Hi I installed the root for my s 4 i9505 but i used the i9500 and now it is stuck on the kies thing. I was wondering if there was anything i could do and also if someone has the pit partition for the h3g stock rom i could try that way. Any help is appreciated.
Try to flash back your stock Rom with odin, should be fine.
metzo32 said:
Try to flash back your stock Rom with odin, should be fine.
Click to expand...
Click to collapse
i have tried that but it keeps on saying there is no pit partition. Do you know where i could get the pit file?
you don't need to get complicated. just download an official firmware that is Odin compatible, and then install in odin (open is as PDA).
before that, shut down the phone (keep power pressed). restart in download mode (volume down, menu then power), with cable plugged out. you will go to the download screen. connect the cable, start odin... and there you are... (at least this is what I did with mine when I got stacked to the kies screen)
okty2k said:
you don't need to get complicated. just download an official firmware that is Odin compatible, and then install in odin (open is as PDA).
before that, shut down the phone (keep power pressed). restart in download mode (volume down, menu then power), with cable plugged out. you will go to the download screen. connect the cable, start odin... and there you are... (at least this is what I did with mine when I got stacked to the kies screen)
Click to expand...
Click to collapse
I will try that again and get back to you. I am downloading an official firmware now and will try that.
worker99 said:
I will try that again and get back to you. I am downloading an official firmware now and will try that.
Click to expand...
Click to collapse
good luck!
and maybe, if that does not work, an forced update via kies might still do the job....
okty2k said:
good luck!
and maybe, if that does not work, an forced update via kies might still do the job....
Click to expand...
Click to collapse
How do i do a forced update via kies? Kies does not recognise my phone when i have it connected. Should i try connecting the usb to the back of the computer rather than the front?
Try Flashing another Kernel
sadekmefti said:
Try Flashing another Kernel
Click to expand...
Click to collapse
What if i was to flash the stock rom via odin but also have re partition checked? What will that do?
worker99 said:
What if i was to flash the stock rom via odin but also have re partition checked? What will that do?
Click to expand...
Click to collapse
I don't know exactly what that would do.
You cannot flash another kernel, as there is none yet.
You need to be in download mode for kies to recognize (volume down, home, power). It should work to do Emergency firmware recovery in Tools.
Anyway, I am quite sure that running from Odin works. Have you tried to follow the steps I mentioned?
okty2k said:
I don't know exactly what that would do.
You cannot flash another kernel, as there is none yet.
You need to be in download mode for kies to recognize (volume down, home, power). It should work to do Emergency firmware recovery in Tools.
Anyway, I am quite sure that running from Odin works. Have you tried to follow the steps I mentioned?
Click to expand...
Click to collapse
No still at work finish in 20 mins. I have tried all that yesterday but Odin still kept on saying no partition thing and kies I did the emergency firmware recovery but it did not connect to the phone. I will try again but this time connect the usb to the back of the computer.
Do not flash with re-partition only in an EXTREME case !
sadekmefti said:
Do not flash with re-partition only in an EXTREME case !
Click to expand...
Click to collapse
what will it do if i do? as i am getting frustrated as then the phone will be a £600 paperweight
Repartition is supposedly going to wipe all data on your phone, but it's also a death button that makes you ODIN freeze and making your phone not boot up so proceed with extreme caution
It uses the .pit file to repartition the space the pit file holds how much to allocate to /system, /data. If you leave it blank and flash, it'll drop the files your flashing into the existing 'slots'. If you select the pit file and repartition, it'll reallocate.
Only select that if the instructions for your rom require you to do it.
Thanks it works. I put the usb lead at the back of my pc and installed the stock rom thanks for your help guys
worker99 said:
Thanks it works. I put the usb lead at the back of my pc and installed the stock rom thanks for your help guys
Click to expand...
Click to collapse
You are welcome!
Related
ok guys, i have unbricked my vibrant before after the OTA update about 5 weeks ago. i am pretty new at this smart phone stuff, but was pleasantly surprised i was able to get odin to fix the brick. about an hour ago i launched the stupid VooDoo in the OCLF app and the phone now will go as far as the animated galaxy "S", then go blank. i attempted the Odin flash about 5 times now with the same result each time, just boots up past the vibrant screen to galaxy S then goes blank. when the phone restarts or reboots after the odin flash a message in red reads DATA WIPE FAILED between a few yellow text lines. when i try to reinstall packages through boot screen i get the same message i got after the OTA brick, E:Can't open /sdcard/update.zip now the phone was rooted with the OCLF before i launched VooDoo. can somebody help me out?!?
