Related
Hi,
Apologies in advance if I'm covering old ground.
I'm trying to re-flash a WM6 rom after my previous attempt just left me with the 4 colour screen permanently and as the links to mtty1.42.rar seem to be broken at the moment I decided to re-flash with a different rom.
the problem is that even though I can get the unit into boot-loader mode and the update software appears to see the BA when it checks versions etc. as soon as I hit the upgrade button the BA screen blanks and I get Error 112: CE ROM UPDATE ERROR.
I've tried different roms, different usb ports and different versions of activesync all with the same result.
Any help on this would be great and hopefully I haven't 'bricked' the unit.
Cheers
Duncan
Do you have PH20A2 or PH20B device?
mtty utility can be found using search button
It's a PH20B.
I've now found mtty after a fair bit of searching on other forums..now to see if I can make some sense of it's commands.
A further update: it seems that I've managed to corrupt just the OS part of the ROM. I managed a radio update successfully which means all the USB connection is fine for updating. It just can't access the OS part of the ROM.
Is there anyway to manually format that area of ROM so I can in effect install over clean unit? Infortunately I can't make sense of the mtty commands and don't know what memory address and for how log I should perform the format.
Cheers Duncan
try reflashing
You should know how to use search - however here is the link
http://forum.xda-developers.com/showthread.php?t=348030&highlight=mtty
(Is that hard to put "mtty" in the search field and set BA section only? )
Further update:
Now I don't even get the 4 colour screen. After soft and hard reset I get a dead device. I can put the device into bootloader mode (serial/usb) but as soon as the update software attempts to copy the rom across the screen blanks and I get the ROM Update Error.
Now my thought is to try and flash with the original rom for the device as I have another unit available but using the link from the BA wiki for dumping the ROM doesn't work. I have also tried searching for 'ROM Dump' within the BA section of the forum but there don't seem to be any definitive instructions for this, everyone just keeps asking why not use the wiki or search funtion....
I have used the wiki and the search funstion and I seem to be the first with this situation.
Soft Reset - Nothing
Hard Reset - Nothing
Bootloader - Able to flash the radio rom but as sson as i try to flash the OS rom the screen blanks and I get Error 112: CE ROM Update Error. When I take the device out of the cradle the screen comes back on with the Serial 2.xx screen and I'm back to square one.
I've tried to use the wiki to dump an exisiting working rom but the link on the wiki is broken. I have also searched the BA forum for these intructions but they're not covered as they're already in the wiki..... or not as the case is.
I appreciate you regular users get fed up with noobs coming on and expexting you to do all the work for them but so far I've spent 3 days searching both this site and others to try and resurect my device. I'm not dumb or lazy and would love to be able to do all this myself but without instructions I'm flying somewhat blind.
Any help would be great..... please??
[off topic]
no need for apologies...
we started once like you... some are far worse...
knowing one part and boasting with air on their heads...
since you managed to explain yourself on your first post.
knowing what to search (E.G. MTTY 1.42.rar)
you definitely searched the forum before you posted AND
you stated that the links are not working... that proves it.
we are the one who is sorry because some others think
that they are high and mighty, it sometimes blurs the opinion making.
i dont like opinionated people because i admit that am one too... sometimes...
but that doesnt mean i hate them...
[on-topic]
you never told us what happened when you tried the mtty procedure.
is your last post the result of your mtty experience?
please elaborate how did you end up with that... what did you do before you soft-reset and hard-reset?
SilverSamurai,
Thanks for the quick response.
After my last 'apparently' successful re-flash with Helmi's latest WM6 rom when I hard reset the device I had nothing but a blank black screen, no power LED or anything. Soft-reset was the same. I can reset into bootloader and the PC detects the device when I place it in the cradle. The first part of the update seems to work although it never detects the current OS installed, it always says upgrade from ' ' to 'ver 6.0.0' which is wierd because it always used to say the previous OS version. When I then hit next the progress bar shows on the PC but the BA screen immediately blanks and eventually the PC gives the ROM update error.
I have managed to re-flash the radio rom in this state which proved that I still have access tho the device from the PC.
Using mtty I can run through all the commands to recover from the 4 colour lines screen (even though I'm beyond that point).
