[Q] advent vega taking its time - Vega General

Hi All
My vega died last night it was running vegabean. So i thought i know i will flash a new rom went for cyanagen mod 10.1 and gapps.
Well thats where it all went wrong. Now I cant flash any rom it takes about an hour to go through the process then comes back with an error message.1st one was USB device not connected sorted that one.
I have formatted my 16 gb card to fat 32
reloaded USB drivers
Tried original rom also modaco custom rom
Now trying vegabean nv flash RC2.exe this is stuck on creating partitioning UDA
Any Ideas PLEASE

Ist sounds like the same Problems like me: check it out: http://forum.xda-developers.com/showpost.php?p=36124362&postcount=4

Related

HTC Hero does not detect PC connection - MoDaCo Rom 2.9

my problem is other way around!
My HTC Hero doesn't detect PC Connection when I connect it using USB cable. Doesnt matter whether I connect USB cable to charger or PC the charging LED turns on.
I had MoDaCo 2.7 rom previously and it was working perfectly, once I upgrade some apps using Android Market (using 3G) after that I connected hero to PC and nothing happen.
I upgrade the rom to MoDaCo 2.9 and new radio file, no success.
Wipe EXT and reinstall MoDaCo 2.9 and new radio file, no success.
I think it should be software problem not a hardware problem, since when I m in "fastboot (PWR + BACK)" when I connect USB cable it should USB in RED color in front of FASTBOOT.
please help! any idea? suggestion?
Did you mount the SD card to USB from the Hero?
My problem is that it doesnt show me any mount option at all!
it used to when connected shows some USB PC Connection icon in shade bar on top left of screen sp I scroll it down click on it and tap on mount button. but now nothing happen! shows nothing! it is like my Hero doesnt detect PC connection and just charges.
Any one has same problem with MoDaco Roms? is it because of Roms?
Today I booted into fastboot and when I ran "fastboot devices" command on my PC I can see name of my device on PC. also on Hero I can see a text in red "FASTBOOT USB" can I do something here to fix my problem?
I used GParted to merge Fat32 Ex3 and Swap partitions on SD card and make it as one Fat32 partition... reformat SD card... still when I connect Hero to PC this error pop up "USB Device not recognised!"
Downgrade my radio to 63.18.55.06EU_6.35.06.18
Downgrade the rom to MoDaco v2.5
USB Device Not recognized disappeared! and nothing happen...
no success!
Restore to Original backup using Nandroid Restore 2.2.
no success!
usb connect
Hi
for me with Rom modaco 2.9 usb detection ok i can mount sd but i have lost the HTC sync use. (All working with the last modaco rom).
so you used to have same problem? did u wipe data before rom upgrade? did u install new radio?
thus usb problem seems to be becoming a common virus for hero. previously we had 2-3 users with same prob. now another 1. man this is scarry. i imported my hero and dont have warranty. so anything happens to me hero i am ruined.
Yeah! it is a annoying problem... I found some other people in other forum they have same problem...currently no solution... I ll ship back my phone for warranty, maybe they change the motherboard for me. but I feel like it is not a hardware problem since in fastboot not only PC detect my hero but also I can run fastboot commands.
it is good to inform people who are going to buy hero from Ebay to be carful especially those in HK, this problem is popular among them. mine was shipped from there.
pi3ch said:
Yeah! it is a annoying problem... I found some other people in other forum they have same problem...currently no solution... I ll ship back my phone for warranty, maybe they change the motherboard for me. but I feel like it is not a hardware problem since in fastboot not only PC detect my hero but also I can run fastboot commands.
it is good to inform people who are going to buy hero from Ebay to be carful especially those in HK, this problem is popular among them. mine was shipped from there.
Click to expand...
Click to collapse
bro did u try flashing to all other firmwares available? a diff rom might solve the prob. just a thought.
The problem happen after I upgrade some application while I was using MoDaco 2.3 Rom. Then I flashed MoDaCo 2.9 Rom with new radio then I downgraded to MoDaco 2.5 (I read in other post that this version of rom can solve the problem) and then I restore my original back which contain original rom came from factory... all same result without any different. Now I m using modaco 2.9 with last radio I dont know any other rom that I can try...
pi3ch said:
The problem happen after I upgrade some application while I was using MoDaco 2.3 Rom. Then I flashed MoDaCo 2.9 Rom with new radio then I downgraded to MoDaco 2.5 (I read in other post that this version of rom can solve the problem) and then I restore my original back which contain original rom came from factory... all same result without any different. Now I m using modaco 2.9 with last radio I dont know any other rom that I can try...
Click to expand...
Click to collapse
bro cud u plz try modaco 2.8?
my wifi stops working with dhcp in modaco 2.7 and 2.9. modaco 2.6 and 2.8 gives me auto ip from dhcp. so i use modaco 2.8.
I flashed v2.8... same result still cannot detect pc connection! I m going to flash one of the original roms and ship it back...
still I feel like it is a software problem... some directories need to be flashed or reset... perhaps some directories not reset even you flash new rom... anyone has any idea about that?
Hi,
Any news about this lack of USB conexion ?
Same problem with my 32A Magic (Sapphire)
Fastboot USB is ok, but no USB on any ROM
mika91 said:
Hi,
Any news about this lack of USB conexion ?
Same problem with my 32A Magic (Sapphire)
Fastboot USB is ok, but no USB on any ROM
Click to expand...
Click to collapse
OH! this problem is spreading!
Can you please tell what happen to your Magic then you get this problem? since still there is not actual solution for that. you can try solution mentioned here: http://forum.xda-developers.com/showpost.php?p=4837803&postcount=18 if not just ship back your Magic for warrany: http://forum.xda-developers.com/showpost.php?p=4965845&postcount=39
I am having this too, and I'm on the original Orange ROM (after being on 2.2 a while back).
A presumed it was a windows 7 issue, since that is the only thing to have changed for me since I flashed last time.
I don't know what happens.
One day it was working, and the day after, not !!!
I'm using win xp3, but I tried to connect this week-end into win 7.
And the problem appeared during the week-end.
So this is maybe a way to investigate !