Odin back to stock. That should fix it.
http://forum.xda-developers.com/showthread.php?t=734475
jnutz said:
Odin back to stock. That should fix it.
http://forum.xda-developers.com/showthread.php?t=734475
Click to expand...
Click to collapse
I second this comment. Flashing back to stock shall help. I've soft brick my phone and unbricked it recently.
Sent from my SGH-T959 using XDA APP
www.goteamfriday.com
Anybody else have an suggestions?? like i said in OP i have tried to flash back to stock, about 5-6 times now, all with the same result. phone goes blank after galaxy S screen and music. thanks
As mentioned in a million threads, you need to flash Eugene's "froyo that doesn't brick." Then flash whatever firmware you want.
flashed the froyo successfully from eugene. cool set up, major issue though, i have no application storage now. there are a ton of apps in manage apps and i cannot uninstall any of them. can i fix this somehow??
i'm going to try flashing froyo back in it so it works, not select repartition. then restart odin, select repartition and flash the old vj12 rar and see if that works
Never seemed to get the answer to this. What is the purpose of "Eugene's froyo that doesn't brick?"
Why do some people suggest flashing that, before they odin?
Did eugene take everything down from xda, I can't even find that anymore.
i actually found what i though was the froyo that doesn't brick but it was actually his jk2 version. i clicked Eugene's link on one of his posts and it took me to his site and thats were i got it. i did some searching and actually found the "froyo that doesn't brick", it fixed my baby! i couldn't do anything once flashed but i was then able to flash back to jdf then j16 and all is well. i have flashed like 10 roms into her since this weekend with success, i am back to running j16 with some extras as the games i play don't support 2.2
I'm trying to use Odin but my pc (win xp) is not recognizing my phone. Should i try another pc with vista or win7?
Did you install the drivers
Sent from my SGH-T959 using XDA App
spyda23 said:
I'm trying to use Odin but my pc (win xp) is not recognizing my phone. Should i try another pc with vista or win7?
Click to expand...
Click to collapse
+1 for the drivers.
spyda23 said:
I'm trying to use Odin but my pc (win xp) is not recognizing my phone. Should i try another pc with vista or win7?
Click to expand...
Click to collapse
Check your driver and be sure you phone is in download mode.
jackhuny said:
Check your driver and be sure you phone is in download mode.
Click to expand...
Click to collapse
When i'm in download mode, it doesn't recognize it. When i'm in recovery mode, Odin recognizes it. If i turn my phone on and plug it in, my pc recognizes it, drivers are ok.
Any answers, i could really use the help
what version of Odin are you running? not that it should matter. try pulling the batt, hold volume up and down, insert batt while volume buttons are pressed then plug in USB and wait for it to go into download mode then release buttons. see if Odin recognizes it then.
try a different cable too if above doesn't work
Turn your phone off open odin hold down volume up and down,now plug in the usb this will get you into dl mode now you need to flash Froyo ~~~That does not Brick! rom with odin. Right after you flash that get back into download mode open odin first then with the phone ( power the phone off give it a min, hold down the volume up and down keys, now insert the usb cord BAM download mode) flash back to whatever rom you want.
Hey I'm not so tech sabby could you help wit steps to do the same cuz kind of have same prob. With voodoo
Technowiz said:
Hey I'm not so tech sabby could you help wit steps to do the same cuz kind of have same prob. With voodoo
Click to expand...
Click to collapse
Or you could do the same steps I have already given and it will work, you do know how to use odin right?
