Database Users

help bootloop!!!

after three weeks everything ok,to day not start remains in bootloop.i have flashed the original firmware with odin LA3.ATO but is the same!!!.the firmware was the original with root and CWM.please help me!!!!

rimoragl said:
after three weeks everything ok,to day not start remains in bootloop.i have flashed the original firmware with odin LA3.ATO but is the same!!!.the firmware was the original with root and CWM.please help me!!!!
Click to expand...
Click to collapse
This thread is gonna get moved to Q&A, but, before it does...
First, try to boot into recovery and wipe cache and dalvik cache. If that doesn't work, you're probably going to need to flash a stock firmware via Mobile ODIN or the PC version of ODIN.
See the stickied thread with official firmwares in this section, then search XDA for how to flash via ODIN (I highly recommend Mobile ODIN). That should do the trick.
Steve

i have make all wipe but not change.i have flashed with odin 1.85 the stock firmware but is the same!

tell us a bit more detail how u flash and what u flash via odin

i have flashed the firmware P6800XXLA3 CSC ATO.with odin 1.85.but remainig in bootloop

Assuming that your download mode is fine
Can you enter recovery mode? What recovery. Stock or CWM?
If yes.. Your cache and dalvik need to be clean up..
When flashing with odin, Dont check repartition or use pit files, you dont need it except you know what to do..

I advise you to flash your machine with the following firmware ..... (see photo)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

thanks,but when i try to download the firmware the link dont work:bad gateway.there is another link.

i have the link and i have flashed the P6800ZSLA2 EGY with odin 1.85 but is the same remaining in bootloop.after i have make the full wipe.

please i am very preoccupied,the problem is in the boot.

Thread Moved To General​
This is a development section, its not for questions. Please post in the correct section, and refer to the read before posting sticky for guidelines​

Install cwm recovery and download custom ROM from this thread http://forum.xda-developers.com/showthread.php?t=1520888
Move your zip file to sdcard / external sd card, and install from recovery,.. Tell me what happen after you done..

I did but not change!!!I 'never happened!this is not a BRICK.What you can 'do?
thanks

Have you done the Samsung stock recovery 3e data wipe/factory reset
And then reflash your stock firmware.
CWM data wipe or format is not good enough.
you might have to remove external sd card if 3e recovery goes to 'manual mode'.

i did exactly,but is the always the same:bootloop!!!is possible there is a virus?is possible to flash a firmware with Odin,with Bootloader and Pit?

excusme but i dont undestended the 3e recovery how i install.

my rooted GT7.7 with CWM also experience similar problem.
It stuck in the "Samsung Galaxy Tab 7.7" screen for around 5 mins and go into animation then growing "SAMSUNG" logo for another 5 mins.
Then finally it boot up normally. 8'(

[Q] how to update rooted S4 I9500 to official KITKAT

Please can anyone help me with my phone. I want to update my S4 I9500 rooted to Official rom kitkat and root again!! I dont want to brick my phone coz its very typical thing nowadays coz I dont understand. Can anyone tell me step by step it will be appreciated.
*#1234# details:
AP: I9500XXUEMJ8
CP: I9500XXUEMJ8
CSC: I9500OJVEMJ8

More detail about my phone help me please

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Go to www.sammobile.com/firmware
And signup
Then search for your device "gt-i9500"
Download any firmware that you want
Download odin (search google)
And go download mode
Connect you phone to pc
Then extract the firmware.zip and open odin
If you see a blue icon upper left,, you can continue
Then select AP and search for the extracted firmware.tar.md5
And hit start
Then wait until the process done

but sir which one I download ??

annus9214 said:
but sir which one I download ??
Click to expand...
Click to collapse
What is your country?

