Database Users

[Q] stuck in google logo

Hi,
I am using cynogenmod 7.1.0 RC 1.5 -jordan
I am stuck in Google logo why playing with recovery.
I read that I need to flash with sbf in boot to get back to normal
I have a problem since I am in 2.3.5 how can flash
with JRDNEM_U3_3.4.3-36-1.7.sbf
This isn't the above sbf is 2.3.4 ?? or I am missing something ?
I have got this sbf from defy wiki
http://forum.xda-developers.com/showthread.php?t=1093352
I have another question how can I CG version ?

sparkriver said:
Hi,
I am using cynogenmod 7.1.0 RC 1.5 -jordan
I am stuck in Google logo why playing with recovery.
Click to expand...
Click to collapse
Do these steps:
Auris 1.6 vvt-i said:
You are stuck in bootloop since you didn't do a clean wipe before flashing the SBF.
Press and hold Vol- and Power button. When you get to the android with yellow exclamation mark, press Vol- and Vol+ simultaneously and then wipe data/cache.
Done!
If I was getting a dime every time I have given this solution, I'd be driving a Ferrari by now
Click to expand...
Click to collapse
sparkriver said:
I have a problem since I am in 2.3.5 how can flash
with JRDNEM_U3_3.4.3-36-1.7.sbf
Click to expand...
Click to collapse
You can't. 2.3.5 is BL6 (I believe) and you want to go back to a BL4 sbf - no way.

did all you have said .
cleared cache and clear data still not booting beyond google logo
what to do now ?
"I have pressed stock recovery when I end up like this"

one more thing blue light appears and than all the below touch button flash once..
Since I can't go back and flash above sbf.
with what can I flash ??

Questions go in the Q&A section

sparkriver said:
one more thing blue light appears and than all the below touch button flash once..
Since I can't go back and flash above sbf.
with what can I flash ??
Click to expand...
Click to collapse
2.3.5 is Gingerbread kernel based and CM 7.1 - Froyo-based (as far as I can remember). Since you see the blue light, this means you have access to the boot menu and recovery mode, so just flash a GB kerne-based ROM and your phone will be fine. You can flash MS2Ginger by Walter79, for example, or you can flash Quarx's CM9 ICS builds (follow my tutorial in Defy General section)

Struck at the google logo. Nothing works after that. Tried with rsd but battery went down and unable to load Sbf.
Please help out

sunil_defy said:
Struck at the google logo. Nothing works after that. Tried with rsd but battery went down and unable to load Sbf.
Please help out
Click to expand...
Click to collapse
I too have this problem few weeks ago when I try about 6 ROMs.
I remember I forgot to wipe data and dalvik at the time of installing WIUI ROM and I have different recovery play with.
So just do one ... 1. In the recovery section go to the custom recovery and try wipe cache, and dalvik and them reboot.
2. If above step doesnt work them at the time when mobile starts .. then you see blue light glowing for some seconds ,,, when you see it press " volume down button ". you see again a stock recovery menu. In that do wipe cache and dalvik and then reboot.
In the 2nd method at the time of recovery if you see cant mount cache before wiping then may be you have to do RSD Lite procedure.
RSD lite and SBF :- http://forum.xda-developers.com/showthread.php?t=1093352
it a simple procedure. Just follow steps and you come with your official foryo 2.2.2
After that you can again install custom ROM.
Because it happens to me also. My phone shows me that there is no space in my mobile i.e phone memory is full.
So so RSD lite procedure and again back to froyo and then again install 4.1.1. jelly bean and now everything work good.

Defy Flash Bootloader Err:A5,70,39,00,27

Hello mates,
this morning I've taken to update the defy of CM10-20120810 to 20120904 CM10-last (had 2.3.4 kernel "kernel-gb-234-451-134-signed")
but after upgrading, has given me the battery fault that I was 100%
I tried several times to put him the Fix battery, but nothing at all ...
so I've taken to "Flashing" the Defy, first I tested with
ME722BL6.sbf
later with
rom_froyo.sbf
and when I RDSLite says "the phone is beein Rebbot" or something .. I restart, get the Motorola logo disappears .. and goes blank ..
and puts me in RDSLite "Finished" and "PASS"
Defy but does nothing ... and when I press the power button is switched off, give it back, turn again as "Bootloader" with the following error
Err: A5, 70,39,00,27
I've also tried to say next. "sbf"
bl7-2.3fix.sbf
526krfix.sbf
Vodafone and the original:
JRDNEM_U3_3.4.2_179-4.4_VFSBLUR_SIGN_SIGNED_USAJRDNEMARAB1B8VFES03A.0R _PDS03C_USAJRDNFRYOVFES_P028_A018_M002_HWp3_Servic e1FF.sbf
all with the same result ...
can help me???
I'm already not to do ... took all day ..