Sent from my SGH-T959 using XDA App
Im sure you all have heard this one before. But I think mine may be alittle different. Im getting the error, System software not authorized etc. I bought it off of someone. I have odin 3.07 and it doesnt show the COM ports. I got USB drivers for samsung cellphones. I also got the stock ROM downloaded. I guess the question is, is there a way to flash this back to stock from the SD Card? I noticed this. I unplug the USB cable. The phone turns off. It does not come on unless the USB cable is hooked up. So I dont know if this means anything different. This phone has never been hooked up to this computer. It shows a Unknown Device in my device manager. Its hardware ID tag is USB\UNKNOWN. It is showing the SECURE FAIL: KERNAL. Can someone point me in the corrrect direction. Any help would be greatly appreciated.
VaRMiT said:
Im sure you all have heard this one before. But I think mine may be alittle different. Im getting the error, System software not authorized etc. I bought it off of someone. I have odin 3.07 and it doesnt show the COM ports. I got USB drivers for samsung cellphones. I also got the stock ROM downloaded. I guess the question is, is there a way to flash this back to stock from the SD Card? I noticed this. I unplug the USB cable. The phone turns off. It does not come on unless the USB cable is hooked up. So I dont know if this means anything different. This phone has never been hooked up to this computer. It shows a Unknown Device in my device manager. Its hardware ID tag is USB\UNKNOWN. It is showing the SECURE FAIL: KERNAL. Can someone point me in the corrrect direction. Any help would be greatly appreciated.
Click to expand...
Click to collapse
I'm guessing you when you bought it the phone booted is this correct?
If yes, what firmware is on it?
What have you done that no longer allows the phone the boot (did you flash something with Odin)?
The more info the better....
rayburne said:
I'm guessing you when you bought it the phone booted is this correct?
If yes, what firmware is on it?
What have you done that no longer allows the phone the boot (did you flash something with Odin)?
The more info the better....
Click to expand...
Click to collapse
Ive done nothing. I can get it to the POWER, VOL DOWN, HOME BUTTON and it shows the droid Downloading .....
I have no clue what firmware is on it.
VaRMiT said:
Ive done nothing. I can get it to the POWER, VOL DOWN, HOME BUTTON and it shows the droid Downloading .....
I have no clue what firmware is on it.
Click to expand...
Click to collapse
So you bought the phone and it has never booted for you?
If you have MF3 bootloader on there and someone tried to install a custom recovery it could be soft bricked.
Not sure what to suggest if you don't know what occurred to cause the phone to only go into download mode?
You could take it to best buy with a samsung experience center and have them reflash it?
The only problem with this is if you don't have MF3 bootloader, best buy will flash it and upgrade it.....
Try to Odin MDL on it first
Sent from my SGH-I337 using Tapatalk
rushi.1986 said:
Try to Odin MDL on it first
Sent from my SGH-I337 using Tapatalk
Click to expand...
Click to collapse
When you mean MDL. thats the stock rom correct? I do have that. When I look at Odin, it doesnt show anything on the COM part at the top left. Like its hooked up to a com port.
What I meant by the Downloading ...... (with the driod logo guy) Im saying I can get it to do that. Im at the point where I cant get the S4 to be reconized by ODIN. I have the stock rom, odin 3.07 files. I have tried to install the samsung usb drivers....
Still no reply on how to fix this? I have no clue on what to do here. I dont know what firmware etc is on it. I bought it this way. I just want to flash it back to factory, its the att version. It only stays on when the usb is hooked up. I can get it to go into download mode. But on the computer, it doesnt show a usb device being found. I can start odin up, but nothing appears on the COM to show what com port is available. Is there anything I can do here off of a SDCard? I also need to mention that I can not hold down vol up and power and home button to get it to go into recovery mode. It flashes it fast and goes to the yellow triangle.
Anyone please.....
You need to get Odin to recognize it. Try different usb cables. Use the usb ports on the back of the computer. Try a different computer. Without knowing the firmware you're on odin may not work, but it should still recognize your device. If you're on mdl firmware Odin will work. If you're on mf3 then you're sol.
Have you tried to get into the recovery and not just the download mode?
Volume up + Home + Power - If you can get into a recovery try to do a factory reset.
If you cant get into the recovery than you'll need Odin. Sometimes (rarely) kies well affect Odin. If you have kies uninstall it and than run odin.
- Open Odin without your phone connected.
- Power on your device, go into download (Odin) mode. Volume down + home + power.
- Now plug device into your computer.
- Odin should read it, unless its MF3 firmwire.
