Database Users

[Q] Defy M motorola locked boot and recovery will not open!

good night friends!
I'm here asking for this help not for lack of looking for the solution, sorry my bad english, I'm from Brazil and I
defy caught in a bootloader, I tried almost everything I found here in the forum, but most of the problems is
reset solved by making the recovery, but in my defy the recovery does not open, the flash works only power + vol up, already
I spent several roms to no avail, could someone help me run my recovery? grateful heart
list of roms flashead
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P011_A010_HWp3_Service1FFJORLA_U3_3.4.2_107-7_R02_SIGNED_USAJORDMR1B15CLABRLA019.0R_JORLAFROCLABRLA_P009_A008_M002_HWp3_Service1FF.sbfz
JORLA_U3_3.4.2_107-7_R02_SIGNED_USAJORDMR1B15CLABRLA019.0R_JORLAFROCLABRLA_P009_A008_M002_HWp3_Service1FF.sbf
JRDNEM_U3_2.34.1_DEBLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA02B.0R_USAJORDANRTCEE_P029_A019_HWp3_Service1FF.sbf
JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA030.0R_USAJORDANRTFR_P043_A010_HWp3_Service1FF.sbf
JRDNEM_U3_2.59.0_CHN_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA035.0R_USAJORDANRTHKTW_P021_A015_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_117-002_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB035.0R_USAJRDNFRYORTGB_P003_A002_HWp3_Service1FF
JRDNEM_U3_3.4.2_164-003_VFBLUR_SIGN_SIGNED_USAJRDNEMARAB1B8VFFR03A.0R_PDS03C_USAJRDNFRYOVFFR_P028_A014_M004_HWp3_Service1FF.sbf
Motorola_Defy_Nu___Android_2.2_FroYo
shadow_defy_2.3.3_85_Orange

If you turn it on while holding "dolume down" do you get the android+! screen? Some go into recovery if you touch the bottom right corner of the screen, but on some you have to hold volume up + down together. I had this problem today!
If you actually can't get to the screen with the android+! then I don't know what else you could do :-(

mmec2 said:
If you turn it on while holding "dolume down" do you get the android+! screen? Some go into recovery if you touch the bottom right corner of the screen, but on some you have to hold volume up + down together. I had this problem today!
If you actually can't get to the screen with the android+! then I don't know what else you could do :-(
Click to expand...
Click to collapse
I really can not, no way to go to the screen with the robot android! he goes right on the logo motorola M!
can it be hardware problem?

1) Did you use the correct flasher? rsd4.9 with motorola driver installed properly.
2) If (1) not working, you could use motorola own service update from their site.

farsight73 said:
1) Did you use the correct flasher? rsd4.9 with motorola driver installed properly.
2) If (1) not working, you could use motorola own service update from their site.
Click to expand...
Click to collapse
I'm using motorola rsd 4.9 with updated drivers, what happens is install the rom normal after reboot gets stuck in the Motorola M logo, the software update site does not recognize my phone, do all these roms that I would be no my phone?
im tried this roms now
JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA030.0R_USAJORDANRTFR_P043_A010_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_117-002_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB035.0R_USAJRDNFRYORTGB_P003_A002_HWp3_Service1FF
JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF
3.4.3_11-Stock.UKTmobile_BLUR
but no results!

don't worry about it, dude.
maybe you can try the way followed:
1.power off your defy;
2.remove the battery from the phone;
3.plug the usb cable into the phone without battery;
4.open RSD and chose one of the roms your listed, but 3.4.2-177-005 NORDIC prefered,
5.take the battery into your phone, now your can see the "connected" on RSD;
6.click the "start" button to flash;
7.wait the phone reboot completely, usually it'll reboot.
if not reboot, remove and on your battery, power on your phone, then press the "volume - and power" botton together, you can enter the robot screen, press volume up and down botton together, usually you can enter the recovery, then chose wipe 3 and 4, totally you can save your defy~~

Be sure to have enough battery while flashing..