PAKISTAN

Here bro
This is the 4.4.2 update for pakistan
http://www.sammobile.com/firmwares/3/?download=27122
But signup first so you can download the file

RubbaBand said:
Here bro
This is the 4.4.2 update for pakistan
http://www.sammobile.com/firmwares/3/?download=27122
But signup first so you can download the file
Click to expand...
Click to collapse
thanks, downloading after I install it .. whats this ?
Then select AP and search for the extracted firmware.tar.md5 ??

sorry stupid question. after the finish the installation it will be on stock recovery and stock kernal as well ?? can u share the root link as well?

annus9214 said:
thanks, downloading after I install it .. whats this ?
Then select AP and search for the extracted firmware.tar.md5 ??
Click to expand...
Click to collapse
The downloaded firmware will be a .zip file
You need to extract it with winrar or winzip
After that open the downloaded program "Odin" and select the option "AP"
then search for tha extracted firmware folder
And select the file
Then go phone download mode and connect you phone to pc via usb cable
And hit "START"
---------- Post added at 10:22 PM ---------- Previous post was at 10:21 PM ----------
annus9214 said:
sorry stupid question. after the finish the installation it will be on stock recovery and stock kernal as well ?? can u share the root link as well?
Click to expand...
Click to collapse
Yes it will be 100% stock
And after you done with this tell me so I can tell you how to root your phone

RubbaBand said:
Here bro
This is the 4.4.2 update for pakistan
http://www.sammobile.com/firmwares/3/?download=27122
But signup first so you can download the file
Click to expand...
Click to collapse
RubbaBand said:
The downloaded firmware will be a .zip file
You need to extract it with winrar or winzip
After that open the downloaded program "Odin" and select the option "AP"
then search for tha extracted firmware folder
And select the file
Then go phone download mode and connect you phone to pc via usb cable
And hit "START"
---------- Post added at 10:22 PM ---------- Previous post was at 10:21 PM ----------
Yes it will be 100% stock
And after you done with this tell me so I can tell you how to root your phone
Click to expand...
Click to collapse
its done 100% now how to root ??

annus9214 said:
its done 100% now how to root ??
Click to expand...
Click to collapse
Note that you will trip knox!!!
Download "Touch Philz Recovery" for gt-i9500
Then connect your phone to pc and flash the Recovery file via "Odin"
Then go to recovery
Then go to Philz Settings >> re-root system >> yes apply (supersu)
Then reboot
Then download "SuperSu" from Google play
Open the app and he will ask you how do you want to update binary? Just click on Normal
And reboot

RubbaBand said:
Note that you will trip knox!!!
Download "Touch Philz Recovery" for gt-i9500
Then connect your phone to pc and flash the Recovery file via "Odin"
Then go to recovery
Then go to Philz Settings >> re-root system >> yes apply (supersu)
Then reboot
Then download "SuperSu" from Google play
Open the app and he will ask you how do you want to update binary? Just click on Normal
And reboot
Click to expand...
Click to collapse
from where I can get Touch Philz Recovery?

and give me the best kernal link for s4 please

annus9214 said:
from where I can get Touch Philz Recovery?
Click to expand...
Click to collapse
Search on google

i had problems with internal storage with jb 4.3 after root so I installed this kernal and its worked for me!
GT-I9500_Adam_Kernel.V3.5.CWM

annus9214 said:
i had problems with internal storage with jb 4.3 after root so I installed this kernal and its worked for me!
GT-I9500_Adam_Kernel.V3.5.CWM
Click to expand...
Click to collapse
I dont think you will need a kernel for this Rom
But If you had one
Try this
http://forum.xda-developers.com/showthread.php?t=2272602

flashing a different country stock firmware through odin will trip my knox counter ? i wanna get rid of my ****ty carrier apps

is it ok to install Wanam Xposed on stock kernel ? without facing any Problem?

[HELP]My Phone still bootloop after Flash[HELP]

Anyone please help me
my Samsung note 4 still bootloop after flash stock rom
i already tried different stock rom
but its the same still bootloop
now i cant charge my Samsung note 4
but still can use "Download Mode"
but the "recovery mode" is not working
Please help
My Samsung note 4 Model: SM-N910G
Baseband Version: Unknown
Question: can i flash any baseband version?
please HELP