USB>set 14 0
HTCST ÚÈÒHTCEUSB>task 28
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>task 0
USB>
It's almost as if the last flash didn't complete and has left the area for the OS 'dirty' with what ever it did manage to flash. What I was hoping to try was to re-format the entire OS section of memory and then try to re-flash again. Using mtty it says you can format sections of memory by stating a start address and the length you want to format but I don't have clue what these should be.
I've tried flashing with WM6, WM5 and a compatible version of 2003 with the same result every time. I would like to dump a rom from another BA I have and try with that but as mentioned earlier the link for that is down at the moment.
I think that's about it. If you need any more info let me know.
Many thanks
Duncan.
let's relist the things you did.
USB>set 14 0
Click to expand...
Click to collapse
1. start OS after a reset
result:
HTCST ÚÈÒHTCE
USB>task 28
Click to expand...
Click to collapse
2. format doc (Disc-On-Chip)
result:
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>task 0
Click to expand...
Click to collapse
3. do hardware clear boot.
Click to expand...
Click to collapse
since i dont want to experiment with my sole BA...
i tried to search for solution...
and with some of my computer instincts i came up with this suggestion...
try this command before "task 28"
"task 7 0" <-- this is the "Do flash ROM lock/unlock" command
"task 2a" <-- fix bad blocks on MFG bootloader and Storage
then try to reflash your BA.
my sources one | two
although it's not BA but i think mtty commands are generic.
it's worth a try.
SS,
Still no joy, it's exactly as it was before.
Just reading through some more posts for bootloader ant it seems at least one other person has the same problem - http://forum.xda-developers.com/showthread.php?t=345181&highlight=bootloader and no resolution posted for that either.
I think I may have got it beyond the point of return.
I've just tried to flash from the blank screen I end up with from the initial attempt and it still detects the device but fails in exactly the same way.
awww... im sorry to hear that.
but dont lose hope.
i'll try to read some more and search for solutions.
and i hope someone with the same problem as
yours that had their BA fixed comes to the foreground.
[off topic]
hmm... come to think of it... we're both Marvel SuperVillains
SilverSamurai said:
awww... im sorry to hear that.
but dont lose hope.
i'll try to read some more and search for solutions.
and i hope someone with the same problem as
yours that had their BA fixed comes to the foreground.
[off topic]
hmm... come to think of it... we're both Marvel SuperVillains
Click to expand...
Click to collapse
These steps are from my notes. Follow these steps. It worked for me last time i tried (3 months back)
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
i think he did all of those already,
that's why i posted this in response to his mtty experience.
wouldnt hurt to try it again though.
A bit more info:
I tried the mtty solution again but still the same result.
I finally managed to find the instructions for dumping and exisiting rom to SD card and pulled one from a working unit. I put the card into the faulty BA and booted into bootloader. Pressed 'Power Button' to flash from card and it appeared it was going to work........ until it got to 12% then it failed with the message 'Download Fail'. So still no better off.
What I'm going to try now as it seems anything is worth a try is use the address ranges used to dump the rom to try and format all 3 sections. See if that will give me a clean base to try and re-flash from the sd card. My only worry is if it will format the section of ROM used to store the bootloader info.
I'll post my results shortly.
Now I need to know how to get the bootloader password to enable me to use the 'erase' command through mtty.
The hunt coninues....
Yet more developments.
As the update from SD failed I thought I'd see if it was possible to dump the current contents of the rom to SD using the following
“d2s 80000000 02000000“
“d2s 60000000 00300000 sd a“
“d2s 70000000 01080000 sd a“
The first 2 commands completed fine and checksum was OK. On the 3r command 'd2s 70000000 01080000 sd a' it errored with the following result
USB>d2s 70000000 01080000 sd a
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SDetected one card
SD:ready for transfer OK
pc->drive.total_lba=1E8000
pc->drive.num_heads=0
pc->drive.sec_p_track=0
pc->drive.num_cylinders=0
pc->drive.block_size=200
pc->drive.features=0
pc->drive.RCA=B368
pc->drive.drv_type=40000000
pc->drive.securedAreaSize=0
pc->drive.securityDrv=0
pc->drive.busWidth=1
pc->drive.erasedSize=0
Total card size=3D000000
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
DOC_ReadBinary is fail: dwStartAddress=0,dwReadSize=40000.