If your phone is MF3, you may need a Samsung bestbuy rep to reflash the mf3 firmwire.
Sent from my SGH-I337 using XDA Premium 4 mobile app
Br4nd3n said:
Have you tried to get into the recovery and not just the download mode?
Volume up + Home + Power - If you can get into a recovery try to do a factory reset.
If you cant get into the recovery than you'll need Odin. Sometimes (rarely) kies well affect Odin. If you have kies uninstall it and than run odin.
- Open Odin without your phone connected.
- Power on your device, go into download (Odin) mode. Volume down + home + power.
- Now plug device into your computer.
- Odin should read it, unless its MF3 firmwire.
If your phone is MF3, you may need a Samsung bestbuy rep to reflash the mf3 firmwire.
Sent from my SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have tried the power, vol up and home. It flashes the recovery, then goes back to the triangle. Odin, doesnt show a COM port that the phone is connected when i have it in download mode.
Also....i do appreciate you all for helping me figure this out.
I have recently purchased a new PC, installed all drivers and now can't flash anything (custom recovery or official firmware)
Any ideas what has gone wrong?
I will attach 2 pictures. 1 showing the first error (no pit partition) and the 2nd with the pit still not working.
Please help
Is your phone in DOWNLOAD MODE? What version of ODIN u used?
Joku1981 said:
Is your phone in DOWNLOAD MODE? What version of ODIN u used?
Click to expand...
Click to collapse
Yes I'm in download mode. Using Odin 3.09.
CyberTbag said:
Yes I'm in download mode. Using Odin 3.09.
Click to expand...
Click to collapse
try a different cable/port
Repulsa said:
try a different cable/port
Click to expand...
Click to collapse
Only have 1 cable and I've tried all the USB ports
I had the error in your 1st pic, and like Repulsa says....the unused cable from my tab3 made it work.
Is there any connecting/disconnecting beeps grom pc if you move the cable up and down a touch?.
theunderling said:
I had the error in your 1st pic, and like Repulsa says....the unused cable from my tab3 made it work.
Click to expand...
Click to collapse
Guess I'm gonna have to find a new cable :/
Oh well, cheers anyway
CyberTbag said:
Only have 1 cable and I've tried all the USB ports
Click to expand...
Click to collapse
After checking your screenshot , why do you flash the kitkat 4.4.2 with a pitfile on it?and untick Repartion.. Flash only the FNB8.Home.tar mate . I encounter this issue once and the fix was changing the Port
Repulsa said:
After checking your screenshot , why do you flash the kitkat 4.4.2 with a pitfile on it?and untick Repartion.. Flash only the FNB8.Home.tar mate . I encounter this issue once and the fix was changing the Port
Click to expand...
Click to collapse
Just had the same "no pit partition" error
Are entering recovery from total shutdown and pressing buttons or using the restart to download mode?
I had similar problem and turns out odin flashing don't work when you use restart to download mode.
New Folder said:
Are entering recovery from total shutdown and pressing buttons or using the restart to download mode?
I had similar problem and turns out odin flashing don't work when you use restart to download mode.
Click to expand...
Click to collapse
I don't have an option to restart to download mode. I'm using stock firmware.
I can confirm today that it was indeed my USB cable. I have borrowed my friends cable and it works just fine.
Cheers for all the help guys
My connection with the pc just got lost in the middle of a firmware update. Now i'm stuck in some special recovery mode ( the phone is asking to recover with samsung kies) but kies never get a connection with the phone. I tryed to install the firmware with Odin, everything goes just fine till the hidden image where the Odin gives me fail.
I cannot go to download mode or normal recovery mode.
Pls help!!!!
..
calinormy said:
My connection with the pc just got lost in the middle of a firmware update. Now i'm stuck in some special recovery mode ( the phone is asking to recover with samsung kies) but kies never get a connection with the phone. I tryed to install the firmware with Odin, everything goes just fine till the hidden image where the Odin gives me fail.
I cannot go to download mode or normal recovery mode.
Pls help!!!!
Click to expand...
Click to collapse
Did you terminate Kies in windows task manager? Kies can cause Odin to fail!
Ups. No. I will try this right now
fffft said:
You should do firmware writes with a notebook or UPS, a power interruption while writing critical system files can cause all kinds of damage.
