Related
A few days ago, I tried to upgrade the firmware to the latest for the SDHC support and it the middle of it it froze.. I reset and only get the ASUS welcome screen.. A hard-reset produces a black screen and nothing more.
I've been searching this site for 2 hours trying to figure out how to fix my A626 .. I've found a bunch of things, but don't seem to be getting there.
I found the nk.nb0 file and tried putting that on an SD card.. Managed to figure out the bootloader thing.. If it's not plugged in via USB, I get a blank screen for a second, then "FAT16" comes up in blue on the top of the screen (in landscape orientation) .. It sits at that longer than I'm willing to wait (so far about 5 minutes) ..
I then tried it plugged into USB, i get a blue screen with all sorts of stuff about usb and "ready for download" .. I figured this is when the usbloader.exe would work .. But I get this far:
Attempting to open Intel PXA27X USB Development Board
FAILED to open \\?\usb#vid_0b05&pid_420f#5&85e63a3&0&3#{25dbce51-6c8f-4a72-8a6d-
b54c2b4fc835} 5
OpenUsbDevice::SetupDiEnumDeviceInterfaces fail 1
Failed to open (\\?\usb#vid_0b05&pid_420f#5&85e63a3&0&3#{25dbce51-6c8f-4a72-8a6d
-b54c2b4fc835}) = 0DEV not open
Click to expand...
Click to collapse
and when i try to load the .nb0 file using usbloader:
try to open \\.\wceusbsh001
try to open \\.\wceusbsh002
try to open \\.\wceusbsh003
try to open \\.\wceusbsh004
try to open \\.\wceusbsh005
USB pipe opening error
Click to expand...
Click to collapse
Is there something I'm missing here? I'm not too interested in modifying my rom or anything. I just want it to work again (preferrably with the update installed so I can use my new 4gb sdhc card.. which is the whole reason i bricked the damn thing in the first place) ..
I may just let it sit on this fat16 screen for a while.. get some rest or something.
Any help would be greatly appreciated!
whoa wait... after plugging the cable into the computer a few times it finally did something... seems like i'm loading SOMETHING onto it...
Ok wow, it's working now.. and whatever I loaded is supporting the sdhc card ... i'm happy happy..
figures i'd only solve the problem if i made an ass of myself on a message board
sorry for replying to an old thread.. but just wanted to know if you currently have windows 6.2 on your pda.
uhsarp said:
sorry for replying to an old thread.. but just wanted to know if you currently have windows 6.2 on your pda.
Click to expand...
Click to collapse
Never heard about WM 6.2 ... Currently it's WM 6.5
Dirk
this belongs in the Q&A section
thank you
Hi guys,
some time( 6 months) looking for an Android 1.6, 2.1, 2.2 stable for my HTC HD (Blackstone), but each have different views and more negative ,
I noticed that most systems Android Not Working GPS,Bluetooth, Photo Camera and some applications, but I think maybe someone has found a good version of Android,
Tell me a good and stable OS Android.
Now running WM6.5 Energy, Dinik Glass.Mar.21.
And it would be better if you say a few opinions about Android OS,
Worth the Android operating system on HTC HD ?
Thanks in advance.
EDIT :
- For those seeking a Good and Fast Android. Thanks to All for all ->>
- Looking at the bottom of pages to find everything you need
This is Android 2.2.2
For files to work Android 2.2.2 go to post # 62 is 3 files ,copi to folder where is Haret
Good Luck !
gadar said:
This is the best rom i ever had,
wifi works
cam works
I think bluetoth works too, I just started once and it founds other devices.
fast, and verry stable. I had it on for about 50h without any crash, after that i restarted due to wifi error.
With wifi on and doing some thinks, like smsing browsing, playing a game some minutes it lasted for about 11-12h.
I think if you having this rom in standby mode, it will propably last more than 12h, I haven't checked it.
With this rom and this rootfs, it works like a charm!
Rom:
http://htcandroid.xland.cz/FRX06_Full_Bundle_25.3.2011.zip
Rootfs:
http://forum.xda-developers.com/attachment.php?attachmentid=546462&d=1300543569
I forgot to mention that I have Energyrom, but i agree with the previous post.
Google goggles works too and every other app!
Good luck!
Edit: I have checked it, this FRX06_Full_Bundle_25.3.2011 is a 24h build
note that with no wifi enabled.
And the first build that do not get that warm when wifi is enabled
Click to expand...
