic circuit was "dead" and it had to be replaced. If I'm lucky maybe I wont pay a dime. It depends if the software I had on was Android compadible or not. If not then... better not think about it!
Last year(late 2010, maybe mid November), I rooted my phone and flashed recovery with no problem s at all. Some time after that I added Apps2SD and that went smoothly with no problems for about a week. I purchased an 8 GB SD Card for more storage room and after I partitioned it and switched the cards my phone started acting up so i rebooted it. After that I was stuck in a boot loop, so i tried to flash it back to stock but it wouldn't take to it no matter how I tried, whether it be through recovery or SW Update. So then I tried Odin Multi loader(cant remember which version but at the time I made sure it was the one meant for the Intercept) after I flashed it with the Stock through Odin, the phone bricked. Now it will not turn on in any way(recovery or other) the only thing it does do is vibrate when I plug it in to a computer, and it will occasionally show battery life through the touch screen and keyboard buttons by lighting them, but as soon as the it is unplugged it is a brick. I see the little bit of functionality as a little bit of to be able to fix this phone whether through ADB or another function but I desperately need help with this. Can someone please help me fix this phone?
note: I currently have a Samsung Transform as my main phone so if the Intercept can't be helped then it's not that big of a problem.
I have the same problem! Please help!
When you root a phone you put the rom, and recovery onto the sd card. changing sd cards disrupts this process. Put the old sd card in and tell me what happens.
The phone doesnt come on at all
see if you can get it into download mode with the battery out.
Pull battery
connect to computer with usb
vol down + camera + end
If you get into download mode this way flash the stock.tar using SWUpdater.
Nope, it doesnt work, thx though
Ok I've got the same problem with my intercept as well, So i just like to add (maybe its just me) that when i plug my phone to the computer the phone shows that its still functions right (without the screen on), I'm able to make calls, and receive them as well (with the touch of the answer button) but just the screen doesn't turn on, AT ALL!, so KJON i don't know if your having the same problem as me but I'm just a noob and i wouldn't know what to do. But there's some ammo if you need it.
I HAVE THE SAME PROBLEM! i dont even know where /sdcard/sdx/zip/ is!
My phone is also a samsung transform and not and intercept and whenever i press vol down+ Power, only the function buttons at the bottoms light up but not the screen
i am a noob.
help?
noooooob here...i didnt wanna start another thread since i have this same problem, so i hope someone reads this..
couple days ago i bricked my sprint intercept i was using SWu and forgot to take the Binary files for the Moment out so now i cant get my phone to DL mode, ive been searching since saturday night and have tried every Button combo posted and nothing, my phone will not turn on and ofcourse it isnt recognized by my pc BUT, ive noticed that only when its plugged in to the computer after trying to power it up several times it´ll vibrate then the 4 touch buttons will react to either the call or end button, also it makes the low battery sound and if i press the camera button it makes the volume sound but i CANT get to download mode, can i bring my phone back or is it done with? help please! and thanks in advance...
well, i would say boot into rrecovery by making the phone off either power button, or remove and replace battery.
next, you will need to press and hold in order: power/end call, call, and volume down.. this should boot recovery mode.
lastly, use the red scroll device to go to reset facory defaults or factory recovery, use common sense while looking. select with clicking and use arrow back button to go back to recovery main, then reboot to system. easy as pie.
Have you tried ODIN or ADB?
I have flashed the Intercept numerous times, soft bricked more than once, I was always able to recover using either the stock bootloader, CWM recovery, or flashing the ROM/Kernel directly using ODIN or ADB.
If you are still having these issues drop me a line and I'll gather some links together that should get you back up and running.
If the phone will not boot at all, even with a charged battery, I would definately try contacting Virgin Mobile and escalating the issue. I've had plenty of luck replacing devices claiming that the device just dropped dead without notice. They are usually good about sending out a replacement phone, and on rare occasions even giving you an upgraded unit if they are out of stock.
Good luck!
Did you use Odin or the swupdater?
Bug difference. Sounds like there's a missing boot loader.
Sent from my SPH-L710 using xda app-developers app
Hi, did you guys fix your bricked phones? Today I have bricked my Samsung transform (bad flash went with SW upgrade.
Only vibrates sometimes and the buttons flash a little, but no boot at all. Is there any chance to fix it? even with Jtag?
regards
hello
i reinstalled my ROM after installing FREEDOM and the google play wasn't working
i installed it about a month ago and it worked out fine, i rooted the phone again but didn't do anything with it
today after using the phone for a couple of hours i plagged the charger in and then i saw that the screen is all black
and all that says is :
fastboot mode started
udc start
i tried everything with the power + vol down and it keeps getting into the same screen
the phone just stuck in this and i can't recover it
i have read the other questions that people wrote here about this problem and couldn't find an answer
PLEASE HELP ME SOLVE THIS!!!
nir3011 said:
hello
i reinstalled my ROM after installing FREEDOM and the google play wasn't working
i installed it about a month ago and it worked out fine, i rooted the phone again but didn't do anything with it
today after using the phone for a couple of hours i plagged the charger in and then i saw that the screen is all black
and all that says is :
fastboot mode started
udc start
i tried everything with the power + vol down and it keeps getting into the same screen
the phone just stuck in this and i can't recover it
i have read the other questions that people wrote here about this problem and couldn't find an answer
PLEASE HELP ME SOLVE THIS!!!