DOC_ReadBinary is fail: dwStartAddress=0,dwTempReadLength=40000.
*DOC_ReadBinary is fail: dwStartAddress=40000,dwTempReadLength=40000.
*****************************************************************dwCheckSum of Storage=95609D16
cSectionNum=2
psImageSectionInfo[cSectionNum].dwCheckSum=0
psImageSectionInfo[cSectionNum].dwLength=1080000
Stored image of SD/MMC card checksum error!
Now my guess is the Doc_Read_Fail bits are the corrupt part of the rom. If I can find a way to repair these I could then try re-flashing the rom.
what was "task 2a"'s result?
i think that's the chkdsk option of mtty.
we're dissecting the innards of the bootloader.
little by little as we go along the way...
im learning something, i hope you can find the fix for your problem.
SilverSamurai,
Thanks for the help you gave but the unit has finally had enough and totally locked. No power or anything no matter how I try to reset it. I've tried charging for hours, discharging for hours, left the battery out for hours but to no avail. It seemed to take exception to me dumping the rom contents to the SD card. Maybe there was a hardware problem ?? Not sure.
I'll have to see if I can wangle another unit from the company I work for as we're currently selling a bunch that were purchased for a failed IT project on ebay.
it was sad to hear/read that.
anyways. at least we tried to revive it. but dont throw it away.
maybe someday there will be ways how to ressurect your BA.
Happy Computing! err... Mobile Computing!
Hi, i searched and couldnt find anything... I just installed ubuntu and have been dual-booting with windows Vista for several weeks now. My question is im a windows (redheaded step)child and im not too familiar with linux' inner workings yet...so i have not been doing anything to "safely remove" my G1 when in ubuntu, cuz i thought that such an option doesnt exist...problem is now i think ive corrupted all my data on my SDcard and i was just hoping that someone could tell me how to do this correctly in ubuntu? Do i hafta mount it, and THEN unmount it before i should unplug it? I dont even know if this is the problem, but ive been watching my logcat and it gives me some Dbus error when i plug in USB and it doesnt come up on the phone with option to mount SDcard, and windows doesnt recognize my device anymore. Pretty sure i corrupted my SD, im pretty sure i can fix it without help, if someone could just tell me the proper procedure for removing devices from ubuntu? thanks in advance...
-BMFC
I dual boot ubuntu on my mac OSX, which emulator are you using (fusion VM, virtualbox etc...?)
(1) When you've properly mounted your SD card it should show up on your ubuntu Desktop. Just go to Places > Desktop and you should be able to eject the SD card (two if you are partitioning them and AppstoSD) by pressing the "eject" button. The SD card should show up in the left window pane.
(2) Also, you probably have corrupted your SD card and are going to have to reformat it, losing all of your data.
(3) Somewhere in your emulator there should be a USB button to see which devices are plugged into your host computer, and which ever one you select your emulator will read.
(4) Finally, you don't provide enough information for a real answer...
(a) What ubuntu are you running?
(b) Do you have appstosd?
(c) have you done a nandroid backup?
(d) Which emulator/virtual environment are you running?
Hope this helps.
In Nautilus (the file manager) there will be a little orange eject symbol next to the drive. Clicking it will unmount the drive, which you should ALWAYS do before pulling any kind of removable media out of the socket. Unmounting is the *nix equivalent of "ejecting" in Windows.
If you're running a command line setup, the command to unmount is
Code:
sudo umount /media/(insert mount name here)
Hope that helps!