Unfortunately you didn't provide much detail for us to work with. Not even a screenshot or photograph of what you see on the screen of your phone now or the log from Odin or Kies. Even your thread title didn't convey any useful information.
Pull your phone battery. Then try to enter download mode by pressing and holding the volume down key, then the home key, then the power key. Then try to flash a full, stock firmware image and proper PIT file concurrently. If you run into any difficulties, give a detailed description of what you tried, the Odin log and a photo of the phone screen.
More than likely it's recoverable. Despite the lack of details in your post, your stumbling block is probably that you aren't using a PIT file to correct (likely) partition damage that occurred during your power interruption.
.
Click to expand...
Click to collapse
I resolved my problem. I just flashed the pit file only with repartition checked in Odin and after that my phone just came alive. No need to flash full firmware. Thanks for help to you and everyone!
Hey all, new Android user here. I just rooted my device with no problems, but it dies and I recharge it, but it just goes to the "samsung" screen, and will vibrate 3 times quickly followed by another about 1/2-1 second later, then repeat every ~15-20 seconds. I am able to run it in ODIN (download) mode. I was told I need a new rom/firmware, can someone show me how to do this without ruining my device? I didn't save a backup because I assumed I would have no problems
I have had 0 problems before this, and even after root I didn't experience a problem.
Model: SM_G530T
FYI I am a mac user so have downloads be .dmg's.
Thanks in advance! If you need more info, tell me!
bump
pls help I want my phone back
You'll find your stock firmware on samsung-firmware.org
It'll be tar.md5 format, perfectly normal.
Add it into the AP/PDA in Odin and it'll flash fine.
u0aol said:
You'll find your stock firmware on samsung-firmware.org
It'll be tar.md5 format, perfectly normal.
Add it into the AP/PDA in Odin and it'll flash fine.
Click to expand...
Click to collapse
teach me how to upload to odin pls
Make sure all your drivers are installed, turn your phone off, plug the USB into the computer.
Start Odin (right click, properties, run as administrator and in xp compatability mode)
Put your phone into download ode (VOLUME UP, HOME, POWER)
Plug your phone into the computer. Odin will say "added" in it'd output box.
Press the button PDA or AP (depends on version) then select the firmware you just downloaded (tar or md5).
Once loaded into Odin, press start, it'll flash everything and then restart your phone.
Let me know if you need any more help!!
Edit:
Please ensure you are flashing the correct ROM for your phone. Bad firmware or recovery images can cause some bad problems.
u0aol said:
Make sure all your drivers are installed, turn your phone off, plug the USB into the computer.
Start Odin (right click, properties, run as administrator and in xp compatability mode)
Put your phone into download ode (VOLUME UP, HOME, POWER)
Plug your phone into the computer. Odin will say "added" in it'd output box.
Press the button PDA or AP (depends on version) then select the firmware you just downloaded (tar or md5).
Once loaded into Odin, press start, it'll flash everything and then restart your phone.
Let me know if you need any more help!!
Edit:
Please ensure you are flashing the correct ROM for your phone. Bad firmware or recovery images can cause some bad problems.
Click to expand...
Click to collapse
Is there a version of http://developer.samsung.com/technical-doc/view.do?v=T000000117 for mac? Could you give links to everything that I need to download? (I got this https://samsung-firmware.org/downlo...Mobile)/400h/TMB/G530TUVU1AOF8/G530TTMB1AOF8/) Also remember that my phone can't turn on, gets stuck at the T-Mobile part.
acheccone19 said:
Is there a version of http://developer.samsung.com/technical-doc/view.do?v=T000000117 for mac? Could you give links to everything that I need to download? (I got this https://samsung-firmware.org/downlo...obile)/400h/TMB/G530TUVU1AOF8/G530TTMB1AOF8/) Also remember that my phone can't turn on, gets stuck at the T-Mobile part.
Click to expand...
Click to collapse
Not that I'm aware of, but Google is your friend, friend.
Home + Volume Down + Power, that starts your phone in download mode which Odin uses to push software.
Your phone needs to be in download mode to do anything at all with Odin.
Also, why not just spin up a virtual machine and use the windows Odin, Windows is much better for all of this sort of stuff.