Click to expand...
Click to collapse
I was in the same situation tonight. I have the AT&T variant. I found the answer on droidforum(dot)net by member HARVESTERX:
"OK, so you're booting into fastboot and trying to ADB from there? Have you tied booting into recovery (since you said that you were able to successfully flash one)? I'm on the Verizon G2 so not too familiar if it's the same on your model, but to get into recovery I power on the phone by pressing and bring the power and volume - buttons at the same time. After seeing the LG logo I have to release both buttons and press and hold power and volume - once more which takes me into the factory reset mode. From here press the power button a few times as if I'm doing a factory reset and it loads up TWRP from there.
This has saved my ass once already because I wiped my internal storage mount by accident and deleted all my backups and ROMs, so I used a Windows XP computer (can't get any other version of Windows to recognize my device...well I know how but it involves more time than I have at the computer as it's not mine) and pushed a ROM over using ADB that way. It's been a few days so hopefully you've fixed the issue... "
This method put me into TWRP and I was able to RESTORE my phone to the backup I had done earlier this evening.
I hope this helps!
JACE759
Hi,
My Nexus 4 is stuck in the Bootloop (where the Colored Dots fly around that should form the Logo) and I don´t know hat to do anymore. I´ve read dozens of threads but not a single Solution could be found...
I tried several Factory Resets and Cash Wipes with the Recovery Mode and Flashing Stock Android on it. I also just let it try to boot up over night, but after 8hours it was still stuck in the same Bootloop.
I´ve never Rooted my Nexus or something like that it was Stock Android all the time (haven´t used it since like half a year, when the Bootloop appeared first, but now i broke the Screen of my Galaxy Alpha which is too expensive for me to let it fix...).
One Thing thats different from many other People that get stuck in Bootloop is the fact, that after Holding the power button to power it down, i can enter the bootloader (where i can find recovery mode) if i only push the volume down button, not the power button. I also have to go into bootloader and select "power down", if i don´t want it to try and boot up again without me doing anything.
I apologize for my bad English (if it is, i´m not sure) and i´m thankful for every hint on what i could do, since Walking aroung without a Smartphone feels weird as f*ck
Greetz,
Slix
Slix37 said:
Hi,
My Nexus 4 is stuck in the Bootloop (where the Colored Dots fly around that should form the Logo) and I don´t know hat to do anymore. I´ve read dozens of threads but not a single Solution could be found...
I tried several Factory Resets and Cash Wipes with the Recovery Mode and Flashing Stock Android on it. I also just let it try to boot up over night, but after 8hours it was still stuck in the same Bootloop.
I´ve never Rooted my Nexus or something like that it was Stock Android all the time (haven´t used it since like half a year, when the Bootloop appeared first, but now i broke the Screen of my Galaxy Alpha which is too expensive for me to let it fix...).
One Thing thats different from many other People that get stuck in Bootloop is the fact, that after Holding the power button to power it down, i can enter the bootloader (where i can find recovery mode) if i only push the volume down button, not the power button. I also have to go into bootloader and select "power down", if i don´t want it to try and boot up again without me doing anything.
I apologize for my bad English (if it is, i´m not sure) and i´m thankful for every hint on what i could do, since Walking aroung without a Smartphone feels weird as f*ck
Greetz,
Slix
Click to expand...
Click to collapse
Is your bootloader unlocked? When you said you flashed stock do you mean you flashed a zip in recovery, or flashed it via fastboot?
I unlocked my bootloader and used the wugfresh toolkit to flash stock 5.1.1. in my nexus.
After hours of online search i finally found out how to "solve" my Problem. Apparently my power button was stuck (wrote sth. like that in my 1st post but wasn't sure yet), so i just slammed it on the desk with the side where the powerbutton is located and it worked!!
I think thats something you should tell everyone who is stuck in a bootloop an not even reflashing stock Android helps
Now i got the Problem that i can't fit my nano sim in the micro sim slot of the nrxus , wouls be nice if someone got an advice in this, but maybe i should just go and get an Adapter tomorrow
Greetings, Slix
If you do not have any data on it, you can reflash the whole device by downloading the nexus 4 factory image here https://dl.google.com/dl/android/aosp/occam-lmy47v-factory-b0c4eb3d.tgz
You will need adb and fastboot which you can get here http://forum.xda-developers.com/showthread.php?t=2588979 (if the latest version does not work use version 1.3)
Then simply unzip the factory image with 7zip and run
Code:
flash-all.bat
as admin
Ok so before I started writing this I had only one problem now I'm worried my problem has gone from bad to worse.