Click to collapse
Nobody even give me an answer ?
I'm using Froyo 2.2.1 CBV2. It's a good and stable rom. Cam & Wifi works. So you can play around with this rom while waiting for a good CyanogenMod 7 rom
Good luck!
Edit: I advice you to change rom in order to overclock your touch hd. Energy rom looks flashy but it's very slow (no offence).. I used it for quite a while.. but when changing rom I saw the real speed of touch hd!
The Best!
This is the best rom i ever had,
wifi works
cam works
I think bluetoth works too, I just started once and it founds other devices.
fast, and verry stable. I had it on for about 50h without any crash, after that i restarted due to wifi error.
With wifi on and doing some thinks, like smsing browsing, playing a game some minutes it lasted for about 11-12h.
I think if you having this rom in standby mode, it will propably last more than 12h, I haven't checked it.
With this rom and this rootfs, it works like a charm!
Rom:
http://htcandroid.xland.cz/FRX06_Full_Bundle_25.3.2011.zip
Rootfs:
http://forum.xda-developers.com/attachment.php?attachmentid=546462&d=1300543569
I forgot to mention that I have Energyrom, but i agree with the previous post.
Google goggles works too and every other app!
Good luck!
Edit: I have checked it, this FRX06_Full_Bundle_25.3.2011 is a 24h build
note that with no wifi enabled.
And the first build that do not get that warm when wifi is enabled
I tried FRX06 too.. but it's not as fast as Froyo 2.2.1 CBV2.. You have to prepare you're sd card (making partitions and stuff; all explained here) but it's really worth it!
playerxl said:
I'm using Froyo 2.2.1 CBV2. It's a good and stable rom. Cam & Wifi works. So you can play around with this rom while waiting for a good CyanogenMod 7 rom
Good luck!
Edit: I advice you to change rom in order to overclock your touch hd. Energy rom looks flashy but it's very slow (no offence).. I used it for quite a while.. but when changing rom I saw the real speed of touch hd!
Click to expand...
Click to collapse
You says to overclock my HTC HD, but that does not mean that changes (overclock) to speed procesor to burn it ? Like a procesor of Computer EX: procesor curent speed 1800 GHZ off 3000+ (procesor product AMD) but if i change speed of 2400 GHZ if posible to burn it, corect ?
Could also work a 2,4,6,7 months time, and then burn the procesor ?
I had an experience with the HTC Touch Diamond and burned to overclock the processor to 528 MHZ I went up to 688 MHZ, and after 2 weeks after he died (CPU burn, I find that to the guarantee, I have a friend who works HTC Service and that verdict has given me )
I am a little afraid to do overclock the HTC HD after I lived experience
playerxl said:
I'm using Froyo 2.2.1 CBV2. It's a good and stable rom. Cam & Wifi works. So you can play around with this rom while waiting for a good CyanogenMod 7 rom
Good luck!
Edit: I advice you to change rom in order to overclock your touch hd. Energy rom looks flashy but it's very slow (no offence).. I used it for quite a while.. but when changing rom I saw the real speed of touch hd!
Click to expand...
Click to collapse
About Energy Rom Glass Dinik, version March 21,phone works super well and fast, I have this version of 4/5 days and are pleased.
But as I said, I want to try Android OS.
gadar said:
This is the best rom i ever had,
wifi works
cam works
I think bluetoth works too, I just started once and it founds other devices.
fast, and verry stable. I had it on for about 50h without any crash, after that i restarted due to wifi error.
With wifi on and doing some thinks, like smsing browsing, playing a game some minutes it lasted for about 11-12h.
I think if you having this rom in standby mode, it will propably last more than 12h, I haven't checked it.
With this rom and this rootfs, it works like a charm!
Rom:
http://htcandroid.xland.cz/FRX06_Full_Bundle_25.3.2011.zip
Rootfs:
http://forum.xda-developers.com/attachment.php?attachmentid=546462&d=1300543569
I forgot to mention that I have Energyrom, but i agree with the previous post.
Google goggles works too and every other app!
Good luck!
Click to expand...
Click to collapse
Need to do overclocking ?
And if not, and if you do not mind give me the steps how to install Android OS you mentioned above,
I need to do partition of 8 GB card ?? , Give me some more detailed installation steps,
Thanks
DjMaryuslive said:
Need to do overclocking ?
And if not, and if you do not mind give me the steps how to install Android OS you mentioned above,
Thanks
Click to expand...