Which stock ROM were you on? If you flash the same ROM again, you should not have this problem. This happens mostly if you flash a ROM with lower BL than the current one on your phone.

andr0idfreak said:
Which stock ROM were you on? If you flash the same ROM again, you should not have this problem. This happens mostly if you flash a ROM with lower BL than the current one on your phone.
Click to expand...
Click to collapse
The first SBF i put, there rom_froyo.sbf (original from motorola i think)
before i try to upgrade to CM10-20120904 i have kernel 2.3.4 and i think that the same "rom_froyo.sbf", because i made only one time Flash with RDSLite...
from first and unique flash with RDSLite, only i made update from recovery mode - install zip from sd
only put cm7, cm9 and cm10, then the Gapps... and the last time when upgrade to cm10 i made, install cm10.zip, install kernel 2.3.4, and install gapps...

Any idea about the firmware version?

andr0idfreak said:
Any idea about the firmware version of rom_froyo.sbf ?
Click to expand...
Click to collapse
i have no idea..
i think that is 2.2 from motorola
i get it from HTCMania
w w w. htcmania.com/showthread.php?t=219893
but now links are not valid...

As you flashed ME722BL6.sbf, you are now on BL6 and I assume that's a Defy+ ROM, so no downgrade to Froyo. Try flashing the ME722BL6.sbf file again and don't flash froyo ROM on top of it. If it gets stuck on M logo, go to recovery and do a factory reset.
If you have a greenlens defy, you can no longer use the camera.

andr0idfreak said:
As you flashed ME722BL6.sbf, you are now on BL6 and I assume that's a Defy+ ROM, so no downgrade to Froyo. Try flashing the ME722BL6.sbf file again and don't flash froyo ROM on top of it. If it gets stuck on M logo, go to recovery and do a factory reset.
If you have a greenlens defy, you can no longer use the camera.
Click to expand...
Click to collapse
I have normal defy, with red lense (bayer)
the principal problem now is that can not made nothing... only it put in white led when i connected to usb...(no combination (power+vol+ or power vpl-) made nothing)

Try this: Pull out battery. Keep volume + pressed. Insert battery and then press power button. It should now enter bootloader mode. Connect it now to PC and then flash SBF with RSD.

andr0idfreak said:
Try this: Pull out battery. Keep volume + pressed. Insert battery and then press power button. It should now enter bootloader mode. Connect it now to PC and then flash SBF with RSD.
Click to expand...
Click to collapse
I'm trying to charge the battery via USB cut,
red wire to positive and black to negative,
I'll leave loading an hour or more, and try again.
what "sbf" do you recommend that put in defy? BL6 or BL7 ...
Could you put the recommended "sbf" links?
thanks.

Charging on unregulated USB for an hour can kill your battery
Sent from my MB526

Moved to Q&A. Please post all questions there.
Sent from my HTC Glacier using xda premium

did you fix it?

Guys please help me
iam in BL7.When i flash the bl7 sbf .First i get bootloader code courrpt message .then i remove the battery it show the message bootloader err:A5,69,4E,00,41
Rsd lite 4.9,5.6,5.7 did not detect my defy .iam format my laptop two times .it detect my defy .pls guys help me from the problem

ela1103 said:
Guys please help me
iam in BL7.When i flash the bl7 sbf .First i get bootloader code courrpt message .then i remove the battery it show the message bootloader err:A5,69,4E,00,41
Rsd lite 4.9,5.6,5.7 did not detect my defy .iam format my laptop two times .it detect my defy .pls guys help me from the problem
Click to expand...
Click to collapse
What defy you have: red, green or plus? You cant install lower rom than 188. If you have plus - you'll have all things working, red - battery can make work with batt fixes, green - camera will never work on BL7, only on CM10,CM9.1 or other roms with custom kernel. You're stuck on BL7 so try flash 231 sbf. Read this post, you'll find more info: http://forum.xda-developers.com/showpost.php?p=12419400&postcount=3