I too dual boot and noticed they i wouldn't get the "usb connected" on the G1. After some tweaking a few options; i noticed I would get the USB connected IF my usb debugging was ON. [settings- applications- developement- usb debugging]. I have to check for Ubuntu and uncheck for windows. I hope that helps
you see the problem is that ive never actually mounted my G1 in ubuntu, i just plugged it in to charge...so i never had to unmount it and theres no "safely remove" function, that i could find, so i figured that linux was just secure enough that it didnt require safely removing devices....oops...in answer to your questions, first im not running any VM...im ACTUALLY dual-booting. i have windows vista and ubuntu Jaunty running side-by-side, on a compaq presario f700. I DO have USB debugging ENABLED, and right now im running JF1.42rc33 still, im prolly gonna be wiping and upgrading to SOMETHING today, i was kinda just holding off cuz i like my theme, but my phones f-in up so nows as good a time as any to start fresh. I dont use a2sd, just my caches for market, browser, and maps are on sd. Ive been having trouble on my g/f's hp Pavilion pc running windows vista...we both have g1's and HERS is stock, unrooted, and she just got the OTA a couple days ago, since then the computer has been hating on MY phone, it says the drivers screwed and it wount bring up the option on my phone to mount the sdcard. hers still works fine, and mine still works fine hooked up to my laptop, just not hers...so i dunno if THATS a cupcake issue or if its cuz i didnt remove it from ubuntu right...im gonna format my sd AND wipe my phone, and ill get back to you guys moentarily, thanks for all your replies.
-BMFC
If all you were doing is charging, and you didn't mount it, then your original assumption was correct. You don't need to unmount something that was never mounted.
mm0
ok well then somebody help me out with this: i have tried for two days to get my sdcard to format, and IT JUST WONT. I cant get it to even be recognized by my girlfriends computer, but her G1 running UNrooted TMOCupcake still works fine, kinda makes me wonder if hers didnt get some kinda updated driver packed with it? The cupcake, i mean, not the phone...i dunno. Anyways my phone WONT mount in ubuntu at all, it shows up but when i try to mount it it says "No media on Volume" and wont open it at all. so in windows it ACTS like its doin everything i want it to do...i tried to format my sd yesterday and i sat here and watched it the whole time, and when it finshed it said: "Format Completed SUCCESSFULLY." so i SAFELY REMOVED IT, unplugged and plugged back the usb, and when it came up EVERYTHING WAS STILL THERE!!!! my problem seems to be my sdcard/doom folder...it tells me that the folder \doom is ENTIRELY UNREADABLE.
ahem...on a side note, all these things happened at once...(same day)
1. My g/f got the OTA cupcake update...
2. I updated some apps from the market, the one that im suspecting right now is called "Cards(-)" by Coderminus. After i updated it, i went to play Doom, and instead of playing like usual, when i hit the "Play" button, it just exitted to home. So i checked my logcat and the Cards(-) app caused ALL KINDS of runtime errors, and so i uninstalled this app.
3. My market starts crashing all of a sudden. I cleared the cache and it SEEMED to fix it...for now.
4. Uninstalled Doom (ver. 1.29.666) and then went and deleted my doom folder.(I thought) Reinstalled newest version of Doom (ver. 1.31.666)
5. Tried to redownload the WADs to play, and i could get it to play, as long as i didnt try to download the sound files. Everytime i tried to get the sounds, it would act fine, but then when id go to play the game itd just exit to home again....
6. Repeated step 5. like 6 times....
This was all like 2 days ago? 3 days ago? and ive been messing with it ever since, and my PHONE is fine, but my SDCARD appears to be, for lack of a better term, ****ED. i cant even format it, ive tride 3 times, it just all comes right back when i plug it back in...i even tried to put an update.zip in my sdcard and update from JF1.42RC33 to (I was gonna try Dude's 1.2b) so i put that in there, and removed it and when i went into my file manager on the g1, the update wasnt there! i cannot seem to be able to make ANY changes to my sd...SOMEONE PLEASE HELP ME!!!
-BMFC
Try ti format your card from within your phone. Unfortunately that's the only issue I can help you with.
Edit: try doing a system wipe on your girlfriends phone from the recovery menu. It should solve the crashes. You will wave to reinstall all your apps tho.
ubernicholi said:
Try ti format your card from within your phone. Unfortunately that's the only issue I can help you with.
Edit: try doing a system wipe on your girlfriends phone from the recovery menu. It should solve the crashes. You will wave to reinstall all your apps tho.
Click to expand...