Get the phone into bootloader (hold volume down when switch on) and flash an SBF like one from the list you've attached using RSD lite. Surely you have used RSD Lite before?

It seems you have the same issue I have on my Defy as per this thread: http://forum.xda-developers.com/showthread.php?t=1095444
I’m also unable to get into recovery or get to the Android Robot screen using “Power + Volume Down”. Hopefully we will be able to figure it out and get this issue fixed.

jdearauj said:
It seems you have the same issue I have on my Defy as per this thread: http://forum.xda-developers.com/showthread.php?t=1095444
I’m also unable to get into recovery or get to the Android Robot screen using “Power + Volume Down”. Hopefully we will be able to figure it out and get this issue fixed.
Click to expand...
Click to collapse
This same friend, I have the same problem, is this a hardware problem? I move the roms but not normal
Vol I login recovery - + Power key

http://forum.xda-developers.com/showthread.php?t=966537
Try flashing nordic, if fails arabic, if fails, 2.3.3, if fails probably corrupt nand broken hardware.
Before and after every flash always try to access recovery (volume down) and WIPE. reboot and wait crossing fingers, if it fails to boot flash next sbf, try to go recovery + wipe; reboot, cross more fingers; if fails to boot try next sbf and repeat.
The reason for this is that you can flash a lower version but it wont boot, so you have to flash a higher and higher version until you get one that works.

I tried to help someone with this problem before to no avail!
Everyone who is saying just wipe in recovery, or just flash with RSD blah blah blah, need to understand that he CAN NOT access recovery and HE HAS flashed multiple roms using RSD 4.9, read the OP. Im convinced this is physical hardware failure or similar. We all know the drill to recover our precious defy's in the event of semi-brick ie: bootloop or corrupt code. However this is more than a semi-brick. We are talking about successful flashing and still no access to recovery and infinite M logo!
I walked more than one person with this problem through every known procedure to bring these phones back. Even using sbf_flash for linux doesn't work as this is the only way I flash anymore I don't bother with RSD anymore. The thing is it DOES FLASH SUCCESSFULLY just no recovery or boot!

zyxwvut said:
I tried to help someone with this problem before to no avail!
Everyone who is saying just wipe in recovery, or just flash with RSD blah blah blah, need to understand that he CAN NOT access recovery and HE HAS flashed multiple roms using RSD 4.9, read the OP. Im convinced this is physical hardware failure or similar. We all know the drill to recover our precious defy's in the event of semi-brick ie: bootloop or corrupt code. However this is more than a semi-brick. We are talking about successful flashing and still no access to recovery and infinite M logo!
I walked more than one person with this problem through every known procedure to bring these phones back. Even using sbf_flash for linux doesn't work as this is the only way I flash anymore I don't bother with RSD anymore. The thing is it DOES FLASH SUCCESSFULLY just no recovery or boot!
Click to expand...
Click to collapse
OMG Exactly!!!! i have same problem and nobody seems to be able to tell me what to do, they keep saying same thing about trying various SBF's and Vol down + power method. No matter what SBF file I successfully flash with, i cannot get into boot recovery mode.

I have heard before from desperate users that they were able to revive their phone by flashing a full 2.3.4 sbf. This however comes with downsides of not being able to downgrade to froyo by flashing ANY froyo sbf's. There is a way to downgrade back to froyo but its a dirty method. Even after downgrade you can't just flash a sbf, you will always need to restore nandroid and flash fixed sbf

Strange Bricked Defy ?

Hi all,
I have a friend's Defy from a French carrier and my friend is with another carrier so I decide to SIM unlock it by installing CM7 and other files.
So I have root it and install the recovery.
In recovery, I have flash CM7 and Gapps.
But I get a boot loop...
So I decided to flash JORDN_U3_97.21.51 SBF and restart from scratch.
But now, the phone wont boot at all.
Nothing on the screen but it's still reconized by RSD (even if nothing is displayed on the screen) I can re-flash SBF files and RSD say "PASS" but doesn't reboot the phone.
So now I have a brick and can't boot vol up + power doesn't display anything.
Dose anyone have an idea for me ?
Thank you.