Plz Help
gark81 said:
Hello mates,
this morning I've taken to update the defy of CM10-20120810 to 20120904 CM10-last (had 2.3.4 kernel "kernel-gb-234-451-134-signed")
but after upgrading, has given me the battery fault that I was 100%
I tried several times to put him the Fix battery, but nothing at all ...
so I've taken to "Flashing" the Defy, first I tested with
ME722BL6.sbf
later with
rom_froyo.sbf
and when I RDSLite says "the phone is beein Rebbot" or something .. I restart, get the Motorola logo disappears .. and goes blank ..
and puts me in RDSLite "Finished" and "PASS"
Defy but does nothing ... and when I press the power button is switched off, give it back, turn again as "Bootloader" with the following error
Err: A5, 70,39,00,27
I've also tried to say next. "sbf"
bl7-2.3fix.sbf
526krfix.sbf
Vodafone and the original:
JRDNEM_U3_3.4.2_179-4.4_VFSBLUR_SIGN_SIGNED_USAJRDNEMARAB1B8VFES03A.0R _PDS03C_USAJRDNFRYOVFES_P028_A018_M002_HWp3_Servic e1FF.sbf
all with the same result ...
can help me???
I'm already not to do ... took all day ..
Click to expand...
Click to collapse
Hi Frnd,
How you solve this problem, I have the same problem...
Plz, help me.... in Advnc Thanx......

Defy not booting after froyo sbf flash, not going into stock recovery or bootloader

My Defy had CM7.1, running well. I tried to upgrade to CM9 after making a nandroid backup. During first boot, i was stuck at 'wizard has stopped' when i touched the android icon.
I tried to restore my nandroid backup, but phone booted into recovery.
Then i tried to flash JRDNEM_U3_3.4.2_177-005_NORDIC_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTNORD_P003_A001_HWp3_Service1FF.sbf
through RSD lite 4.9 but probably battery was drained, as i could not get the phone to boot after pass message, just a white LED and phone not detecting on RSD lite and not going into boot loader.
With macgyver hack, my pc could recognize the phone and i have flashed a number of ROMs but phone never boots.
While rest all sbfs were froyo, i also flashed
3.4.2-179-002-tmobile-froyo-fixed.sbf
T-mobile froyo bootonly.sbf
and
Tmo_2.2.1-3.4.2-107-boot-devtree-ONLY.sbf
Please help what should i do to get my defy back? I dont have warranty cover.

avionics49er said:
My Defy had CM7.1, running well. I tried to upgrade to CM9 after making a nandroid backup. During first boot, i was stuck at 'wizard has stopped' when i touched the android icon.
I tried to restore my nandroid backup, but phone booted into recovery.
Then i tried to flash JRDNEM_U3_3.4.2_177-005_NORDIC_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTNORD_P003_A001_HWp3_Service1FF.sbf
through RSD lite 4.9 but probably battery was drained, as i could not get the phone to boot after pass message, just a white LED and phone not detecting on RSD lite and not going into boot loader.
With macgyver hack, my pc could recognize the phone and i have flashed a number of ROMs but phone never boots.
While rest all sbfs were froyo, i also flashed
3.4.2-179-002-tmobile-froyo-fixed.sbf
T-mobile froyo bootonly.sbf
and
Tmo_2.2.1-3.4.2-107-boot-devtree-ONLY.sbf
Please help what should i do to get my defy back? I dont have warranty cover.
Click to expand...
Click to collapse
after macgyver hack flash one sbf. go to stock recovery and wipe your data/chage.
Than you sould flash again one froyo. And it will work. Good luck.
I had same problem when i went back to froyo. I forgot to wipe date/chage and it didn't boot.

defy bricked
Blazs said:
after macgyver hack flash one sbf. go to stock recovery and wipe your data/chage.
Than you sould flash again one froyo. And it will work. Good luck.
I had same problem when i went back to froyo. I forgot to wipe date/chage and it didn't boot.
Click to expand...
Click to collapse
The phone just does not turn on, stays on blank screen, so i can not go to storck recovery to wipe data / cache.