Click to collapse
First of all XDAndroid will not replace WinMo completely, yet.
There's no need to do any overclocking. You can, but it might cause instability issues.
Also, there's not one package that just runs 'out of the box' on Blackstone (Touch HD).
They either have missing functionality (GPS, Google Apps, whatever) or you need to follow a certain installation procedure.
Check out if this works for you:
- Get the FRX06 bundle from the Touch Pro/Fuze thread, follow the installation guide there too, but...
- use the correct startup.txt and ts-calibration (attached to post)
- get the special Blackstone kernel and rootfs by g3rm0 (see my signature), and then with everything on the SD card...
- follow the steps i described and you should be a happy camper.
Noroc
DjMaryuslive said:
Need to do overclocking ?
And if not, and if you do not mind give me the steps how to install Android OS you mentioned above,
I need to do partition of 8 GB card ?? , Give me some more detailed installation steps,
Thanks
Click to expand...
Click to collapse
I have those partition on my 8GB card. But i dont know if that helps.
Look at this video on youtube, download that program and do exactly as he did.
http://www.youtube.com/watch?v=aCV7Eu1pjWQ&feature=related
And follow steps that hrk7474 said.
Thanks!
Yes, use that build first and than try to use Froyo 2.2.1 CBV2 ...
You've to find out what Froyo build is really working for you..
For FRX06 you don't have to make partition of your 8gb sd card
For Froyo 2.2.1 CBV2 you do.. but it works well and still faster than the FRX06 build..
You don't have to overclock your phone if you don't want to!
So it's up to you.. Android is not fully optimized for our blackstones yet.. most things will work... But it's not as fast as it should be.. That's why the overclocking can be handy!
But you'll have to find that out yourself... Good luck!
gadar said:
This is the best rom i ever had,
wifi works
cam works
I think bluetoth works too, I just started once and it founds other devices.
fast, and verry stable. I had it on for about 50h without any crash, after that i restarted due to wifi error.
With wifi on and doing some thinks, like smsing browsing, playing a game some minutes it lasted for about 11-12h.
I think if you having this rom in standby mode, it will propably last more than 12h, I haven't checked it.
With this rom and this rootfs, it works like a charm!
Rom:
http://htcandroid.xland.cz/FRX06_Full_Bundle_25.3.2011.zip
Rootfs:
http://forum.xda-developers.com/attachment.php?attachmentid=546462&d=1300543569
I forgot to mention that I have Energyrom, but i agree with the previous post.
Google goggles works too and every other app!
Good luck!
Click to expand...
Click to collapse
STARTUPS folder -> Blackstone where put the startup.txt file? together with the file: Haret, Android apps, conf, etc, etc?
Or leave them there in the folder Blackstone
i tri to instal android you gave me and is say : Waiting for SD Card and noting hapend
DjMaryuslive said:
STARTUPS folder -> Blackstone where put the startup.txt file? together with the file: Haret, Android apps, conf, etc, etc?
Or leave them there in the folder Blackstone
i tri to instal android you gave me and is say : Waiting for SD Card and noting hapend
Click to expand...
Click to collapse
As I'm sure is described in the installation guide in the thread where you got the FRX06 bundle from, yes, the startup goes where haret is.
By the way, have you looked at this thread at all?
'Waiting for SD' is the 3rd question dealt with in the FAQ. The fix worked for me when i had the SD-card issue. (I later removed it from the startup and my SD has been working fine
I further advise you to read the other threads as well and use the search function, because if this is your first serious attempt to run XDAndroid on a Blackstone i seriously doubt there's anything you will run into that nobody has experienced or dealt with before.
Don't get me wrong, we're all glad to help out eachother, but most of the answers are all over the forums already.
hrk7474 said:
As I'm sure is described in the installation guide in the thread where you got the FRX06 bundle from, yes, the startup goes where haret is.
By the way, have you looked at this thread at all?
'Waiting for SD' is the 3rd question dealt with in the FAQ. The fix worked for me when i had the SD-card issue. (I later removed it from the startup and my SD has been working fine
I further advise you to read the other threads as well and use the search function, because if this is your first serious attempt to run XDAndroid on a Blackstone i seriously doubt there's anything you will run into that nobody has experienced or dealt with before.
Don't get me wrong, we're all glad to help out eachother, but most of the answers are all over the forums already.
Click to expand...
Click to collapse
I already tried it and no response,otherwise you can help me ?