Click to collapse
I...didnt even know that was possible...im not seein any options to do that...you know some terminal commands for that or somethin? Cus when i got into my file manager (i use aFile, cuz it has wireless transfer) i cant even delete anything from there, ANY folder i try to delete it just says "Failed to delete (folder name)"...so if you know how to do that then hook me up and ill try it...
-BMFC
EDIT: i think you misunderstood, THERE'S NOTHING WRONG with my girlfriends phone...its just that she got the US OTA and it happened at the same time as all this other, so i thought maybe it might have had some effect on how mine interfaces with her comp...honestly i doubt it, but until someone tells me im wrong im not ruling it out...
On your phone Goto your settings menu, sdcard and phone memory, unmount your card and then select format
No dice, seems you may be on a diff. ROM than me, i dont have that option, i unmount the card, and thats all that happens, it unmounts it...no format option...
-BMFC
Damn that sucks. Does your girls phone have that option? I wish I could help you out. But I'm at a loss
Sdcard IMPOSSIBLE TO FORMAT....need ADVANCED help!!!
hi i posted a thread here for help, and i did so cuz i need help from someone INTELLIGENT. The mods have now moved my post to the "General section" of the dream forum, where i cant get **** for help. The reason i didnt just post in that section, where it goes, is CUZ NO ONE CAN OR WILL HELP ME OVER THERE....i need a devs help or somethin...THATS why i posted in the dev section...cus its pointless to try to get support from end users...i might as well just sit in the bedroom with NO COMPUTER asking MYSELF what the answer is...so first off id like to thank the AWESOME mods here for burying my post head-high in a section that i cant get any support in, EVER. THEN, id like to ask some dev(s) or SOMEBODY, SOMEBODY INTELLIGENT, please go to
this thread
and read, and im BEGGING you for help!!! To whoever helps me figure this out i would gladly donate to WHATEVER cause you have!!!! Honestly, if you ONLY read MY posts, you wont miss anything important, except some guy with the SAME SKILL LEVEL AS ME telling me to wipe SOMEBODY ELSES PHONE and see if that works...****.
SOMEONE PLEASE try to help me out before the AWESOME mods here at xda move this post, too. Im not sorry im posting in the wrong secrtion cuz this is where the help is and thats REALLY what i need right now. So MODS, you can move my posts all day long, ill just make a new one linking to the old one till i get some support...suspend me...BAN me, i dont care, ill just keep coming back with new usernames and accounts until i get some help, cuz THATS WHAT THE F*CK SUPPORT FORUMS ARE FOR. Im really pissed at whatever mod moved my post, cuz the SECOND i posted that thread initially, i got like 4 or 5 replies, thats why i LOVE this forum, cuz it has GREAT SUPPORT, when you can actually get your question seen by a dev, that is. but as soon as my post got moved i got several replies from one DUMBASS that was TRYING to help, and ill give him that he was just tryin to help, but i have a problem with my phone, and this guy tells me i should WIPE MY GIRLFRIENDS PHONE. WOW. Just wow. Someone please go read my problem and post there, or post here, with some answers....MODS PLEASE DONT MOVE THIS THREAD I AM TRYING TO GET SOME HELP!!!!
-BMFC
yea *****ing like a 4 year old will you nowhere. no one owes you anything.
If you have a camera, try using that to format your memory card. Hope it works.
lol ok first off take it easy on the mods here, i'm speaking of your other post, they try to keep these forums clean and it isnt an easy job all things considered.
the way i see it you have 2 options.
1. Throw your card in a digital camera and use the camera to format it. I works most the time when a computer wont, several times my pc wouldn't recognize/format a card but my ****ty digital camera had no problem.
2. if that doesn't work, splurge the $8.99(or less) it costs to get a new sd.
I've even seen 8gig class 6 cards for around $20 and 4gig class 4 cards for $10.
edit: wow just a min too late
Hey guys,
first, im sorry for opening a new thread, but none of the other threads helped me.
I bought a HTC Touch 3G Clone in China:
ROM: 2.706.2
QUALCOMM 7225
528 Mhz
RAM: 192MB
NEXPERIA SY.SOL 5209
Windows 6.5 Chinese
HardSLP doesn't work. It cant get a connection to the phone, although ActiveSync has one.
Then i tried to upgrade with my 1gb sd-card. But none of the button-combinations of this forum work.