[Q] Nand fails to boot- Kernel fails to open

Been running dual boot system for over 6months no issues flashing either WINMO or Adroid. Everthing worked o.k.. Then moved into NAND but message says Kernel failto=ed to open. I thought maybe it was me. Did it again failed. I tried CWR partitioning and still failed. I've tried 3 different ROMs and no boot.
I tried to even go back to SD boot with old stable Rom and now I can't load ANY Android ROM. I boots to green splash screen and then back into WINMO.
Days spent on this need a seperate set of eyes. WINMO roms all boot just fine.
Did you follow the step-by-step guide from this post [URL="http://forum.xda-developers.com/showthread.php?t=893948] [GUIDE] Flashing Your First HD2 NAND Android Rom [For Newbs][/URL], try downloading all the files again any give it another go and make sure to follow the instructions in the link above. I hope you get to fix it.
That was the guide I used, and everything went as planned but no kernel opened. Will try again. Right now NO Android roms wil boot from SD card even after installing a new class 4 card and full FAT format. I guess if it's not broke don't mess with it.
did u format it to fat32 and put it as primary?

[Q] Bricked?

Hey guys, I need some help with my shiny new brick. So I had android running on the phone from nand. So one day while using it, I decided to clear my information from it within android (Settings>Privacy>Factory Data reset). Anyway, this completely F'd my phone. So what I did was try to install a new nand android rom, but that did'nt work either. So then I said let me go back to windows mobile. THAT WONT WORK EITHER!!!
Where I am now:
HSPL installation is successful when I try it (spl version 2.0.8)
Windows mobile stock 6.5 gets stuck at 8%
Task 29% gets stuck at 0%
flashing any rom from the sd card doesnt work either
I feel like I've tried every approach, to no avail. I've read over every thread known to man with this problem, no answer. They all say either task 29 or flash the stock rom, neither of which are working here.
Currently the phone gets stuck on the Stick together screen, then just resets again.
Any ideas? Any help would be much appreciated.
Thanks!
Question... was it a recovery zip or direct nand rom?
Try reformatting the SD card fat32 from the computer, write a fresh image file to it and try to flash from SD again. I don't know why but if I don't reformat the SD card each time, my HD2 never takes a flash. It might not work for you, but it's worth a try. I hope it helps.