spleken001 said:
Anyone please help me
my Samsung note 4 still bootloop after flash stock rom
i already tried different stock rom
but its the same still bootloop
now i cant charge my Samsung note 4
but still can use "Download Mode"
but the "recovery mode" is not working
Please help
My Samsung note 4 Model: SM-N910G
Baseband Version: Unknown
Question: can i flash any baseband version?
please HELP
Click to expand...
Click to collapse
Flash this repair firmware via odin.this firmware comes with 5 files BL/AP/CP/CSC/PIT.
This is 5.0.1 lollipop firmware BTW but once your device is fully recovered you can take OTA update or flash 6.0.1 afterwards.
https://androidfilehost.com/?fid=24411628330025773
Open odin "run as administrator"
upload all files in odin 1 by 1
Connect device and start flash.
After odin show pass go to recovery and do factory reset/wipe cache.
Reboot and wait 5 to 10 minutes.
2nd option is you can flash twrp recovery and flash a custom rom.
Hopefully this will work otherwise your EFS partition could be corrupted.

Trex888 said:
Flash this repair firmware via odin.this firmware comes with 5 files BL/AP/CP/CSC/PIT.
This is 5.0.1 lollipop firmware BTW but once your device is fully recovered you can take OTA update or flash 6.0.1 afterwards.
https://androidfilehost.com/?fid=24411628330025773
Open odin "run as administrator"
upload all files in odin 1 by 1
Connect device and start flash.
After odin show pass go to recovery and do factory reset/wipe cache.
Reboot and wait 5 to 10 minutes.
2nd option is you can flash twrp recovery and flash a custom rom.
Hopefully this will work otherwise your EFS partition could be corrupted.
Click to expand...
Click to collapse
hi
thanks i will try this tomorrow
my phone is sick
i dont know how to charge it hahaha

Trex888 said:
Flash this repair firmware via odin.this firmware comes with 5 files BL/AP/CP/CSC/PIT.
This is 5.0.1 lollipop firmware BTW but once your device is fully recovered you can take OTA update or flash 6.0.1 afterwards.
https://androidfilehost.com/?fid=24411628330025773
Open odin "run as administrator"
upload all files in odin 1 by 1
Connect device and start flash.
After odin show pass go to recovery and do factory reset/wipe cache.
Reboot and wait 5 to 10 minutes.
2nd option is you can flash twrp recovery and flash a custom rom.
Hopefully this will work otherwise your EFS partition could be corrupted.
Click to expand...
Click to collapse
sir trexx can you also give me a link for SM-N910C version.. thanks

Jr0m said:
sir trexx can you also give me a link for SM-N910C version.. thanks
Click to expand...
Click to collapse
Here you go repair firmware for SM-N910C
https://androidfilehost.com/?fid=24269982087001472

Trex888 said:
Here you go repair firmware for SM-N910C
https://androidfilehost.com/?fid=24269982087001472
Click to expand...
Click to collapse
sir help please
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

spleken001 said:
sir help please
Click to expand...
Click to collapse
Fladh twrp and try different custom roms.

sir trexx can you also give me a link for SM-T719Y version.. thanks

spleken001 said:
Anyone please help me
my Samsung note 4 still bootloop after flash stock rom
i already tried different stock rom
but its the same still bootloop
now i cant charge my Samsung note 4
but still can use "Download Mode"
but the "recovery mode" is not working
Please help
My Samsung note 4 Model: SM-N910G
Baseband Version: Unknown
Question: can i flash any baseband version?
please HELP
Click to expand...
Click to collapse
After flashing stock, go to recovery and wipe data.
After that reboot.
It might work.

Dheway said:
sir trexx can you also give me a link for SM-T719Y version.. thanks
Click to expand...
Click to collapse
Are you aware that we are in a forum for Galaxy Note4 aka N910*?
Anyway, here is your link:
https://www.sammobile.com/samsung/galaxy-tab-s2/firmware/#SM-T719Y
Need an account for downloading.

I put my phone in a bootloop.

Yesterday I tried rooting my Samsung Galaxy S7 Edge using Odin CF autoroot with no experience at all. I did something wrong. When it wouldn't work at first and kept giving an error and "FAIL!" message I tried checking for the correct firmware so I googled my model number and found the one for my phone and downloaded it. I'm not sure what I did but my phone is in a bootloop whenever I turn it on and I can't go to recover mode, only download mode. How do I reinstall the correct firmware?
Please help me fix this. Hopefully I won't have to go to a store for repair...