1st don't loose your battery - when no working system on the device then it is not being charged
You wrote nothing about wipes - have u performed them? If not try to get into any recovery and wipe user data / factory reset, try vol- w/power or vol + & - together, take a battery for some time before doing it etc.
What ROM u had before flashing CM7?
Is it defy or defy+?
And you flashed CG5 sbf
When you give more details maybe I can propose proper solution.

You wrote nothing about wipes - have u performed them? If not try to get into any recovery and wipe user data / factory reset, try vol- w/power or vol + & - together, take a battery for some time before doing it etc.
Click to expand...
Click to collapse
If I understood right, OP's DEFY is completely bricked and he cannot even access recovery.
Anyway, I unfortunately no solution to propose as I have a DEFY in the same situtation and I'm currently unable to revive it. We aren't the only who had DEFY bricked like this and some managed to have it wake up by flashing certain sbf.
You can try searching "bricked defy" on XDA and see what sbf the topic creator used to save his DEFY, if he succeeded to.

dont flash sbf just after the bootloop..!
-JFK- said:
Hi all,
I have a friend's Defy from a French carrier and my friend is with another carrier so I decide to SIM unlock it by installing CM7 and other files.
So I have root it and install the recovery.
In recovery, I have flash CM7 and Gapps.
But I get a boot loop...
So I decided to flash JORDN_U3_97.21.51 SBF and restart from scratch.
But now, the phone wont boot at all.
Nothing on the screen but it's still reconized by RSD (even if nothing is displayed on the screen) I can re-flash SBF files and RSD say "PASS" but doesn't reboot the phone.
So now I have a brick and can't boot vol up + power doesn't display anything.
Dose anyone have an idea for me ?
Thank you.
Click to expand...
Click to collapse
frend i wanna tell u onething.the very first time i did the flashing of cm7.1stable on froyo 2.2.2defy i got a bootloop..since i was in hostel i cudnt afford internet..so i was soo scared and even waited for 15 min..but the cm7 logo with an arrow swirling around didnt stop..i puld the batery out and again inserted and did something stupid like clearing data and got the condition worse
then i flashed sbf using rsd lite ..again rooted and flashed cm7.1 stable and got bootloop..this time i surfed net and found what shud hav been done ..
1)pull out the battery after the boootloop.
2)clear cache
3)reboot
tats it..the welcome window comes in no time..
so coming to the present issue, after flashing the smf did u get bootanimation with light passing over "android" againg and again ??

Check that u r using the latest RSD.
I have a Defy plus but the same thing happened to me before (black screen even no boot with vol up) so I connected my phone to the computer (I can't really remember if I powered with a vol up or not) but I got it recognized by the RSD. try connecting and powering on the the vol up if nothing just connect and see what will happen.
The most important thing is to use the latest version of RSD.
and please tell me if it worked.
I'm not responsible for anything.

[Help!] Bootloop.

So, I had some issues with my Defy+...
I tested the latest 4.1.2 nightly and seemed like my backup was corrupted (?!) and I had to flash a 2.3.6 BL-6 .SBF since the backup would make me enter a bootloop.
Well, I tried with different .SBFs and sadly all of them have the same effect: the flashing process moves smooth, except that in the moment when I'm asked to power it up it's entering a bootloop.
Now, my battery STILL has some inside, but trying to charge it won't work(gives me the "?" sign). Don't know what should I do. Should I leave the phone in the bootloop until the battery goes away and then to re-flash a .SBF?...
Or my flashing process wasn't good enough and there's a workaround I don't know?... I don't want to brick my phone forever.

Charge battery with mcgyver metod or with other defy & reflash it with 231 sbf. For more info read: http://forum.xda-developers.com/showthread.php?t=966537

So, there's no other option out there?...