I updated my 6T to 10.3.2 from the latest Beta after the process it prompted for a restart, upon restarting it got stuck in the boot animation. I tried going into Recovery and Download mode unsuccessfully so I went through the forums a bit and saw that someone who had the same problem successfully entered Recovery mode by pressing VOLUME UP+DOWN+POWER buttons simultaneously, I tried to do the same and my phone turned off and now it doesn't turn on! :crying:
Has anyone experienced this or know how to fix this? Any help will be much appreciated. Tia!
theDUD3 said:
Recovery mode by pressing VOLUME UP+DOWN+POWER buttons simultaneously, I tried to do the same and my phone turned off and now it doesn't turn on!
Click to expand...
Click to collapse
These should be clarified:
Volume Up + Power while turning on will boot to fastboot.
Volume Down + Power while turn on will boot to recovery.
Holding Volume Up + Power should force the phone to turn off.
Volume Up + Volume Down should put your phone in Download mode for the MSM Tool.
Turn the phone off, let it sit. Then try turn it back on. Any response?
try to shutdown phone ...hold vol+ and power button for like 15 sec and restart your phone if this didnt work then u can try MSM tool
Thanks guys, got it working using MSM Tool!
regarding oneplus 6 got stuck on logo screen and recovery mode not working
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
frankynehemimah said:
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
Click to expand...
Click to collapse
You are likely going to lose your data. Know that going in if its not already backed up.
If you have the fastboot menu you can use the fastboot roms.
Or my least favorite option or what I would try last, MSM Tool (Tmobile 6Ts use a different tool).
IMPORTANT if you want to try and recover and data off your phone first, go to fastboot, and try and "boot" the TWRP img (not the installed one, one from your PC using the fastboot command). If that works you might be able to recover data. If that does worm, try dirty flashing the last ROM you were running and see if it boots.
No worries!
frankynehemimah said:
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
Click to expand...
Click to collapse
Hello, I am sorry to hear of you having this issue, I just went through 3 1/2 days (off and on) of recovering my T-Mobile OnePlus 6t which I found a way to get my unlock code within 2 weeks of having it, so I rooted it and put a custom kernel on it, stuck on 9.0 never let me update as I was not familiar with A/B partitioning, yet! The answers I saw to your questions were spot on, I just had a little to add to it and I'm sure I am not alone. Real quick let me list what has gone wrong on the rare occasion it hit the fan with the 6t...
- When I would accidentally and rarely let my battery die it seemed like it took forever to get it to reboot, I mean it sat on my desk of DOA devices for 2 weeks!
- It often seems like the buttons do not always respond properly and never have when I needed them to. Been through this before, I've bricked and unbricked and flashed and re-flashed and wiped all weekend and I like Android 10 and all but seems everything is different for every build, and everything seems to have to go in the right order with the exact right file or you wind up in a jam, period..
- That said, the previous person that answered your question has likely encountered similar, I've heard of right down to the buttons not physically working, but I have been a Smart Device Master III Technician for over 5 years, i know my buttons were not broken.
- Most likely culprit that I just handled and worked, i did have to use the MSM tool, several times - and re-unlock the BL, several times I would not even get the chance to get to fastboot, just a screen saying Build and Hardware not a match"" in yellow letters and it just bootlooped. No fastboot is no good, but when you said the tool would show some signs of working but then not, I have 2 solutions that I needed on diffrent occcasions.
1 - As mentioned fully try other USB cables, and ports, if you pull the usb-c out of the port and hold <power + vol up + vol down> eventually it will do something, very picky, sometimes gotta move your fingers to different spots on the buttons and also after 15-20sec let go of power and hit and hold it again... after a few seconds before it vibrates stick the cable in connected to your PC and the screen will be black (obv) but the msm tool will pick up on it. I know about the cables because I take good care of my phones and cables and charging ports, however on my final fix today it showed in msm tool it was connected but waiting for device.... Fed up i put the phone down and moved the usb cable a little bit and it picked up on it and did its thing! That part was just the cable, getting into qualcomm mode or w.e. is a bit tricky sometimes.
- Also someone said set it down for a while and come back to it.. THAT WORKS!! Let it fully charge and often just plugging in charger turns it on, bootloop soft brick or however have you, very simiilar to an Apple device and their DFU (don't f up mode cause screen is black..)
I hope that helps you get in touch with your family and friends.. Whatever you do, don't give up bc if you have not got it yet, you will! One other note, there are a few different msm tools available and they look the same some same size, but the one that supposed to work on my phone didn't and one that they say only a fool would attempt to try actually saved me, so if all else fails, use a different msm tool/usb cable and you will get it! I don't think I can post links yet I am on here very rarely, but plan on more! I have received so much help from XDA throughout the years on thousands of phones with just software issues alone, aas well as guides to my own phones. I would be honored to give back as I also have some extensive knowledge on many devices but I am a noob in comparison to many! Stay safe, good luck and please update and let us/ me know how it worked out for you. If i can help further I will, I have every firmware file for the OP6t, recovery, tools, software, this is not new to me but I feel your frustration!