Hi
flash JORDN_U3_6.36.0
this is froyo on BL6.

This happened to me too!!! has this alredy been fixed???

Same problem
Hi together, well I hope this is the right place.... I'm owner of a motorola Defy MB 525 that ran without any problems on cm9 nightly for last 6 month. Now suddenly it doesn't start any moer andIi can't access recovery setup nor anything else so it's impossible to wipe anything, too. When connected to my notebook only the white LED is shining but nothing happens. The typical "hardware-found-ping" appears and several seconds later the " hardware was removed ping." The right drivers are installed on my notebook, but even RSD Lite doesn't found my Defy so I can't flash enything. Anyone has any Idea what to to?
Thank's in advance for any help!
Heddi

Heddi72 said:
Hi together, well I hope this is the right place.... I'm owner of a motorola Defy MB 525 that ran without any problems on cm9 nightly for last 6 month. Now suddenly it doesn't start any moer andIi can't access recovery setup nor anything else so it's impossible to wipe anything, too. When connected to my notebook only the white LED is shining but nothing happens. The typical "hardware-found-ping" appears and several seconds later the " hardware was removed ping." The right drivers are installed on my notebook, but even RSD Lite doesn't found my Defy so I can't flash enything. Anyone has any Idea what to to?
Thank's in advance for any help!
Heddi
Click to expand...
Click to collapse
I have the same problem.
But RSD Lite saw my defy, but when RSD Lite send phone to reboot after flash - nothing happening.
I've tried a lot of SBFs from h*t*t*p://sbf.droid-developers.org/umts_jordan/list.php but nothing helping.
My defy show only two screens: 'SW Update In Progress...' and 'SW Update Complete' and nothing new on display.
Maybe my battery discharged and McGyver hack doesn't help....

Defy: Can flash only one sbf
rendevor said:
I have the same problem.
But RSD Lite saw my defy, but when RSD Lite send phone to reboot after flash - nothing happening.
I've tried a lot of SBFs from h*t*t*p://sbf.droid-developers.org/umts_jordan/list.php but nothing helping.
My defy show only two screens: 'SW Update In Progress...' and 'SW Update Complete' and nothing new on display.
Maybe my battery discharged and McGyver hack doesn't help....
Click to expand...
Click to collapse
I also have the same problem. Did you find any solution for the same.

sarvranjan said:
I also have the same problem. Did you find any solution for the same.
Click to expand...
Click to collapse
Try to flash the file mentioned here. This did the job for me.
http://forum.xda-developers.com/showpost.php?p=40959834&postcount=3
Good luck!

[Q] Help, I think I have REALLY bricked my defy!

About a month ago I installed a clockwork based recovery app from the market. I tried restoring and this failed leaving the phone unbootable.
Since then I have tried flashing MANY other sbf`s using rsd lite but this has made the situation worse. I think that I even flashed one for the defy+
Now all I get is either a blank screen or a M logo when I switch on.
Pressing power & volume down doesn`t work so I can`t access the stock recovery menu
I can access the bootloader using power & volume up so i can flash more sbf`s but I`ve tried most of them but none will boot.
BTW the phone was running cm7.1 before I had all this trouble and the battery has been fully charged (in another defy)
Is there any way I can clear off all the stuff I`ve been installing and start from fresh? or can anyone tell me how to get the phone to boot?
I have searched for a solution in the forums but most of the replies involve clearing the cache which I cant do as I cant get to the recovery menu.
Any helpful comments will be gratefully received
many thanks
Jeff H

Your flashs complete with Finish/Pass, or just "please manually power up this phone"?
If it's the later, read this http://forum.xda-developers.com/showpost.php?p=38187413&postcount=2
Just stick to the most highest Defy+ sbf build, or just use DFP-231 build to be sure.