I tried some other comb. and found three of them:
green button + red button + power --> reset config
vol up + vol down + power --> calibration screen
vol up + red button + power --> a white screen with "downloading"-label
vol down + red button + power --> a green/white screen saying: Checking valid image file
I think the last one is important to install a new rom. After 10 seconds it says:
Step 3 error while updating
Card operate: read retry timeout
Then i tried several rom-versions posted here. Nothing happens.
I just want an english operating system...
I really hope someone can help me. Its driving me crazy...
Thank you for your help.
Buddy close this thread & go 2 Touch 3G General -where u have posted ur thread- & read other threads, many can help.
HSPL does not work 4 cloams!! & also u can't use those custom ROMs on cloam!
check http://forum.xda-developers.com/showthread.php?t=580367&page=3 but make the "hxxp" correct!
Also http://forum.xda-developers.com/showthread.php?t=657212 links.
Search more, u will find stuff. If u follow the General forum related 2 cloams (clones) u will get more! U shall use a ROM working 4 cloam. Mine is T3238+, I'll try 2 help as far as my knowledge lets me!
Thank you for your help.
Sure, I can post my problem there. But I already read them and it didnt help. I tried both of the ROM-files. I get the same error:
Step 3 error while updating
Card operate: read retry timeout
I have a 1GB sd-card, formated in standart windows-fat-format.
I think there must be another button-combination for the update mode.
But like i said none of the combinations mentioned in the board work, and there are plenty of them...
In your second link I have seen:
3) Boot into TF Update Mode by holding the Green + Confirm + Red + Power Button
I tried it, nothing happens (if the confirm button ist the round big one in the middle)... What should I do?
Hi again,
Yes, confirm = big button; only use the ROMs 4 cloam phones not those 4 real 1s.
Seems that ur phone starts reading the file but stops in the middle, this means u have gone 2 update mode, only it can't continue; try another SD card.
-- Mine is Touch 3G T3238+. By far NO key comb. has worked 4 me. Seems that these cloams don't have a booter like other 1s.
I turned off my phone -> connected it 2 PC w/ WMDC -> Vol. down + green + power => a menu screen appeared!! w/ options like "update OS", "update logo" & ...
C if this works 4 u, though "update OS" did not work on my phone but mine has sum other problems 2, so u give it a try.
-- Turn ur phone off, insert the SD & just turn it on normally, this shall start reading SD.
Don't make the card as FAT 32 (though not possible!), only FAT or FAT 16.
Don't put the ROM in a folder on SD, let it be on the root directory.
-- Once open SD w/ ur phone -as u open e.g. "My document" - & c what message it shows? Does it even read the card??
Thank you very much for your help. I finally made it.
The trick ist to use a ROM with a .bin-format and rename it to "k3img.bin"
The update mode doesnt accept other names.
I flashed my phone to windows mobile 6.1 eng. version.
Now i have a bunch of other problems. Bad key mapping, no camera... and the biggest problem: the phone doesnt find any storage cards.
Under Settings-System-Memory it says: "Total storage card memory: Not installed".
What can i do? I need that extra storage.... And now i cant get into the update mode because windows deleted the old button map. Tried any combination, doesnt work.
Please help.
Hi again,
Well, I am a noob myself!! unfamiliar w/ these phones!! but I think keys problem is bcoz of the ROM; though it is installed, but it's not the proper 1!
Check http://forum.xda-developers.com/showthread.php?t=662170&highlight=QUALCOMM seems that this "first aid" has helped!!
Trying another ROM, BUT now that u can't use SD ......!! also the PC does not run .bin or .upr files!! Mayb if u change the file 2 .exe, it gets installed (of course after sync.!)
2 get 2 update mode, c if connecting 2 PC (my prev. post) does any good!!
I don't know any way; In sum days I shall go 2 the phone service center 4 my phone; I'll ask 2 c if they knew any way & [/I]if if they let me know about it[/I]!!
pringo said:
Hi again,
Well, I am a noob myself!! unfamiliar w/ these phones!! but I think keys problem is bcoz of the ROM; though it is installed, but it's not the proper 1!