DjMaryuslive said:
I already tried it and no response,otherwise you can help me ?
Click to expand...
Click to collapse
There are two (tree) possible fixes for "Waiting for SD card" issue
1. Make sure it's formatted to FAT32 filesystem.
if that doesn't work than
2. Open startup.txt --> find set cmdline and add this: msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave
it that doesn't work either you can only try another card. My 8GB Transcend card refused to work so I had to buy an old class 2 SanDisk 2GB. Good thing they are dirt cheap now
g3rm0 said:
There are two (tree) possible fixes for "Waiting for SD card" issue
1. Make sure it's formatted to FAT32 filesystem.
if that doesn't work than
2. Open startup.txt --> find set cmdline and add this: msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave
it that doesn't work either you can only try another card. My 8GB Transcend card refused to work so I had to buy an old class 2 SanDisk 2GB. Good thing they are dirt cheap now
Click to expand...
Click to collapse
same problem,the problem is the card 8Gb,thanks
Pff....
I tried all the above versions of Android and without any results, after restart back to windows mobile phone, why ??
My SD Card doesn't seem to work, why?
Most SD Cards are working, but if you the 'waiting for SDCard' message, you should try one of these fixes (and please let us know if it works)
Fix 1: Format your card with this tool http://www.sdcard.org/consumers/formatter/
Fix 2: Edit your startup.txt file and add these red entries to your cmdline:
set cmdline "lcd.density=240 msmts_calib=0x395.0x3c9.0x79.0x77 clock-7x00.a11=500 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=-2,-1,3
msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave"
Fix 3: Tell your wife / girlfriend that you are about to make some modifications to her phone... change the ringtone and steal her old Class 2 SD Card to use with Android. She will never discover what you have done, and if she does, you'll be able to use Android to send texts to your former girlfriends ;-)
Copy and paste from:
http://forum.xda-developers.com/showthread.php?t=627749
Follow that if you having card problem.
Thanks
HELP
gadar said:
My SD Card doesn't seem to work, why?
Most SD Cards are working, but if you the 'waiting for SDCard' message, you should try one of these fixes (and please let us know if it works)
Fix 1: Format your card with this tool http://www.sdcard.org/consumers/formatter/
Fix 2: Edit your startup.txt file and add these red entries to your cmdline:
set cmdline "lcd.density=240 msmts_calib=0x395.0x3c9.0x79.0x77 clock-7x00.a11=500 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=-2,-1,3
msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave"
Fix 3: Tell your wife / girlfriend that you are about to make some modifications to her phone... change the ringtone and steal her old Class 2 SD Card to use with Android. She will never discover what you have done, and if she does, you'll be able to use Android to send texts to your former girlfriends ;-)
Copy and paste from:
http://forum.xda-developers.com/showthread.php?t=627749
Follow that if you having card problem.
Thanks
Click to expand...
Click to collapse
I have a big problem when you need to calibrate the screen ... but I do not look to the cross with calibrate the screen.
It`s Show me the screen and first cross calibration ( in top left corner ) for 2 seconds ( I do not see the calibration screen, how can I do if I can not see the calibration screen ? ) and then continues installing Android,after the installation is complet i can not use the touchscreen because is not calibrated.
I use Startup.txt and ts-Calibration,but .... no efect
Mention that the 8GB card is not working I found a 1GB card and it works
Or tell me how you've done and the steps that you made when you put the files on the card,
All Android versions have the same problem, HELP !!!!
Thanks
I think after the first corner the calibration spot will appear after that the other calibration spots wont show up, but just push each corner after you see the first top left cal.ponit, then efter when you have pushed all other corners and are about to push the top right corner push once again the top left corner then it should proceed as normal....Thats what i was expierenced with this FRX06 build.
Or just put calibriation file in the folder where haret is started, main folder. Startup file must also be there, both files is for your Blackstone. You will find Startup file in the STARTUPS folder and the calibrations file from the link below.
Here you have calibrations files for your blackstone:
http://www.neopeek.com/viewtopic.php?f=14&t=6420&sid=e6dc7b1623778926cd9a7596329049e7
Good luck.
Ok I barely bought this phone..I got rid of the Sidekick 4G..i got so tired of waiting for something good for it,but no seems to be playing around with this device. Anyways I need help flashing the HD2. I'm converting it to the Android OS and I cant seem to freaking pass the HSPL 4 usb connection. It keeps saying
" The procedure entry point CeSvcGetStringW could not be located int he dynamic link library CEUITIL.dll.