intemptesta said:
Your flashs complete with Finish/Pass, or just "please manually power up this phone"?
If it's the later, read this http://forum.xda-developers.com/showpost.php?p=38187413&postcount=2
Just stick to the most highest Defy+ sbf build, or just use DFP-231 build to be sure.
Click to expand...
Click to collapse
Thanks for the reply
I flashed the DFP-231 sbf file as you suggested but it wouldn`t boot any further than the M logo.
I did get the "please manually power up this phone" message and followed the procedure from the link you gave
I can`t wipe the as I cannot get to the recovery menu.
Is there any other way to wipe the cache?
JeffH

Nah, no other way than stock recovery for stock rom.
Just make sure your flash finished with Finish/pass, that'll make your stock recovery working again.
Wish you a best luck.

i flashed with this:
DEFYPLUS_U3_4.5.1-134_DFP-231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf
but still no boot
Is this the correct rom?
cheers
JeffH

I wonder if the following might give someone a clue about whats wrong with my defy
If I flash gingerbread rom either defy or defy+ then rsd completes with PASS, and phone will boot as far as the M logo and I can access the menu with power+volume UP
If I flash below gingerbread then rsd doesnt complete but gives `manually reboot` message. If I then power off and plug in again then rsd completes with PASS but when I reboot there is NO M logo and no menu on power and volume up.
I`m keeping my fingers crossed that I will be able to revive my phone.
JeffH

With DFP-231 rom, how about power+volume down to boot into stock recovery? I think you're just one step away from reviving defy.

intemptesta said:
With DFP-231 rom, how about power+volume down to boot into stock recovery? I think you're just one step away from reviving defy.
Click to expand...
Click to collapse
No, Power + volume down doesn`t work, (ie nothing happens). Only power + volume up works.

Try this http://forum.xda-developers.com/showthread.php?t=1595013

Vicsa said:
Try this http://forum.xda-developers.com/showthread.php?t=1595013
Click to expand...
Click to collapse
Thanks, but it didn`t work. Still stuck at M logo. Obviously I couldn`t clear the cache before and between flashing
JeffH

Thank you all for your helpful advice.
I have now sent the phone away for repair.
I spoke to the technician on the phone and she reckons it needs dismantling and a jtag repair (whatever that is).
But beware an app on the market, I think it is called orange backup, as it was after installing this and trying to restore the backup that I screwed up my phone!
JeffH

[Urgent help] I really need a Dev. Seriously.

Hello guys! This is my first post so please don't hate me.
I have an old Defy which I need to use because my current smartphone is broken. But I have some problems:
My Defy is a MB525 but months ago I've flashed an MB526 (Defy +) SBF and since then my Defy became a Defy+. The problem is: It's stucked on bootloop (M of death) and I CAN'T GET TO STOCK RECOVERY.
I try everything:
- Flashed all Defy MB525 SBFs = white led (of death) and screen off
- Flashed a lot of Defy + SBFs = only one "worked". It's the DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF this rom is the only one who makes my phone boot.. into a bootloop without stock recovery.
I don't have problems to recognize the phone on RSD Lite, my drivers are up to date and my battery is 100% (universal charger for hours). I try to revive this phone almost everyday. I'm using a Defy MB525 (used to be a Claro Brazil rom) with a MB526 rom and BL 7. I remember that one day I was able to flash a chinese rom and the system used to boot, but I couldn't get more than five minutes of use, the system crashed and rebooted. Don't know if this is important but anyway.
I just need to get to the stock recovery. I'm beggin you guys to help me because I really don't know what else to do.
Thanks very much for your understanding I'll be very glad if someone help me out.
Best regards.
PS: I really need your help DEVs, I'm not a noob but this is beyond my comprehension :crying:

Have you tried going to stock recovery after flashing DFP-231? It's not possible that the stock recovery is missing. Switch off the Defy, hold the power and volume down buttons simultaneously till a triangle with a ! mark appears. Then press both volume up and volume down simultaneously to get stock recovery. Then wipe data and cache and try again. If it still doesn't work, it looks like a hardware problem.