Deformat said:
So, there's no other option out there?...
Click to expand...
Click to collapse
Recharge battery with mcgayver metod and reflash sbf, you'll need start from scratch, because your bootmenu was corrupted and you can't restore nandroid or reinstall zip

Deformat said:
So, I had some issues with my Defy+...
I tested the latest 4.1.2 nightly and seemed like my backup was corrupted (?!) and I had to flash a 2.3.6 BL-6 .SBF since the backup would make me enter a bootloop.
Well, I tried with different .SBFs and sadly all of them have the same effect: the flashing process moves smooth, except that in the moment when I'm asked to power it up it's entering a bootloop.
Now, my battery STILL has some inside, but trying to charge it won't work(gives me the "?" sign). Don't know what should I do. Should I leave the phone in the bootloop until the battery goes away and then to re-flash a .SBF?...
Or my flashing process wasn't good enough and there's a workaround I don't know?... I don't want to brick my phone forever.
Click to expand...
Click to collapse
Once you have flashed the sbf and back on stock you need to go into the moto recovery and do a restore to default / format system. that should get around the boot loop issue... at least it did for me...

Can't acsess anything
locn said:
Once you have flashed the sbf and back on stock you need to go into the moto recovery and do a restore to default / format system. that should get around the boot loop issue... at least it did for me...
Click to expand...
Click to collapse
Hi together, well I hope this is the right place.... I'm owner of a motorola Defy MB 525 that ran without any problems on cm9 nightly for last 6 month. Now suddenly it doesn't start any moer andIi can't access recovery setup nor anything else so it's impossible to wipe anything, too. When connected to my notebook only the white LED is shining but nothing happens. The typical "hardware-found-ping" appears and several seconds later the " hardware was removed ping." The right drivers are installed on my notebook, but even RSD Lite doesn't found my Defy so I can't flash enything. Anyone has any Idea what to to?
Thank's in advance for any help!
Heddi

Heddi72 said:
Hi together, well I hope this is the right place.... I'm owner of a motorola Defy MB 525 that ran without any problems on cm9 nightly for last 6 month. Now suddenly it doesn't start any moer andIi can't access recovery setup nor anything else so it's impossible to wipe anything, too. When connected to my notebook only the white LED is shining but nothing happens. The typical "hardware-found-ping" appears and several seconds later the " hardware was removed ping." The right drivers are installed on my notebook, but even RSD Lite doesn't found my Defy so I can't flash enything. Anyone has any Idea what to to?
Thank's in advance for any help!
Heddi
Click to expand...
Click to collapse
Do you connect it to RSD in bootloader mode? Volume + when powering on. What is on the screen then?
Deformat said:
So, I had some issues with my Defy+...
I tested the latest 4.1.2 nightly and seemed like my backup was corrupted (?!) and I had to flash a 2.3.6 BL-6 .SBF since the backup would make me enter a bootloop.
Well, I tried with different .SBFs and sadly all of them have the same effect: the flashing process moves smooth, except that in the moment when I'm asked to power it up it's entering a bootloop.
Now, my battery STILL has some inside, but trying to charge it won't work(gives me the "?" sign). Don't know what should I do. Should I leave the phone in the bootloop until the battery goes away and then to re-flash a .SBF?...
Or my flashing process wasn't good enough and there's a workaround I don't know?... I don't want to brick my phone forever.
Click to expand...
Click to collapse
If you haven't flashed yet try to keep with BL6 sbfs, and not BL7 like 231.
After battery charge try to get to stock recover (volume down when powering on) and wipe data/factory reset before flashing.

bootloader
corrinti said:
Do you connect it to RSD in bootloader mode? Volume + when powering on. What is on the screen then?
If you haven't flashed yet try to keep with BL6 sbfs, and not BL7 like 231.
After battery charge try to get to stock recover (volume down when powering on) and wipe data/factory reset before flashing.
Click to expand...
Click to collapse
Hi, I can't enter bootloader mode, nor anything else. The screen stays dark and the phone doesn'treact. Only mi notebook pings when i press the startbutton one phone. Once for Hardware detected and seconds later for hardware removed. from time to time the notebook tries to find drivers, but couldn't and abort searching.
Chris