Well u simply
1) go to sammobile
2) find ur model
3) download the latest firmware
4) extract the firmware
5) put the phone in download mode
6) open odin
7) connect phone
8) upload the extracted files to odin into there respective places
9) flash
the phone will automatically reboot after flashing is complete
NOTE: just be sure to flash model specific firmware.

flash stock rom with odin or use samsung software to fully restore original firmware

Alecia1212 said:
Well u simply
1) go to sammobile
2) find ur model
3) download the latest firmware
4) extract the firmware
5) put the phone in download mode
6) open odin
7) connect phone
8) upload the extracted files to odin into there respective places
9) flash
the phone will automatically reboot after flashing is complete
NOTE: just be sure to flash model specific firmware.
Click to expand...
Click to collapse
If I find the correct firmware will it just overwrite or must I remove the current one? I honestly have no idea how this works.

I had this problem once, you need to flash them Individually, one checkbox at per flash. The way to root ur phone should be magisk manager or supersu. First off you need twrp which is 3.2.1.1 that auto root thing in Odin doesn't work. Some custom rooms already have options for root so if ur a beginner it's best u try them.
---------- Post added at 11:09 PM ---------- Previous post was at 11:02 PM ----------
https://dl.twrp.me/hero2lte/twrp-3.2.1-1-hero2lte.img.tar.html
Flash this as ap it's a custom recovery that everyone uses here. Then use the keys power home vol down to force restart ur phone. Then power home vol up the moment it restarts to reach recovery. wipe everything then Flash a custom rom from the forums. I understand ur frustration that the phone has no way to turn off at all

When I try to flash the twrp-3.2.1-1-hero2lte.img.tar.md5 file Odin stops responding.

Don't flash Md5.
Flash the .tar file.

pingufanpoy said:
Don't flash Md5.
Flash the .tar file.
Click to expand...
Click to collapse
The non md5 download only has a recovery.img file which won't go into AP.

u flash it as a tar file not as the img file, you cant use .img files in odin
do not extract the img just flash the tar.
Btw in Odin the autoreboot and freset time don't matter they don't do anything because if you still don't have an os or recovery it will still send u to dl mode.
once u flash twrp it will automatically boot into recovery no need to hold keys. Then wipe ur phone and install either batman rom (an s8 port with Bixby) or superman rom (stock s7 edge firmware) both have customized installers that allow u to choose addons features and root.
U install custom roms by going to install button then selecting the zip. Also 2 main kernels that most people use are tgp kernel and superstock kernel.

dude, you're so smart, dont know what you're doing and you flash something without any knowledge and preparation...
that situation is fully on you

https://prnt.sc/iyosdg
I can't flash this.
https://prnt.sc/iyot25
Or this.

recovery.img comes in a .zip and nothing else is in it. If I don't extract it how do I flash it?? The .zip doesn't show up as an option in AP.

Deksastara said:
recovery.img comes in a .zip and nothing else is in it. If I don't extract it how do I flash it?? The .zip doesn't show up as an option in AP.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Now Odin isn't detecting my phone in download mode. When it's in the bootloop Odin adds and removes it repeatedly.

Deksastara said:
Now Odin isn't detecting my phone in download mode. When it's in the bootloop Odin adds and removes it repeatedly.
Click to expand...
Click to collapse
if u flashed it with a green pass, u should be able to boot into custom recovery
power home and volume down for force restart
when phone shows s7 logo, power home vol up to reach recovery

It hasn't flashed. It stays on file analysis for hours.

It does that if your phone is disconnected and reconnected. Download the official Samsung USB drivers.
https://samsung-usb-driver-for-mobile-phones.en.lo4d.com/download

http://prntscr.com/iz109e
I've installed the driver. How long should this take? It isn't saying disconnected.

Flashing a custom recovery should only take 10 seconds. Custom rom 10 minutes. What is the model of your phone check the back of ur phone.

pingufanpoy said:
Flashing a custom recovery should only take 10 seconds. Custom rom 10 minutes. What is the model of your phone check the back of ur phone.
Click to expand...
Click to collapse
G935P.
It stays on "File analysis." Does this mean I don't have the right driver? If so, how do I find it? I downloaded the one from the link you shared.