hotdog125 said:
Have you tried going to stock recovery after flashing DFP-231? It's not possible that the stock recovery is missing. Switch off the Defy, hold the power and volume down buttons simultaneously till a triangle with a ! mark appears. Then press both volume up and volume down simultaneously to get stock recovery. Then wipe data and cache and try again. If it still doesn't work, it looks like a hardware problem.
Click to expand...
Click to collapse
0. read beginners guide
1. charge battery (ext. charger)
2. factory reset from stock recovery if possible
2a. if not flash dfp-231.sbf (may end in bootloop)
2b. wipe data in stock recovery (should work now)
3. reboot
now you can root , install recovery
Sent from my MB525 red , froyo 2.2.2 german blurless service.sbf, as stock rom

Same thing, but more descriptive.?
Sent from my Nexus 7 using Tapatalk

Guys I REALLY cannot go to the stock. Seriously I don't know why. I know how it works and it really seems like missing! I'm doing everything right!! It's a dead end :crying::crying::crying::crying:
Is there any way to flash only the recovery apart from a full SBF? I read about ADB also. If I could make ADB see my device when it's in bootload I could try some commands, right? But I think ADB just works when the phone is alread booted.
Thanks again for your help DEVs!

sorry for double post
Hey guys I figurated something! My defy only boots (into the bootloop) to this four Defy + SBFs. They are all BL 7 I think.
4.5.1-134_DFP-188
4.5.1-134_DFP-231
4.5.1-134_DFP-2311
4.5.1-134_DFP-2312
Any other SBF (MB525 or MB526) get me to the black screen and white led.
Don't know if this helps but anyway.. Still not able to go to the recovery.

Those SBFs are BL7s. Anyways, if you're not able to enter stock recovery then most probably you're doing something wrong. Watch some videos on YouTube on how to enter stock recovery. It is simply impossible for the stock recovery to be "missing". I may be able to help you on hangouts though.
Sent from my Nexus 7 using Tapatalk

bro,
have you faced any defects in volume controll previously.
It may be due to faulty volume switch, which essentialy need to enter recovery.
Sent from my MB526 using Tapatalk 2

hotdog125 said:
Those SBFs are BL7s. Anyways, if you're not able to enter stock recovery then most probably you're doing something wrong. Watch some videos on YouTube on how to enter stock recovery. It is simply impossible for the stock recovery to be "missing". I may be able to help you on hangouts though.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Hotdog I really appreciate your concern but I'm doing it right, seriously. I know that when you boot to the recovery a green android with an exclamation point appears, and then you press vol up + vol down BUT I CAN'T GET THERE. THERE IS NO ROBOT. NO LIVE. NO HOPE :crying:
Sorry I'm a sentimental mood I love this phone so much. I'll try to record the defy boot with my lazy webcam later
pradeeppk said:
bro,
have you faced any defects in volume controll previously.
It may be due to faulty volume switch, which essentialy need to enter recovery.
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
Hey bro! The vol buttons are working because sunday I flashed a "fixed sbf" based on my DFP-231 SBF and try to go to the stock recovery but instead it lead me to a bootloader failure. It means that the command was sent, but the system was corrupted.
I was thinking about "mixing" a NANDROID with this SBF and flash it via RSD LITE, is it really possible? I was able to mix SBFs before, it changed the M logo but lead me to the same "bootloader error"..

If bootloader is ok.....
Sound's like hardware problem...
Have you error output in RSD during flash process ?
Sent from my MB525 red , froyo 2.2.2 german blurless service.sbf, as stock rom

Lame webcam record
Hey guys!! I made that video showing that I have no recovery. I know, there is no quality in this video because its an old (very old) webcam. Anyway the first time I try to go to recovery and the second I enter on the bootloader to show that the buttons are ok
https://www.youtube.com/watch?v=q-vovcdpQ0s

That URL is for some other video?. Anyway, I found the video in question. It looks as if volume down isn't working, so I guess the fault is with the volume button. Most probably the bootloop will be fixed by a data wipe in stock recovery.

hotdog125 said:
That URL is for some other video?. Anyway, I found the video in question. It looks as if volume down isn't working, so I guess the fault is with the volume button. Most probably the bootloop will be fixed by a data wipe in stock recovery.
Click to expand...
Click to collapse
Sorry I fixed the video right now. The button is working, I make sure of that. **** it, guess this fancy brick with a M letter is all I got.
Anyway thanks for your support guys. I've discovered something in my unbrick mission: I learned that Linux is a great operating system, better then windows, and will probably be my primary OS from now on.