I tried replacing the CEUITIL.dll. but that didnt help. I also have windows mobile device and both tried active sink and file transer nothing works!!
Stupid Raptitool.exe keeps telling me errors.
What should I do?
bump good thread
ns1quick said:
bump good thread
Click to expand...
Click to collapse
You "bumped" a thread 5 mins after it was created??
@ OP
Make sure you have Mobile Device Centre installed.
I have a WinBook TW800 from Micro Center. I wanted to load Windows 10 on it, has anyone on here done this? Maybe you can give me tips\pointers on how to go about doing this; is the update method better or would a clean install be the ideal way? Thanks for your help in advanced.
Well I got my answer today while trying to do it via the update way. I got an error that my tablet wasn't able to upgrade because the OS is compressed something about Boot WIM. SMH.
sinister1 said:
Well I got my answer today while trying to do it via the update way. I got an error that my tablet wasn't able to upgrade because the OS is compressed something about Boot WIM. SMH.
Click to expand...
Click to collapse
I can help you install it, in fact, I can make a guide. I have the TW801 and everything is working properly.
TravisAntonio said:
I can help you install it, in fact, I can make a guide. I have the TW801 and everything is working properly.
Click to expand...
Click to collapse
Cool, I will appreciate it. Thanks.
Any luck on getting a guide posted
Sorry for taking ages, I totally forgot about this.
http://forum.xda-developers.com/windows-10/general/guide-install-windows-10-tw800-801-t3069958
is it for free?
Issues
I'm having issues too. I don't think the 800 has enough space to do the install. The 801 seems like a better option due to the 16gb of storage, vs the 8gb on the 800.
TravisAntonio said:
Sorry for taking ages, I totally forgot about this.
http://forum.xda-developers.com/windows-10/general/guide-install-windows-10-tw800-801-t3069958
Click to expand...
Click to collapse
I will try it this some time this week. Thanks.
No luck
Apparently I can't because the memory is full so I basically can't do anything with this POS. I can't back it up or restore it or add anything to it, it actually runs out of disk space when uninstalling stuff.
I successfully installed Windows 10 on my TW-801 I first installed internally (internal installation failed) and then installed again via the sdcard (so you have to burn the win image to the sdcard for the second install in addition to doing the download for the first install). The second time Windows 10 was activated. I am also running Ubuntu with VMWare on a virtual machine on this tablet. Windows 10 is alot better than 8.1 on this tablet. I think even though the internal installation fails it saves the Windows 10 activation code and the second install works because it is not a download and is directly from the cd or in this case the sd. Also, during the first download (that fails) two files are created on the c drive that I copied to the sdcard that I had already burned the win image on it - I don't know if that did anything or not.
Hello all! you're awesome!
I have this pc/tablet. I try to put a spanish language, and was impossible.
I decided to put a clean install of windows 10, and I crash it...
Now, all is in spanish, but there are some things that not work now: wifi, audio, touchscreen...
I know that it's a drivers problem. But there are not drivers for this product.
I hope that some of you can share with us (and me) an image of the original windows10 that come with the tablet, and maybe I can install.
Now...I lose 350$ in a few hours...
I want them too
i think the original Windows 10 installation image from Voyo with the drivers is here
Code:
https://9896df.lt.yunpan.cn/lk/cxxWj6pRmPTRi#/-0
but i cant make a account there to download it .....
can anyone help to upload it somewhere else?
This is for Voyo v3 mini PC as I can see not for Voyo V3 Vbook
Hi
you can find all folders & files from this China site also hire even Image of restoration
https://yadi.sk/d/9ixK06sZovfdq
stbn7777 said:
Hello all! you're awesome!
I have this pc/tablet. I try to put a spanish language, and was impossible.
I decided to put a clean install of windows 10, and I crash it...
Now, all is in spanish, but there are some things that not work now: wifi, audio, touchscreen...
I know that it's a drivers problem. But there are not drivers for this product.
I hope that some of you can share with us (and me) an image of the original windows10 that come with the tablet, and maybe I can install.
Now...I lose 350$ in a few hours...
Click to expand...