Heddi72 said:
Hi, I can't enter bootloader mode, nor anything else. The screen stays dark and the phone doesn'treact. Only mi notebook pings when i press the startbutton one phone. Once for Hardware detected and seconds later for hardware removed. from time to time the notebook tries to find drivers, but couldn't and abort searching.
Chris
Click to expand...
Click to collapse
And your battery? Is it charged?

[Q] Defy Plus No Recovery

Hi,
I have had my motorola Defy Plus running cyanogen for a year or so. Various versions, 2nd init.
Recently I decided to upgrade to Cyanogen version http://forum.xda-developers.com/showthread.php?t=2515036
Got it installed and running ok but there were some glitches (maybe) so I started from scratch to be sure.
The method I used to completely re-initialise the phone is as follows.
repartitioned SD, wiped and flashed
DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8RTGB005.0R_PDS03C_USAJRDNGIBRRTGB_P023_A025_M002_Service1FF.sbf.gz
booted into stock android. installed framaroot - rooted.
installed 2nd init
installed twrp
updated recovery
wipe/reset
install cyanogen
The first time I did this it worked (but with some gapps glitches so to trouble shoot I thought I would start again.
Now this is the problem.
the second time when I tried to flash the stock rom RSD lite hung with "please manually reboot the phone"
After this it is impossible to get into stock recovery from the android triangle screen. When pressing both volume buttons the only thing that happens is the screen brightness toggles between light and dim.
I can get the phone to connect to RSD lite and I can flash ROMS - I have tried a few but I cannot get recovery, Always after flashing RSD says please manually reboot phone. The automatic reboot does nothing but get to the motorola or triangle screen, or a black screen sometimes.
Just to clarify - I have googled and tried many solutions, the main problem is that there is no stock recovery from the triangle screen so no solution that relies on this is working,
Any help appreciated. Thanks.

Stock recovery is included in the ... stock ROM (duh) so you need to install completely the stock ROM. But anyway at what serve stock recovery for you?

pgreed said:
Stock recovery is included in the ... stock ROM (duh) so you need to install completely the stock ROM. But anyway at what serve stock recovery for you?
Click to expand...
Click to collapse
The one that usually works is DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8RTGB005.0R_PDS03C_US AJRDNGIBRRTGB_P023_A025_M002_Service1FF.sbf.gz
Which is the retail UK version for my phone. However when I try to flash it now with RSD it gets to the reboot stage but I am not sure it completes.

deMangler said:
The one that usually works is DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8RTGB005.0R_PDS03C_US AJRDNGIBRRTGB_P023_A025_M002_Service1FF.sbf.gz
Which is the retail UK version for my phone. However when I try to flash it now with RSD it gets to the reboot stage but I am not sure it completes.
Click to expand...
Click to collapse
I think what would solve my problem would be a way of installing the above rom (which I believe includes the bootloader). I need to solve the problem of the flashing not progressing beyond the reboot stage.
I am using RSD Lite version 6.1.4
Any help appreciated. Thanks.

Boot in recovery. Do a total wipe (factory reset). Reboot in bootloader. Flash the .sbf.

pgreed said:
Boot in recovery. Do a total wipe (factory reset). Reboot in bootloader. Flash the .sbf.
Click to expand...
Click to collapse
There is no functioning recovery, so it is impossible to do a wipe. It is possible to flash a stock ROM (which should restore the recovery) using RSD lite but the process does not get past the reboot stage.

download again the sbf or flash another sbf.

pgreed said:
download again the sbf or flash another sbf.
Click to expand...
Click to collapse
Thanks - good advice I have been trying that. Meanwhile I will be looking out for other ways of solving the problem. I will let this thread know if anything works.
Thanks everyone.