Odin FAIL at modem.bin with genuine firmware for S6 edge+ (G928F)

Hi folks,
I am trying to flash this firmware onto my s6 edge+
G928FXXS5CRH1_G928FDBT4CRF1_DBT (newest samsung official binary)
but Odin will FAIL right after modem.bin (see screenshot)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't know why this happens Please help to find out.
Before I tried to flash the firmware mentioned above, another samsung official was installed:
G928FXXU4CRF4_G928FOXA4CRE1_BTU
Now any attempt to flash former binary will also fail (because older bootloader??)
I'm stuck here Please help!

m0tt3 said:
Hi folks,
I am trying to flash this firmware onto my s6 edge+
G928FXXS5CRH1_G928FDBT4CRF1_DBT (newest samsung official binary)
but Odin will FAIL right after modem.bin (see screenshot)
I don't know why this happens Please help to find out.
Before I tried to flash the firmware mentioned above, another samsung official was installed:
G928FXXU4CRF4_G928FOXA4CRE1_BTU
Now any attempt to flash former binary will also fail (because older bootloader??)
I'm stuck here Please help!
Click to expand...
Click to collapse
I have the same problem with that file : THL-G928CXXS4CRF5-20180705114510.zip it worked before, but not anymore, my device is softbricked.

chongtak said:
I have the same problem with that file : THL-G928CXXS4CRF5-20180705114510.zip it worked before, but not anymore, my device is softbricked.
Click to expand...
Click to collapse
Which version is currently installed? (you can check it in recovery mode)
Most likely you are not able to install former version because it has an older bootloader.
In my case "S5" ist installed, so I am not able to downgrade to "U4", which was installed before

m0tt3 said:
Hi folks,
I am trying to flash this firmware onto my s6 edge+
G928FXXS5CRH1_G928FDBT4CRF1_DBT (newest samsung official binary)
but Odin will FAIL right after modem.bin (see screenshot)
I don't know why this happens Please help to find out.
Before I tried to flash the firmware mentioned above, another samsung official was installed:
G928FXXU4CRF4_G928FOXA4CRE1_BTU
Now any attempt to flash former binary will also fail (because older bootloader??)
I'm stuck here Please help!
Click to expand...
Click to collapse
Use samfirm for your newest firmware and use the region option for your current region. (it should work properly) if you get hidden.img failure, remove from package and repack .tar

Use updato.com to download latest firmware with full speed download.

I'm having the same issue. I wiped everything with TWRP and was going to reinstall the OS, but I'm getting the same fail as you do. I'm trying to flash the same version as I did before wiping everything.
Any ideas?

WVWVWVW said:
I'm having the same issue. I wiped everything with TWRP and was going to reinstall the OS, but I'm getting the same fail as you do. I'm trying to flash the same version as I did before wiping everything.
Any ideas?
Click to expand...
Click to collapse
Got this fixed by removing hidden.img from the file I was flashing

WVWVWVW said:
Got this fixed by removing hidden.img from the file I was flashing
Click to expand...
Click to collapse
You just saved me! Thanks a lot! I thought I was stuck on CM 14.1. Just removing hidden.img fixed my flashing issues.

same here always stuck or error on modem.img so after unclick hidden.img use z3x it worked mine is G928GUBS5CRH1

Or you can try with this. Fix the phone is bricked, black screen and more by flash a new ROM for Samsung Galaxy phone. Maybe not the newest firmware, but works perfectly.
https://www.youtube.com/watch?v=zXSHe3oorIM

I have better solution download this stock rom this is the latest and its binary 5 the latest one
Stock Rom:*SM-G928F_G928FXXU5CRI1_G928FDDX4CRF1_4Files_7.0.rar
Size: 2.0 GB
Security Patch Level: U5
Android:*7.0 Nougat
Model: SM-G928F
Model Name: Samsung Galaxy S6 EDGE+
Download this rom from site FirmwareX.net
Try will work for u

Purpp said:
Use samfirm for your newest firmware and use the region option for your current region. (it should work properly) if you get hidden.img failure, remove from package and repack .tar
Click to expand...
Click to collapse
hii i got same problem how to remove and repack wicht too did you used