Check http://forum.xda-developers.com/showthread.php?t=662170&highlight=QUALCOMM seems that this "first aid" has helped!!
Trying another ROM, BUT now that u can't use SD ......!! also the PC does not run .bin or .upr files!! Mayb if u change the file 2 .exe, it gets installed (of course after sync.!)
2 get 2 update mode, c if connecting 2 PC (my prev. post) does any good!!
I don't know any way; In sum days I shall go 2 the phone service center 4 my phone; I'll ask 2 c if they knew any way & [/I]if if they let me know about it[/I]!!
Click to expand...
Click to collapse
Hey, I finally got it! I installed WM 6.5 ROM and my SD Card works! Key mapping is bad and the cam doesnt work but I dont really need it. The storage card was important. Now im really happy.
Thank you so much for your help! The "first aid kit" really helped in combination with the k3 IDT. You are my hero!
If somebody experience the same problems, I can explain in detail what I have done!
WOOO.........W, SO HAPPY 4 u I wish u find another ROM in future 2 make other stuff work 2!
U shall mostly thank others!! ......... OK, have fun w/ ur SD 4 now,,,, Hope it stays this way!!!!!!
hi i have the same trouble in a t3238 clone, i need to change the rom but i cant, can you help me writing step by step all procedure ? and where can to find the .bin roms = thanks
Ok I barely bought this phone..I got rid of the Sidekick 4G..i got so tired of waiting for something good for it,but no seems to be playing around with this device. Anyways I need help flashing the HD2. I'm converting it to the Android OS and I cant seem to freaking pass the HSPL 4 usb connection. It keeps saying
" The procedure entry point CeSvcGetStringW could not be located int he dynamic link library CEUITIL.dll.
I tried replacing the CEUITIL.dll. but that didnt help. I also have windows mobile device and both tried active sink and file transer nothing works!!
Stupid Raptitool.exe keeps telling me errors.
What should I do?
bump good thread
ns1quick said:
bump good thread
Click to expand...
Click to collapse
You "bumped" a thread 5 mins after it was created??
@ OP
Make sure you have Mobile Device Centre installed.
Hello guys,
Yesterday my DigiLand DL801W asked me for the win10 update, so i downloaded the update, let it configure, then it asked me on what drive i wanted it, i picked my sd card, so it was installing itself so i let it for diner, when i came back my tablet was rebooting evry 4 seconds, it starts, do the loading circle, then a window pop up like 0,5 sec and it say after restoring your previous version of windows and reboot
Does anybody know how to stop that?
Thanks
EquimoX said:
Hello guys,
Yesterday my DigiLand DL801W asked me for the win10 update, so i downloaded the update, let it configure, then it asked me on what drive i wanted it, i picked my sd card, so it was installing itself so i let it for diner, when i came back my tablet was rebooting evry 4 seconds, it starts, do the loading circle, then a window pop up like 0,5 sec and it say after restoring your previous version of windows and reboot
Does anybody know how to stop that?
Thanks
Click to expand...
Click to collapse
That generally means there was an error while it was updating to Windows 10. I would recommend updating your BIOS (which worked for my computer) and/or update important drivers. Unfortuneately, there is no one size fits all answer to this problem (to my knowledge).
IronManMark20 said:
That generally means there was an error while it was updating to Windows 10. I would recommend updating your BIOS (which worked for my computer) and/or update important drivers. Unfortuneately, there is no one size fits all answer to this problem (to my knowledge).
Click to expand...
Click to collapse
Ok thanks, but, how do i update my bios or even my driver if my tablet is like rebooting every 4 seconds?
Do i need to do a keyboard combinasion at the start screen with the loading circle?
EquimoX said:
Ok thanks, but, how do i update my bios or even my driver if my tablet is like rebooting every 4 seconds?
Do i need to do a keyboard combinasion at the start screen with the loading circle?
Click to expand...
Click to collapse
Ah, I missed it was in a loop. I hate to break it to you, but if it is stuck at the loading circle, it could be a very low level problem. Do you have recovery media?
IronManMark20 said:
Ah, I missed it was in a loop. I hate to break it to you, but if it is stuck at the loading circle, it could be a very low level problem. Do you have recovery media?