deMangler said:
Thanks - good advice I have been trying that. Meanwhile I will be looking out for other ways of solving the problem. I will let this thread know if anything works.
Thanks everyone.
Click to expand...
Click to collapse
I am not supposed to be cynic. That was happened to me a few times and eventually I can managed to make a complete flash. Try again.

pgreed said:
I am not supposed to be cynic. That was happened to me a few times and eventually I can managed to make a complete flash. Try again.
Click to expand...
Click to collapse
Thanks - I will let you know if it works.

deMangler said:
Thanks - I will let you know if it works.
Click to expand...
Click to collapse
I had the same problem and solved.After flash with RSD lite it stusk on Moto logo and pulsing,pullsing...,So disconenct from cable and remove baterry.Then conect baterry and turn on fone with Volume + and power at the same time to go into recovery.Yes it show a warning in triangle and I thing IM FU**ED it have no recovery.But just pushing the butons wtih angry(not remember the order) and it come in stock recovery.Then wipe everything that can wiped and reboot.It works and phone go to work.

same here - but your report helped!
I had the same problem and did what you did... boot with vol+down and power and got to the triangle. then press UP+DOWN fast after another. what follows is the recovery!
propov said:
I had the same problem and solved.After flash with RSD lite it stusk on Moto logo and pulsing,pullsing...,So disconenct from cable and remove baterry.Then conect baterry and turn on fone with Volume + and power at the same time to go into recovery.Yes it show a warning in triangle and I thing IM FU**ED it have no recovery.But just pushing the butons wtih angry(not remember the order) and it come in stock recovery.Then wipe everything that can wiped and reboot.It works and phone go to work.
Click to expand...
Click to collapse

[Urgent help] I really need a Dev. Seriously.

Hello guys! This is my first post so please don't hate me.
I have an old Defy which I need to use because my current smartphone is broken. But I have some problems:
My Defy is a MB525 but months ago I've flashed an MB526 (Defy +) SBF and since then my Defy became a Defy+. The problem is: It's stucked on bootloop (M of death) and I CAN'T GET TO STOCK RECOVERY.
I try everything:
- Flashed all Defy MB525 SBFs = white led (of death) and screen off
- Flashed a lot of Defy + SBFs = only one "worked". It's the DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF this rom is the only one who makes my phone boot.. into a bootloop without stock recovery.
I don't have problems to recognize the phone on RSD Lite, my drivers are up to date and my battery is 100% (universal charger for hours). I try to revive this phone almost everyday. I'm using a Defy MB525 (used to be a Claro Brazil rom) with a MB526 rom and BL 7. I remember that one day I was able to flash a chinese rom and the system used to boot, but I couldn't get more than five minutes of use, the system crashed and rebooted. Don't know if this is important but anyway.
I just need to get to the stock recovery. I'm beggin you guys to help me because I really don't know what else to do.
Thanks very much for your understanding I'll be very glad if someone help me out.
Best regards.
PS: I really need your help DEVs, I'm not a noob but this is beyond my comprehension :crying:

Have you tried going to stock recovery after flashing DFP-231? It's not possible that the stock recovery is missing. Switch off the Defy, hold the power and volume down buttons simultaneously till a triangle with a ! mark appears. Then press both volume up and volume down simultaneously to get stock recovery. Then wipe data and cache and try again. If it still doesn't work, it looks like a hardware problem.

hotdog125 said:
Have you tried going to stock recovery after flashing DFP-231? It's not possible that the stock recovery is missing. Switch off the Defy, hold the power and volume down buttons simultaneously till a triangle with a ! mark appears. Then press both volume up and volume down simultaneously to get stock recovery. Then wipe data and cache and try again. If it still doesn't work, it looks like a hardware problem.
Click to expand...
Click to collapse
0. read beginners guide
1. charge battery (ext. charger)
2. factory reset from stock recovery if possible
2a. if not flash dfp-231.sbf (may end in bootloop)
2b. wipe data in stock recovery (should work now)
3. reboot
now you can root , install recovery
Sent from my MB525 red , froyo 2.2.2 german blurless service.sbf, as stock rom