Click to collapse
do you manage to repair Windows dude
hire is all files from Voyo vbook V3 drivers,you can also with google translate use 4pda forum find many answers
I managed to get the drivers from their website after a lot of struggle. I uploaded them to mega just in case others need them:
http s://me ga.nz/#!hVB0Ea6Y (apparently I need a min number of posts to put links)
The decryption key is the following: !9fQTHbIb-H812jw2MwVOAPZoZvDGKuywgiRBkjkOwEE
The wifi driver is giving some security warning when you try to install it. I already had it working yesterday (using other drivers I found) so I decided to not install it when I saw the warning. The rest of them made my camera and touchscreen work properly though so they are good.
jeefo12 said:
I managed to get the drivers from their website after a lot of struggle. I uploaded them to mega just in case others need them:
http s://me ga.nz/#!hVB0Ea6Y (apparently I need a min number of posts to put links)
The wifi driver is giving some security warning when you try to install it. I already had it working yesterday (using other drivers I found) so I decided to not install it when I saw the warning. The rest of them made my camera and touchscreen work properly though so they are good.
Click to expand...
Click to collapse
I ordered ssd disk 128gb ,today arrive in Macedonia tomorrow i will installit on board to see will it work or not as expanded memory.
as i can see till now on my Voyo v3 ,i have oni one sticky button ,windows work geat..
with wifi(driver) i haven`t problems only yet but on 4pda.frorum(rusia) with google translate as a option in Chrom you can get best Voyo Vbook V3 community and best info for Voyo on the net..
jeefo12 said:
I managed to get the drivers from their website after a lot of struggle. I uploaded them to mega just in case others need them:
http s://me ga.nz/#!hVB0Ea6Y (apparently I need a min number of posts to put links)
The wifi driver is giving some security warning when you try to install it. I already had it working yesterday (using other drivers I found) so I decided to not install it when I saw the warning. The rest of them made my camera and touchscreen work properly though so they are good.
Click to expand...
Click to collapse
hey, what's the decryption key for your files man?
aussiepr said:
hey, what's the decryption key for your files man?
Click to expand...
Click to collapse
Sorry, I had no idea mega is encrypting it automatically. This is the key !9fQTHbIb-H812jw2MwVOAPZoZvDGKuywgiRBkjkOwEE (exclamation mark included)
jeefo12 said:
Sorry, I had no idea mega is encrypting it automatically. This is the key !9fQTHbIb-H812jw2MwVOAPZoZvDGKuywgiRBkjkOwEE (exclamation mark included)
Click to expand...
Click to collapse
Thanks, worked fine
Hi, I've recently bought the core m3 version off Gearbest, but ran into a ton of issues out of the box. As with all chinese tablets/laptops/convertibles I buy, the first thing I did was do a Windows reset (to get rid of any potential bloatware/localization issues/ etc/). However, since the reset, I have been unable to charge the device beyond 80%, the pen that came with it is not registering any input, and the touch screen input is waaaaay off (closer to my finger at the top left corner, then deviates further off the further I get from that point).
Now, I'm unsure whether these issues existed prior to the reset, or whether they were caused by it (since I didn't really use the device long enough before the reset). The easiest way would probably be to send it back to claim warranty, but the whole claim procedure through Gearbest is a nightmare at best. I would prefer to try everything possible before actually attempting that ordeal.
I would like to try installing a fresh copy of windows over the "reset" version to see if the potential driver issues are resolved, but am unable to find the proper installer for this device from the myvoyo website. The one available is apparently for the atom x5-Z8300 version of the device, not for the core M version. I did try the drivers from the link above in this thread, but it caused a WDF_VIOLATION bsod.
tl:dr Does anyone have ANY suggestions as to what I can try to fix these issues, or potentially have a link pointing to the correct drivers/windows installer I will need to get the device back to the factory settings? (I speak neither Chinese nor Russian so the company's website and the apparently thorough 4pda forum was of limited use to me - google translate is wonky at best)
Thanks and sorry for the long rant.
WooHoo!! Thanks that fixed my touch and wifi issues!
Do not hesitate to contact them directly via e-mail (the voyo manufacturer). I just did and they seem very helpful (or I am just lucky). I am currently trying to install Android on the machine with their help. If I get all the drivers to work I will post here everything needed + instructions in case anyone wants to do it as well.
---------- Post added at 09:02 AM ---------- Previous post was at 08:57 AM ----------
riyasatazim said:
Hi, I've recently bought the core m3 version off Gearbest, but ran into a ton of issues out of the box. As with all chinese tablets/laptops/convertibles I buy, the first thing I did was do a Windows reset (to get rid of any potential bloatware/localization issues/ etc/). However, since the reset, I have been unable to charge the device beyond 80%, the pen that came with it is not registering any input, and the touch screen input is waaaaay off (closer to my finger at the top left corner, then deviates further off the further I get from that point).