Click to expand...
Click to collapse
What do you mean by very low level problem?
No i don't,
I got the win 10 files on my flash drive, can't i see if there a log or something that say what is the error who caused this?
EquimoX said:
What do you mean by very low level problem?
No i don't,
I got the win 10 files on my flash drive, can't i see if there a log or something that say what is the error who caused this?
Click to expand...
Click to collapse
Essentially, your computer goes through a few steps when it is starting up. First, it loads the BIOS, which is stored on a chip on your motherboard. Then it loads an OS loader. Then it loads Windows. You can see here for more on the process (if you want an indepth look). When it is loading Windows it goes through a few steps, as mentioned in that post. Normally, when there is a problem with booting, you can try to go into Safe Mode by holding the F8 key. You should give this a try. If that doesn't work, you have bigger problems. At that point it is very likely that Windows is broken such that the built-in tools are not able to , and you will have to recover or re-install. You will then probably want to create recovery media.
EDIT: As to a log, I do not think you would be able to find one. I don't know of any error checking at that level, since it hasn't loaded much of the operating system. Of course I could be wrong.
IronManMark20 said:
Essentially, your computer goes through a few steps when it is starting up. First, it loads the BIOS, which is stored on a chip on your motherboard. Then it loads an OS loader. Then it loads Windows. You can see for more on the process (if you want an indepth look). When it is loading Windows it goes through a few steps, as mentioned in that post. Normally, when there is a problem with booting, you can try to go into Safe Mode by holding the F8 key. You should give this a try. If that doesn't work, you have bigger problems. At that point it is very likely that Windows is broken such that the built-in tools are not able to , and you will have to recover or re-install. You will then probably want to create recovery media.
EDIT: As to a log, I do not think you would be able to find one. I don't know of any error checking at that level, since it hasn't loaded much of the operating system. Of course I could be wrong.
Click to expand...
Click to collapse
I don't have any data on this tablet, so i might just do an re-install, do i just need to put windows on a usb stick or do i need to do something else?
EDIT: I just looked at the files on the sd card, there is files with text in them:
"rollbackinfo" in folder "Rollback":
[Flow]
CurrentPhase=SafeOS,Start
CurrentOperation=32,end
OperationResult=2147943792
[BootEntries]
DownlevelCurrent={2D27CA4F-9B99-11E3-9D11-9483277031A5}
DownlevelDefault={2D27CA4F-9B99-11E3-9D11-9483277031A5}
[BootManager]
Timeout=30
[OldOS]
ConnectedStandby=Yes
Compressed=Yes
[RecoveryPartition]
Backup=Yes
Info.Rec=0,10658775040,4859101184
InfS=0,240123904,10418651136
And another named "location" on folder "WIMBoot.backup":
[WinRE Location]
Partition offset=10658775040
Relative path=\Recovery\WindowsRE
On the second one can't i just put another location and install a full brand new windows on it?
i guess you have access to another PC, if so use the media creation tool (https://www.microsoft.com/en-us/software-download/windows10) to create a bootable USB stick and try reinstalling win 10
Sequeezer said:
i guess you have access to another PC, if so use the media creation tool to create a bootable USB stick and try reinstalling win 10
Click to expand...
Click to collapse
It won't even notice the usb stick, it only want the sd card, because when i remove it, it says to me to put it back in and press ok on a dialog window
Did you ever get this figured out? I'm dealing with the exact same issue here.
Silent Patriot said:
Did you ever get this figured out? I'm dealing with the exact same issue here.
Click to expand...
Click to collapse
No, still got that stupid boot loop...
EquimoX said:
No, still got that stupid boot loop...
Click to expand...
Click to collapse
Update:
They sent me back a replacement tablet with 8.1 on it and forgot to send back my 32GB SD card. Just a tad miffed. I know I'll get it back, but am extremely concerned about allowing the new one to try and update to 10.
_____
Gave up and got an RMA to send it in for repair. Should get it back with Windows 10 loaded on it. FYI - the standard warranty is only 90-days, and I'm within that timeframe, so it's covered. Hope yours is as well, but not sure how they're handling this for out-of-coverage units.
I also same problem. Please help me to get my table PC again.