Same thing, but more descriptive.?
Sent from my Nexus 7 using Tapatalk

Guys I REALLY cannot go to the stock. Seriously I don't know why. I know how it works and it really seems like missing! I'm doing everything right!! It's a dead end :crying::crying::crying::crying:
Is there any way to flash only the recovery apart from a full SBF? I read about ADB also. If I could make ADB see my device when it's in bootload I could try some commands, right? But I think ADB just works when the phone is alread booted.
Thanks again for your help DEVs!

sorry for double post
Hey guys I figurated something! My defy only boots (into the bootloop) to this four Defy + SBFs. They are all BL 7 I think.
4.5.1-134_DFP-188
4.5.1-134_DFP-231
4.5.1-134_DFP-2311
4.5.1-134_DFP-2312
Any other SBF (MB525 or MB526) get me to the black screen and white led.
Don't know if this helps but anyway.. Still not able to go to the recovery.

Those SBFs are BL7s. Anyways, if you're not able to enter stock recovery then most probably you're doing something wrong. Watch some videos on YouTube on how to enter stock recovery. It is simply impossible for the stock recovery to be "missing". I may be able to help you on hangouts though.
Sent from my Nexus 7 using Tapatalk

bro,
have you faced any defects in volume controll previously.
It may be due to faulty volume switch, which essentialy need to enter recovery.
Sent from my MB526 using Tapatalk 2

hotdog125 said:
Those SBFs are BL7s. Anyways, if you're not able to enter stock recovery then most probably you're doing something wrong. Watch some videos on YouTube on how to enter stock recovery. It is simply impossible for the stock recovery to be "missing". I may be able to help you on hangouts though.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Hotdog I really appreciate your concern but I'm doing it right, seriously. I know that when you boot to the recovery a green android with an exclamation point appears, and then you press vol up + vol down BUT I CAN'T GET THERE. THERE IS NO ROBOT. NO LIVE. NO HOPE :crying:
Sorry I'm a sentimental mood I love this phone so much. I'll try to record the defy boot with my lazy webcam later
pradeeppk said:
bro,
have you faced any defects in volume controll previously.
It may be due to faulty volume switch, which essentialy need to enter recovery.
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
Hey bro! The vol buttons are working because sunday I flashed a "fixed sbf" based on my DFP-231 SBF and try to go to the stock recovery but instead it lead me to a bootloader failure. It means that the command was sent, but the system was corrupted.
I was thinking about "mixing" a NANDROID with this SBF and flash it via RSD LITE, is it really possible? I was able to mix SBFs before, it changed the M logo but lead me to the same "bootloader error"..

If bootloader is ok.....
Sound's like hardware problem...
Have you error output in RSD during flash process ?
Sent from my MB525 red , froyo 2.2.2 german blurless service.sbf, as stock rom

Lame webcam record
Hey guys!! I made that video showing that I have no recovery. I know, there is no quality in this video because its an old (very old) webcam. Anyway the first time I try to go to recovery and the second I enter on the bootloader to show that the buttons are ok
https://www.youtube.com/watch?v=q-vovcdpQ0s

That URL is for some other video?. Anyway, I found the video in question. It looks as if volume down isn't working, so I guess the fault is with the volume button. Most probably the bootloop will be fixed by a data wipe in stock recovery.

hotdog125 said:
That URL is for some other video?. Anyway, I found the video in question. It looks as if volume down isn't working, so I guess the fault is with the volume button. Most probably the bootloop will be fixed by a data wipe in stock recovery.
Click to expand...
Click to collapse
Sorry I fixed the video right now. The button is working, I make sure of that. **** it, guess this fancy brick with a M letter is all I got.
Anyway thanks for your support guys. I've discovered something in my unbrick mission: I learned that Linux is a great operating system, better then windows, and will probably be my primary OS from now on.