Boot Loop, Can be half-fixed. need solution.

Hello, I know that you might yell at me for not searching forums but I tried! but I have a somewhat unique problem.
The problem is that my DHD bootloops on any Custom Rom. (I seriouly mean ANY)
I can stock it with RUU file on my 8GB SD Card. but the problem is that I want to use a custom rom for non-froyo + root.
so what basicly happens is that it fails horribly on flashing custom roms, I believe the fault might be due to SD Card (the 16GB SD Card I use for normal + custom rom use) so I will try out the 8GB SD card to flash a custom rom this evening. but the problem that happens each time I try to flash a custom rom of the 16GB SD card is that I get HTC/White Screen Boot Loop. It is a infinite boot loop, I tried installing more than 10 different roms. (different versions, and different roms) I even tried to install a rom that worked earlier (don't ask me why I wanted another rom, I just felt like it)
so anyone have solutions?
I'll try these today: flash off my 8GB, remove sd card after flash before boot (seen topics that might help it)
but so far this problem has happend all the time since I got the DHD.... stupid phone give me some slack already!
Solved
Solved
Well, I could successfully install a new rom (Tried Beat Bliss Sense 3.5)
and removed SDcard before reboot and it worked perfectly thought my settings does fc all the time (so Can't use settings at all) so gonna flash something else.
so I have learned that my 16GB sd card is so faulty that it cannot install a custom rom not even a stock RUU (since PD98.img failed before on the 16GB) but oddly enough I dont have problems with media so I can use it as my media/app card while I use my 8GB card as rom flasher. thanks anyway if anyone had a solution in their mind (even if it was the same one)
well in short my 16GB SD card seems faulty some or other way. in some parts

[Q] Can't mount sd card from 2nd-Init?

Hello, I'm new to the flashing scene. But basically, I am trying to get a custom ROM on my phone, hopefully as painlessly as possible.
I recently reflashed a stock ROM(which isn't quite correct because my camera doesn't work). Afterwards, I rooted it and all that jazz.
Then I went to getting 2nd Init installed. I used the APKs available on this forum. The latest version didn't work(after rebooting, the LED never turned blue). I then went to v1.8. I installed the stable bootmenu(0.6).
With this one, I finally got the blue LED and got to a boot menu. I went to custom recovery. I tried to take a backup and got a "cannot mount /sdcard" error.
Has anyone else had this problem and know any way to fix it?
Stock ROM is "2.1-Update1".
MB525 Red lens, T-Mobile US
You need to flash a 2.2 stock sbf, as there is an issue with Eclair... CEE or Nordic Froyo is a good base to start with. Flash one of the sbf's mentioned above (hope you haven't flashed a Defy+ sbf, since you mentioned your camera doesn't work...)
After flashing one of the SBF's that I mentioned, install 2nd-init 2.0, intsll LATEST bootmenu and take it from there.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
may be the sd card
earlz83 said:
Hello, I'm new to the flashing scene. But basically, I am trying to get a custom ROM on my phone, hopefully as painlessly as possible.
I recently reflashed a stock ROM(which isn't quite correct because my camera doesn't work). Afterwards, I rooted it and all that jazz.
Then I went to getting 2nd Init installed. I used the APKs available on this forum. The latest version didn't work(after rebooting, the LED never turned blue). I then went to v1.8. I installed the stable bootmenu(0.6).
With this one, I finally got the blue LED and got to a boot menu. I went to custom recovery. I tried to take a backup and got a "cannot mount /sdcard" error.
Stock ROM is "2.1-Update1".
MB525 Red lens, T-Mobile US
Click to expand...
Click to collapse
try another SD card , it helps some times

Categories

Resources