Now, I'm unsure whether these issues existed prior to the reset, or whether they were caused by it (since I didn't really use the device long enough before the reset). The easiest way would probably be to send it back to claim warranty, but the whole claim procedure through Gearbest is a nightmare at best. I would prefer to try everything possible before actually attempting that ordeal.
I would like to try installing a fresh copy of windows over the "reset" version to see if the potential driver issues are resolved, but am unable to find the proper installer for this device from the myvoyo website. The one available is apparently for the atom x5-Z8300 version of the device, not for the core M version. I did try the drivers from the link above in this thread, but it caused a WDF_VIOLATION bsod.
tl:dr Does anyone have ANY suggestions as to what I can try to fix these issues, or potentially have a link pointing to the correct drivers/windows installer I will need to get the device back to the factory settings? (I speak neither Chinese nor Russian so the company's website and the apparently thorough 4pda forum was of limited use to me - google translate is wonky at best)
Thanks and sorry for the long rant.
Click to expand...
Click to collapse
[email protected] . Contact them directly. I just did and they sent me the drivers for the cherrytrail version (though that's not exactly what I asked for). Keep your english simple and concise so they understand you. Theirs is quite bad.
Hi guys
The drivers doesn't work anymore.. someone has them?
i recently bought the voyo v3 ultrabook from gearbest and it constantly just shuts off without warning. this kills windows after a while so have reset it multiple times.
tried to return it to gearbest but the cost was like £60 and then the post office wouldnt touch it because it contained a lithium battery.
basically gave up and accepted £15 compensation from gearbest - would like to try android on this as i have some suspicion that the device could be ok. it can go for hours when windows is not fully booted ie when restoring windows so this could well be on OS thing. trying android would be a good test of this.
big waste of money and time really, note to self is only buy from local stores in the future! doh.
Voyo stays in blackscreen
Hi together,
I need your help. I have the v3 flagship with m3-6y30 and it stays in blackscreen.
I changed the win10 boot options to safe mode and now the screen stays black only. The 'caps lock' led is working. I tried to enter bios or uefi, but it does not work, or at least the screen stays black.
Next I will try to connect micro hdmi to a monitor and I hope that it will work. Another solution would be to write a new originial voyo win10 image to the m2 ssd. Could anyone provide me his ssd image? Maybe someone saved it after resetting win10? I asked voyo for that image, but they did not answer..
It would be great if someone could help me.
Regards
dschingi86 said:
Hi together,
I need your help. I have the v3 flagship with m3-6y30 and it stays in blackscreen.
I changed the win10 boot options to safe mode and now the screen stays black only. The 'caps lock' led is working. I tried to enter bios or uefi, but it does not work, or at least the screen stays black.
Next I will try to connect micro hdmi to a monitor and I hope that it will work. Another solution would be to write a new originial voyo win10 image to the m2 ssd. Could anyone provide me his ssd image? Maybe someone saved it after resetting win10? I asked voyo for that image, but they did not answer..
It would be great if someone could help me.
Regards
Click to expand...
Click to collapse
Could solve it. I can enter Uefi by pressing Esc and I had to use an external monitor.
hi dschingi86
i have a similar problem - I did a clean re-install of windows 10 pro and the screen stopped working. The backlight is definitely working - i can see it come on, but nothing is displayed on the screen. the screen still works for touch though.
It only displays when connected to an external monitor via hdmi.
i've tried reinstalling drivers etc, but nothing works - how do i get the screen to start working again?
How do you enter BIOS?
please help
hensk said:
I ordered ssd disk 128gb ,today arrive in Macedonia tomorrow i will installit on board to see will it work or not as expanded memory.
as i can see till now on my Voyo v3 ,i have oni one sticky button ,windows work geat..
with wifi(driver) i haven`t problems only yet but on 4pda.frorum(rusia) with google translate as a option in Chrom you can get best Voyo Vbook V3 community and best info for Voyo on the net..
Click to expand...
Click to collapse
What type of m.2 ssd drive does the Voyo v3 Pro use sata iii or pcie? What is the maximum size in gigabytes that the Voyo V3 Pro can use? Do you happen to have a image file of Windows 10 for the Voyo v3 Pro? The link to the image file on the Voyo web site no longer works.